ARM: S5P: Add support for MFC device

Add support for MFC device to plat-s5p, mach-exynos4, mach-s5pv210:
 - clock support
 - memory mapping and reserving
 - s5p_device_mfc platform device

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

4 files changed, 156 insertions, 1 deletions

diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 7537ad57c7d..9843c954c04 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -76,6 +76,11 @@ config S5P_DEV_FIMD0
 	help
 	  Compile in platform device definitions for FIMD controller 0
 
+config S5P_DEV_MFC
+	bool
+	help
+	  Compile in platform device definitions for MFC
+
 config S5P_DEV_ONENAND
 	bool
 	help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index eec7e24c1a0..4b53e04eeca 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_S5P_HRT) 		+= s5p-time.o
 
 # devices
-
+obj-$(CONFIG_S5P_DEV_MFC)	+= dev-mfc.o
 obj-$(CONFIG_S5P_DEV_FIMC0)	+= dev-fimc0.o
 obj-$(CONFIG_S5P_DEV_FIMC1)	+= dev-fimc1.o
 obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
diff --git a/arch/arm/plat-s5p/dev-mfc.c b/arch/arm/plat-s5p/dev-mfc.c
new file mode 100644
index 00000000000..94226a0010f
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-mfc.c
@@ -0,0 +1,123 @@
+/* linux/arch/arm/plat-s5p/dev-mfc.c
+ *
+ * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
+ *
+ * Base S5P MFC resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/memblock.h>
+#include <linux/ioport.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+#include <plat/irqs.h>
+#include <plat/mfc.h>
+
+static struct resource s5p_mfc_resource[] = {
+	[0] = {
+		.start	= S5P_PA_MFC,
+		.end	= S5P_PA_MFC + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_MFC,
+		.end	= IRQ_MFC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device s5p_device_mfc = {
+	.name		= "s5p-mfc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_mfc_resource),
+	.resource	= s5p_mfc_resource,
+};
+
+/*
+ * MFC hardware has 2 memory interfaces which are modelled as two separate
+ * platform devices to let dma-mapping distinguish between them.
+ *
+ * MFC parent device (s5p_device_mfc) must be registered before memory
+ * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
+ */
+
+static u64 s5p_mfc_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device s5p_device_mfc_l = {
+	.name		= "s5p-mfc-l",
+	.id		= -1,
+	.dev		= {
+		.parent			= &s5p_device_mfc.dev,
+		.dma_mask		= &s5p_mfc_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+struct platform_device s5p_device_mfc_r = {
+	.name		= "s5p-mfc-r",
+	.id		= -1,
+	.dev		= {
+		.parent			= &s5p_device_mfc.dev,
+		.dma_mask		= &s5p_mfc_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+struct s5p_mfc_reserved_mem {
+	phys_addr_t	base;
+	unsigned long	size;
+	struct device	*dev;
+};
+
+static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
+
+void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+				phys_addr_t lbase, unsigned int lsize)
+{
+	int i;
+
+	s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
+	s5p_mfc_mem[0].base = rbase;
+	s5p_mfc_mem[0].size = rsize;
+
+	s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
+	s5p_mfc_mem[1].base = lbase;
+	s5p_mfc_mem[1].size = lsize;
+
+	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
+		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
+		if (memblock_remove(area->base, area->size)) {
+			printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
+			       area->size, (unsigned long) area->base);
+			area->base = 0;
+		}
+	}
+}
+
+static int __init s5p_mfc_memory_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
+		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
+		if (!area->base)
+			continue;
+
+		if (dma_declare_coherent_memory(area->dev, area->base,
+				area->base, area->size,
+				DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0)
+			printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n",
+			       area->size, (unsigned long) area->base);
+	}
+	return 0;
+}
+device_initcall(s5p_mfc_memory_init);
diff --git a/arch/arm/plat-s5p/include/plat/mfc.h b/arch/arm/plat-s5p/include/plat/mfc.h
new file mode 100644
index 00000000000..6697f8cb294
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/mfc.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_S5P_MFC_H
+#define __PLAT_S5P_MFC_H
+
+/**
+ * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
+ * @rbase:	base address for MFC 'right' memory interface
+ * @rsize:	size of the memory reserved for MFC 'right' interface
+ * @lbase:	base address for MFC 'left' memory interface
+ * @lsize:	size of the memory reserved for MFC 'left' interface
+ *
+ * This function reserves system memory for both MFC device memory
+ * interfaces and registers it to respective struct device entries as
+ * coherent memory.
+ */
+void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
+				phys_addr_t lbase, unsigned int lsize);
+
+#endif /* __PLAT_S5P_MFC_H */