[ARM] S3C24XX: Move initialisation code to arch/arm/plat-s3c

We need to add plat-s3c to the build to get the headers
that will go in here once moved from include/asm-arm so
we may as well put some useful common s3c code in here
to stop the errors generated form having nothing built.

The cpu setup is now passed the cpu idcode and the table
of supported cpus to s3c_init_cpu() to abstract the
cpu identification out of the initial io setup.

As well as moving the cpu initialisation code, we move the
map of the board specific items up to the calling code as
none of the map_io() functions actually do anything other
than pass this to iotable_init().

This patch does not rename any of the init functions that
will be common to s3c24xx and any other s3c architectures
as this can be done at a later date as it will touch all
the board support files which use functions such as
s3c24xx_init_clocks() and s3c24xx_init_uarts().

Note, the header arch/arm/plat-s3c24xx/include/plat/cpu.h
still has functions that are used by both the cpu and
board initialisation functions. This means that each board
has definitions specific to the cpu support included and
the vice-versa.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 3 insertions, 138 deletions

diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 22a329513c0..7a0f494c93b 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -55,16 +55,6 @@
 #include <plat/s3c2442.h>
 #include <plat/s3c2443.h>
 
-struct cpu_table {
-	unsigned long	idcode;
-	unsigned long	idmask;
-	void		(*map_io)(struct map_desc *mach_desc, int size);
-	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
-	void		(*init_clocks)(int xtal);
-	int		(*init)(void);
-	const char	*name;
-};
-
 /* table of supported CPUs */
 
 static const char name_s3c2400[]  = "S3C2400";
@@ -169,23 +159,7 @@ static struct map_desc s3c_iodesc[] __initdata = {
 	IODESC_ENT(UART)
 };
 
-static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode)
-{
-	struct cpu_table *tab;
-	int count;
-
-	tab = cpu_ids;
-	for (count = 0; count < ARRAY_SIZE(cpu_ids); count++, tab++) {
-		if ((idcode & tab->idmask) == tab->idcode)
-			return tab;
-	}
-
-	return NULL;
-}
-
-/* cpu information */
-
-static struct cpu_table *cpu;
+/* read cpu identificaiton code */
 
 static unsigned long s3c24xx_read_idcode_v5(void)
 {
@@ -231,6 +205,7 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 	unsigned long idcode = 0x0;
 
 	/* initialise the io descriptors we need for initialisation */
+	iotable_init(mach_desc, size);
 	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 
 	if (cpu_architecture() >= CPU_ARCH_ARMv5) {
@@ -239,117 +214,7 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 		idcode = s3c24xx_read_idcode_v4();
 	}
 
-	cpu = s3c_lookup_cpu(idcode);
-
-	if (cpu == NULL) {
-		printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
-		panic("Unknown S3C24XX CPU");
-	}
-
-	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
-
-	if (cpu->map_io == NULL || cpu->init == NULL) {
-		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
-		panic("Unsupported S3C24XX CPU");
-	}
-
 	arm_pm_restart = s3c24xx_pm_restart;
 
-	(cpu->map_io)(mach_desc, size);
-}
-
-/* s3c24xx_init_clocks
- *
- * Initialise the clock subsystem and associated information from the
- * given master crystal value.
- *
- * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
- *      != 0 -> PLL crystal value in Hz
-*/
-
-void __init s3c24xx_init_clocks(int xtal)
-{
-	if (xtal == 0)
-		xtal = 12*1000*1000;
-
-	if (cpu == NULL)
-		panic("s3c24xx_init_clocks: no cpu setup?\n");
-
-	if (cpu->init_clocks == NULL)
-		panic("s3c24xx_init_clocks: cpu has no clock init\n");
-	else
-		(cpu->init_clocks)(xtal);
-}
-
-/* uart management */
-
-static int nr_uarts __initdata = 0;
-
-static struct s3c2410_uartcfg uart_cfgs[3];
-
-/* s3c24xx_init_uartdevs
- *
- * copy the specified platform data and configuration into our central
- * set of devices, before the data is thrown away after the init process.
- *
- * This also fills in the array passed to the serial driver for the
- * early initialisation of the console.
-*/
-
-void __init s3c24xx_init_uartdevs(char *name,
-				  struct s3c24xx_uart_resources *res,
-				  struct s3c2410_uartcfg *cfg, int no)
-{
-	struct platform_device *platdev;
-	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
-	struct s3c24xx_uart_resources *resp;
-	int uart;
-
-	memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
-
-	for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
-		platdev = s3c24xx_uart_src[cfgptr->hwport];
-
-		resp = res + cfgptr->hwport;
-
-		s3c24xx_uart_devs[uart] = platdev;
-
-		platdev->name = name;
-		platdev->resource = resp->resources;
-		platdev->num_resources = resp->nr_resources;
-
-		platdev->dev.platform_data = cfgptr;
-	}
-
-	nr_uarts = no;
+	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
-
-void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	if (cpu == NULL)
-		return;
-
-	if (cpu->init_uarts == NULL) {
-		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
-	} else
-		(cpu->init_uarts)(cfg, no);
-}
-
-static int __init s3c_arch_init(void)
-{
-	int ret;
-
-	// do the correct init for cpu
-
-	if (cpu == NULL)
-		panic("s3c_arch_init: NULL cpu\n");
-
-	ret = (cpu->init)();
-	if (ret != 0)
-		return ret;
-
-	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
-	return ret;
-}
-
-arch_initcall(s3c_arch_init);