[ARM] pxa: move common MFP handling code into plat-pxa

Signed-off-by: Eric Miao <eric.miao@marvell.com>

3 files changed, 648 insertions, 1 deletions

diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index b837df44048..4be37235f57 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -2,6 +2,6 @@
 # Makefile for code common across different PXA processor families
 #
 
-obj-y	:= dma.o
+obj-y	:= dma.o mfp.o
 
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
new file mode 100644
index 00000000000..a22229cde09
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -0,0 +1,369 @@
+/*
+ * arch/arm/plat-pxa/include/plat/mfp.h
+ *
+ *   Common Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ *            initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_MFP_H
+#define __ASM_PLAT_MFP_H
+
+#define mfp_to_gpio(m)	((m) % 128)
+
+/* list of all the configurable MFP pins */
+enum {
+	MFP_PIN_INVALID = -1,
+
+	MFP_PIN_GPIO0 = 0,
+	MFP_PIN_GPIO1,
+	MFP_PIN_GPIO2,
+	MFP_PIN_GPIO3,
+	MFP_PIN_GPIO4,
+	MFP_PIN_GPIO5,
+	MFP_PIN_GPIO6,
+	MFP_PIN_GPIO7,
+	MFP_PIN_GPIO8,
+	MFP_PIN_GPIO9,
+	MFP_PIN_GPIO10,
+	MFP_PIN_GPIO11,
+	MFP_PIN_GPIO12,
+	MFP_PIN_GPIO13,
+	MFP_PIN_GPIO14,
+	MFP_PIN_GPIO15,
+	MFP_PIN_GPIO16,
+	MFP_PIN_GPIO17,
+	MFP_PIN_GPIO18,
+	MFP_PIN_GPIO19,
+	MFP_PIN_GPIO20,
+	MFP_PIN_GPIO21,
+	MFP_PIN_GPIO22,
+	MFP_PIN_GPIO23,
+	MFP_PIN_GPIO24,
+	MFP_PIN_GPIO25,
+	MFP_PIN_GPIO26,
+	MFP_PIN_GPIO27,
+	MFP_PIN_GPIO28,
+	MFP_PIN_GPIO29,
+	MFP_PIN_GPIO30,
+	MFP_PIN_GPIO31,
+	MFP_PIN_GPIO32,
+	MFP_PIN_GPIO33,
+	MFP_PIN_GPIO34,
+	MFP_PIN_GPIO35,
+	MFP_PIN_GPIO36,
+	MFP_PIN_GPIO37,
+	MFP_PIN_GPIO38,
+	MFP_PIN_GPIO39,
+	MFP_PIN_GPIO40,
+	MFP_PIN_GPIO41,
+	MFP_PIN_GPIO42,
+	MFP_PIN_GPIO43,
+	MFP_PIN_GPIO44,
+	MFP_PIN_GPIO45,
+	MFP_PIN_GPIO46,
+	MFP_PIN_GPIO47,
+	MFP_PIN_GPIO48,
+	MFP_PIN_GPIO49,
+	MFP_PIN_GPIO50,
+	MFP_PIN_GPIO51,
+	MFP_PIN_GPIO52,
+	MFP_PIN_GPIO53,
+	MFP_PIN_GPIO54,
+	MFP_PIN_GPIO55,
+	MFP_PIN_GPIO56,
+	MFP_PIN_GPIO57,
+	MFP_PIN_GPIO58,
+	MFP_PIN_GPIO59,
+	MFP_PIN_GPIO60,
+	MFP_PIN_GPIO61,
+	MFP_PIN_GPIO62,
+	MFP_PIN_GPIO63,
+	MFP_PIN_GPIO64,
+	MFP_PIN_GPIO65,
+	MFP_PIN_GPIO66,
+	MFP_PIN_GPIO67,
+	MFP_PIN_GPIO68,
+	MFP_PIN_GPIO69,
+	MFP_PIN_GPIO70,
+	MFP_PIN_GPIO71,
+	MFP_PIN_GPIO72,
+	MFP_PIN_GPIO73,
+	MFP_PIN_GPIO74,
+	MFP_PIN_GPIO75,
+	MFP_PIN_GPIO76,
+	MFP_PIN_GPIO77,
+	MFP_PIN_GPIO78,
+	MFP_PIN_GPIO79,
+	MFP_PIN_GPIO80,
+	MFP_PIN_GPIO81,
+	MFP_PIN_GPIO82,
+	MFP_PIN_GPIO83,
+	MFP_PIN_GPIO84,
+	MFP_PIN_GPIO85,
+	MFP_PIN_GPIO86,
+	MFP_PIN_GPIO87,
+	MFP_PIN_GPIO88,
+	MFP_PIN_GPIO89,
+	MFP_PIN_GPIO90,
+	MFP_PIN_GPIO91,
+	MFP_PIN_GPIO92,
+	MFP_PIN_GPIO93,
+	MFP_PIN_GPIO94,
+	MFP_PIN_GPIO95,
+	MFP_PIN_GPIO96,
+	MFP_PIN_GPIO97,
+	MFP_PIN_GPIO98,
+	MFP_PIN_GPIO99,
+	MFP_PIN_GPIO100,
+	MFP_PIN_GPIO101,
+	MFP_PIN_GPIO102,
+	MFP_PIN_GPIO103,
+	MFP_PIN_GPIO104,
+	MFP_PIN_GPIO105,
+	MFP_PIN_GPIO106,
+	MFP_PIN_GPIO107,
+	MFP_PIN_GPIO108,
+	MFP_PIN_GPIO109,
+	MFP_PIN_GPIO110,
+	MFP_PIN_GPIO111,
+	MFP_PIN_GPIO112,
+	MFP_PIN_GPIO113,
+	MFP_PIN_GPIO114,
+	MFP_PIN_GPIO115,
+	MFP_PIN_GPIO116,
+	MFP_PIN_GPIO117,
+	MFP_PIN_GPIO118,
+	MFP_PIN_GPIO119,
+	MFP_PIN_GPIO120,
+	MFP_PIN_GPIO121,
+	MFP_PIN_GPIO122,
+	MFP_PIN_GPIO123,
+	MFP_PIN_GPIO124,
+	MFP_PIN_GPIO125,
+	MFP_PIN_GPIO126,
+	MFP_PIN_GPIO127,
+	MFP_PIN_GPIO0_2,
+	MFP_PIN_GPIO1_2,
+	MFP_PIN_GPIO2_2,
+	MFP_PIN_GPIO3_2,
+	MFP_PIN_GPIO4_2,
+	MFP_PIN_GPIO5_2,
+	MFP_PIN_GPIO6_2,
+	MFP_PIN_GPIO7_2,
+	MFP_PIN_GPIO8_2,
+	MFP_PIN_GPIO9_2,
+	MFP_PIN_GPIO10_2,
+	MFP_PIN_GPIO11_2,
+	MFP_PIN_GPIO12_2,
+	MFP_PIN_GPIO13_2,
+	MFP_PIN_GPIO14_2,
+	MFP_PIN_GPIO15_2,
+	MFP_PIN_GPIO16_2,
+	MFP_PIN_GPIO17_2,
+
+	MFP_PIN_ULPI_STP,
+	MFP_PIN_ULPI_NXT,
+	MFP_PIN_ULPI_DIR,
+
+	MFP_PIN_nXCVREN,
+	MFP_PIN_DF_CLE_nOE,
+	MFP_PIN_DF_nADV1_ALE,
+	MFP_PIN_DF_SCLK_E,
+	MFP_PIN_DF_SCLK_S,
+	MFP_PIN_nBE0,
+	MFP_PIN_nBE1,
+	MFP_PIN_DF_nADV2_ALE,
+	MFP_PIN_DF_INT_RnB,
+	MFP_PIN_DF_nCS0,
+	MFP_PIN_DF_nCS1,
+	MFP_PIN_nLUA,
+	MFP_PIN_nLLA,
+	MFP_PIN_DF_nWE,
+	MFP_PIN_DF_ALE_nWE,
+	MFP_PIN_DF_nRE_nOE,
+	MFP_PIN_DF_ADDR0,
+	MFP_PIN_DF_ADDR1,
+	MFP_PIN_DF_ADDR2,
+	MFP_PIN_DF_ADDR3,
+	MFP_PIN_DF_IO0,
+	MFP_PIN_DF_IO1,
+	MFP_PIN_DF_IO2,
+	MFP_PIN_DF_IO3,
+	MFP_PIN_DF_IO4,
+	MFP_PIN_DF_IO5,
+	MFP_PIN_DF_IO6,
+	MFP_PIN_DF_IO7,
+	MFP_PIN_DF_IO8,
+	MFP_PIN_DF_IO9,
+	MFP_PIN_DF_IO10,
+	MFP_PIN_DF_IO11,
+	MFP_PIN_DF_IO12,
+	MFP_PIN_DF_IO13,
+	MFP_PIN_DF_IO14,
+	MFP_PIN_DF_IO15,
+
+	/* additional pins on PXA930 */
+	MFP_PIN_GSIM_UIO,
+	MFP_PIN_GSIM_UCLK,
+	MFP_PIN_GSIM_UDET,
+	MFP_PIN_GSIM_nURST,
+	MFP_PIN_PMIC_INT,
+	MFP_PIN_RDY,
+
+	MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * 		  alternate function = 0,
+ * 		  drive strength = fast 3mA (MFP_DS03X)
+ * 		  low power mode = default
+ * 		  edge detection = none
+ *
+ * MFP_CFG	- default MFPR value with alternate function
+ * MFP_CFG_DRV	- default MFPR value with alternate function and
+ * 		  pin drive strength
+ * MFP_CFG_LPM	- default MFPR value with alternate function and
+ * 		  low power mode
+ * MFP_CFG_X	- default MFPR value with alternate function,
+ * 		  pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x)		((x) & 0x3ff)
+
+#define MFP_AF0			(0x0 << 10)
+#define MFP_AF1			(0x1 << 10)
+#define MFP_AF2			(0x2 << 10)
+#define MFP_AF3			(0x3 << 10)
+#define MFP_AF4			(0x4 << 10)
+#define MFP_AF5			(0x5 << 10)
+#define MFP_AF6			(0x6 << 10)
+#define MFP_AF7			(0x7 << 10)
+#define MFP_AF_MASK		(0x7 << 10)
+#define MFP_AF(x)		(((x) >> 10) & 0x7)
+
+#define MFP_DS01X		(0x0 << 13)
+#define MFP_DS02X		(0x1 << 13)
+#define MFP_DS03X		(0x2 << 13)
+#define MFP_DS04X		(0x3 << 13)
+#define MFP_DS06X		(0x4 << 13)
+#define MFP_DS08X		(0x5 << 13)
+#define MFP_DS10X		(0x6 << 13)
+#define MFP_DS13X		(0x7 << 13)
+#define MFP_DS_MASK		(0x7 << 13)
+#define MFP_DS(x)		(((x) >> 13) & 0x7)
+
+#define MFP_LPM_DEFAULT		(0x0 << 16)
+#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
+#define MFP_LPM_PULL_LOW	(0x3 << 16)
+#define MFP_LPM_PULL_HIGH	(0x4 << 16)
+#define MFP_LPM_FLOAT		(0x5 << 16)
+#define MFP_LPM_INPUT		(0x6 << 16)
+#define MFP_LPM_STATE_MASK	(0x7 << 16)
+#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE	(0x0 << 19)
+#define MFP_LPM_EDGE_RISE	(0x1 << 19)
+#define MFP_LPM_EDGE_FALL	(0x2 << 19)
+#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
+#define MFP_LPM_EDGE_MASK	(0x3 << 19)
+#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE		(0x0 << 21)
+#define MFP_PULL_LOW		(0x1 << 21)
+#define MFP_PULL_HIGH		(0x2 << 21)
+#define MFP_PULL_BOTH		(0x3 << 21)
+#define MFP_PULL_MASK		(0x3 << 21)
+#define MFP_PULL(x)		(((x) >> 21) & 0x3)
+
+#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
+				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af)		\
+	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by mfp_init()
+ *
+ * mfp_init_base() - accepts a virtual base for all MFPR registers and
+ * initialize the MFP table to a default state
+ *
+ * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
+ * represents a range of MFP pins from "start" to "end", with the offset
+ * begining at "offset", to define a single pin, let "end" = -1.
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR()   to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct mfp_addr_map {
+	unsigned int	start;
+	unsigned int	end;
+	unsigned long	offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+	{ MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+	{ MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
+
+void __init mfp_init_base(unsigned long mfpr_base);
+void __init mfp_init_addr(struct mfp_addr_map *map);
+
+/*
+ * mfp_{read, write}()	- for direct read/write access to the MFPR register
+ * mfp_config()		- for configuring a group of MFPR registers
+ * mfp_config_lpm()	- configuring all low power MFPR registers for suspend
+ * mfp_config_run()	- configuring all run time  MFPR registers after resume
+ */
+unsigned long mfp_read(int mfp);
+void mfp_write(int mfp, unsigned long mfpr_val);
+void mfp_config(unsigned long *mfp_cfgs, int num);
+void mfp_config_run(void);
+void mfp_config_lpm(void);
+#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
+
+#endif /* __ASM_PLAT_MFP_H */
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
new file mode 100644
index 00000000000..e716c622a17
--- /dev/null
+++ b/arch/arm/plat-pxa/mfp.c
@@ -0,0 +1,278 @@
+/*
+ * linux/arch/arm/plat-pxa/mfp.c
+ *
+ *   Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+
+#include <plat/mfp.h>
+
+#define MFPR_SIZE	(PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL		(0x1 << 15)
+#define MFPR_PULLUP_EN		(0x1 << 14)
+#define MFPR_PULLDOWN_EN	(0x1 << 13)
+#define MFPR_SLEEP_SEL		(0x1 << 9)
+#define MFPR_SLEEP_OE_N		(0x1 << 7)
+#define MFPR_EDGE_CLEAR		(0x1 << 6)
+#define MFPR_EDGE_FALL_EN	(0x1 << 5)
+#define MFPR_EDGE_RISE_EN	(0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x)	((x) << 8)
+#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE		(0)
+#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFPR_LPM_INPUT		(0)
+#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK		(0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior,  the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition       pull_sel  pullup_en  pulldown_en
+ * MFPR_PULL_NONE       0         0        0
+ * MFPR_PULL_LOW        1         0        1
+ * MFPR_PULL_HIGH       1         1        0
+ * MFPR_PULL_BOTH       1         1        1
+ */
+#define MFPR_PULL_NONE		(0)
+#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+
+/* mfp_spin_lock is used to ensure that MFP register configuration
+ * (most likely a read-modify-write operation) is atomic, and that
+ * mfp_table[] is consistent
+ */
+static DEFINE_SPINLOCK(mfp_spin_lock);
+
+static void __iomem *mfpr_mmio_base;
+
+struct mfp_pin {
+	unsigned long	config;		/* -1 for not configured */
+	unsigned long	mfpr_off;	/* MFPRxx Register offset */
+	unsigned long	mfpr_run;	/* Run-Mode Register Value */
+	unsigned long	mfpr_lpm;	/* Low Power Mode Register Value */
+};
+
+static struct mfp_pin mfp_table[MFP_PIN_MAX];
+
+/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
+static const unsigned long mfpr_lpm[] = {
+	MFPR_LPM_INPUT,
+	MFPR_LPM_DRIVE_LOW,
+	MFPR_LPM_DRIVE_HIGH,
+	MFPR_LPM_PULL_LOW,
+	MFPR_LPM_PULL_HIGH,
+	MFPR_LPM_FLOAT,
+};
+
+/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
+static const unsigned long mfpr_pull[] = {
+	MFPR_PULL_NONE,
+	MFPR_PULL_LOW,
+	MFPR_PULL_HIGH,
+	MFPR_PULL_BOTH,
+};
+
+/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
+static const unsigned long mfpr_edge[] = {
+	MFPR_EDGE_NONE,
+	MFPR_EDGE_RISE,
+	MFPR_EDGE_FALL,
+	MFPR_EDGE_BOTH,
+};
+
+#define mfpr_readl(off)			\
+	__raw_readl(mfpr_mmio_base + (off))
+
+#define mfpr_writel(off, val)		\
+	__raw_writel(val, mfpr_mmio_base + (off))
+
+#define mfp_configured(p)	((p)->config != -1)
+
+/*
+ * perform a read-back of any MFPR register to make sure the
+ * previous writings are finished
+ */
+#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + 0)
+
+static inline void __mfp_config_run(struct mfp_pin *p)
+{
+	if (mfp_configured(p))
+		mfpr_writel(p->mfpr_off, p->mfpr_run);
+}
+
+static inline void __mfp_config_lpm(struct mfp_pin *p)
+{
+	if (mfp_configured(p)) {
+		unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
+		if (mfpr_clr != p->mfpr_run)
+			mfpr_writel(p->mfpr_off, mfpr_clr);
+		if (p->mfpr_lpm != mfpr_clr)
+			mfpr_writel(p->mfpr_off, p->mfpr_lpm);
+	}
+}
+
+void mfp_config(unsigned long *mfp_cfgs, int num)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	for (i = 0; i < num; i++, mfp_cfgs++) {
+		unsigned long tmp, c = *mfp_cfgs;
+		struct mfp_pin *p;
+		int pin, af, drv, lpm, edge, pull;
+
+		pin = MFP_PIN(c);
+		BUG_ON(pin >= MFP_PIN_MAX);
+		p = &mfp_table[pin];
+
+		af  = MFP_AF(c);
+		drv = MFP_DS(c);
+		lpm = MFP_LPM_STATE(c);
+		edge = MFP_LPM_EDGE(c);
+		pull = MFP_PULL(c);
+
+		/* run-mode pull settings will conflict with MFPR bits of
+		 * low power mode state,  calculate mfpr_run and mfpr_lpm
+		 * individually if pull != MFP_PULL_NONE
+		 */
+		tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
+
+		if (likely(pull == MFP_PULL_NONE)) {
+			p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_lpm = p->mfpr_run;
+		} else {
+			p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_run = tmp | mfpr_pull[pull];
+		}
+
+		p->config = c; __mfp_config_run(p);
+	}
+
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+unsigned long mfp_read(int mfp)
+{
+	unsigned long val, flags;
+
+	BUG_ON(mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	val = mfpr_readl(mfp_table[mfp].mfpr_off);
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+
+	return val;
+}
+
+void mfp_write(int mfp, unsigned long val)
+{
+	unsigned long flags;
+
+	BUG_ON(mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	mfpr_writel(mfp_table[mfp].mfpr_off, val);
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init mfp_init_base(unsigned long mfpr_base)
+{
+	int i;
+
+	/* initialize the table with default - unconfigured */
+	for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
+		mfp_table[i].config = -1;
+
+	mfpr_mmio_base = (void __iomem *)mfpr_base;
+}
+
+void __init mfp_init_addr(struct mfp_addr_map *map)
+{
+	struct mfp_addr_map *p;
+	unsigned long offset, flags;
+	int i;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	for (p = map; p->start != MFP_PIN_INVALID; p++) {
+		offset = p->offset;
+		i = p->start;
+
+		do {
+			mfp_table[i].mfpr_off = offset;
+			mfp_table[i].mfpr_run = 0;
+			mfp_table[i].mfpr_lpm = 0;
+			offset += 4; i++;
+		} while ((i <= p->end) && (p->end != -1));
+	}
+
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void mfp_config_lpm(void)
+{
+	struct mfp_pin *p = &mfp_table[0];
+	int pin;
+
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+		__mfp_config_lpm(p);
+}
+
+void mfp_config_run(void)
+{
+	struct mfp_pin *p = &mfp_table[0];
+	int pin;
+
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+		__mfp_config_run(p);
+}