Merge branch 'ioat' into dmaengine

author: Dan Williams <dan.j.williams@intel.com> 2010-05-17 16:30:58 -0700
committer: Dan Williams <dan.j.williams@intel.com> 2010-05-17 16:30:58 -0700
commit: 0b28330e39bbe0ffee4c56b09fc415fcec595ea3 (patch)
tree: fcf504879883763557e696eff81427b1ab78f76b /arch/arm
parent: 058276303dbc4ed089c1f7dad0871810b1f5ddf1 (diff)
parent: caa20d974c86af496b419eef70010e63b7fab7ac (diff)
143 files changed, 721 insertions, 196 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 0f23009170a..6ab6b337a91 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -172,7 +172,7 @@ not_angel:
 		adr	r0, LC0
  ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
  THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip}	)
- THUMB(		ldr	sp, [r0, #28]				)
+ THUMB(		ldr	sp, [r0, #32]				)
 		subs	r0, r0, r1		@ calculate the delta offset
 
 						@ if delta is zero, we are
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 6416d5b5020..dba4c1da63e 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -18,6 +18,7 @@
 #include <linux/string.h>
 #include <linux/mutex.h>
 #include <linux/clk.h>
+#include <linux/slab.h>
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index ee1d3b85eb6..7974baacafc 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -21,7 +21,6 @@
 #include <linux/ptrace.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/irq.h>
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 90ae00b631c..9dff07c80dd 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -290,7 +290,7 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state)
 	save->LCM_GPO     = locomo_readl(lchip->base + LOCOMO_GPO);	/* GPIO */
 	locomo_writel(0x00, lchip->base + LOCOMO_GPO);
 	save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT);	/* SPI */
-	locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
+	locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
 	save->LCM_GPE     = locomo_readl(lchip->base + LOCOMO_GPE);	/* GPIO */
 	locomo_writel(0x00, lchip->base + LOCOMO_GPE);
 	save->LCM_ASD     = locomo_readl(lchip->base + LOCOMO_ASD);	/* ADSTART */
@@ -418,7 +418,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 	/* Longtime timer */
 	locomo_writel(0, lchip->base + LOCOMO_LTINT);
 	/* SPI */
-	locomo_writel(0, lchip->base + LOCOMO_SPIIE);
+	locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE);
 
 	locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD);
 	r = locomo_readl(lchip->base + LOCOMO_ASD);
@@ -707,7 +707,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
 	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
 		printk(KERN_WARNING "locomo: m62332_senddata Error 1\n");
-		return;
+		goto out;
 	}
 
 	/* Send Sub address (LSB is channel select) */
@@ -735,7 +735,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
 	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
 		printk(KERN_WARNING "locomo: m62332_senddata Error 2\n");
-		return;
+		goto out;
 	}
 
 	/* Send DAC data */
@@ -760,9 +760,9 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
 	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
 		printk(KERN_WARNING "locomo: m62332_senddata Error 3\n");
-		return;
 	}
 
+out:
 	/* stop */
 	r = locomo_readl(mapbase + LOCOMO_DAC);
 	r &=  ~(LOCOMO_DAC_SCLOEB);
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 72da7e045c6..0d08d4170b6 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -15,6 +15,7 @@
 #include <asm/glue.h>
 #include <asm/shmparam.h>
 #include <asm/cachetype.h>
+#include <asm/outercache.h>
 
 #define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
 
@@ -219,12 +220,6 @@ struct cpu_cache_fns {
 	void (*dma_flush_range)(const void *, const void *);
 };
 
-struct outer_cache_fns {
-	void (*inv_range)(unsigned long, unsigned long);
-	void (*clean_range)(unsigned long, unsigned long);
-	void (*flush_range)(unsigned long, unsigned long);
-};
-
 /*
  * Select the calling method
  */
@@ -281,37 +276,6 @@ extern void dmac_flush_range(const void *, const void *);
 
 #endif
 
-#ifdef CONFIG_OUTER_CACHE
-
-extern struct outer_cache_fns outer_cache;
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.inv_range)
-		outer_cache.inv_range(start, end);
-}
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.clean_range)
-		outer_cache.clean_range(start, end);
-}
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.flush_range)
-		outer_cache.flush_range(start, end);
-}
-
-#else
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{ }
-
-#endif
-
 /*
  * Copy user data from/to a page which is mapped into a different
  * processes address space.  Really, we want to allow our "user
diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h
index 7a0690da5e6..b56c1389b6f 100644
--- a/arch/arm/include/asm/clkdev.h
+++ b/arch/arm/include/asm/clkdev.h
@@ -13,6 +13,7 @@
 #define __ASM_CLKDEV_H
 
 struct clk;
+struct device;
 
 struct clk_lookup {
 	struct list_head	node;
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 328f14a8b79..237282f7c76 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -17,6 +17,7 @@
 
 #ifndef __ASSEMBLY__
 struct irqaction;
+struct pt_regs;
 extern void migrate_irqs(void);
 
 extern void asm_do_IRQ(unsigned int, struct pt_regs *);
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
new file mode 100644
index 00000000000..25f76bae57a
--- /dev/null
+++ b/arch/arm/include/asm/outercache.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/include/asm/outercache.h
+ *
+ * Copyright (C) 2010 ARM Ltd.
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_OUTERCACHE_H
+#define __ASM_OUTERCACHE_H
+
+struct outer_cache_fns {
+	void (*inv_range)(unsigned long, unsigned long);
+	void (*clean_range)(unsigned long, unsigned long);
+	void (*flush_range)(unsigned long, unsigned long);
+#ifdef CONFIG_OUTER_CACHE_SYNC
+	void (*sync)(void);
+#endif
+};
+
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.inv_range)
+		outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.clean_range)
+		outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.flush_range)
+		outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
+
+#endif
+
+#ifdef CONFIG_OUTER_CACHE_SYNC
+static inline void outer_sync(void)
+{
+	if (outer_cache.sync)
+		outer_cache.sync();
+}
+#else
+static inline void outer_sync(void)
+{ }
+#endif
+
+#endif	/* __ASM_OUTERCACHE_H */
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index ca88e6a8470..4ace45ec3ef 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -60,6 +60,8 @@
 #include <linux/linkage.h>
 #include <linux/irqflags.h>
 
+#include <asm/outercache.h>
+
 #define __exception	__attribute__((section(".exception.text")))
 
 struct thread_info;
@@ -137,10 +139,12 @@ extern unsigned int user_debug;
 #define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
 
-#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
-#define mb()		dmb()
+#ifdef CONFIG_ARCH_HAS_BARRIERS
+#include <mach/barriers.h>
+#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#define mb()		do { dsb(); outer_sync(); } while (0)
 #define rmb()		dmb()
-#define wmb()		dmb()
+#define wmb()		mb()
 #else
 #define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
@@ -152,9 +156,9 @@ extern unsigned int user_debug;
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
 #else
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
+#define smp_mb()	dmb()
+#define smp_rmb()	dmb()
+#define smp_wmb()	dmb()
 #endif
 
 #define read_barrier_depends()		do { } while(0)
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index b7cb45bb91e..3b3d2c80509 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -27,7 +27,6 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/smp.h>
 #include <linux/init.h>
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 60c62c377fa..2ba7deb3072 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/stop_machine.h>
 #include <linux/stringify.h>
 #include <asm/traps.h>
@@ -393,6 +394,14 @@ void __kprobes jprobe_return(void)
 		/*
 		 * Setup an empty pt_regs. Fill SP and PC fields as
 		 * they're needed by longjmp_break_handler.
+		 *
+		 * We allocate some slack between the original SP and start of
+		 * our fabricated regs. To be precise we want to have worst case
+		 * covered which is STMFD with all 16 regs so we allocate 2 *
+		 * sizeof(struct_pt_regs)).
+		 *
+		 * This is to prevent any simulated instruction from writing
+		 * over the regs when they are accessing the stack.
 		 */
 		"sub    sp, %0, %1		\n\t"
 		"ldr    r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
@@ -410,7 +419,7 @@ void __kprobes jprobe_return(void)
 		"ldmia	sp, {r0 - pc}		\n\t"
 		:
 		: "r" (kcb->jprobe_saved_regs.ARM_sp),
-		  "I" (sizeof(struct pt_regs)),
+		  "I" (sizeof(struct pt_regs) * 2),
 		  "J" (offsetof(struct pt_regs, ARM_sp)),
 		  "J" (offsetof(struct pt_regs, ARM_pc)),
 		  "J" (offsetof(struct pt_regs, ARM_cpsr))
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index f28c5e9c51e..c628bdf6c43 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -16,9 +16,9 @@
 #include <linux/mm.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
-#include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/string.h>
+#include <linux/gfp.h>
 
 #include <asm/pgtable.h>
 #include <asm/sections.h>
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index ba2adefa53f..0e12e0acbf2 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 4350f75e578..c23501842b9 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -15,7 +15,6 @@
 #include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
@@ -27,6 +26,7 @@
 #include <linux/file.h>
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
+#include <linux/slab.h>
 
 /* Fork a new task - this creates a new program thread.
  * This is called indirectly via a small wrapper
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 5025c863713..938fc14f962 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -74,7 +74,7 @@ ENTRY(memmove)
 		rsb	ip, ip, #32
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
-6:		nop
+6:		W(nop)
 		W(ldr)	r3, [r1, #-4]!
 		W(ldr)	r4, [r1, #-4]!
 		W(ldr)	r5, [r1, #-4]!
@@ -85,7 +85,7 @@ ENTRY(memmove)
 
 		add	pc, pc, ip
 		nop
-		nop
+		W(nop)
 		W(str)	r3, [r0, #-4]!
 		W(str)	r4, [r0, #-4]!
 		W(str)	r5, [r0, #-4]!
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
index 6b967ffb655..e2d2f2cd0c4 100644
--- a/arch/arm/lib/uaccess_with_memcpy.c
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -16,6 +16,7 @@
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/hardirq.h> /* for in_atomic() */
+#include <linux/gfp.h>
 #include <asm/current.h>
 #include <asm/page.h>
 
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index b5c5fc6ba3a..3ef68330452 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -20,6 +20,7 @@
 #include <linux/timex.h>
 #include <linux/signal.h>
 #include <linux/clk.h>
+#include <linux/gfp.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 987fab3d846..9fcbd6ca009 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -205,13 +205,25 @@ ENTRY(at91_slow_clock)
 	ldr	r3, .saved_pllbr
 	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
 
+	tst	r3, #(AT91_PMC_MUL &  0xff0000)
+	bne	1f
+	tst	r3, #(AT91_PMC_MUL & ~0xff0000)
+	beq	2f
+1:
 	wait_pllblock
+2:
 
 	/* Restore PLLA setting */
 	ldr	r3, .saved_pllar
 	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
 
+	tst	r3, #(AT91_PMC_MUL &  0xff0000)
+	bne	3f
+	tst	r3, #(AT91_PMC_MUL & ~0xff0000)
+	beq	4f
+3:
 	wait_pllalock
+4:
 
 #ifdef SLOWDOWN_MASTER_CLOCK
 	/*
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 7b20fccb9d4..29c0a911df2 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -28,6 +28,7 @@
 #include <linux/interrupt.h>
 #include <linux/irqreturn.h>
 #include <linux/proc_fs.h>
+#include <linux/slab.h>
 
 #include <mach/timer.h>
 
@@ -2220,11 +2221,15 @@ EXPORT_SYMBOL(dma_map_create_descriptor_ring);
 int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
 	      int dirtied	/* non-zero if any of the pages were modified */
     ) {
+
+	int rc = 0;
 	int regionIdx;
 	int segmentIdx;
 	DMA_Region_t *region;
 	DMA_Segment_t *segment;
 
+	down(&memMap->lock);
+
 	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
 		region = &memMap->region[regionIdx];
 
@@ -2238,7 +2243,8 @@ int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
 					printk(KERN_ERR
 					       "%s: vmalloc'd pages are not yet supported\n",
 					       __func__);
-					return -EINVAL;
+					rc = -EINVAL;
+					goto out;
 				}
 
 			case DMA_MEM_TYPE_KMALLOC:
@@ -2275,7 +2281,8 @@ int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
 					printk(KERN_ERR
 					       "%s: Unsupported memory type: %d\n",
 					       __func__, region->memType);
-					return -EINVAL;
+					rc = -EINVAL;
+					goto out;
 				}
 			}
 
@@ -2313,9 +2320,10 @@ int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
 	memMap->numRegionsUsed = 0;
 	memMap->inUse = 0;
 
+out:
 	up(&memMap->lock);
 
-	return 0;
+	return rc;
 }
 
 EXPORT_SYMBOL(dma_unmap);
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index d15beceb632..df4ab210586 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -22,6 +22,7 @@
 #include <linux/leds.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/slab.h>
 #include <linux/mtd/nand.h>
 #include <linux/input.h>
 #include <linux/spi/spi.h>
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 27772e18e45..0d6ee583f65 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -758,7 +758,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 	[IRQ_MMCINT]			= 7,
 	[IRQ_DM365_MMCINT1]		= 7,
 	[IRQ_DM365_PWMINT3]		= 7,
-	[IRQ_DDRINT]			= 4,
 	[IRQ_AEMIFINT]			= 2,
 	[IRQ_DM365_SDIOINT1]		= 2,
 	[IRQ_TINT0_TINT12]		= 7,
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 15dd886df04..53137387aee 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <mach/edma.h>
 
@@ -1266,7 +1267,8 @@ int edma_start(unsigned channel)
 		/* EDMA channel with event association */
 		pr_debug("EDMA: ER%d %08x\n", j,
 			edma_shadow0_read_array(ctlr, SH_ER, j));
-		/* Clear any pending error */
+		/* Clear any pending event or error */
+		edma_write_array(ctlr, EDMA_ECR, j, mask);
 		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 		/* Clear any SER */
 		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index cc9be7fee62..03acfd39042 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -3,7 +3,7 @@
  *
  * Author: Mark A. Greer <mgreer@mvista.com>
  *
- * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under
  * the terms of the GNU General Public License version 2. This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
@@ -13,7 +13,9 @@
 
 #include <video/da8xx-fb.h>
 
+#include <linux/platform_device.h>
 #include <linux/davinci_emac.h>
+
 #include <mach/serial.h>
 #include <mach/edma.h>
 #include <mach/i2c.h>
@@ -144,6 +146,10 @@ extern const short da850_mmcsd0_pins[];
 extern const short da850_nand_pins[];
 extern const short da850_nor_pins[];
 
+#ifdef CONFIG_DAVINCI_MUX
 int da8xx_pinmux_setup(const short pins[]);
+#else
+static inline int da8xx_pinmux_setup(const short pins[]) { return 0; }
+#endif
 
 #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 42d985beece..9e0b106b4f5 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -253,8 +253,6 @@ static void __init timer_init(void)
 			irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
 			setup_irq(irq, &t->irqaction);
 		}
-
-		timer32_config(&timers[i]);
 	}
 }
 
@@ -331,6 +329,7 @@ static void __init davinci_timer_init(void)
 	unsigned int clocksource_id;
 	static char err[] __initdata = KERN_ERR
 		"%s: can't register clocksource!\n";
+	int i;
 
 	clockevent_id = soc_info->timer_info->clockevent_id;
 	clocksource_id = soc_info->timer_info->clocksource_id;
@@ -389,6 +388,9 @@ static void __init davinci_timer_init(void)
 
 	clockevent_davinci.cpumask = cpumask_of(0);
 	clockevents_register_device(&clockevent_davinci);
+
+	for (i=0; i< ARRAY_SIZE(timers); i++)
+		timer32_config(&timers[i]);
 }
 
 struct sys_timer davinci_timer = {
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index cc377ae8c42..cf547ad7ebd 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -25,7 +25,7 @@
 #include <mach/hardware.h>
 
 /*************************************************************************
- * GPIO handling for EP93xx
+ * Interrupt handling for EP93xx on-chip GPIOs
  *************************************************************************/
 static unsigned char gpio_int_unmasked[3];
 static unsigned char gpio_int_enabled[3];
@@ -40,7 +40,7 @@ static const u8 eoi_register_offset[3]		= { 0x98, 0xb4, 0x54 };
 static const u8 int_en_register_offset[3]	= { 0x9c, 0xb8, 0x58 };
 static const u8 int_debounce_register_offset[3]	= { 0xa8, 0xc4, 0x64 };
 
-void ep93xx_gpio_update_int_params(unsigned port)
+static void ep93xx_gpio_update_int_params(unsigned port)
 {
 	BUG_ON(port > 2);
 
@@ -56,7 +56,7 @@ void ep93xx_gpio_update_int_params(unsigned port)
 		EP93XX_GPIO_REG(int_en_register_offset[port]));
 }
 
-void ep93xx_gpio_int_mask(unsigned line)
+static inline void ep93xx_gpio_int_mask(unsigned line)
 {
 	gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
 }
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 7a261482821..bdb3f670680 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/mman.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
index 44d4c2e8207..f77f2025504 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/arch/arm/mach-integrator/cpu.c
@@ -13,7 +13,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/cpufreq.h>
-#include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 0058c937719..41b10725cef 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -21,6 +21,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 66ef86d6d9e..15e6cc5a352 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -13,7 +13,6 @@
 #include <linux/list.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
@@ -21,6 +20,7 @@
 #include <linux/amba/clcd.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
+#include <linux/gfp.h>
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 148d25fc636..ffbd349363a 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -22,7 +22,6 @@
  */
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 4873f26a42e..6d5a90813d3 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/jiffies.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 93370a46b62..10384fc37cb 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -19,7 +19,6 @@
 #include <linux/pci.h>
 #include <linux/pm.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index a7a08dda7f3..d6ac85ff109 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -21,7 +21,6 @@
 #include <linux/pci.h>
 #include <linux/pm.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 0200f80c1e1..c6a0e4ee9d9 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -18,7 +18,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 2a5c637639b..5d99039286e 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -23,7 +23,6 @@
 #include <linux/pci.h>
 #include <linux/pm.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 394e95a30b7..c6ff5523b38 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index a40badf126c..fbf55140939 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index c84dfac1388..1a557e0d055 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -26,7 +26,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 4467c4224d7..55e5c69352a 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -23,7 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 94f68ba9ea5..237b61a85e9 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -23,7 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 30451300751..91fffb9b208 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -23,7 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 4a12327a09a..0369ec4242a 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -23,7 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 60e9fd08ab8..90771cad06f 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -22,7 +22,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h
index 94a3a86cfeb..6ef65d813f1 100644
--- a/arch/arm/mach-ixp23xx/include/mach/memory.h
+++ b/arch/arm/mach-ixp23xx/include/mach/memory.h
@@ -19,7 +19,7 @@
  */
 #define PHYS_OFFSET		(0x00000000)
 
-#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0))
+#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)
 
 #define __phys_to_bus(x)	((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
 #define __bus_to_phys(x)	((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index 59022becb13..4b0e598a91c 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -23,7 +23,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 6e558a76457..d8bc86d76f1 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -17,7 +17,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 #include <linux/i2c-gpio.h>
 #include <asm/types.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 25bf5ad770e..31a47f6a893 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -14,7 +14,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 59b73a0ddfa..2583b2a1317 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -17,7 +17,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 0bc7185cb6f..c67586b7940 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -27,7 +27,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index bbb76898884..827cbc4402f 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -14,7 +14,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 #include <linux/i2c-gpio.h>
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index e8bb2577816..a17ed79207a 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -20,7 +20,6 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/slab.h>
 #include <mach/npe.h>
 
 #define DEBUG_MSG			0
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 7ea782021d1..4dd74863daa 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -18,7 +18,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 0358f45766c..5e6f711b1c6 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -74,9 +74,9 @@ static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
 		.desc		= "SWR Button",
 		.active_low	= 1,
 	}, {
-		.code		= KEY_F1,
+		.code		= KEY_WPS_BUTTON,
 		.gpio		= 46,
-		.desc		= "WPS Button(F1)",
+		.desc		= "WPS Button",
 		.active_low	= 1,
 	},
 };
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index a604b2a701a..dee1eff50d3 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/mbus.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c
index c472b9e8b37..7fe4fd347c8 100644
--- a/arch/arm/mach-lh7a40x/clcd.c
+++ b/arch/arm/mach-lh7a40x/clcd.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/gfp.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/sysdev.h>
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
index a7dcc530721..85bd8a2d84b 100644
--- a/arch/arm/mach-mmp/include/mach/uncompress.h
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -14,7 +14,7 @@
 #define UART2_BASE	(APB_PHYS_BASE + 0x17000)
 #define UART3_BASE	(APB_PHYS_BASE + 0x18000)
 
-static volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+static volatile unsigned long *UART;
 
 static inline void putc(char c)
 {
@@ -37,6 +37,9 @@ static inline void flush(void)
 
 static inline void arch_decomp_setup(void)
 {
+	/* default to UART2 */
+	UART = (unsigned long *)UART2_BASE;
+
 	if (machine_is_avengers_lite())
 		UART = (unsigned long *)UART3_BASE;
 }
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 3872af1cf2c..170f68e46dd 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -62,6 +62,15 @@ config MACH_MX31_3DS
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+	bool "Make the MXC NAND driver use the in flash Bad Block Table"
+	depends on MACH_MX31_3DS
+	depends on MTD_NAND_MXC
+	help
+	  Enable this if you want that the MXC NAND driver uses the in flash
+	  Bad Block Table to know what blocks are bad instead of scanning the
+	  entire flash looking for bad block markers.
+
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
@@ -95,6 +104,7 @@ config MACH_PCM043
 config MACH_ARMADILLO5X0
 	bool "Support Atmark Armadillo-500 Development Base Board"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Atmark Armadillo-500 platform. This includes
 	  specific configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c
index 80dba9966b5..9a9eb6de612 100644
--- a/arch/arm/mach-mx3/clock-imx31.c
+++ b/arch/arm/mach-mx3/clock-imx31.c
@@ -468,6 +468,7 @@ static struct clk ahb_clk = {
 	}
 
 DEFINE_CLOCK(perclk_clk,  0, NULL,          0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
 
 DEFINE_CLOCK(sdhc1_clk,   0, MXC_CCM_CGR0,  0, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(sdhc2_clk,   1, MXC_CCM_CGR0,  2, NULL, NULL, &perclk_clk);
@@ -490,7 +491,7 @@ DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
 DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
 DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
 DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &serial_pll_clk);
-DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ckil_clk);
 DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(usb_clk2,    0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
@@ -514,7 +515,6 @@ DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk)
 DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
 DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
 
 #define _REGISTER_CLOCK(d, n, c) \
 	{ \
@@ -572,7 +572,6 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
 	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
-	_REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
 };
 
 int __init mx31_clocks_init(unsigned long fref)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 6adb586515e..f8911154a9f 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -575,11 +575,26 @@ struct platform_device imx_ssi_device1 = {
 	.resource = imx_ssi_resources1,
 };
 
-static int mx3_devices_init(void)
+static struct resource imx_wdt_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device imx_wdt_device0 = {
+	.name           = "imx-wdt",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
+	.resource       = imx_wdt_resources,
+};
+
+static int __init mx3_devices_init(void)
 {
 	if (cpu_is_mx31()) {
 		mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
 		mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+		imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
+		imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
 		mxc_register_device(&mxc_rnga_device, NULL);
 	}
 	if (cpu_is_mx35()) {
@@ -597,6 +612,8 @@ static int mx3_devices_init(void)
 		imx_ssi_resources0[1].end = MX35_INT_SSI1;
 		imx_ssi_resources1[1].start = MX35_INT_SSI2;
 		imx_ssi_resources1[1].end = MX35_INT_SSI2;
+		imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
+		imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 42cf175eac6..4f77eb50127 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -25,4 +25,5 @@ extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
-
+extern struct platform_device imx_ssi_device1;
+extern struct platform_device imx_wdt_device0;
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 3d72b0b8970..5f72ec91af2 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -36,6 +36,9 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/i2c.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/delay.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -52,6 +55,8 @@
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 #include "crm_regs.h"
@@ -103,8 +108,158 @@ static int armadillo5x0_pins[] = {
 	/* I2C2 */
 	MX31_PIN_CSPI2_MOSI__SCL,
 	MX31_PIN_CSPI2_MISO__SDA,
+	/* OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+	MX31_PIN_USBOTG_STP__USBOTG_STP,
+	/* USB host 2 */
+	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
 };
 
+/* USB */
+#if defined(CONFIG_USB_ULPI)
+
+#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
+#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
+#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbotg_init(struct platform_device *pdev)
+{
+	int err;
+
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+	/* Chip already enabled by hardware */
+	/* OTG phy reset*/
+	err = gpio_request(OTG_RESET, "USB-OTG-RESET");
+	if (err) {
+		pr_err("Failed to request the usb otg reset gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
+	if (err) {
+		pr_err("Failed to reset the usb otg phy\n");
+		goto otg_free_reset;
+	}
+
+	gpio_set_value(OTG_RESET, 0/*LOW*/);
+	mdelay(5);
+	gpio_set_value(OTG_RESET, 1/*HIGH*/);
+
+	return 0;
+
+otg_free_reset:
+	gpio_free(OTG_RESET);
+	return err;
+}
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int err;
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+
+	/* Enable the chip */
+	err = gpio_request(USBH2_CS, "USB-H2-CS");
+	if (err) {
+		pr_err("Failed to request the usb host 2 CS gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
+	if (err) {
+		pr_err("Failed to drive the usb host 2 CS gpio\n");
+		goto h2_free_cs;
+	}
+
+	/* H2 phy reset*/
+	err = gpio_request(USBH2_RESET, "USB-H2-RESET");
+	if (err) {
+		pr_err("Failed to request the usb host 2 reset gpio\n");
+		goto h2_free_cs;
+	}
+
+	err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
+	if (err) {
+		pr_err("Failed to reset the usb host 2 phy\n");
+		goto h2_free_reset;
+	}
+
+	gpio_set_value(USBH2_RESET, 0/*LOW*/);
+	mdelay(5);
+	gpio_set_value(USBH2_RESET, 1/*HIGH*/);
+
+	return 0;
+
+h2_free_reset:
+	gpio_free(USBH2_RESET);
+h2_free_cs:
+	gpio_free(USBH2_CS);
+	return err;
+}
+
+static struct mxc_usbh_platform_data usbotg_pdata = {
+	.init	= usbotg_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= usbh2_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif /* CONFIG_USB_ULPI */
+
 /* RTC over I2C*/
 #define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
 
@@ -393,6 +548,17 @@ static void __init armadillo5x0_init(void)
 	if (armadillo5x0_i2c_rtc.irq == 0)
 		pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
+
+	/* USB */
+#if defined(CONFIG_USB_ULPI)
+	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_otg_host, &usbotg_pdata);
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
 }
 
 static void __init armadillo5x0_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index b88c18ad769..f54af1e29ca 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -23,6 +23,9 @@
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/machine.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -31,26 +34,96 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31pdk.h>
+#include <mach/board-mx31_3ds.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/mxc_nand.h>
+#include <mach/spi.h>
 #include "devices.h"
 
 /*!
- * @file mx31pdk.c
+ * @file mx31_3ds.c
  *
  * @brief This file contains the board-specific initialization routines.
  *
  * @ingroup System
  */
 
-static int mx31pdk_pins[] = {
+static int mx31_3ds_pins[] = {
 	/* UART1 */
 	MX31_PIN_CTS1__CTS1,
 	MX31_PIN_RTS1__RTS1,
 	MX31_PIN_TXD1__TXD1,
 	MX31_PIN_RXD1__RXD1,
 	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+	/* SPI 1 */
+	MX31_PIN_CSPI2_SCLK__SCLK,
+	MX31_PIN_CSPI2_MOSI__MOSI,
+	MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0,
+	MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
+	/* MC13783 IRQ */
+	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
+};
+
+/* Regulators */
+static struct regulator_init_data pwgtx_init = {
+	.constraints = {
+		.boot_on	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
+	{
+		.id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
+		.init_data = &pwgtx_init,
+	}, {
+		.id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
+		.init_data = &pwgtx_init,
+	},
+};
+
+/* MC13783 */
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.regulators = mx31_3ds_regulators,
+	.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
+	.flags  = MC13783_USE_REGULATOR,
+};
+
+/* SPI */
+static int spi1_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect	= spi1_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi1_internal_chipselect),
+};
+
+static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
+	{
+		.modalias	= "mc13783",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 1,
+		.chip_select	= 1, /* SS2 */
+		.platform_data	= &mc13783_pdata,
+		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+		.mode = SPI_CS_HIGH,
+	},
+};
+
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
+	.width		= 1,
+	.hw_ecc		= 1,
+#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
+	.flash_bbt	= 1,
+#endif
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -95,7 +168,7 @@ static struct platform_device smsc911x_device = {
  * LEDs, switches, interrupts for Ethernet.
  */
 
-static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
+static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
 {
 	uint32_t imr_val;
 	uint32_t int_valid;
@@ -163,7 +236,7 @@ static struct irq_chip expio_irq_chip = {
 	.unmask = expio_unmask_irq,
 };
 
-static int __init mx31pdk_init_expio(void)
+static int __init mx31_3ds_init_expio(void)
 {
 	int i;
 	int ret;
@@ -176,7 +249,7 @@ static int __init mx31pdk_init_expio(void)
 		return -ENODEV;
 	}
 
-	pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+	pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n",
 		__raw_readw(CPLD_CODE_VER_REG));
 
 	/*
@@ -201,7 +274,7 @@ static int __init mx31pdk_init_expio(void)
 		set_irq_flags(i, IRQF_VALID);
 	}
 	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
-	set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+	set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler);
 
 	return 0;
 }
@@ -209,7 +282,7 @@ static int __init mx31pdk_init_expio(void)
 /*
  * This structure defines the MX31 memory map.
  */
-static struct map_desc mx31pdk_io_desc[] __initdata = {
+static struct map_desc mx31_3ds_io_desc[] __initdata = {
 	{
 		.virtual = MX31_CS5_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
@@ -221,10 +294,10 @@ static struct map_desc mx31pdk_io_desc[] __initdata = {
 /*
  * Set up static virtual mappings.
  */
-static void __init mx31pdk_map_io(void)
+static void __init mx31_3ds_map_io(void)
 {
 	mx31_map_io();
-	iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
+	iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc));
 }
 
 /*!
@@ -232,35 +305,40 @@ static void __init mx31pdk_map_io(void)
  */
 static void __init mxc_board_init(void)
 {
-	mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
-				      "mx31pdk");
+	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
+				      "mx31_3ds");
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
+
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(mx31_3ds_spi_devs,
+						ARRAY_SIZE(mx31_3ds_spi_devs));
 
-	if (!mx31pdk_init_expio())
+	if (!mx31_3ds_init_expio())
 		platform_device_register(&smsc911x_device);
 }
 
-static void __init mx31pdk_timer_init(void)
+static void __init mx31_3ds_timer_init(void)
 {
 	mx31_clocks_init(26000000);
 }
 
-static struct sys_timer mx31pdk_timer = {
-	.init	= mx31pdk_timer_init,
+static struct sys_timer mx31_3ds_timer = {
+	.init	= mx31_3ds_timer_init,
 };
 
 /*
  * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31PDK data structure.
+ * initialize __mach_desc_MX31_3DS data structure.
  */
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.phys_io	= MX31_AIPS1_BASE_ADDR,
 	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31pdk_map_io,
+	.map_io         = mx31_3ds_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
-	.timer          = &mx31pdk_timer,
+	.timer          = &mx31_3ds_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index a7dc5191bf5..fccb9207b78 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/fsl_devices.h>
+#include <linux/gfp.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 11f53155916..2df1ec55a97 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -35,7 +35,7 @@
 #include <linux/can/platform/sja1000.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
+#include <linux/gfp.h>
 
 #include <media/soc_camera.h>
 
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index ccd874225c3..093c595ca58 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -28,7 +28,6 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 
@@ -206,5 +205,6 @@ void __init mx31lite_db_init(void)
 	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
 	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
 	platform_device_register(&litekit_led_device);
+	mxc_register_device(&imx_wdt_device0, NULL);
 }
 
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 9fbad2eb3a4..11b906ce7ea 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/types.h>
 
 #include <linux/usb/otg.h>
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 3958515d75b..ffb105e14d8 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
+#include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
 
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index be90c03101c..8f85f73b83a 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -757,7 +757,7 @@ DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
 
 /* GPT */
 DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL,  NULL, &ipg_perclk, NULL);
+	NULL,  NULL, &ipg_clk, NULL);
 DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
 	NULL,  NULL, &ipg_clk, NULL);
 
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 41c769f08c4..2d37785e385 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -14,9 +14,62 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <mach/hardware.h>
 #include <asm/io.h>
 
+static int cpu_silicon_rev = -1;
+
+#define SI_REV 0x48
+
+static void query_silicon_parameter(void)
+{
+	void __iomem *rom = ioremap(MX51_IROM_BASE_ADDR, MX51_IROM_SIZE);
+	u32 rev;
+
+	if (!rom) {
+		cpu_silicon_rev = -EINVAL;
+		return;
+	}
+
+	rev = readl(rom + SI_REV);
+	switch (rev) {
+	case 0x1:
+		cpu_silicon_rev = MX51_CHIP_REV_1_0;
+		break;
+	case 0x2:
+		cpu_silicon_rev = MX51_CHIP_REV_1_1;
+		break;
+	case 0x10:
+		cpu_silicon_rev = MX51_CHIP_REV_2_0;
+		break;
+	case 0x20:
+		cpu_silicon_rev = MX51_CHIP_REV_3_0;
+		break;
+	default:
+		cpu_silicon_rev = 0;
+	}
+
+	iounmap(rom);
+}
+
+/*
+ * Returns:
+ *	the silicon revision of the cpu
+ *	-EINVAL - not a mx51
+ */
+int mx51_revision(void)
+{
+	if (!cpu_is_mx51())
+		return -EINVAL;
+
+	if (cpu_silicon_rev == -1)
+		query_silicon_parameter();
+
+	return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx51_revision);
+
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index c21e18be7af..b7677ef80cc 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -35,11 +35,6 @@ static struct map_desc mxc_io_desc[] __initdata = {
 		.length = MX51_DEBUG_SIZE,
 		.type = MT_DEVICE
 	}, {
-		.virtual = MX51_TZIC_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR),
-		.length = MX51_TZIC_SIZE,
-		.type = MT_DEVICE
-	}, {
 		.virtual = MX51_AIPS1_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR),
 		.length = MX51_AIPS1_SIZE,
@@ -54,11 +49,6 @@ static struct map_desc mxc_io_desc[] __initdata = {
 		.pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR),
 		.length = MX51_AIPS2_SIZE,
 		.type = MT_DEVICE
-	}, {
-		.virtual = MX51_NFC_AXI_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR),
-		.length = MX51_NFC_AXI_SIZE,
-		.type = MT_DEVICE
 	},
 };
 
@@ -69,14 +59,6 @@ static struct map_desc mxc_io_desc[] __initdata = {
  */
 void __init mx51_map_io(void)
 {
-	u32 tzic_addr;
-
-	if (mx51_revision() < MX51_CHIP_REV_2_0)
-		tzic_addr = 0x8FFFC000;
-	else
-		tzic_addr = 0xE0003000;
-	mxc_io_desc[2].pfn =  __phys_to_pfn(tzic_addr);
-
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
@@ -85,5 +67,17 @@ void __init mx51_map_io(void)
 
 void __init mx51_init_irq(void)
 {
-	tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
+	unsigned long tzic_addr;
+	void __iomem *tzic_virt;
+
+	if (mx51_revision() < MX51_CHIP_REV_2_0)
+		tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
+	else
+		tzic_addr = MX51_TZIC_BASE_ADDR;
+
+	tzic_virt = ioremap(tzic_addr, SZ_16K);
+	if (!tzic_virt)
+		panic("unable to map TZIC interrupt controller\n");
+
+	tzic_init_irq(tzic_virt);
 }
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index 1d844e228ea..5b84bcd3027 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -23,6 +23,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/err.h>
+#include <linux/gfp.h>
 
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index 181a78ba816..f009b54e8d2 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -21,6 +21,7 @@
 #include <linux/device.h>
 #include <linux/firmware.h>
 #include <linux/mutex.h>
+#include <linux/slab.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c
index 9a09b2791e0..66b1c91ccc7 100644
--- a/arch/arm/mach-nomadik/gpio.c
+++ b/arch/arm/mach-nomadik/gpio.c
@@ -19,6 +19,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/slab.h>
 
 #include <mach/hardware.h>
 #include <mach/gpio.h>
diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c
index 795b15e8982..463e92465fd 100644
--- a/arch/arm/mach-ns9xxx/plat-serial8250.c
+++ b/arch/arm/mach-ns9xxx/plat-serial8250.c
@@ -10,6 +10,7 @@
  */
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/slab.h>
 
 #include <mach/regs-board-a9m9750dev.h>
 #include <mach/board.h>
diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c
index abee8338735..aed1999d24f 100644
--- a/arch/arm/mach-ns9xxx/processor-ns9360.c
+++ b/arch/arm/mach-ns9xxx/processor-ns9360.c
@@ -10,7 +10,6 @@
  */
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/slab.h>
 
 #include <asm/page.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index f9a5cf750b5..e9bdff192f8 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 
 #include <mach/irqs.h>
 #include <plat/dma.h>
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 3b1eac4d539..e60ca4e47bb 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -31,6 +31,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/cpufreq.h>
+#include <linux/slab.h>
 
 #include <plat/clock.h>
 #include <plat/sram.h>
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 6f4b7cc8f4d..4f63dc6859a 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -15,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/stringify.h>
 
 #include <plat/iommu.h>
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index be8fce395a5..2f3cad6f940 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 
 #include <mach/irqs.h>
 #include <plat/dma.h>
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index b4ca84ee0a9..8b3d26935a3 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
 #include <linux/ctype.h>
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index c18f7f2f19b..6cac9817c24 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -25,6 +25,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 
 #include <plat/clock.h>
 #include <plat/board.h>
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index fee2efb172e..ea0000bc535 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index bdf96eb523b..e8706f15a67 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -12,6 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/mbus.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index cb0feca193d..f9f222ebb7e 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -77,7 +77,7 @@ static struct gpio_keys_button wrt350n_v2_buttons[] = {
 		.desc		= "Reset Button",
 		.active_low	= 1,
 	}, {
-		.code		= KEY_WLAN,
+		.code		= KEY_WPS_BUTTON,
 		.gpio		= 2,
 		.desc		= "WPS Button",
 		.active_low	= 1,
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index 425f7188505..7fa4bf2e212 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -22,6 +22,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/gfp.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index 1f0585329be..ee3c29c57ae 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <asm/cacheflush.h>
 
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 38fbd0a0e40..5b6ee46fa7f 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -272,7 +272,6 @@ config MACH_H5000
 config MACH_HIMALAYA
 	bool "HTC Himalaya Support"
 	select CPU_PXA26x
-	select FB_W100
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
@@ -454,6 +453,13 @@ config PXA_SHARPSL
 config SHARPSL_PM
 	bool
 	select APM_EMULATION
+	select SHARPSL_PM_MAX1111
+
+config SHARPSL_PM_MAX1111
+	bool
+	depends on !CORGI_SSP_DEPRECATED
+	select HWMON
+	select SENSORS_MAX1111
 
 config CORGI_SSP_DEPRECATED
 	bool
@@ -547,7 +553,6 @@ config MACH_E740
 	bool "Toshiba e740"
 	default y
 	depends on ARCH_PXA_ESERIES
-	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e740 family PDA.
@@ -556,7 +561,6 @@ config MACH_E750
 	bool "Toshiba e750"
 	default y
 	depends on ARCH_PXA_ESERIES
-	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e750 family PDA.
@@ -573,7 +577,6 @@ config MACH_E800
 	bool "Toshiba e800"
 	default y
 	depends on ARCH_PXA_ESERIES
-	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e800 family PDA.
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 1d9bc118ee3..9347254f8bc 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 149cdd9aee4..27fa329d9a8 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
+#include <linux/slab.h>
 
 #include <mach/pxa3xx-regs.h>
 
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index b2f878bd460..5161dca8ccc 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -559,10 +559,6 @@ static void __init imote2_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	/* SPI chip select directions - all other directions should
-	 * be handled by drivers.*/
-	gpio_direction_output(37, 0);
-
 	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
 
 	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 5ef91d9d17e..759b851ec98 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -16,9 +16,9 @@
 #define BTUART_BASE	(0x40200000)
 #define STUART_BASE	(0x40700000)
 
-static unsigned long uart_base = FFUART_BASE;
-static unsigned int uart_shift = 2;
-static unsigned int uart_is_pxa = 1;
+static unsigned long uart_base;
+static unsigned int uart_shift;
+static unsigned int uart_is_pxa;
 
 static inline unsigned char uart_read(int offset)
 {
@@ -56,6 +56,11 @@ static inline void flush(void)
 
 static inline void arch_decomp_setup(void)
 {
+	/* initialize to default */
+	uart_base = FFUART_BASE;
+	uart_shift = 2;
+	uart_is_pxa = 1;
+
 	if (machine_is_littleton() || machine_is_intelmote2()
 	    || machine_is_csb726() || machine_is_stargate2()
 	    || machine_is_cm_x300() || machine_is_balloon3())
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 843fcca76e2..7a50ed8fce9 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -38,6 +38,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/regulator/max1586.h>
+#include <linux/slab.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 7693355ee63..166c15f6291 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/suspend.h>
 #include <linux/errno.h>
+#include <linux/slab.h>
 
 #include <mach/pm.h>
 
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 3184bdc1452..44bb675e47f 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -37,8 +37,6 @@
 #include <linux/lis3lv02d.h>
 #include <linux/pda_power.h>
 #include <linux/power_supply.h>
-#include <linux/pda_power.h>
-#include <linux/power_supply.h>
 #include <linux/regulator/max8660.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -444,7 +442,7 @@ static struct gpio_keys_button gpio_keys_button[] = {
 		.active_low		= 0,
 		.wakeup			= 0,
 		.debounce_interval	= 5, /* ms */
-		.desc			= "on/off button",
+		.desc			= "on_off button",
 	},
 };
 
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index a98a434f011..2041eb1d90b 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -764,11 +764,6 @@ static void __init stargate2_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	/* spi chip selects */
-	gpio_direction_output(37, 0);
-	gpio_direction_output(24, 0);
-	gpio_direction_output(39, 0);
-
 	platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
 
 	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 1dd13346f97..9e0c5c3988a 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 #include <linux/fs.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/major.h>
 #include <linux/module.h>
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 90bd4ef71b2..f2dbce5f3cd 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -31,6 +31,7 @@
 #include <linux/smsc911x.h>
 #include <linux/ata_platform.h>
 #include <linux/amba/mmci.h>
+#include <linux/gfp.h>
 
 #include <asm/clkdev.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index c47d974d52b..85883b2e0e4 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -9,7 +9,6 @@
  *
  *  DMA functions specific to RiscPC architecture
  */
-#include <linux/slab.h>
 #include <linux/mman.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index b62bdf18dca..33ccf7bf766 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -18,6 +18,7 @@
 #include <linux/dmapool.h>
 #include <linux/sysdev.h>
 #include <linux/errno.h>
+#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/err.h>
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 9b6dee5d16d..9d490c66891 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -18,7 +18,6 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 
 #include <mach/hardware.h>
 #include <mach/jornada720.h>
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 0b505d9f22d..c601a75a333 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -8,7 +8,6 @@
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
-#include <linux/slab.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
index 962f9de454d..5f55012b7c9 100644
--- a/arch/arm/mach-u300/dummyspichip.c
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -15,6 +15,7 @@
 #include <linux/mutex.h>
 #include <linux/spi/spi.h>
 #include <linux/dma-mapping.h>
+#include <linux/slab.h>
 /*
  * WARNING! Do not include this pl022-specific controller header
  * for any generic driver. It is only done in this dummy chip
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 109f5a6e71c..77fbb1e0e52 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -20,6 +20,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
 #include <linux/amba/mmci.h>
+#include <linux/slab.h>
 
 #include "mmc.h"
 #include "padmux.h"
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 9ddb49b1cb7..3b1a4ee0181 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -32,6 +32,7 @@
 #include <linux/clockchips.h>
 #include <linux/cnt32_to_63.h>
 #include <linux/io.h>
+#include <linux/gfp.h>
 
 #include <asm/clkdev.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 7161ba23b58..334f0df4e94 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -16,7 +16,6 @@
  */
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 48876122df9..e2958eb567f 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -18,6 +18,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c4ed9f93f64..5bd7c89a604 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -736,6 +736,12 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 config OUTER_CACHE
 	bool
 
+config OUTER_CACHE_SYNC
+	bool
+	help
+	  The outer cache has a outer_cache_fns.sync function pointer
+	  that can be used to drain the write buffer of the outer cache.
+
 config CACHE_FEROCEON_L2
 	bool "Enable the Feroceon L2 cache controller"
 	depends on ARCH_KIRKWOOD || ARCH_MV78XX0
@@ -757,6 +763,7 @@ config CACHE_L2X0
 		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4
 	default y
 	select OUTER_CACHE
+	select OUTER_CACHE_SYNC
 	help
 	  This option enables the L2x0 PrimeCell.
 
@@ -781,3 +788,9 @@ config ARM_L1_CACHE_SHIFT
 	int
 	default 6 if ARM_L1_CACHE_SHIFT_6
 	default 5
+
+config ARCH_HAS_BARRIERS
+	bool
+	help
+	  This option allows the use of custom mandatory barriers
+	  included via the mach/barriers.h file.
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 07334632d3e..21ad68ba22b 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -93,6 +93,15 @@ static inline void l2x0_flush_line(unsigned long addr)
 }
 #endif
 
+static void l2x0_cache_sync(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&l2x0_lock, flags);
+	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
 static inline void l2x0_inv_all(void)
 {
 	unsigned long flags;
@@ -225,6 +234,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 	outer_cache.inv_range = l2x0_inv_range;
 	outer_cache.clean_range = l2x0_clean_range;
 	outer_cache.flush_range = l2x0_flush_range;
+	outer_cache.sync = l2x0_cache_sync;
 
 	printk(KERN_INFO "L2X0 cache controller enabled\n");
 }
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 0da7eccf774..1351edc0b26 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -11,7 +11,7 @@
  */
 #include <linux/module.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
 #include <linux/errno.h>
 #include <linux/list.h>
 #include <linux/init.h>
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index c9b97e9836a..0d414c28eb2 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -16,6 +16,7 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/pagemap.h>
+#include <linux/gfp.h>
 
 #include <asm/bugs.h>
 #include <asm/cacheflush.h>
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 7829cb5425f..83db12a68d5 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -17,6 +17,7 @@
 #include <linux/initrd.h>
 #include <linux/sort.h>
 #include <linux/highmem.h>
+#include <linux/gfp.h>
 
 #include <asm/mach-types.h>
 #include <asm/sections.h>
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 9d4da6ac28e..4223d086aa1 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -420,6 +420,10 @@ static void __init build_mem_type_table(void)
 		user_pgprot |= L_PTE_SHARED;
 		kern_pgprot |= L_PTE_SHARED;
 		vecs_pgprot |= L_PTE_SHARED;
+		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
+		mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
+		mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
+		mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
 		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
 		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
 #endif
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index 2690146161b..be5f58e153b 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/mm.h>
+#include <linux/gfp.h>
 #include <linux/highmem.h>
 
 #include <asm/pgalloc.h>
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index d983cd6c788..0c2cc5cd4d8 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/debugfs.h>
+#include <linux/slab.h>
 #include <mach/audmux.h>
 #include <mach/hardware.h>
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
index 2bbd6ed17f5..da92933a233 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
+#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
+#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
 
 /* Definitions for components on the Debug board */
 
@@ -56,4 +56,4 @@
 
 #define MXC_MAX_EXP_IO_LINES	16
 
-#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index 771532b6b4a..5aad344d565 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -14,7 +14,7 @@
  * FB100000	70000000	1M	SPBA 0
  * FB000000	73F00000	1M	AIPS 1
  * FB200000	83F00000	1M	AIPS 2
- * FA100000	8FFFC000	16K	TZIC (interrupt controller)
+ *		8FFFC000	16K	TZIC (interrupt controller)
  *         	90000000	256M	CSD0 SDRAM/DDR
  *         	A0000000	256M	CSD1 SDRAM/DDR
  *         	B0000000	128M	CS0 Flash
@@ -23,11 +23,17 @@
  *         	C8000000	64M	CS3 Flash
  *         	CC000000	32M	CS4 SRAM
  *         	CE000000	32M	CS5 SRAM
- * F9000000	CFFF0000	64K	NFC (NAND Flash AXI)
+ *		CFFF0000	64K	NFC (NAND Flash AXI)
  *
  */
 
 /*
+ * IROM
+ */
+#define MX51_IROM_BASE_ADDR		0x0
+#define MX51_IROM_SIZE			SZ_64K
+
+/*
  * IRAM
  */
 #define MX51_IRAM_BASE_ADDR		0x1FFE0000	/* internal ram */
@@ -40,7 +46,6 @@
  * NFC
  */
 #define MX51_NFC_AXI_BASE_ADDR		0xCFFF0000	/* NAND flash AXI */
-#define MX51_NFC_AXI_BASE_ADDR_VIRT	0xF9000000
 #define MX51_NFC_AXI_SIZE		SZ_64K
 
 /*
@@ -49,9 +54,8 @@
 #define MX51_GPU_BASE_ADDR		0x20000000
 #define MX51_GPU2D_BASE_ADDR		0xD0000000
 
-#define MX51_TZIC_BASE_ADDR		0x8FFFC000
-#define MX51_TZIC_BASE_ADDR_VIRT	0xFA100000
-#define MX51_TZIC_SIZE			SZ_16K
+#define MX51_TZIC_BASE_ADDR_TO1		0x8FFFC000
+#define MX51_TZIC_BASE_ADDR		0xE0000000
 
 #define MX51_DEBUG_BASE_ADDR		0x60000000
 #define MX51_DEBUG_BASE_ADDR_VIRT	0xFA200000
@@ -232,12 +236,10 @@
 #define MX51_IO_ADDRESS(x)					\
 	(void __iomem *)					\
 	(MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) :	\
-	MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) :	\
 	MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) :	\
 	MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) :	\
 	MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) :	\
-	MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) :	\
-	MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \
+	MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \
 	0xDEADBEEF)
 
 /*
@@ -246,9 +248,6 @@
 #define MX51_IRAM_IO_ADDRESS(x)  \
 	(((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT)
 
-#define MX51_TZIC_IO_ADDRESS(x)  \
-	(((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT)
-
 #define MX51_DEBUG_IO_ADDRESS(x)  \
 	(((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT)
 
@@ -261,9 +260,6 @@
 #define MX51_AIPS2_IO_ADDRESS(x)  \
 	(((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT)
 
-#define MX51_NFC_AXI_IO_ADDRESS(x) \
-	(((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT)
-
 #define MX51_IS_MEM_DEVICE_NONSHARED(x)		0
 
 /*
@@ -443,12 +439,7 @@
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 
-extern unsigned int system_rev;
-
-static inline unsigned int mx51_revision(void)
-{
-	return system_rev;
-}
+extern int mx51_revision(void);
 #endif
 
 #endif	/*  __ASM_ARCH_MXC_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 52e476a150c..b6d3d0fddc4 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -66,6 +66,7 @@ static inline void flush(void)
 #define MX2X_UART1_BASE_ADDR	0x1000a000
 #define MX3X_UART1_BASE_ADDR	0x43F90000
 #define MX3X_UART2_BASE_ADDR	0x43F94000
+#define MX51_UART1_BASE_ADDR	0x73fbc000
 
 static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 {
@@ -101,6 +102,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_MAGX_ZN5:
 		uart_base = MX3X_UART2_BASE_ADDR;
 		break;
+	case MACH_TYPE_MX51_BABBAGE:
+		uart_base = MX51_UART1_BASE_ADDR;
+		break;
 	default:
 		break;
 	}
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 4ff6dfe0428..c36f2630ed9 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 4a4cd8774aa..95677d17cd1 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 2ab224c8e16..5c6c342c53f 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -29,6 +29,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c
index afd1c27cff7..e6c0d536899 100644
--- a/arch/arm/plat-omap/iommu-debug.c
+++ b/arch/arm/plat-omap/iommu-debug.c
@@ -13,6 +13,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 #include <linux/uaccess.h>
 #include <linux/platform_device.h>
 #include <linux/debugfs.h>
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 905ed832df5..0e137663349 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -13,6 +13,7 @@
 
 #include <linux/err.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/clk.h>
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 936aef1971c..65c6d1ff723 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/device.h>
 #include <linux/scatterlist.h>
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 4229cec5314..08a2df76628 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 
 #include <plat/mailbox.h>
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 52dfcc81511..e1d0440fd4a 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -23,6 +23,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <plat/dma.h>
 #include <plat/mcbsp.h>
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 59043589484..0f519747951 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -79,6 +79,7 @@
 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
index 2975798d411..742350e0f2a 100644
--- a/arch/arm/plat-pxa/dma.c
+++ b/arch/arm/plat-pxa/dma.c
@@ -14,6 +14,7 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index 51dc5c8106c..0732c6c8d51 100644
--- a/arch/arm/plat-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index 2d42efb9f4e..1ecc15bfe9d 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -23,6 +23,7 @@
 #include <linux/sysdev.h>
 #include <linux/kobject.h>
 #include <linux/sysfs.h>
+#include <linux/slab.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 8c6de1c9968..9265f09bfa5 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -20,6 +20,7 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
index 963fb0b4379..b1908e56da1 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -17,6 +17,7 @@
 #include <linux/cpufreq.h>
 #include <linux/seq_file.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <mach/map.h>
 #include <mach/regs-mem.h>
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index 24993dce10b..0b46d3895d6 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -21,6 +21,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/slab.h>
 
 #include <linux/amba/pl093.h>
 
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index 0b5833b9ac5..210030d5cfe 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/list.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/interrupt.h>
diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c
index a90198fc4b0..002a15f313f 100644
--- a/arch/arm/plat-samsung/dev-fb.c
+++ b/arch/arm/plat-samsung/dev-fb.c
@@ -15,6 +15,7 @@
 #include <linux/string.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
+#include <linux/gfp.h>
 
 #include <mach/irqs.h>
 #include <mach/map.h>
diff --git a/arch/arm/plat-samsung/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c
index 4c761529b94..3a601c16f03 100644
--- a/arch/arm/plat-samsung/dev-i2c0.c
+++ b/arch/arm/plat-samsung/dev-i2c0.c
@@ -11,6 +11,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/gfp.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
diff --git a/arch/arm/plat-samsung/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c
index d44f7911050..858ee2a0414 100644
--- a/arch/arm/plat-samsung/dev-i2c1.c
+++ b/arch/arm/plat-samsung/dev-i2c1.c
@@ -11,6 +11,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/gfp.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
diff --git a/arch/arm/plat-samsung/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c
index a52fb6cf618..3a7b8891ba4 100644
--- a/arch/arm/plat-samsung/dev-nand.c
+++ b/arch/arm/plat-samsung/dev-nand.c
@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/gfp.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c
index 88165657fa5..0e0a3bf5c98 100644
--- a/arch/arm/plat-samsung/dev-usb.c
+++ b/arch/arm/plat-samsung/dev-usb.c
@@ -11,6 +11,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/gfp.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c
index 0b5bb774192..e4baf76f374 100644
--- a/arch/arm/plat-samsung/pm-check.c
+++ b/arch/arm/plat-samsung/pm-check.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/crc32.h>
 #include <linux/ioport.h>
+#include <linux/slab.h>
 
 #include <plat/pm.h>
 
diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c
index f2d11390d01..2eeb49fa056 100644
--- a/arch/arm/plat-samsung/pwm.c
+++ b/arch/arm/plat-samsung/pwm.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c
index ef88f25fb87..b4dcf8c0477 100644
--- a/arch/arm/plat-stmp3xxx/dma.c
+++ b/arch/arm/plat-stmp3xxx/dma.c
@@ -15,6 +15,7 @@
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
  */
+#include <linux/gfp.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/dmapool.h>
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 31c2f4c30a9..1536f1784ca 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Feb 20 14:16:15 2010
+# Last update: Sat Mar 20 15:35:41 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2663,7 +2663,7 @@ reb01			MACH_REB01		REB01			2675
 aquila			MACH_AQUILA		AQUILA			2676
 spark_sls_hw2		MACH_SPARK_SLS_HW2	SPARK_SLS_HW2		2677
 sheeva_esata		MACH_ESATA_SHEEVAPLUG	ESATA_SHEEVAPLUG	2678
-surf7x30		MACH_SURF7X30		SURF7X30		2679
+msm7x30_surf		MACH_MSM7X30_SURF	MSM7X30_SURF		2679
 micro2440		MACH_MICRO2440		MICRO2440		2680
 am2440			MACH_AM2440		AM2440			2681
 tq2440			MACH_TQ2440		TQ2440			2682
@@ -2678,3 +2678,74 @@ vc088x			MACH_VC088X		VC088X			2690
 mioa702			MACH_MIOA702		MIOA702			2691
 hpmin			MACH_HPMIN		HPMIN			2692
 ak880xak		MACH_AK880XAK		AK880XAK		2693
+arm926tomap850		MACH_ARM926TOMAP850	ARM926TOMAP850		2694
+lkevm			MACH_LKEVM		LKEVM			2695
+mw6410			MACH_MW6410		MW6410			2696
+terastation_wxl		MACH_TERASTATION_WXL	TERASTATION_WXL		2697
+cpu8000e		MACH_CPU8000E		CPU8000E		2698
+catania			MACH_CATANIA		CATANIA			2699
+tokyo			MACH_TOKYO		TOKYO			2700
+msm7201a_surf		MACH_MSM7201A_SURF	MSM7201A_SURF		2701
+msm7201a_ffa		MACH_MSM7201A_FFA	MSM7201A_FFA		2702
+msm7x25_surf		MACH_MSM7X25_SURF	MSM7X25_SURF		2703
+msm7x25_ffa		MACH_MSM7X25_FFA	MSM7X25_FFA		2704
+msm7x27_surf		MACH_MSM7X27_SURF	MSM7X27_SURF		2705
+msm7x27_ffa		MACH_MSM7X27_FFA	MSM7X27_FFA		2706
+msm7x30_ffa		MACH_MSM7X30_FFA	MSM7X30_FFA		2707
+qsd8x50_surf		MACH_QSD8X50_SURF	QSD8X50_SURF		2708
+qsd8x50_comet		MACH_QSD8X50_COMET	QSD8X50_COMET		2709
+qsd8x50_ffa		MACH_QSD8X50_FFA	QSD8X50_FFA		2710
+qsd8x50a_surf		MACH_QSD8X50A_SURF	QSD8X50A_SURF		2711
+qsd8x50a_ffa		MACH_QSD8X50A_FFA	QSD8X50A_FFA		2712
+adx_xgcp10		MACH_ADX_XGCP10		ADX_XGCP10		2713
+mcgwumts2a		MACH_MCGWUMTS2A		MCGWUMTS2A		2714
+mobikt			MACH_MOBIKT		MOBIKT			2715
+mx53_evk		MACH_MX53_EVK		MX53_EVK		2716
+igep0030		MACH_IGEP0030		IGEP0030		2717
+axell_h40_h50_ctrl	MACH_AXELL_H40_H50_CTRL	AXELL_H40_H50_CTRL	2718
+dtcommod		MACH_DTCOMMOD		DTCOMMOD		2719
+gould			MACH_GOULD		GOULD			2720
+siberia			MACH_SIBERIA		SIBERIA			2721
+sbc3530			MACH_SBC3530		SBC3530			2722
+qarm			MACH_QARM		QARM			2723
+mips			MACH_MIPS		MIPS			2724
+mx27grb			MACH_MX27GRB		MX27GRB			2725
+sbc8100			MACH_SBC8100		SBC8100			2726
+saarb			MACH_SAARB		SAARB			2727
+omap3mini		MACH_OMAP3MINI		OMAP3MINI		2728
+cnmbook7se		MACH_CNMBOOK7SE		CNMBOOK7SE		2729
+catan			MACH_CATAN		CATAN			2730
+harmony			MACH_HARMONY		HARMONY			2731
+tonga			MACH_TONGA		TONGA			2732
+cybook_orizon		MACH_CYBOOK_ORIZON	CYBOOK_ORIZON		2733
+htcrhodiumcdma		MACH_HTCRHODIUMCDMA	HTCRHODIUMCDMA		2734
+epc_g45			MACH_EPC_G45		EPC_G45			2735
+epc_lpc3250		MACH_EPC_LPC3250	EPC_LPC3250		2736
+mxc91341evb		MACH_MXC91341EVB	MXC91341EVB		2737
+rtw1000			MACH_RTW1000		RTW1000			2738
+bobcat			MACH_BOBCAT		BOBCAT			2739
+trizeps6		MACH_TRIZEPS6		TRIZEPS6		2740
+msm7x30_fluid		MACH_MSM7X30_FLUID	MSM7X30_FLUID		2741
+nedap9263		MACH_NEDAP9263		NEDAP9263		2742
+netgear_ms2110		MACH_NETGEAR_MS2110	NETGEAR_MS2110		2743
+bmx			MACH_BMX		BMX			2744
+netstream		MACH_NETSTREAM		NETSTREAM		2745
+vpnext_rcu		MACH_VPNEXT_RCU		VPNEXT_RCU		2746
+vpnext_mpu		MACH_VPNEXT_MPU		VPNEXT_MPU		2747
+bcmring_tablet_v1	MACH_BCMRING_TABLET_V1	BCMRING_TABLET_V1	2748
+sgarm10			MACH_SGARM10		SGARM10			2749
+cm_t3517		MACH_CM_T3517		CM_T3517		2750
+omap3_cps		MACH_OMAP3_CPS		OMAP3_CPS		2751
+axar1500_receiver	MACH_AXAR1500_RECEIVER	AXAR1500_RECEIVER	2752
+wbd222			MACH_WBD222		WBD222			2753
+mt65xx			MACH_MT65XX		MT65XX			2754
+msm8x60_surf		MACH_MSM8X60_SURF	MSM8X60_SURF		2755
+msm8x60_sim		MACH_MSM8X60_SIM	MSM8X60_SIM		2756
+vmc300			MACH_VMC300		VMC300			2757
+tcc8000_sdk		MACH_TCC8000_SDK	TCC8000_SDK		2758
+nanos			MACH_NANOS		NANOS			2759
+stamp9g10		MACH_STAMP9G10		STAMP9G10		2760
+stamp9g45		MACH_STAMP9G45		STAMP9G45		2761
+h6053			MACH_H6053		H6053			2762
+smint01			MACH_SMINT01		SMINT01			2763
+prtlvt2			MACH_PRTLVT2		PRTLVT2			2764
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 7f3f59fcaa2..a420cb94932 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -545,7 +545,7 @@ static int __init vfp_init(void)
 		 */
 		elf_hwcap |= HWCAP_VFP;
 #ifdef CONFIG_VFPv3
-		if (VFP_arch >= 3) {
+		if (VFP_arch >= 2) {
 			elf_hwcap |= HWCAP_VFPv3;
 
 			/*
author	Dan Williams <dan.j.williams@intel.com>	2010-05-17 16:30:58 -0700
committer	Dan Williams <dan.j.williams@intel.com>	2010-05-17 16:30:58 -0700
commit	0b28330e39bbe0ffee4c56b09fc415fcec595ea3 (patch)
tree	fcf504879883763557e696eff81427b1ab78f76b /arch/arm
parent	058276303dbc4ed089c1f7dad0871810b1f5ddf1 (diff)
parent	caa20d974c86af496b419eef70010e63b7fab7ac (diff)