Remove the arm26 port

The arm26 port has been in a state where it was far from even compiling
for quite some time.

Ian Molton agreed with the removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 313 deletions

diff --git a/arch/arm26/lib/lib1funcs.S b/arch/arm26/lib/lib1funcs.S
deleted file mode 100644
index 0e29970b0e8..00000000000
--- a/arch/arm26/lib/lib1funcs.S
+++ /dev/null
@@ -1,313 +0,0 @@
-@ libgcc1 routines for ARM cpu.
-@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk)
-
-/* Copyright (C) 1995, 1996, 1998 Free Software Foundation, Inc.
-
-This file is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-In addition to the permissions in the GNU General Public License, the
-Free Software Foundation gives you unlimited permission to link the
-compiled version of this file with other programs, and to distribute
-those programs without any restriction coming from the use of this
-file.  (The General Public License restrictions do apply in other
-respects; for example, they cover modification of the file, and
-distribution when not linked into another program.)
-
-This file is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* This code is derived from gcc 2.95.3 */
-/* I Molton     29/07/01 */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/hardware.h>
-
-#define RET	movs
-#define RETc(x)	mov##x##s
-#define RETCOND ^
-
-dividend	.req	r0
-divisor		.req	r1
-result		.req	r2
-overdone        .req    r2
-curbit		.req	r3
-ip		.req	r12
-sp		.req	r13
-lr		.req	r14
-pc		.req	r15
-	
-ENTRY(__udivsi3)
-	cmp	divisor, #0
-	beq	Ldiv0
-	mov	curbit, #1
-	mov	result, #0
-	cmp	dividend, divisor
-	bcc	Lgot_result_udivsi3
-1:
-	@ Unless the divisor is very big, shift it up in multiples of
-	@ four bits, since this is the amount of unwinding in the main
-	@ division loop.  Continue shifting until the divisor is 
-	@ larger than the dividend.
-	cmp	divisor, #0x10000000
-	cmpcc	divisor, dividend
-	movcc	divisor, divisor, lsl #4
-	movcc	curbit, curbit, lsl #4
-	bcc	1b
-
-2:
-	@ For very big divisors, we must shift it a bit at a time, or
-	@ we will be in danger of overflowing.
-	cmp	divisor, #0x80000000
-	cmpcc	divisor, dividend
-	movcc	divisor, divisor, lsl #1
-	movcc	curbit, curbit, lsl #1
-	bcc	2b
-
-3:
-	@ Test for possible subtractions, and note which bits
-	@ are done in the result.  On the final pass, this may subtract
-	@ too much from the dividend, but the result will be ok, since the
-	@ "bit" will have been shifted out at the bottom.
-	cmp	dividend, divisor
-	subcs	dividend, dividend, divisor
-	orrcs	result, result, curbit
-	cmp	dividend, divisor, lsr #1
-	subcs	dividend, dividend, divisor, lsr #1
-	orrcs	result, result, curbit, lsr #1
-	cmp	dividend, divisor, lsr #2
-	subcs	dividend, dividend, divisor, lsr #2
-	orrcs	result, result, curbit, lsr #2
-	cmp	dividend, divisor, lsr #3
-	subcs	dividend, dividend, divisor, lsr #3
-	orrcs	result, result, curbit, lsr #3
-	cmp	dividend, #0			@ Early termination?
-	movnes	curbit, curbit, lsr #4		@ No, any more bits to do?
-	movne	divisor, divisor, lsr #4
-	bne	3b
-Lgot_result_udivsi3:
-	mov	r0, result
-	RET	pc, lr
-
-Ldiv0:
-	str	lr, [sp, #-4]!
-	bl	__div0
-	mov	r0, #0			@ about as wrong as it could be
-	ldmia	sp!, {pc}RETCOND
-
-/* __umodsi3 ----------------------- */
-
-ENTRY(__umodsi3)
-	cmp	divisor, #0
-	beq	Ldiv0
-	mov	curbit, #1
-	cmp	dividend, divisor
-	RETc(cc)	pc, lr
-1:
-	@ Unless the divisor is very big, shift it up in multiples of
-	@ four bits, since this is the amount of unwinding in the main
-	@ division loop.  Continue shifting until the divisor is 
-	@ larger than the dividend.
-	cmp	divisor, #0x10000000
-	cmpcc	divisor, dividend
-	movcc	divisor, divisor, lsl #4
-	movcc	curbit, curbit, lsl #4
-	bcc	1b
-
-2:
-	@ For very big divisors, we must shift it a bit at a time, or
-	@ we will be in danger of overflowing.
-	cmp	divisor, #0x80000000
-	cmpcc	divisor, dividend
-	movcc	divisor, divisor, lsl #1
-	movcc	curbit, curbit, lsl #1
-	bcc	2b
-
-3:
-	@ Test for possible subtractions.  On the final pass, this may 
-	@ subtract too much from the dividend, so keep track of which
-	@ subtractions are done, we can fix them up afterwards...
-	mov	overdone, #0
-	cmp	dividend, divisor
-	subcs	dividend, dividend, divisor
-	cmp	dividend, divisor, lsr #1
-	subcs	dividend, dividend, divisor, lsr #1
-	orrcs	overdone, overdone, curbit, ror #1
-	cmp	dividend, divisor, lsr #2
-	subcs	dividend, dividend, divisor, lsr #2
-	orrcs	overdone, overdone, curbit, ror #2
-	cmp	dividend, divisor, lsr #3
-	subcs	dividend, dividend, divisor, lsr #3
-	orrcs	overdone, overdone, curbit, ror #3
-	mov	ip, curbit
-	cmp	dividend, #0			@ Early termination?
-	movnes	curbit, curbit, lsr #4		@ No, any more bits to do?
-	movne	divisor, divisor, lsr #4
-	bne	3b
-
-	@ Any subtractions that we should not have done will be recorded in
-	@ the top three bits of "overdone".  Exactly which were not needed
-	@ are governed by the position of the bit, stored in ip.
-	@ If we terminated early, because dividend became zero,
-	@ then none of the below will match, since the bit in ip will not be
-	@ in the bottom nibble.
-	ands	overdone, overdone, #0xe0000000
-	RETc(eq)	pc, lr				@ No fixups needed
-	tst	overdone, ip, ror #3
-	addne	dividend, dividend, divisor, lsr #3
-	tst	overdone, ip, ror #2
-	addne	dividend, dividend, divisor, lsr #2
-	tst	overdone, ip, ror #1
-	addne	dividend, dividend, divisor, lsr #1
-	RET	pc, lr
-
-ENTRY(__divsi3)
-	eor	ip, dividend, divisor		@ Save the sign of the result.
-	mov	curbit, #1
-	mov	result, #0
-	cmp	divisor, #0
-	rsbmi	divisor, divisor, #0		@ Loops below use unsigned.
-	beq	Ldiv0
-	cmp	dividend, #0
-	rsbmi	dividend, dividend, #0
-	cmp	dividend, divisor
-	bcc	Lgot_result_divsi3
-
-1:
-	@ Unless the divisor is very big, shift it up in multiples of
-	@ four bits, since this is the amount of unwinding in the main
-	@ division loop.  Continue shifting until the divisor is 
-	@ larger than the dividend.
-	cmp	divisor, #0x10000000
-	cmpcc	divisor, dividend
-	movcc	divisor, divisor, lsl #4
-	movcc	curbit, curbit, lsl #4
-	bcc	1b
-
-2:
-	@ For very big divisors, we must shift it a bit at a time, or
-	@ we will be in danger of overflowing.
-	cmp	divisor, #0x80000000
-	cmpcc	divisor, dividend
-	movcc	divisor, divisor, lsl #1
-	movcc	curbit, curbit, lsl #1
-	bcc	2b
-
-3:
-	@ Test for possible subtractions, and note which bits
-	@ are done in the result.  On the final pass, this may subtract
-	@ too much from the dividend, but the result will be ok, since the
-	@ "bit" will have been shifted out at the bottom.
-	cmp	dividend, divisor
-	subcs	dividend, dividend, divisor
-	orrcs	result, result, curbit
-	cmp	dividend, divisor, lsr #1
-	subcs	dividend, dividend, divisor, lsr #1
-	orrcs	result, result, curbit, lsr #1
-	cmp	dividend, divisor, lsr #2
-	subcs	dividend, dividend, divisor, lsr #2
-	orrcs	result, result, curbit, lsr #2
-	cmp	dividend, divisor, lsr #3
-	subcs	dividend, dividend, divisor, lsr #3
-	orrcs	result, result, curbit, lsr #3
-	cmp	dividend, #0			@ Early termination?
-	movnes	curbit, curbit, lsr #4		@ No, any more bits to do?
-	movne	divisor, divisor, lsr #4
-	bne	3b
-Lgot_result_divsi3:
-	mov	r0, result
-	cmp	ip, #0
-	rsbmi	r0, r0, #0
-	RET	pc, lr
-
-ENTRY(__modsi3)
-	mov	curbit, #1
-	cmp	divisor, #0
-	rsbmi	divisor, divisor, #0		@ Loops below use unsigned.
-	beq	Ldiv0
-	@ Need to save the sign of the dividend, unfortunately, we need
-	@ ip later on; this is faster than pushing lr and using that.
-	str	dividend, [sp, #-4]!
-	cmp	dividend, #0
-	rsbmi	dividend, dividend, #0
-	cmp	dividend, divisor
-	bcc	Lgot_result_modsi3
-
-1:
-	@ Unless the divisor is very big, shift it up in multiples of
-	@ four bits, since this is the amount of unwinding in the main
-	@ division loop.  Continue shifting until the divisor is 
-	@ larger than the dividend.
-	cmp	divisor, #0x10000000
-	cmpcc	divisor, dividend
-	movcc	divisor, divisor, lsl #4
-	movcc	curbit, curbit, lsl #4
-	bcc	1b
-
-2:
-	@ For very big divisors, we must shift it a bit at a time, or
-	@ we will be in danger of overflowing.
-	cmp	divisor, #0x80000000
-	cmpcc	divisor, dividend
-	movcc	divisor, divisor, lsl #1
-	movcc	curbit, curbit, lsl #1
-	bcc	2b
-
-3:
-	@ Test for possible subtractions.  On the final pass, this may 
-	@ subtract too much from the dividend, so keep track of which
-	@ subtractions are done, we can fix them up afterwards...
-	mov	overdone, #0
-	cmp	dividend, divisor
-	subcs	dividend, dividend, divisor
-	cmp	dividend, divisor, lsr #1
-	subcs	dividend, dividend, divisor, lsr #1
-	orrcs	overdone, overdone, curbit, ror #1
-	cmp	dividend, divisor, lsr #2
-	subcs	dividend, dividend, divisor, lsr #2
-	orrcs	overdone, overdone, curbit, ror #2
-	cmp	dividend, divisor, lsr #3
-	subcs	dividend, dividend, divisor, lsr #3
-	orrcs	overdone, overdone, curbit, ror #3
-	mov	ip, curbit
-	cmp	dividend, #0			@ Early termination?
-	movnes	curbit, curbit, lsr #4		@ No, any more bits to do?
-	movne	divisor, divisor, lsr #4
-	bne	3b
-
-	@ Any subtractions that we should not have done will be recorded in
-	@ the top three bits of "overdone".  Exactly which were not needed
-	@ are governed by the position of the bit, stored in ip.
-	@ If we terminated early, because dividend became zero,
-	@ then none of the below will match, since the bit in ip will not be
-	@ in the bottom nibble.
-	ands	overdone, overdone, #0xe0000000
-	beq	Lgot_result_modsi3
-	tst	overdone, ip, ror #3
-	addne	dividend, dividend, divisor, lsr #3
-	tst	overdone, ip, ror #2
-	addne	dividend, dividend, divisor, lsr #2
-	tst	overdone, ip, ror #1
-	addne	dividend, dividend, divisor, lsr #1
-Lgot_result_modsi3:
-	ldr	ip, [sp], #4
-	cmp	ip, #0
-	rsbmi	dividend, dividend, #0
-	RET	pc, lr