diff options
| author | Andrew Victor <linux@maxim.org.za> | 2008-01-23 09:28:27 +0100 |
|---|---|---|
| committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2008-01-26 15:00:32 +0000 |
| commit | 6d2a8401d27e3eb8b71d09dd67e0e7d0085b5e29 (patch) | |
| tree | 0290f68d89b6724b81b2ccff304bd6e78a8c9c19 /arch/arm | |
| parent | a04ff1af9723607f5901b79c559357e37cee6823 (diff) | |
[ARM] 4759/1: [AT91] Buttons on CSB300
Support for the 3 GPIO-connected buttons on the CSB300 board.
Based on wakeup testing code from David Brownell.
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/mach-at91/board-csb337.c | 61 |
1 files changed, 61 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index d0aa20c9383..51cb3c8cc60 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -25,6 +25,8 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> #include <asm/hardware.h> #include <asm/setup.h> @@ -156,6 +158,63 @@ static struct platform_device csb_flash = { .num_resources = ARRAY_SIZE(csb_flash_resources), }; +/* + * GPIO Buttons (on CSB300) + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button csb300_buttons[] = { + { + .gpio = AT91_PIN_PB29, + .code = BTN_0, + .desc = "sw0", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PB28, + .code = BTN_1, + .desc = "sw1", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PA21, + .code = BTN_2, + .desc = "sw2", + .active_low = 1, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data csb300_button_data = { + .buttons = csb300_buttons, + .nbuttons = ARRAY_SIZE(csb300_buttons), +}; + +static struct platform_device csb300_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &csb300_button_data, + } +}; + +static void __init csb300_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */ + at91_set_deglitch(AT91_PIN_PB29, 1); + at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */ + at91_set_deglitch(AT91_PIN_PB28, 1); + at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */ + at91_set_deglitch(AT91_PIN_PA21, 1); + + platform_device_register(&csb300_button_device); +} +#else +static void __init csb300_add_device_buttons(void) {} +#endif + static void __init csb337_board_init(void) { /* Serial */ @@ -177,6 +236,8 @@ static void __init csb337_board_init(void) at91_add_device_mmc(0, &csb337_mmc_data); /* NOR flash */ platform_device_register(&csb_flash); + /* Switches on CSB300 */ + csb300_add_device_buttons(); } MACHINE_START(CSB337, "Cogent CSB337") |