ARM: SAMSUNG: Remove uart irq handling from plaform code

With uart tx/rx/err interrupt handling moved into the driver for s3c64xx
and later SoC's, the uart interrupt handling in plaform code can be removed.
The uart device irq resources is reduced to one and the related unused
macros are removed.

Suggested-by: Grant Likely <grant.likely@secretlab.ca>
CC: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 34 deletions

diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
index a97c08957f4..afdaa1082b9 100644
--- a/arch/arm/plat-s5p/irq.c
+++ b/arch/arm/plat-s5p/irq.c
@@ -17,42 +17,10 @@
 
 #include <asm/hardware/vic.h>
 
-#include <linux/serial_core.h>
 #include <mach/map.h>
 #include <plat/regs-timer.h>
-#include <plat/regs-serial.h>
 #include <plat/cpu.h>
 #include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-
-/*
- * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct s3c_uart_irq uart_irqs[] = {
-	[0] = {
-		.regs		= S5P_VA_UART0,
-		.base_irq	= IRQ_S5P_UART_BASE0,
-		.parent_irq	= IRQ_UART0,
-	},
-	[1] = {
-		.regs		= S5P_VA_UART1,
-		.base_irq	= IRQ_S5P_UART_BASE1,
-		.parent_irq	= IRQ_UART1,
-	},
-	[2] = {
-		.regs		= S5P_VA_UART2,
-		.base_irq	= IRQ_S5P_UART_BASE2,
-		.parent_irq	= IRQ_UART2,
-	},
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
-	[3] = {
-		.regs		= S5P_VA_UART3,
-		.base_irq	= IRQ_S5P_UART_BASE3,
-		.parent_irq	= IRQ_UART3,
-	},
-#endif
-};
 
 void __init s5p_init_irq(u32 *vic, u32 num_vic)
 {
@@ -65,6 +33,4 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic)
 #endif
 
 	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-
-	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
 }