Merge branch 'for_rmk' of git://git.linaro.org/kernel/linux-linaro-next into devel-stable

62 files changed, 495 insertions, 162 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8d395352f1c..ca5aa5aa39e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -271,7 +271,6 @@ config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
-	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
@@ -1062,6 +1061,32 @@ config ARM_ERRATA_460075
 	  ACTLR register. Note that setting specific bits in the ACTLR register
 	  may not be available in non-secure mode.
 
+config ARM_ERRATA_742230
+	bool "ARM errata: DMB operation may be faulty"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 742230 Cortex-A9
+	  (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
+	  between two write operations may not ensure the correct visibility
+	  ordering of the two writes. This workaround sets a specific bit in
+	  the diagnostic register of the Cortex-A9 which causes the DMB
+	  instruction to behave as a DSB, ensuring the correct behaviour of
+	  the two writes.
+
+config ARM_ERRATA_742231
+	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 742231 Cortex-A9
+	  (r2p0..r2p2) erratum. Under certain conditions, specific to the
+	  Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
+	  accessing some data located in the same cache line, may get corrupted
+	  data due to bad handling of the address hazard when the line gets
+	  replaced from one of the CPUs at the same time as another CPU is
+	  accessing it. This workaround sets specific bits in the diagnostic
+	  register of the Cortex-A9 which reduces the linefill issuing
+	  capabilities of the processor.
+
 config PL310_ERRATA_588369
 	bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
 	depends on CACHE_L2X0 && ARCH_OMAP4
@@ -1449,6 +1474,20 @@ config UACCESS_WITH_MEMCPY
 	  However, if the CPU data cache is using a write-allocate mode,
 	  this option is unlikely to provide any performance gain.
 
+config SECCOMP
+	bool
+	prompt "Enable seccomp to safely compute untrusted bytecode"
+	---help---
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
+	  and the task is only allowed to execute a few safe syscalls
+	  defined by each seccomp mode.
+
 config CC_STACKPROTECTOR
 	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
 	help
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 91344af75f3..c29fb382aee 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -2,6 +2,20 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
+config STRICT_DEVMEM
+	bool "Filter access to /dev/mem"
+	depends on MMU
+	---help---
+	  If this option is disabled, you allow userspace (root) access to all
+	  of memory, including kernel and userspace memory. Accidental
+	  access to this is obviously disastrous, but specific access can
+	  be used by people debugging the kernel.
+
+	  If this option is switched on, the /dev/mem file only allows
+	  userspace access to memory mapped peripherals.
+
+          If in doubt, say Y.
+
 # RMK wants arm kernels compiled with frame pointers or stack unwinding.
 # If you know what you are doing and are willing to live without stack
 # traces, you can get a slightly smaller kernel by setting this option to
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4e0b6c8d7ed..502255905c4 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -247,13 +247,14 @@ ifeq ($(FASTFPE),$(wildcard $(FASTFPE)))
 FASTFPE_OBJ	:=$(FASTFPE)/
 endif
 
-# If we have a machine-specific directory, then include it in the build.
-core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
-core-y				+= $(machdirs) $(platdirs)
 core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
 
+# If we have a machine-specific directory, then include it in the build.
+core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
+core-y				+= $(machdirs) $(platdirs)
+
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index b23f6bc46cf..65a7c1c588a 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -116,5 +116,5 @@ CFLAGS_font.o := -Dstatic=
 $(obj)/font.c: $(FONTC)
 	$(call cmd,shipped)
 
-$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
+$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
 	@sed "$(SEDFLAGS)" < $< > $@
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 7974baacafc..1bec96e8519 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -271,6 +271,14 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
 		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
 }
 
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (mask >= PHYS_OFFSET + SZ_64M - 1)
+		return 0;
+
+	return -EIO;
+}
+
 int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	it8152_io.start = IT8152_IO_BASE + 0x12000;
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 5747a8baa41..8bb66bca2e3 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -127,4 +127,8 @@ struct mm_struct;
 extern unsigned long arch_randomize_brk(struct mm_struct *mm);
 #define arch_randomize_brk arch_randomize_brk
 
+extern int vectors_user_mapping(void);
+#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping()
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+
 #endif
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 1261b1f928d..815efa2d4e0 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -294,6 +294,7 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
 #define ARCH_HAS_VALID_PHYS_ADDR_RANGE
 extern int valid_phys_addr_range(unsigned long addr, size_t size);
 extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+extern int devmem_is_allowed(unsigned long pfn);
 #endif
 
 /*
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index a0b3cac0547..71605d9f8e4 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -18,7 +18,6 @@
 #include <asm/cacheflush.h>
 #include <asm/cachetype.h>
 #include <asm/proc-fns.h>
-#include <asm-generic/mm_hooks.h>
 
 void __check_kvm_seq(struct mm_struct *mm);
 
@@ -134,4 +133,32 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 #define deactivate_mm(tsk,mm)	do { } while (0)
 #define activate_mm(prev,next)	switch_mm(prev, next, NULL)
 
+/*
+ * We are inserting a "fake" vma for the user-accessible vector page so
+ * gdb and friends can get to it through ptrace and /proc/<pid>/mem.
+ * But we also want to remove it before the generic code gets to see it
+ * during process exit or the unmapping of it would  cause total havoc.
+ * (the macro is used as remove_vma() is static to mm/mmap.c)
+ */
+#define arch_exit_mmap(mm) \
+do { \
+	struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \
+	if (high_vma) { \
+		BUG_ON(high_vma->vm_next);  /* it should be last */ \
+		if (high_vma->vm_prev) \
+			high_vma->vm_prev->vm_next = NULL; \
+		else \
+			mm->mmap = NULL; \
+		rb_erase(&high_vma->vm_rb, &mm->mm_rb); \
+		mm->mmap_cache = NULL; \
+		mm->map_count--; \
+		remove_vma(high_vma); \
+	} \
+} while (0)
+
+static inline void arch_dup_mmap(struct mm_struct *oldmm,
+				 struct mm_struct *mm)
+{
+}
+
 #endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index ab68cf1ef80..e90b167ea84 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -317,6 +317,10 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
 #define pgprot_dmacoherent(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
 #else
 #define pgprot_dmacoherent(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
diff --git a/arch/arm/include/asm/seccomp.h b/arch/arm/include/asm/seccomp.h
new file mode 100644
index 00000000000..52b156b341f
--- /dev/null
+++ b/arch/arm/include/asm/seccomp.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_ARM_SECCOMP_H
+#define _ASM_ARM_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#endif /* _ASM_ARM_SECCOMP_H */
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 763e29fa853..7b5cc8dae06 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -144,6 +144,7 @@ extern void vfp_flush_hwstate(struct thread_info *);
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
 #define TIF_RESTORE_SIGMASK	20
+#define TIF_SECCOMP		21
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
@@ -153,6 +154,7 @@ extern void vfp_flush_hwstate(struct thread_info *);
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 
 /*
  * Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 1b560825e1c..0385a8207b6 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -48,6 +48,8 @@ work_pending:
 	beq	no_work_pending
 	mov	r0, sp				@ 'regs'
 	mov	r2, why				@ 'syscall'
+	tst	r1, #_TIF_SIGPENDING		@ delivering a signal?
+	movne	why, #0				@ prevent further restarts
 	bl	do_notify_resume
 	b	ret_slow_syscall		@ Check work again
 
@@ -293,7 +295,6 @@ ENTRY(vector_swi)
 
 	get_thread_info tsk
 	adr	tbl, sys_call_table		@ load syscall table pointer
-	ldr	ip, [tsk, #TI_FLAGS]		@ check for syscall tracing
 
 #if defined(CONFIG_OABI_COMPAT)
 	/*
@@ -310,8 +311,20 @@ ENTRY(vector_swi)
 	eor	scno, scno, #__NR_SYSCALL_BASE	@ check OS number
 #endif
 
+	ldr	r10, [tsk, #TI_FLAGS]		@ check for syscall tracing
 	stmdb	sp!, {r4, r5}			@ push fifth and sixth args
-	tst	ip, #_TIF_SYSCALL_TRACE		@ are we tracing syscalls?
+
+#ifdef CONFIG_SECCOMP
+	tst	r10, #_TIF_SECCOMP
+	beq	1f
+	mov	r0, scno
+	bl	__secure_computing	
+	add	r0, sp, #S_R0 + S_OFF		@ pointer to regs
+	ldmia	r0, {r0 - r3}			@ have to reload r0 - r3
+1:
+#endif
+
+	tst	r10, #_TIF_SYSCALL_TRACE		@ are we tracing syscalls?
 	bne	__sys_trace
 
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 401e38be1f7..66ac9c92620 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -458,3 +458,24 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
 	unsigned long range_end = mm->brk + 0x02000000;
 	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
 }
+
+/*
+ * The vectors page is always readable from user space for the
+ * atomic helpers and the signal restart code.  Let's declare a mapping
+ * for it so it is visible through ptrace and /proc/<pid>/mem.
+ */
+
+int vectors_user_mapping(void)
+{
+	struct mm_struct *mm = current->mm;
+	return install_special_mapping(mm, 0xffff0000, PAGE_SIZE,
+				       VM_READ | VM_EXEC |
+				       VM_MAYREAD | VM_MAYEXEC |
+				       VM_ALWAYSDUMP | VM_RESERVED,
+				       NULL);
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL;
+}
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
index 551f68f666b..cff4e0a996c 100644
--- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -11,6 +11,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END		(PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END		0xd0000000
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 5e71ccd5e7d..1276babf84d 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -426,7 +426,7 @@ static struct i2c_gpio_platform_data pdata_i2c0 = {
 	.sda_is_open_drain	= 1,
 	.scl_pin		= AT91_PIN_PA21,
 	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
+	.udelay			= 5,		/* ~100 kHz */
 };
 
 static struct platform_device at91sam9g45_twi0_device = {
@@ -440,7 +440,7 @@ static struct i2c_gpio_platform_data pdata_i2c1 = {
 	.sda_is_open_drain	= 1,
 	.scl_pin		= AT91_PIN_PB11,
 	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
+	.udelay			= 5,		/* ~100 kHz */
 };
 
 static struct platform_device at91sam9g45_twi1_device = {
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
index 35e2ead8395..3db3a09fd39 100644
--- a/arch/arm/mach-bcmring/include/mach/vmalloc.h
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -22,4 +22,4 @@
  * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
  * larger physical memory designs better.
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
+#define VMALLOC_END       0xf0000000
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
index ea6cc7beff2..30b3a287ed8 100644
--- a/arch/arm/mach-clps711x/include/mach/vmalloc.h
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 3d996b659ff..9be261beae7 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -769,8 +769,7 @@ static struct map_desc dm355_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00010000),
 		.length		= SZ_32K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 6b6f4c64370..7781e35daec 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -969,8 +969,7 @@ static struct map_desc dm365_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00010000),
 		.length		= SZ_32K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 40fec315c99..5e5b0a7831f 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -653,8 +653,7 @@ static struct map_desc dm644x_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00008000),
 		.length		= SZ_16K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index e4a3df1872a..26e8a9c7f50 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -737,8 +737,7 @@ static struct map_desc dm646x_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00010000),
 		.length		= SZ_32K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 
diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h
index 3b3e4721ce2..eb4936ff90a 100644
--- a/arch/arm/mach-dove/include/mach/io.h
+++ b/arch/arm/mach-dove/include/mach/io.h
@@ -13,8 +13,8 @@
 
 #define IO_SPACE_LIMIT		0xffffffff
 
-#define __io(a)  ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
-				   DOVE_PCIE0_IO_VIRT_BASE))
-#define __mem_pci(a)		(a)
+#define __io(a)  	((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
+						 DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
index 9b44c19e95e..60bde56fba4 100644
--- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1f000000)
+#define VMALLOC_END       0xdf000000
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
index d0958d860a3..0ffbb7c85e5 100644
--- a/arch/arm/mach-footbridge/include/mach/vmalloc.h
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  */
 
 
-#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
+#define VMALLOC_END       0xf0000000
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
index ff1460d6841..a45915b8875 100644
--- a/arch/arm/mach-h720x/include/mach/vmalloc.h
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -5,6 +5,6 @@
 #ifndef __ARCH_ARM_VMALLOC_H
 #define __ARCH_ARM_VMALLOC_H
 
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
 
 #endif
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
index e87ab0b37bd..e056e7cf564 100644
--- a/arch/arm/mach-integrator/include/mach/vmalloc.h
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 61cd4d64b98..24498a932ba 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -503,6 +503,14 @@ struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
 	return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
 }
 
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (mask >= SZ_64M - 1)
+		return 0;
+
+	return -EIO;
+}
+
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
index f91ca6d4fbe..8138371c406 100644
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -26,6 +26,8 @@
 #define PCIBIOS_MAX_MEM		0x4BFFFFFF
 #endif
 
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
+
 #define pcibios_assign_all_busses()	1
 
 /* Register locations and bits */
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 93fc2ec95e7..6e924b39891 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -38,7 +38,7 @@
 
 #define KIRKWOOD_PCIE1_IO_PHYS_BASE	0xf3000000
 #define KIRKWOOD_PCIE1_IO_VIRT_BASE	0xfef00000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00000000
+#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00100000
 #define KIRKWOOD_PCIE1_IO_SIZE		SZ_1M
 
 #define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 55e7f00836b..513ad3102d7 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -117,7 +117,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp)
 	 * IORESOURCE_IO
 	 */
 	pp->res[0].name = "PCIe 0 I/O Space";
-	pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+	pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
 	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
 	pp->res[0].flags = IORESOURCE_IO;
 
@@ -139,7 +139,7 @@ static void __init pcie1_ioresources_init(struct pcie_port *pp)
 	 * IORESOURCE_IO
 	 */
 	pp->res[0].name = "PCIe 1 I/O Space";
-	pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE;
+	pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
 	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
 	pp->res[0].flags = IORESOURCE_IO;
 
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
index 4f5b0e0ce6c..1a8a25edb1b 100644
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ b/arch/arm/mach-mmp/include/mach/system.h
@@ -9,6 +9,8 @@
 #ifndef __ASM_MACH_SYSTEM_H
 #define __ASM_MACH_SYSTEM_H
 
+#include <mach/cputype.h>
+
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
@@ -16,6 +18,9 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	cpu_reset(0);
+	if (cpu_is_pxa168())
+		cpu_reset(0xffff0000);
+	else
+		cpu_reset(0);
 }
 #endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
index 05f81fd8623..31a32ad062d 100644
--- a/arch/arm/mach-msm/include/mach/vmalloc.h
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -16,7 +16,7 @@
 #ifndef __ASM_ARCH_MSM_VMALLOC_H
 #define __ASM_ARCH_MSM_VMALLOC_H
 
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END	  0xd0000000
 
 #endif
 
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 2d37785e385..eaacb6e9b5d 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -70,6 +70,25 @@ int mx51_revision(void)
 }
 EXPORT_SYMBOL(mx51_revision);
 
+#ifdef CONFIG_NEON
+
+/*
+ * All versions of the silicon before Rev. 3 have broken NEON implementations.
+ * Dependent on link order - so the assumption is that vfp_init is called
+ * before us.
+ */
+static int __init mx51_neon_fixup(void)
+{
+	if (mx51_revision() < MX51_CHIP_REV_3_0 && (elf_hwcap & HWCAP_NEON)) {
+		elf_hwcap &= ~HWCAP_NEON;
+		pr_info("Turning off NEON support, detected broken NEON implementation\n");
+	}
+	return 0;
+}
+
+late_initcall(mx51_neon_fixup);
+#endif
+
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
index 25d5cc676e0..7cca3574308 100644
--- a/arch/arm/mach-netx/include/mach/vmalloc.h
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -16,4 +16,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
index 1b2af14df15..b001f67d695 100644
--- a/arch/arm/mach-omap1/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap1/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	(PAGE_OFFSET + 0x18000000)
+#define VMALLOC_END	0xd8000000
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
index 9ce9b6e8ad2..4da31e997ef 100644
--- a/arch/arm/mach-omap2/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap2/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x38000000)
+#define VMALLOC_END	  0xf8000000
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
index 2ad398378ae..31b65ee07b0 100644
--- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
  * area for the same reason. ;)
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 50d5939a78f..58093d9e07b 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -312,8 +312,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	freqs.cpu = policy->cpu;
 
 	if (freq_debug)
-		pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
-			 "(SDRAM %d Mhz)\n",
+		pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
 			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
 			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
 
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 7f64d24cd56..814f1458a06 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -264,23 +264,35 @@
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
  * == 0x3 for pxa300/pxa310/pxa320
  */
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
 #define __cpu_is_pxa2xx(id)				\
 	({						\
 		unsigned int _id = (id) >> 13 & 0x7;	\
 		_id <= 0x2;				\
 	 })
+#else
+#define __cpu_is_pxa2xx(id)	(0)
+#endif
 
+#ifdef CONFIG_PXA3xx
 #define __cpu_is_pxa3xx(id)				\
 	({						\
 		unsigned int _id = (id) >> 13 & 0x7;	\
 		_id == 0x3;				\
 	 })
+#else
+#define __cpu_is_pxa3xx(id)	(0)
+#endif
 
+#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
 #define __cpu_is_pxa93x(id)				\
 	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
 		_id == 0x683 || _id == 0x693;		\
 	 })
+#else
+#define __cpu_is_pxa93x(id)	(0)
+#endif
 
 #define cpu_is_pxa2xx()					\
 	({						\
@@ -309,7 +321,7 @@ extern unsigned long get_clock_tick_rate(void);
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
 #define pcibios_assign_all_busses()	1
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
 #endif
 
-
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
index 262691fb97d..fdca3be47d9 100644
--- a/arch/arm/mach-pxa/include/mach/io.h
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -6,6 +6,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <mach/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 77ad6d34ab5..405b92a2979 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -469,9 +469,13 @@ static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
 	},
 };
 
+static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
+	.use_pio	= 1,
+};
+
 void __init palm27x_pmic_init(void)
 {
 	i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
-	pxa27x_set_i2c_power_info(NULL);
+	pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
 }
 #endif
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index c9b747cedea..37d6173bbb6 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -240,6 +240,7 @@ static void __init vpac270_onenand_init(void) {}
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 static struct pxamci_platform_data vpac270_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
 	.gpio_card_detect	= GPIO53_VPAC270_SD_DETECT_N,
 	.gpio_card_ro		= GPIO52_VPAC270_SD_READONLY,
 	.detect_delay_ms	= 200,
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
index 9a96fd69e70..3bcd86fadb8 100644
--- a/arch/arm/mach-rpc/include/mach/vmalloc.h
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
+#define VMALLOC_END       0xdc000000
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index a492b982aa0..405e6212891 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -18,10 +18,11 @@
 #include <mach/map.h>
 #include <mach/gpio-bank-c.h>
 #include <mach/spi-clocks.h>
+#include <mach/irqs.h>
 
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
-#include <plat/irqs.h>
+#include <plat/devs.h>
 
 static char *spi_src_clks[] = {
 	[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 5c07d013b23..e130379ba0e 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -30,73 +30,73 @@
 #include <plat/devs.h>
 #include <plat/regs-serial.h>
 
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 
 static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
 	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 0,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 1,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 2,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 3,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 };
 
 /* DM9000AEP 10/100 ethernet controller */
 
 static struct resource real6410_dm9k_resource[] = {
-        [0] = {
-                .start = S3C64XX_PA_XM0CSN1,
-                .end   = S3C64XX_PA_XM0CSN1 + 1,
-                .flags = IORESOURCE_MEM
-        },
-        [1] = {
-                .start = S3C64XX_PA_XM0CSN1 + 4,
-                .end   = S3C64XX_PA_XM0CSN1 + 5,
-                .flags = IORESOURCE_MEM
-        },
-        [2] = {
-                .start = S3C_EINT(7),
-                .end   = S3C_EINT(7),
-                .flags = IORESOURCE_IRQ,
-        }
+	[0] = {
+		.start	= S3C64XX_PA_XM0CSN1,
+		.end	= S3C64XX_PA_XM0CSN1 + 1,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= S3C64XX_PA_XM0CSN1 + 4,
+		.end	= S3C64XX_PA_XM0CSN1 + 5,
+		.flags	= IORESOURCE_MEM
+	},
+	[2] = {
+		.start	= S3C_EINT(7),
+		.end	= S3C_EINT(7),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
+	}
 };
 
 static struct dm9000_plat_data real6410_dm9k_pdata = {
-        .flags          = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
 };
 
 static struct platform_device real6410_device_eth = {
-        .name           = "dm9000",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(real6410_dm9k_resource),
-        .resource       = real6410_dm9k_resource,
-        .dev            = {
-                .platform_data  = &real6410_dm9k_pdata,
-        },
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(real6410_dm9k_resource),
+	.resource	= real6410_dm9k_resource,
+	.dev		= {
+		.platform_data	= &real6410_dm9k_pdata,
+	},
 };
 
 static struct platform_device *real6410_devices[] __initdata = {
@@ -129,12 +129,12 @@ static void __init real6410_machine_init(void)
 	/* set timing for nCS1 suitable for ethernet chip */
 
 	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-			(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-			(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-			(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-			(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
-			(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-			(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
 
 	platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
 }
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index af91fefef2c..cfecd70657c 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -281,6 +281,24 @@ static struct clk init_clocks_disable[] = {
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1<<29),
 	}, {
+		.name		= "fimc",
+		.id		= 0,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 24),
+	}, {
+		.name		= "fimc",
+		.id		= 1,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "fimc",
+		.id		= 2,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 26),
+	}, {
 		.name		= "otg",
 		.id		= -1,
 		.parent		= &clk_hclk_psys.clk,
@@ -357,7 +375,7 @@ static struct clk init_clocks_disable[] = {
 		.id		= 1,
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<8),
+		.ctrlbit	= (1 << 10),
 	}, {
 		.name		= "i2c",
 		.id		= 2,
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index b9f4d677cf5..77f456c91ad 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -47,7 +47,7 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
 		.pfn		= __phys_to_pfn(S5PV210_PA_SYSTIMER),
-		.length		= SZ_1M,
+		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)VA_VIC2,
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
index f6c6837c545..8e845b6a7cb 100644
--- a/arch/arm/mach-shark/include/mach/vmalloc.h
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
 /*
  * arch/arm/mach-shark/include/mach/vmalloc.h
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
index 7b1fc984abb..d5a71abcbae 100644
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -273,6 +273,9 @@ extern void gpio_pullup(unsigned gpio, int value);
 extern int gpio_get_value(unsigned gpio);
 extern void gpio_set_value(unsigned gpio, int value);
 
+#define gpio_get_value_cansleep gpio_get_value
+#define gpio_set_value_cansleep gpio_set_value
+
 /* wrappers to sleep-enable the previous two functions */
 static inline unsigned gpio_to_irq(unsigned gpio)
 {
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
index 427e3612db5..ebd8a2543d3 100644
--- a/arch/arm/mach-versatile/include/mach/vmalloc.h
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -18,4 +18,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
+#define VMALLOC_END		0xd8000000
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 577df6cccb0..efb127022d4 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -227,7 +227,13 @@ static void ct_ca9x4_init(void)
 	int i;
 
 #ifdef CONFIG_CACHE_L2X0
-	l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff);
+	void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC);
+
+	/* set RAM latencies to 1 cycle for this core tile. */
+	writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+	writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+	l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
 #endif
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index d073b64ae87..724ba3bce72 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -885,8 +885,23 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	if (ai_usermode & UM_SIGNAL)
 		force_sig(SIGBUS, current);
-	else
-		set_cr(cr_no_alignment);
+	else {
+		/*
+		 * We're about to disable the alignment trap and return to
+		 * user space.  But if an interrupt occurs before actually
+		 * reaching user space, then the IRQ vector entry code will
+		 * notice that we were still in kernel space and therefore
+		 * the alignment trap won't be re-enabled in that case as it
+		 * is presumed to be always on from kernel space.
+		 * Let's prevent that race by disabling interrupts here (they
+		 * are disabled on the way back to user space anyway in
+		 * entry-common.S) and disable the alignment trap only if
+		 * there is no work pending for this thread.
+		 */
+		raw_local_irq_disable();
+		if (!(current_thread_info()->flags & _TIF_WORK_MASK))
+			set_cr(cr_no_alignment);
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 4f5b39687df..b0a98305055 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -144,3 +144,25 @@ int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
 {
 	return !(pfn + (size >> PAGE_SHIFT) > 0x00100000);
 }
+
+#ifdef CONFIG_STRICT_DEVMEM
+
+#include <linux/ioport.h>
+
+/*
+ * devmem_is_allowed() checks to see if /dev/mem access to a certain
+ * address is valid. The argument is a physical page number.
+ * We mimic x86 here by disallowing access to system RAM as well as
+ * device-exclusive MMIO regions. This effectively disable read()/write()
+ * on /dev/mem.
+ */
+int devmem_is_allowed(unsigned long pfn)
+{
+	if (iomem_is_exclusive(pfn << PAGE_SHIFT))
+		return 0;
+	if (!page_is_ram(pfn))
+		return 1;
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 6e1c4f6a2b3..6a3a2d0cd6d 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -15,6 +15,7 @@
 #include <linux/nodemask.h>
 #include <linux/memblock.h>
 #include <linux/sort.h>
+#include <linux/fs.h>
 
 #include <asm/cputype.h>
 #include <asm/sections.h>
@@ -246,6 +247,9 @@ static struct mem_type mem_types[] = {
 		.domain    = DOMAIN_USER,
 	},
 	[MT_MEMORY] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_USER | L_PTE_EXEC,
+		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
@@ -254,6 +258,9 @@ static struct mem_type mem_types[] = {
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_MEMORY_NONCACHED] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
+		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
@@ -411,9 +418,12 @@ static void __init build_mem_type_table(void)
 	 * Enable CPU-specific coherency if supported.
 	 * (Only available on XSC3 at the moment.)
 	 */
-	if (arch_is_coherent() && cpu_is_xsc3())
+	if (arch_is_coherent() && cpu_is_xsc3()) {
 		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-
+		mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
+		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
+		mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
+	}
 	/*
 	 * ARMv6 and above have extended page tables.
 	 */
@@ -438,7 +448,9 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
 		mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
 		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+		mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
 		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
+		mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
 #endif
 	}
 
@@ -475,6 +487,8 @@ static void __init build_mem_type_table(void)
 	mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
+	mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
+	mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
 	mem_types[MT_ROM].prot_sect |= cp->pmd;
 
 	switch (cp->pmd) {
@@ -498,6 +512,19 @@ static void __init build_mem_type_table(void)
 	}
 }
 
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+			      unsigned long size, pgprot_t vma_prot)
+{
+	if (!pfn_valid(pfn))
+		return pgprot_noncached(vma_prot);
+	else if (file->f_flags & O_SYNC)
+		return pgprot_writecombine(vma_prot);
+	return vma_prot;
+}
+EXPORT_SYMBOL(phys_mem_access_prot);
+#endif
+
 #define vectors_base()	(vectors_high() ? 0xffff0000 : 0)
 
 static void __init *early_alloc(unsigned long sz)
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 6a8506d99ee..7563ff0141b 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -186,13 +186,14 @@ cpu_v7_name:
  *	It is assumed that:
  *	- cache type register is implemented
  */
-__v7_setup:
+__v7_ca9mp_setup:
 #ifdef CONFIG_SMP
 	mrc	p15, 0, r0, c1, c0, 1
 	tst	r0, #(1 << 6)			@ SMP/nAMP mode enabled?
 	orreq	r0, r0, #(1 << 6) | (1 << 0)	@ Enable SMP/nAMP mode and
 	mcreq	p15, 0, r0, c1, c0, 1		@ TLB ops broadcasting
 #endif
+__v7_setup:
 	adr	r12, __v7_setup_stack		@ the local stack
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
 	bl	v7_flush_dcache_all
@@ -201,11 +202,16 @@ __v7_setup:
 	mrc	p15, 0, r0, c0, c0, 0		@ read main ID register
 	and	r10, r0, #0xff000000		@ ARM?
 	teq	r10, #0x41000000
-	bne	2f
+	bne	3f
 	and	r5, r0, #0x00f00000		@ variant
 	and	r6, r0, #0x0000000f		@ revision
-	orr	r0, r6, r5, lsr #20-4		@ combine variant and revision
+	orr	r6, r6, r5, lsr #20-4		@ combine variant and revision
+	ubfx	r0, r0, #4, #12			@ primary part number
 
+	/* Cortex-A8 Errata */
+	ldr	r10, =0x00000c08		@ Cortex-A8 primary part number
+	teq	r0, r10
+	bne	2f
 #ifdef CONFIG_ARM_ERRATA_430973
 	teq	r5, #0x00100000			@ only present in r1p*
 	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
@@ -213,21 +219,42 @@ __v7_setup:
 	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_458693
-	teq	r0, #0x20			@ only present in r2p0
+	teq	r6, #0x20			@ only present in r2p0
 	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
 	orreq	r10, r10, #(1 << 5)		@ set L1NEON to 1
 	orreq	r10, r10, #(1 << 9)		@ set PLDNOP to 1
 	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_460075
-	teq	r0, #0x20			@ only present in r2p0
+	teq	r6, #0x20			@ only present in r2p0
 	mrceq	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
 	tsteq	r10, #1 << 22
 	orreq	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
 	mcreq	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
 #endif
+	b	3f
+
+	/* Cortex-A9 Errata */
+2:	ldr	r10, =0x00000c09		@ Cortex-A9 primary part number
+	teq	r0, r10
+	bne	3f
+#ifdef CONFIG_ARM_ERRATA_742230
+	cmp	r6, #0x22			@ only present up to r2p2
+	mrcle	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orrle	r10, r10, #1 << 4		@ set bit #4
+	mcrle	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
+#ifdef CONFIG_ARM_ERRATA_742231
+	teq	r6, #0x20			@ present in r2p0
+	teqne	r6, #0x21			@ present in r2p1
+	teqne	r6, #0x22			@ present in r2p2
+	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orreq	r10, r10, #1 << 12		@ set bit #12
+	orreq	r10, r10, #1 << 22		@ set bit #22
+	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
 
-2:	mov	r10, #0
+3:	mov	r10, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
 #endif
@@ -323,6 +350,29 @@ cpu_elf_name:
 
 	.section ".proc.info.init", #alloc, #execinstr
 
+	.type   __v7_ca9mp_proc_info, #object
+__v7_ca9mp_proc_info:
+	.long	0x410fc090		@ Required ID value
+	.long	0xff0ffff0		@ Mask for ID
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_XN | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__v7_ca9mp_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_v7_name
+	.long	v7_processor_functions
+	.long	v7wbi_tlb_fns
+	.long	v6_user_fns
+	.long	v7_cache_fns
+	.size	__v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+
 	/*
 	 * Match any ARMv7 processor core.
 	 */
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index ea3ca86c528..aedf9c1d645 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/mach-nomadik/timer.c
+ *  linux/arch/arm/plat-nomadik/timer.c
  *
  * Copyright (C) 2008 STMicroelectronics
  * Copyright (C) 2010 Alessandro Rubini
@@ -75,7 +75,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
 		cr = readl(mtu_base + MTU_CR(1));
 		writel(0, mtu_base + MTU_LR(1));
 		writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
-		writel(0x2, mtu_base + MTU_IMSC);
+		writel(1 << 1, mtu_base + MTU_IMSC);
 		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
@@ -131,25 +131,23 @@ void __init nmdk_timer_init(void)
 {
 	unsigned long rate;
 	struct clk *clk0;
-	struct clk *clk1;
-	u32 cr;
+	u32 cr = MTU_CRn_32BITS;
 
 	clk0 = clk_get_sys("mtu0", NULL);
 	BUG_ON(IS_ERR(clk0));
 
-	clk1 = clk_get_sys("mtu1", NULL);
-	BUG_ON(IS_ERR(clk1));
-
 	clk_enable(clk0);
-	clk_enable(clk1);
 
 	/*
-	 * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
-	 * use a divide-by-16 counter if it's more than 16MHz
+	 * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
+	 * for ux500.
+	 * Use a divide-by-16 counter if the tick rate is more than 32MHz.
+	 * At 32 MHz, the timer (with 32 bit counter) can be programmed
+	 * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
+	 * with 16 gives too low timer resolution.
 	 */
-	cr = MTU_CRn_32BITS;;
 	rate = clk_get_rate(clk0);
-	if (rate > 16 << 20) {
+	if (rate > 32000000) {
 		rate /= 16;
 		cr |= MTU_CRn_PRESCALE_16;
 	} else {
@@ -170,15 +168,8 @@ void __init nmdk_timer_init(void)
 		pr_err("timer: failed to initialize clock source %s\n",
 		       nmdk_clksrc.name);
 
-	/* Timer 1 is used for events, fix according to rate */
-	cr = MTU_CRn_32BITS;
-	rate = clk_get_rate(clk1);
-	if (rate > 16 << 20) {
-		rate /= 16;
-		cr |= MTU_CRn_PRESCALE_16;
-	} else {
-		cr |= MTU_CRn_PRESCALE_1;
-	}
+	/* Timer 1 is used for events */
+
 	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
 
 	writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 226b2e858d6..10b3b4c6337 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -220,20 +220,7 @@ void __init omap_map_sram(void)
 	if (omap_sram_size == 0)
 		return;
 
-	if (cpu_is_omap24xx()) {
-		omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
-
-		base = OMAP2_SRAM_PA;
-		base = ROUND_DOWN(base, PAGE_SIZE);
-		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-	}
-
 	if (cpu_is_omap34xx()) {
-		omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA;
-		base = OMAP3_SRAM_PA;
-		base = ROUND_DOWN(base, PAGE_SIZE);
-		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-
 		/*
 		 * SRAM must be marked as non-cached on OMAP3 since the
 		 * CORE DPLL M2 divider change code (in SRAM) runs with the
@@ -244,13 +231,11 @@ void __init omap_map_sram(void)
 		omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
 	}
 
-	if (cpu_is_omap44xx()) {
-		omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
-		base = OMAP4_SRAM_PA;
-		base = ROUND_DOWN(base, PAGE_SIZE);
-		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-	}
-	omap_sram_io_desc[0].length = 1024 * 1024;	/* Use section desc */
+	omap_sram_io_desc[0].virtual = omap_sram_base;
+	base = omap_sram_start;
+	base = ROUND_DOWN(base, PAGE_SIZE);
+	omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+	omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
 	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
 	printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
diff --git a/arch/arm/plat-s5p/dev-fimc0.c b/arch/arm/plat-s5p/dev-fimc0.c
index d3f1a9b5d2b..608770fc153 100644
--- a/arch/arm/plat-s5p/dev-fimc0.c
+++ b/arch/arm/plat-s5p/dev-fimc0.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -18,7 +19,7 @@
 static struct resource s5p_fimc0_resource[] = {
 	[0] = {
 		.start	= S5P_PA_FIMC0,
-		.end	= S5P_PA_FIMC0 + SZ_1M - 1,
+		.end	= S5P_PA_FIMC0 + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -28,9 +29,15 @@ static struct resource s5p_fimc0_resource[] = {
 	},
 };
 
+static u64 s5p_fimc0_dma_mask = DMA_BIT_MASK(32);
+
 struct platform_device s5p_device_fimc0 = {
 	.name		= "s5p-fimc",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(s5p_fimc0_resource),
 	.resource	= s5p_fimc0_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc0_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };
diff --git a/arch/arm/plat-s5p/dev-fimc1.c b/arch/arm/plat-s5p/dev-fimc1.c
index 41bd6986d0a..76e3a97a87d 100644
--- a/arch/arm/plat-s5p/dev-fimc1.c
+++ b/arch/arm/plat-s5p/dev-fimc1.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -18,7 +19,7 @@
 static struct resource s5p_fimc1_resource[] = {
 	[0] = {
 		.start	= S5P_PA_FIMC1,
-		.end	= S5P_PA_FIMC1 + SZ_1M - 1,
+		.end	= S5P_PA_FIMC1 + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -28,9 +29,15 @@ static struct resource s5p_fimc1_resource[] = {
 	},
 };
 
+static u64 s5p_fimc1_dma_mask = DMA_BIT_MASK(32);
+
 struct platform_device s5p_device_fimc1 = {
 	.name		= "s5p-fimc",
 	.id		= 1,
 	.num_resources	= ARRAY_SIZE(s5p_fimc1_resource),
 	.resource	= s5p_fimc1_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc1_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };
diff --git a/arch/arm/plat-s5p/dev-fimc2.c b/arch/arm/plat-s5p/dev-fimc2.c
index dfddeda6d4a..24d29816fa2 100644
--- a/arch/arm/plat-s5p/dev-fimc2.c
+++ b/arch/arm/plat-s5p/dev-fimc2.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -18,7 +19,7 @@
 static struct resource s5p_fimc2_resource[] = {
 	[0] = {
 		.start	= S5P_PA_FIMC2,
-		.end	= S5P_PA_FIMC2 + SZ_1M - 1,
+		.end	= S5P_PA_FIMC2 + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -28,9 +29,15 @@ static struct resource s5p_fimc2_resource[] = {
 	},
 };
 
+static u64 s5p_fimc2_dma_mask = DMA_BIT_MASK(32);
+
 struct platform_device s5p_device_fimc2 = {
 	.name		= "s5p-fimc",
 	.id		= 2,
 	.num_resources	= ARRAY_SIZE(s5p_fimc2_resource),
 	.resource	= s5p_fimc2_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc2_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index 57b68a50f45..e3d41eaed1f 100644
--- a/arch/arm/plat-samsung/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -273,13 +273,13 @@ s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
 	if (!chip)
 		return -EINVAL;
 
-	off = chip->chip.base - pin;
+	off = pin - chip->chip.base;
 	shift = off * 2;
 	reg = chip->base + 0x0C;
 
 	drvstr = __raw_readl(reg);
-	drvstr = 0xffff & (0x3 << shift);
 	drvstr = drvstr >> shift;
+	drvstr &= 0x3;
 
 	return (__force s5p_gpio_drvstr_t)drvstr;
 }
@@ -296,11 +296,12 @@ int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
 	if (!chip)
 		return -EINVAL;
 
-	off = chip->chip.base - pin;
+	off = pin - chip->chip.base;
 	shift = off * 2;
 	reg = chip->base + 0x0C;
 
 	tmp = __raw_readl(reg);
+	tmp &= ~(0x3 << shift);
 	tmp |= drvstr << shift;
 
 	__raw_writel(tmp, reg);
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index db4112c6f2b..1c6b92947c5 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -143,12 +143,12 @@ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
 /* Define values for the drvstr available for each gpio pin.
  *
  * These values control the value of the output signal driver strength,
- * configurable on most pins on the S5C series.
+ * configurable on most pins on the S5P series.
  */
-#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x00)
-#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x01)
-#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x10)
-#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x11)
+#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x0)
+#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x2)
+#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x1)
+#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x3)
 
 /**
  * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin