Remove the arm26 port

The arm26 port has been in a state where it was far from even compiling
for quite some time.

Ian Molton agreed with the removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 221 deletions

diff --git a/arch/arm26/nwfpe/fpa11.c b/arch/arm26/nwfpe/fpa11.c
deleted file mode 100644
index e954540a946..00000000000
--- a/arch/arm26/nwfpe/fpa11.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.COM, 1998,1999
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "fpa11.h"
-#include "fpopcode.h"
-
-#include "fpmodule.h"
-#include "fpmodule.inl"
-
-#include <linux/compiler.h>
-#include <asm/system.h>
-
-/* forward declarations */
-unsigned int EmulateCPDO(const unsigned int);
-unsigned int EmulateCPDT(const unsigned int);
-unsigned int EmulateCPRT(const unsigned int);
-
-/* Reset the FPA11 chip.  Called to initialize and reset the emulator. */
-void resetFPA11(void)
-{
-  int i;
-  FPA11 *fpa11 = GET_FPA11();
-  
-  /* initialize the register type array */
-  for (i=0;i<=7;i++)
-  {
-    fpa11->fType[i] = typeNone;
-  }
-  
-  /* FPSR: set system id to FP_EMULATOR, set AC, clear all other bits */
-  fpa11->fpsr = FP_EMULATOR | BIT_AC;
-  
-  /* FPCR: set SB, AB and DA bits, clear all others */
-#if MAINTAIN_FPCR
-  fpa11->fpcr = MASK_RESET;
-#endif
-}
-
-void SetRoundingMode(const unsigned int opcode)
-{
-#if MAINTAIN_FPCR
-   FPA11 *fpa11 = GET_FPA11();
-   fpa11->fpcr &= ~MASK_ROUNDING_MODE;
-#endif   
-   switch (opcode & MASK_ROUNDING_MODE)
-   {
-      default:
-      case ROUND_TO_NEAREST:
-         float_rounding_mode = float_round_nearest_even;
-#if MAINTAIN_FPCR         
-         fpa11->fpcr |= ROUND_TO_NEAREST;
-#endif         
-      break;
-      
-      case ROUND_TO_PLUS_INFINITY:
-         float_rounding_mode = float_round_up;
-#if MAINTAIN_FPCR         
-         fpa11->fpcr |= ROUND_TO_PLUS_INFINITY;
-#endif         
-      break;
-      
-      case ROUND_TO_MINUS_INFINITY:
-         float_rounding_mode = float_round_down;
-#if MAINTAIN_FPCR         
-         fpa11->fpcr |= ROUND_TO_MINUS_INFINITY;
-#endif         
-      break;
-      
-      case ROUND_TO_ZERO:
-         float_rounding_mode = float_round_to_zero;
-#if MAINTAIN_FPCR         
-         fpa11->fpcr |= ROUND_TO_ZERO;
-#endif         
-      break;
-  }
-}
-
-void SetRoundingPrecision(const unsigned int opcode)
-{
-#if MAINTAIN_FPCR
-   FPA11 *fpa11 = GET_FPA11();
-   fpa11->fpcr &= ~MASK_ROUNDING_PRECISION;
-#endif   
-   switch (opcode & MASK_ROUNDING_PRECISION)
-   {
-      case ROUND_SINGLE:
-         floatx80_rounding_precision = 32;
-#if MAINTAIN_FPCR         
-         fpa11->fpcr |= ROUND_SINGLE;
-#endif         
-      break;
-      
-      case ROUND_DOUBLE:
-         floatx80_rounding_precision = 64;
-#if MAINTAIN_FPCR         
-         fpa11->fpcr |= ROUND_DOUBLE;
-#endif         
-      break;
-      
-      case ROUND_EXTENDED:
-         floatx80_rounding_precision = 80;
-#if MAINTAIN_FPCR         
-         fpa11->fpcr |= ROUND_EXTENDED;
-#endif         
-      break;
-      
-      default: floatx80_rounding_precision = 80;
-  }
-}
-
-void FPA11_CheckInit(void)
-{
-  FPA11 *fpa11 = GET_FPA11();
-  if (unlikely(fpa11->initflag == 0))
-  {
-    resetFPA11();
-    SetRoundingMode(ROUND_TO_NEAREST);
-    SetRoundingPrecision(ROUND_EXTENDED);
-    fpa11->initflag = 1;
-  }
-}
-
-/* Emulate the instruction in the opcode. */
-unsigned int EmulateAll(unsigned int opcode)
-{
-  unsigned int nRc = 1, code;
-
-  code = opcode & 0x00000f00;
-  if (code == 0x00000100 || code == 0x00000200)
-  {
-    /* For coprocessor 1 or 2 (FPA11) */
-    code = opcode & 0x0e000000;
-    if (code == 0x0e000000)
-    {
-      if (opcode & 0x00000010)
-      {
-        /* Emulate conversion opcodes. */
-        /* Emulate register transfer opcodes. */
-        /* Emulate comparison opcodes. */
-        nRc = EmulateCPRT(opcode);
-      }
-      else
-      {
-        /* Emulate monadic arithmetic opcodes. */
-        /* Emulate dyadic arithmetic opcodes. */
-        nRc = EmulateCPDO(opcode);
-      }
-    }
-    else if (code == 0x0c000000)
-    {
-      /* Emulate load/store opcodes. */
-      /* Emulate load/store multiple opcodes. */
-      nRc = EmulateCPDT(opcode);
-    }
-    else
-    {
-      /* Invalid instruction detected.  Return FALSE. */
-      nRc = 0;
-    }
-  }
-
-  return(nRc);
-}
-
-#if 0
-unsigned int EmulateAll1(unsigned int opcode)
-{
-  switch ((opcode >> 24) & 0xf)
-  {
-     case 0xc:
-     case 0xd:
-       if ((opcode >> 20) & 0x1)
-       {
-          switch ((opcode >> 8) & 0xf)
-          {
-             case 0x1: return PerformLDF(opcode); break;
-             case 0x2: return PerformLFM(opcode); break;
-             default: return 0;
-          }
-       }
-       else
-       {
-          switch ((opcode >> 8) & 0xf)
-          {
-             case 0x1: return PerformSTF(opcode); break;
-             case 0x2: return PerformSFM(opcode); break;
-             default: return 0;
-          }
-      }
-     break;
-     
-     case 0xe: 
-       if (opcode & 0x10)
-         return EmulateCPDO(opcode);
-       else
-         return EmulateCPRT(opcode);
-     break;
-  
-     default: return 0;
-  }
-}
-#endif
-