Merge branch 'exynos/pwm-clocksource' into late/multiplatform

This series from Tomasz Figa restores support for the pwm clocksource
in Exynos, which was broken during the conversion of the platform
to the common clk framework. The clocksource is only used in one
board in the mainline kernel (universal_c210), and this makes it
work for DT based probing as well as restoring the non-DT based
case.

* exynos/pwm-clocksource:
  ARM: dts: exynops4210: really add universal_c210 dts
  ARM: dts: exynos4210: Add basic dts file for universal_c210 board
  ARM: dts: exynos4: Add node for PWM device
  ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos
  clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core
  clocksource: samsung_pwm_timer: Correct programming of clock events
  clocksource: samsung_pwm_timer: Use proper clockevents max_delta
  clocksource: samsung_pwm_timer: Add support for non-DT platforms
  clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct
  clocksource: samsung_pwm_timer: Keep all driver data in a structure
  clocksource: samsung_pwm_timer: Make PWM spinlock global
  clocksource: samsung_pwm_timer: Let platforms select the driver
  Documentation: Add device tree bindings for Samsung PWM timers
  clocksource: add samsung pwm timer driver

Conflicts:
	arch/arm/boot/dts/Makefile
	arch/arm/mach-exynos/common.c
	drivers/clocksource/Kconfig
	drivers/clocksource/Makefile

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

5 files changed, 363 insertions, 17 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d3cd880d70b..2d870f4e4e2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
+	exynos4210-universal_c210.dtb \
 	exynos4412-odroidx.dtb \
 	exynos4412-smdk4412.dtb \
 	exynos4412-origen.dtb \
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 9ac47d51c40..b620e34fbd9 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -316,6 +316,14 @@
 		status = "disabled";
 	};
 
+	pwm@139D0000 {
+		compatible = "samsung,exynos4210-pwm";
+		reg = <0x139D0000 0x1000>;
+		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
new file mode 100644
index 00000000000..345cdb51dcb
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -0,0 +1,352 @@
+/*
+ * Samsung's Exynos4210 based Universal C210 board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Universal C210 board which is based on
+ * Samsung's Exynos4210 rev0 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4210.dtsi"
+
+/ {
+	model = "Samsung Universal C210 based on Exynos4210 rev0";
+	compatible = "samsung,universal_c210", "samsung,exynos4210";
+
+	memory {
+		reg =  <0x40000000 0x10000000
+			0x50000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
+	};
+
+	mct@10050000 {
+		compatible = "none";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	vemmc_reg: voltage-regulator {
+	        compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2_8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe1 3 0>;
+		enable-active-high;
+	};
+
+	sdhci_emmc: sdhci@12510000 {
+		bus-width = <8>;
+		non-removable;
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+		pinctrl-names = "default";
+		vmmc-supply = <&vemmc_reg>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		vol-up-key {
+			gpios = <&gpx2 0 1>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <1>;
+		};
+
+		vol-down-key {
+			gpios = <&gpx2 1 1>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <1>;
+		};
+
+		config-key {
+			gpios = <&gpx2 2 1>;
+			linux,code = <171>;
+			label = "config";
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+
+		camera-key {
+			gpios = <&gpx2 3 1>;
+			linux,code = <212>;
+			label = "camera";
+			debounce-interval = <1>;
+		};
+
+		power-key {
+			gpios = <&gpx2 7 1>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+
+		ok-key {
+			gpios = <&gpx3 5 1>;
+			linux,code = <352>;
+			label = "ok";
+			debounce-interval = <1>;
+		};
+	};
+
+	tsp_reg: voltage-regulator {
+	        compatible = "regulator-fixed";
+		regulator-name = "TSP_2_8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe2 3 0>;
+		enable-active-high;
+	};
+
+	i2c@13890000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c3_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		tsp@4a {
+			/* TBD: Atmel maXtouch touchscreen */
+			reg = <0x4a>;
+		};
+	};
+
+	i2c@138B0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c5_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		vdd_arm_reg: pmic@60 {
+			compatible = "maxim,max8952";
+			reg = <0x60>;
+
+			max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
+			max8952,default-mode = <0>;
+			max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+							<1050000>, <950000>;
+			max8952,sync-freq = <0>;
+			max8952,ramp-speed = <0>;
+
+			regulator-name = "vdd_arm";
+			regulator-min-microvolt = <770000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pmic@66 {
+			compatible = "national,lp3974";
+			reg = <0x66>;
+
+			max8998,pmic-buck1-default-dvs-idx = <0>;
+			max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
+							<&gpx0 6 0>;
+			max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
+							<1100000>, <1000000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
+			max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB+MIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "LDO6";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VLCD+VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB+VDAC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_AF_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "PS_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VHIC_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "CAM_I_HOST_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "CAM_S_ANA_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "VCC_3.0V_LCD";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "VINT_1.1V";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "VG3D_1.1V";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "VMEM_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ap32khz_reg: EN32KHz-AP {
+					regulator-name = "32KHz AP";
+					regulator-always-on;
+				};
+
+				cp32khz_reg: EN32KHz-CP {
+					regulator-name = "32KHz CP";
+				};
+
+				vichg_reg: ENVICHG {
+					regulator-name = "VICHG";
+				};
+
+				safeout1_reg: ESAFEOUT1 {
+					regulator-name = "SAFEOUT1";
+					regulator-always-on;
+				};
+
+				safeout2_reg: ESAFEOUT2 {
+					regulator-name = "SAFEOUT2";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	pwm@139D0000 {
+		compatible = "samsung,s5p6440-pwm";
+		status = "okay";
+	};
+};
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 9208079d5d5..4bc1c49c69f 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -449,13 +449,6 @@ void __init exynos4_init_irq(void)
 	if (!of_have_populated_dt())
 		combiner_init(S5P_VA_COMBINER_BASE, NULL,
 			      max_combiner_nr(), COMBINER_IRQ(0, 0));
-
-	/*
-	 * The parameters of s5p_init_irq() are for VIC init.
-	 * Theses parameters should be NULL and 0 because EXYNOS4
-	 * uses GIC instead of VIC.
-	 */
-	s5p_init_irq(NULL, 0);
 }
 
 void __init exynos5_init_irq(void)
@@ -463,14 +456,6 @@ void __init exynos5_init_irq(void)
 #ifdef CONFIG_OF
 	irqchip_init();
 #endif
-	/*
-	 * The parameters of s5p_init_irq() are for VIC init.
-	 * Theses parameters should be NULL and 0 because EXYNOS4
-	 * uses GIC instead of VIC.
-	 */
-	if (!of_machine_is_compatible("samsung,exynos5440"))
-		s5p_init_irq(NULL, 0);
-
 	gic_arch_extn.irq_set_wake = s3c_irq_wake;
 }
 
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 77dd30af32f..53b2d59ca25 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -105,9 +105,9 @@ config SAMSUNG_IRQ_VIC_TIMER
          Internal configuration to build the VIC timer interrupt code.
 
 config S5P_IRQ
-	def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+	def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
 	help
-	  Support common interrup part for ARCH_S5P and ARCH_EXYNOS SoCs
+	  Support common interrupt part for ARCH_S5P SoCs
 
 config S5P_EXT_INT
 	bool