Merge branch 'mips-next-3.10' of git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next

124 files changed, 650 insertions, 354 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5b714695b01..1cacda426a0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -49,7 +49,6 @@ config ARM
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
-	select HAVE_VIRT_TO_BUS
 	select KTIME_SCALAR
 	select PERF_USE_VMALLOC
 	select RTC_LIB
@@ -556,7 +555,6 @@ config ARCH_IXP4XX
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select ARCH_REQUIRE_GPIOLIB
-	select COMMON_CLK_DOVE
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
@@ -744,6 +742,7 @@ config ARCH_RPC
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select NO_IOPORT
+	select VIRT_TO_BUS
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -879,6 +878,7 @@ config ARCH_SHARK
 	select ISA_DMA
 	select NEED_MACH_MEMORY_H
 	select PCI
+	select VIRT_TO_BUS
 	select ZONE_DMA
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
@@ -1006,12 +1006,12 @@ config ARCH_MULTI_V4_V5
 	bool
 
 config ARCH_MULTI_V6
-	bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+	bool "ARMv6 based platforms (ARM11)"
 	select ARCH_MULTI_V6_V7
 	select CPU_V6
 
 config ARCH_MULTI_V7
-	bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
 	default y
 	select ARCH_MULTI_V6_V7
 	select ARCH_VEXPRESS
@@ -1183,9 +1183,9 @@ config ARM_NR_BANKS
 	default 8
 
 config IWMMXT
-	bool "Enable iWMMXt support"
+	bool "Enable iWMMXt support" if !CPU_PJ4
 	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-	default y if PXA27x || PXA3xx || ARCH_MMP
+	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -1439,6 +1439,16 @@ config ARM_ERRATA_775420
 	 to deadlock. This workaround puts DSB before executing ISB if
 	 an abort may occur on cache maintenance.
 
+config ARM_ERRATA_798181
+	bool "ARM errata: TLBI/DSB failure on Cortex-A15"
+	depends on CPU_V7 && SMP
+	help
+	  On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
+	  adequately shooting down all use of the old entries. This
+	  option enables the Linux kernel workaround for this erratum
+	  which sends an IPI to the CPUs that are running the same ASID
+	  as the one being invalidated.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1462,10 +1472,6 @@ config ISA_DMA
 	bool
 	select ISA_DMA_API
 
-config ARCH_NO_VIRT_TO_BUS
-	def_bool y
-	depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
-
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool
@@ -1657,13 +1663,16 @@ config LOCAL_TIMERS
 	  accounting to be spread across the timer interval, preventing a
 	  "thundering herd" at every timer tick.
 
+# The GPIO number here must be sorted by descending number. In case of
+# a multiplatform kernel, we just want the highest value required by the
+# selected platforms.
 config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 355 if ARCH_U8500
-	default 264 if MACH_H4700
 	default 512 if SOC_OMAP5
+	default 355 if ARCH_U8500
 	default 288 if ARCH_VT8500 || ARCH_SUNXI
+	default 264 if MACH_H4700
 	default 0
 	help
 	  Maximum number of GPIOs in the system.
@@ -1887,8 +1896,9 @@ config XEN_DOM0
 
 config XEN
 	bool "Xen guest support on ARM (EXPERIMENTAL)"
-	depends on ARM && OF
+	depends on ARM && AEABI && OF
 	depends on CPU_V7 && !CPU_V6
+	depends on !GENERIC_ATOMIC64
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index acddddac7ee..9b31f4311ea 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -492,9 +492,10 @@ config DEBUG_IMX_UART_PORT
 						DEBUG_IMX31_UART || \
 						DEBUG_IMX35_UART || \
 						DEBUG_IMX51_UART || \
-						DEBUG_IMX50_IMX53_UART || \
+						DEBUG_IMX53_UART || \
 						DEBUG_IMX6Q_UART
 	default 1
+	depends on ARCH_MXC
 	help
 	  Choose UART port on which kernel low-level debug messages
 	  should be output.
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 71768b8a1ab..84aa2caf07e 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -115,4 +115,4 @@ i:
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
-subdir-	    := bootp compressed
+subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index dd0c57dd9f3..3234875824d 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -54,7 +54,7 @@
 		};
 
 		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins2>;
+			pinctrl-0 = <&sdio_pins3>;
 			pinctrl-names = "default";
 			status = "okay";
 			/*
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index f8e4855bc9a..070bba4f258 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -64,5 +64,13 @@
 			status = "okay";
 			/* No CD or WP GPIOs */
 		};
+
+		usb@d0050000 {
+			status = "okay";
+		};
+
+		usb@d0051000 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 6f1acc75e15..5b708208b60 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -31,7 +31,6 @@
 	mpic: interrupt-controller@d0020000 {
 	      compatible = "marvell,mpic";
 	      #interrupt-cells = <1>;
-	      #address-cells = <1>;
 	      #size-cells = <1>;
 	      interrupt-controller;
 	};
@@ -54,7 +53,7 @@
 				reg = <0xd0012000 0x100>;
 				reg-shift = <2>;
 				interrupts = <41>;
-				reg-io-width = <4>;
+				reg-io-width = <1>;
 				status = "disabled";
 		};
 		serial@d0012100 {
@@ -62,7 +61,7 @@
 				reg = <0xd0012100 0x100>;
 				reg-shift = <2>;
 				interrupts = <42>;
-				reg-io-width = <4>;
+				reg-io-width = <1>;
 				status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 8188d138020..a195debb67d 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -59,6 +59,12 @@
 					     "mpp50", "mpp51", "mpp52";
 			      marvell,function = "sd0";
 			};
+
+			sdio_pins3: sdio-pins3 {
+			      marvell,pins = "mpp48", "mpp49", "mpp50",
+					     "mpp51", "mpp52", "mpp53";
+			      marvell,function = "sd0";
+			};
 	        };
 
 		gpio0: gpio@d0018100 {
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 1443949c165..ca00d8326c8 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -46,7 +46,7 @@
 				reg = <0xd0012200 0x100>;
 				reg-shift = <2>;
 				interrupts = <43>;
-				reg-io-width = <4>;
+				reg-io-width = <1>;
 				status = "disabled";
 		};
 		serial@d0012300 {
@@ -54,7 +54,7 @@
 				reg = <0xd0012300 0x100>;
 				reg-shift = <2>;
 				interrupts = <44>;
-				reg-io-width = <4>;
+				reg-io-width = <1>;
 				status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index aa98e641931..a98c0d50fbb 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -238,8 +238,32 @@
 				nand {
 					pinctrl_nand: nand-0 {
 						atmel,pins =
-							<3 4 0x0 0x1	/* PD5 gpio RDY pin pull_up */
-							 3 5 0x0 0x1>;	/* PD4 gpio enable pin pull_up */
+							<3 0 0x1 0x0	/* PD0 periph A Read Enable */
+							 3 1 0x1 0x0	/* PD1 periph A Write Enable */
+							 3 2 0x1 0x0	/* PD2 periph A Address Latch Enable */
+							 3 3 0x1 0x0	/* PD3 periph A Command Latch Enable */
+							 3 4 0x0 0x1	/* PD4 gpio Chip Enable pin pull_up */
+							 3 5 0x0 0x1	/* PD5 gpio RDY/BUSY pin pull_up */
+							 3 6 0x1 0x0	/* PD6 periph A Data bit 0 */
+							 3 7 0x1 0x0	/* PD7 periph A Data bit 1 */
+							 3 8 0x1 0x0	/* PD8 periph A Data bit 2 */
+							 3 9 0x1 0x0	/* PD9 periph A Data bit 3 */
+							 3 10 0x1 0x0	/* PD10 periph A Data bit 4 */
+							 3 11 0x1 0x0	/* PD11 periph A Data bit 5 */
+							 3 12 0x1 0x0	/* PD12 periph A Data bit 6 */
+							 3 13 0x1 0x0>;	/* PD13 periph A Data bit 7 */
+					};
+
+					pinctrl_nand_16bits: nand_16bits-0 {
+						atmel,pins =
+							<3 14 0x1 0x0	/* PD14 periph A Data bit 8 */
+							 3 15 0x1 0x0	/* PD15 periph A Data bit 9 */
+							 3 16 0x1 0x0	/* PD16 periph A Data bit 10 */
+							 3 17 0x1 0x0	/* PD17 periph A Data bit 11 */
+							 3 18 0x1 0x0	/* PD18 periph A Data bit 12 */
+							 3 19 0x1 0x0	/* PD19 periph A Data bit 13 */
+							 3 20 0x1 0x0	/* PD20 periph A Data bit 14 */
+							 3 21 0x1 0x0>;	/* PD21 periph A Data bit 15 */
 					};
 				};
 
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 4bf2a8774aa..7e0481e2441 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -105,7 +105,7 @@
 			compatible = "fixed-clock";
 			reg = <1>;
 			#clock-cells = <0>;
-			clock-frequency = <150000000>;
+			clock-frequency = <250000000>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 69140ba99f4..aaa63d0a809 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -191,8 +191,8 @@
 
 		prcmu: prcmu@80157000 {
 			compatible = "stericsson,db8500-prcmu";
-			reg = <0x80157000 0x1000>;
-			reg-names = "prcmu";
+			reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
 			interrupts = <0 47 0x4>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -319,9 +319,8 @@
 				};
 			};
 
-			ab8500@5 {
+			ab8500 {
 				compatible = "stericsson,ab8500";
-				reg = <5>; /* mailbox 5 is i2c */
 				interrupt-parent = <&intc>;
 				interrupts = <0 40 0x4>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 67dbe20868a..f7509cafc37 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -197,6 +197,11 @@
 			status = "disabled";
 		};
 
+		rtc@d8500 {
+			compatible = "marvell,orion-rtc";
+			reg = <0xd8500 0x20>;
+		};
+
 		crypto: crypto@30000 {
 			compatible = "marvell,orion-crypto";
 			reg = <0x30000 0x10000>,
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index e1347fceb5b..1a62bcf18aa 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -275,18 +275,27 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <0 35 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		pdma1: pdma@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <0 36 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		mdma1: mdma@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <0 34 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 5f3562ad674..9a99755920c 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -142,12 +142,18 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x120000 0x1000>;
 			interrupts = <0 34 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		pdma1: pdma@121B0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121000 0x1000>;
 			interrupts = <0 35 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
index 592fb9dc35b..379128eb9d9 100644
--- a/arch/arm/boot/dts/href.dtsi
+++ b/arch/arm/boot/dts/href.dtsi
@@ -221,7 +221,7 @@
 				};
 			};
 
-			ab8500@5 {
+			ab8500 {
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index 55f4191a626..2b587a74b81 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -158,7 +158,7 @@
 				};
 			};
 
-			ab8500@5 {
+			ab8500 {
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 6ce3d17c3a2..fd36e1cca10 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -152,7 +152,6 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
-				clock-frequency = <400000>;
 				status = "okay";
 
 				sgtl5000: codec@0a {
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index e6cde8aa7ff..6c6a5442800 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -70,7 +70,6 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_a>;
-				clock-frequency = <400000>;
 				status = "okay";
 
 				rtc: rtc@51 {
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index e54fffd4836..468c0a1d48d 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -42,10 +42,9 @@
 			fsl,pins = <689 0x10000		/* DISP1_DRDY	*/
 				    482 0x10000		/* DISP1_HSYNC	*/
 				    489 0x10000		/* DISP1_VSYNC	*/
-				    684 0x10000		/* DISP1_DAT_0	*/
 				    515 0x10000		/* DISP1_DAT_22	*/
 				    523 0x10000		/* DISP1_DAT_23	*/
-				    543 0x10000		/* DISP1_DAT_21	*/
+				    545 0x10000		/* DISP1_DAT_21	*/
 				    553 0x10000		/* DISP1_DAT_20	*/
 				    558 0x10000		/* DISP1_DAT_19	*/
 				    564 0x10000		/* DISP1_DAT_18	*/
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 06ec460b458..281a223591f 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -91,6 +91,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
 			interrupts = <1 13 0xf01>;
+			clocks = <&clks 15>;
 		};
 
 		L2: l2-cache@00a02000 {
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
index 5bb0bf39d3b..c9c44b2f62d 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -42,12 +42,10 @@
 
 	ocp@f1000000 {
 		serial@12000 {
-			clock-frequency = <166666667>;
 			status = "okay";
 		};
 
 		serial@12100 {
-			clock-frequency = <166666667>;
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index d430713ea9b..e4e4930dc5c 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -50,7 +50,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
index 2e3dd34e21a..0196cf6b0ef 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -37,7 +37,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index ef2d8c70570..289e51d8637 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -38,7 +38,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index 1b133e0c566..c3573be7b92 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -73,11 +73,11 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 
 		nand@3000000 {
+			chip-delay = <40>;
 			status = "okay";
 
 			partition@0 {
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index 71902da33d6..5335b1aa860 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -51,7 +51,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 504f16be8b5..12ccf74ac3c 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -78,7 +78,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index 6cae4599c4b..3694e94f6e9 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -96,11 +96,11 @@
 				marvell,function = "gpio";
 			};
 			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
-				marvell,pins = "mpp44";
+				marvell,pins = "mpp46";
 				marvell,function = "gpio";
 			};
 			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
-				marvell,pins = "mpp45";
+				marvell,pins = "mpp47";
 				marvell,function = "gpio";
 			};
 
@@ -115,7 +115,6 @@
 		};
 
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 
@@ -158,14 +157,14 @@
 			gpios = <&gpio0 16 0>;
 			linux,default-trigger = "default-on";
 		};
-		health_led1 {
+		rebuild_led {
+			label = "status:white:rebuild_led";
+			gpios = <&gpio1 4 0>;
+		};
+		health_led {
 			label = "status:red:health_led";
 			gpios = <&gpio1 5 0>;
 		};
-		health_led2 {
-			label = "status:white:health_led";
-			gpios = <&gpio1 4 0>;
-		};
 		backup_led {
 			label = "status:blue:backup_led";
 			gpios = <&gpio0 15 0>;
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index 8db3123ac80..5bbd0542cdd 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -34,7 +34,6 @@
 		};
 
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts
index 9510c9ea666..9f55d95f35f 100644
--- a/arch/arm/boot/dts/kirkwood-lschlv2.dts
+++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts
@@ -13,7 +13,6 @@
 
 	ocp@f1000000 {
 		serial@12000 {
-			clock-frequency = <166666667>;
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts
index 739019c4cba..5c84c118ed8 100644
--- a/arch/arm/boot/dts/kirkwood-lsxhl.dts
+++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts
@@ -13,7 +13,6 @@
 
 	ocp@f1000000 {
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index 662dfd81b1c..758824118a9 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -90,7 +90,6 @@
                 };
 
                 serial@12000 {
-                        clock-frequency = <200000000>;
                         status = "ok";
                 };
 
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index e8e7ecef165..6affd924fe1 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -23,7 +23,6 @@
 		};
 
 		serial@12000 {
-			clock-frequency = <166666667>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 3a178cf708d..a7412b937a8 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -117,7 +117,6 @@
 		};
 
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index ede7fe0d7a8..d27f7245f8e 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -18,12 +18,10 @@
 
 	ocp@f1000000 {
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 
 		serial@12100 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index 842ff95d60d..66eb45b00b2 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -108,7 +108,6 @@
 		};
 
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 2c738d9dc82..fada7e6d24d 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -38,6 +38,7 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupts = <35>, <36>, <37>, <38>;
+			clocks = <&gate_clk 7>;
 		};
 
 		gpio1: gpio@10140 {
@@ -49,6 +50,7 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupts = <39>, <40>, <41>;
+			clocks = <&gate_clk 7>;
 		};
 
 		serial@12000 {
@@ -57,7 +59,6 @@
 			reg-shift = <2>;
 			interrupts = <33>;
 			clocks = <&gate_clk 7>;
-			/* set clock-frequency in board dts */
 			status = "disabled";
 		};
 
@@ -67,7 +68,6 @@
 			reg-shift = <2>;
 			interrupts = <34>;
 			clocks = <&gate_clk 7>;
-			/* set clock-frequency in board dts */
 			status = "disabled";
 		};
 
@@ -75,6 +75,7 @@
 			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
 			reg = <0x10300 0x20>;
 			interrupts = <53>;
+			clocks = <&gate_clk 7>;
 		};
 
 		spi@10600 {
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
index 5a3a58b7e18..0077fc8510b 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "LaCie Ethernet Disk mini V2";
-	compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x";
+	compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory {
 		reg = <0x00000000 0x4000000>; /* 64 MB */
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 8aad00f81ed..f7bec3b1ba3 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -13,6 +13,9 @@
 	compatible = "marvell,orion5x";
 	interrupt-parent = <&intc>;
 
+	aliases {
+		gpio0 = &gpio0;
+	};
 	intc: interrupt-controller {
 		compatible = "marvell,orion-intc", "marvell,intc";
 		interrupt-controller;
@@ -32,7 +35,9 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0x10100 0x40>;
-			ngpio = <32>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <6>, <7>, <8>, <9>;
 		};
 
@@ -91,7 +96,7 @@
 			reg = <0x90000 0x10000>,
 			      <0xf2200000 0x800>;
 			reg-names = "regs", "sram";
-			interrupts = <22>;
+			interrupts = <28>;
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 27f31a5fa49..d3ec32f6b79 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -298,7 +298,7 @@
 				};
 			};
 
-			ab8500@5 {
+			ab8500 {
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 936d2306e7e..7e8769bd597 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -75,6 +75,9 @@
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0xffe01000 0x1000>;
 				interrupts = <0 180 4>;
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 9a428931d04..3d3f64d2111 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -118,6 +118,7 @@
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x50040600 0x20>;
 		interrupts = <1 13 0x304>;
+		clocks = <&tegra_car 132>;
 	};
 
 	intc: interrupt-controller {
@@ -384,7 +385,7 @@
 
 	spi@7000d800 {
 		compatible = "nvidia,tegra20-slink";
-		reg = <0x7000d480 0x200>;
+		reg = <0x7000d800 0x200>;
 		interrupts = <0 83 0x04>;
 		nvidia,dma-request-selector = <&apbdma 17>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 767803e1fd5..dbf46c27256 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -119,6 +119,7 @@
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x50040600 0x20>;
 		interrupts = <1 13 0xf04>;
+		clocks = <&tegra_car 214>;
 	};
 
 	intc: interrupt-controller {
@@ -371,7 +372,7 @@
 
 	spi@7000d800 {
 		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000d480 0x200>;
+		reg = <0x7000d800 0x200>;
 		interrupts = <0 83 0x04>;
 		nvidia,dma-request-selector = <&apbdma 17>;
 		#address-cells = <1>;
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index fbbc5bb022d..6a99e30f81d 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -116,6 +116,7 @@ CONFIG_SND_SOC=y
 CONFIG_SND_MXS_SOC=y
 CONFIG_SND_SOC_MXS_SGTL5000=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index b16bae2c9a6..bd07864f14a 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -126,6 +126,8 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h
index 720799fd3a8..dff714d886d 100644
--- a/arch/arm/include/asm/delay.h
+++ b/arch/arm/include/asm/delay.h
@@ -24,7 +24,7 @@ extern struct arm_delay_ops {
 	void (*delay)(unsigned long);
 	void (*const_udelay)(unsigned long);
 	void (*udelay)(unsigned long);
-	bool const_clock;
+	unsigned long ticks_per_jiffy;
 } arm_delay_ops;
 
 #define __delay(n)		arm_delay_ops.delay(n)
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index 8c5e828f484..91b99abe7a9 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -41,6 +41,13 @@ extern void kunmap_high(struct page *page);
 #endif
 #endif
 
+/*
+ * Needed to be able to broadcast the TLB invalidation for kmap.
+ */
+#ifdef CONFIG_ARM_ERRATA_798181
+#undef ARCH_NEEDS_KMAP_HIGH_GET
+#endif
+
 #ifdef ARCH_NEEDS_KMAP_HIGH_GET
 extern void *kmap_high_get(struct page *page);
 #else
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 863a6611323..a7b85e0d0cc 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -27,6 +27,8 @@ void __check_vmalloc_seq(struct mm_struct *mm);
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
 #define init_new_context(tsk,mm)	({ atomic64_set(&mm->context.id, 0); 0; })
 
+DECLARE_PER_CPU(atomic64_t, active_asids);
+
 #else	/* !CONFIG_CPU_HAS_ASID */
 
 #ifdef CONFIG_MMU
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index 4db8c8820f0..9e9c041358c 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -450,6 +450,21 @@ static inline void local_flush_bp_all(void)
 		isb();
 }
 
+#ifdef CONFIG_ARM_ERRATA_798181
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+	/*
+	 * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0.
+	 */
+	asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
+	dsb();
+}
+#else
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+}
+#endif
+
 /*
  *	flush_pmd_entry
  *
diff --git a/arch/arm/include/asm/xen/events.h b/arch/arm/include/asm/xen/events.h
index 5c27696de14..8b1f37bfeee 100644
--- a/arch/arm/include/asm/xen/events.h
+++ b/arch/arm/include/asm/xen/events.h
@@ -2,6 +2,7 @@
 #define _ASM_ARM_XEN_EVENTS_H
 
 #include <asm/ptrace.h>
+#include <asm/atomic.h>
 
 enum ipi_vector {
 	XEN_PLACEHOLDER_VECTOR,
@@ -15,26 +16,8 @@ static inline int xen_irqs_disabled(struct pt_regs *regs)
 	return raw_irqs_disabled_flags(regs->ARM_cpsr);
 }
 
-/*
- * We cannot use xchg because it does not support 8-byte
- * values. However it is safe to use {ldr,dtd}exd directly because all
- * platforms which Xen can run on support those instructions.
- */
-static inline xen_ulong_t xchg_xen_ulong(xen_ulong_t *ptr, xen_ulong_t val)
-{
-	xen_ulong_t oldval;
-	unsigned int tmp;
-
-	wmb();
-	asm volatile("@ xchg_xen_ulong\n"
-		"1:     ldrexd  %0, %H0, [%3]\n"
-		"       strexd  %1, %2, %H2, [%3]\n"
-		"       teq     %1, #0\n"
-		"       bne     1b"
-		: "=&r" (oldval), "=&r" (tmp)
-		: "r" (val), "r" (ptr)
-		: "memory", "cc");
-	return oldval;
-}
+#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr),	\
+							    atomic64_t,	\
+							    counter), (val))
 
 #endif /* _ASM_ARM_XEN_EVENTS_H */
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 3248cde504e..fefd7f97143 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -276,7 +276,13 @@ ENDPROC(ftrace_graph_caller_old)
  */
 
 .macro mcount_enter
+/*
+ * This pad compensates for the push {lr} at the call site.  Note that we are
+ * unable to unwind through a function which does not otherwise save its lr.
+ */
+ UNWIND(.pad	#4)
 	stmdb	sp!, {r0-r3, lr}
+ UNWIND(.save	{r0-r3, lr})
 .endm
 
 .macro mcount_get_lr reg
@@ -289,6 +295,7 @@ ENDPROC(ftrace_graph_caller_old)
 .endm
 
 ENTRY(__gnu_mcount_nc)
+UNWIND(.fnstart)
 #ifdef CONFIG_DYNAMIC_FTRACE
 	mov	ip, lr
 	ldmia	sp!, {lr}
@@ -296,17 +303,22 @@ ENTRY(__gnu_mcount_nc)
 #else
 	__mcount
 #endif
+UNWIND(.fnend)
 ENDPROC(__gnu_mcount_nc)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(ftrace_caller)
+UNWIND(.fnstart)
 	__ftrace_caller
+UNWIND(.fnend)
 ENDPROC(ftrace_caller)
 #endif
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 ENTRY(ftrace_graph_caller)
+UNWIND(.fnstart)
 	__ftrace_graph_caller
+UNWIND(.fnend)
 ENDPROC(ftrace_graph_caller)
 #endif
 
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index e0eb9a1cae7..8bac553fe21 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -267,7 +267,7 @@ __create_page_tables:
 	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]
 
-#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
+#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
 	sub	r4, r4, #4			@ Fixup page table pointer
 						@ for 64-bit descriptors
 #endif
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 96093b75ab9..5dc1aa6f0f7 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -966,7 +966,7 @@ static void reset_ctrl_regs(void *unused)
 	}
 
 	if (err) {
-		pr_warning("CPU %d debug is powered down!\n", cpu);
+		pr_warn_once("CPU %d debug is powered down!\n", cpu);
 		cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
 		return;
 	}
@@ -987,7 +987,7 @@ clear_vcr:
 	isb();
 
 	if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
-		pr_warning("CPU %d failed to disable vector catch\n", cpu);
+		pr_warn_once("CPU %d failed to disable vector catch\n", cpu);
 		return;
 	}
 
@@ -1007,7 +1007,7 @@ clear_vcr:
 	}
 
 	if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
-		pr_warning("CPU %d failed to clear debug register pairs\n", cpu);
+		pr_warn_once("CPU %d failed to clear debug register pairs\n", cpu);
 		return;
 	}
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 3f6cbb2e3ed..d343a6c3a6d 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -353,6 +353,23 @@ void __init early_print(const char *str, ...)
 	printk("%s", buf);
 }
 
+static void __init cpuid_init_hwcaps(void)
+{
+	unsigned int divide_instrs;
+
+	if (cpu_architecture() < CPU_ARCH_ARMv7)
+		return;
+
+	divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24;
+
+	switch (divide_instrs) {
+	case 2:
+		elf_hwcap |= HWCAP_IDIVA;
+	case 1:
+		elf_hwcap |= HWCAP_IDIVT;
+	}
+}
+
 static void __init feat_v6_fixup(void)
 {
 	int id = read_cpuid_id();
@@ -483,8 +500,11 @@ static void __init setup_processor(void)
 	snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
 		 list->elf_name, ENDIANNESS);
 	elf_hwcap = list->elf_hwcap;
+
+	cpuid_init_hwcaps();
+
 #ifndef CONFIG_ARM_THUMB
-	elf_hwcap &= ~HWCAP_THUMB;
+	elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
 #endif
 
 	feat_v6_fixup();
@@ -524,7 +544,7 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
 
-#ifndef CONFIG_LPAE
+#ifndef CONFIG_ARM_LPAE
 	if (bank->start + size < bank->start) {
 		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
 			"32-bit physical address space\n", (long long)start);
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 31644f1978d..1f2ccccaf00 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -480,7 +480,7 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
 	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
 			  CLOCK_EVT_FEAT_PERIODIC |
 			  CLOCK_EVT_FEAT_DUMMY;
-	evt->rating	= 400;
+	evt->rating	= 100;
 	evt->mult	= 1;
 	evt->set_mode	= broadcast_timer_set_mode;
 
@@ -673,9 +673,6 @@ static int cpufreq_callback(struct notifier_block *nb,
 	if (freq->flags & CPUFREQ_CONST_LOOPS)
 		return NOTIFY_OK;
 
-	if (arm_delay_ops.const_clock)
-		return NOTIFY_OK;
-
 	if (!per_cpu(l_p_j_ref, cpu)) {
 		per_cpu(l_p_j_ref, cpu) =
 			per_cpu(cpu_data, cpu).loops_per_jiffy;
diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c
index bd030053139..e82e1d24877 100644
--- a/arch/arm/kernel/smp_tlb.c
+++ b/arch/arm/kernel/smp_tlb.c
@@ -12,6 +12,7 @@
 
 #include <asm/smp_plat.h>
 #include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
 
 /**********************************************************************/
 
@@ -69,12 +70,72 @@ static inline void ipi_flush_bp_all(void *ignored)
 	local_flush_bp_all();
 }
 
+#ifdef CONFIG_ARM_ERRATA_798181
+static int erratum_a15_798181(void)
+{
+	unsigned int midr = read_cpuid_id();
+
+	/* Cortex-A15 r0p0..r3p2 affected */
+	if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
+		return 0;
+	return 1;
+}
+#else
+static int erratum_a15_798181(void)
+{
+	return 0;
+}
+#endif
+
+static void ipi_flush_tlb_a15_erratum(void *arg)
+{
+	dmb();
+}
+
+static void broadcast_tlb_a15_erratum(void)
+{
+	if (!erratum_a15_798181())
+		return;
+
+	dummy_flush_tlb_a15_erratum();
+	smp_call_function_many(cpu_online_mask, ipi_flush_tlb_a15_erratum,
+			       NULL, 1);
+}
+
+static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
+{
+	int cpu;
+	cpumask_t mask = { CPU_BITS_NONE };
+
+	if (!erratum_a15_798181())
+		return;
+
+	dummy_flush_tlb_a15_erratum();
+	for_each_online_cpu(cpu) {
+		if (cpu == smp_processor_id())
+			continue;
+		/*
+		 * We only need to send an IPI if the other CPUs are running
+		 * the same ASID as the one being invalidated. There is no
+		 * need for locking around the active_asids check since the
+		 * switch_mm() function has at least one dmb() (as required by
+		 * this workaround) in case a context switch happens on
+		 * another CPU after the condition below.
+		 */
+		if (atomic64_read(&mm->context.id) ==
+		    atomic64_read(&per_cpu(active_asids, cpu)))
+			cpumask_set_cpu(cpu, &mask);
+	}
+	smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1);
+}
+
 void flush_tlb_all(void)
 {
 	if (tlb_ops_need_broadcast())
 		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
 	else
 		local_flush_tlb_all();
+	broadcast_tlb_a15_erratum();
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
@@ -83,6 +144,7 @@ void flush_tlb_mm(struct mm_struct *mm)
 		on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1);
 	else
 		local_flush_tlb_mm(mm);
+	broadcast_tlb_mm_a15_erratum(mm);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
@@ -95,6 +157,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 					&ta, 1);
 	} else
 		local_flush_tlb_page(vma, uaddr);
+	broadcast_tlb_mm_a15_erratum(vma->vm_mm);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
@@ -105,6 +168,7 @@ void flush_tlb_kernel_page(unsigned long kaddr)
 		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
 	} else
 		local_flush_tlb_kernel_page(kaddr);
+	broadcast_tlb_a15_erratum();
 }
 
 void flush_tlb_range(struct vm_area_struct *vma,
@@ -119,6 +183,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
 					&ta, 1);
 	} else
 		local_flush_tlb_range(vma, start, end);
+	broadcast_tlb_mm_a15_erratum(vma->vm_mm);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
@@ -130,6 +195,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 		on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
 	} else
 		local_flush_tlb_kernel_range(start, end);
+	broadcast_tlb_a15_erratum();
 }
 
 void flush_bp_all(void)
diff --git a/arch/arm/kvm/vgic.c b/arch/arm/kvm/vgic.c
index c9a17316e9f..0e4cfe123b3 100644
--- a/arch/arm/kvm/vgic.c
+++ b/arch/arm/kvm/vgic.c
@@ -883,8 +883,7 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
 			  lr, irq, vgic_cpu->vgic_lr[lr]);
 		BUG_ON(!test_bit(lr, vgic_cpu->lr_used));
 		vgic_cpu->vgic_lr[lr] |= GICH_LR_PENDING_BIT;
-
-		goto out;
+		return true;
 	}
 
 	/* Try to use another LR for this interrupt */
@@ -898,7 +897,6 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
 	vgic_cpu->vgic_irq_lr_map[irq] = lr;
 	set_bit(lr, vgic_cpu->lr_used);
 
-out:
 	if (!vgic_irq_is_edge(vcpu, irq))
 		vgic_cpu->vgic_lr[lr] |= GICH_LR_EOI;
 
@@ -1018,21 +1016,6 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 
 	kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr);
 
-	/*
-	 * We do not need to take the distributor lock here, since the only
-	 * action we perform is clearing the irq_active_bit for an EOIed
-	 * level interrupt.  There is a potential race with
-	 * the queuing of an interrupt in __kvm_vgic_flush_hwstate(), where we
-	 * check if the interrupt is already active. Two possibilities:
-	 *
-	 * - The queuing is occurring on the same vcpu: cannot happen,
-	 *   as we're already in the context of this vcpu, and
-	 *   executing the handler
-	 * - The interrupt has been migrated to another vcpu, and we
-	 *   ignore this interrupt for this run. Big deal. It is still
-	 *   pending though, and will get considered when this vcpu
-	 *   exits.
-	 */
 	if (vgic_cpu->vgic_misr & GICH_MISR_EOI) {
 		/*
 		 * Some level interrupts have been EOIed. Clear their
@@ -1054,6 +1037,13 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 			} else {
 				vgic_cpu_irq_clear(vcpu, irq);
 			}
+
+			/*
+			 * Despite being EOIed, the LR may not have
+			 * been marked as empty.
+			 */
+			set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr);
+			vgic_cpu->vgic_lr[lr] &= ~GICH_LR_ACTIVE_BIT;
 		}
 	}
 
@@ -1064,9 +1054,8 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 }
 
 /*
- * Sync back the VGIC state after a guest run. We do not really touch
- * the distributor here (the irq_pending_on_cpu bit is safe to set),
- * so there is no need for taking its lock.
+ * Sync back the VGIC state after a guest run. The distributor lock is
+ * needed so we don't get preempted in the middle of the state processing.
  */
 static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 {
@@ -1112,10 +1101,14 @@ void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
 
 void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 {
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+
 	if (!irqchip_in_kernel(vcpu->kvm))
 		return;
 
+	spin_lock(&dist->lock);
 	__kvm_vgic_sync_hwstate(vcpu);
+	spin_unlock(&dist->lock);
 }
 
 int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu)
diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c
index 6b93f6a1a3c..64dbfa57204 100644
--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@@ -58,7 +58,7 @@ static void __timer_delay(unsigned long cycles)
 static void __timer_const_udelay(unsigned long xloops)
 {
 	unsigned long long loops = xloops;
-	loops *= loops_per_jiffy;
+	loops *= arm_delay_ops.ticks_per_jiffy;
 	__timer_delay(loops >> UDELAY_SHIFT);
 }
 
@@ -73,11 +73,13 @@ void __init register_current_timer_delay(const struct delay_timer *timer)
 		pr_info("Switching to timer-based delay loop\n");
 		delay_timer			= timer;
 		lpj_fine			= timer->freq / HZ;
-		loops_per_jiffy			= lpj_fine;
+
+		/* cpufreq may scale loops_per_jiffy, so keep a private copy */
+		arm_delay_ops.ticks_per_jiffy	= lpj_fine;
 		arm_delay_ops.delay		= __timer_delay;
 		arm_delay_ops.const_udelay	= __timer_const_udelay;
 		arm_delay_ops.udelay		= __timer_udelay;
-		arm_delay_ops.const_clock	= true;
+
 		delay_calibrated		= true;
 	} else {
 		pr_info("Ignoring duplicate/late registration of read_current_timer delay\n");
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index d912e7397ec..94b0650ea98 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -14,31 +14,15 @@
 
 	.text
 	.align	5
-	.word	0
-
-1:	subs	r2, r2, #4		@ 1 do we have enough
-	blt	5f			@ 1 bytes to align with?
-	cmp	r3, #2			@ 1
-	strltb	r1, [ip], #1		@ 1
-	strleb	r1, [ip], #1		@ 1
-	strb	r1, [ip], #1		@ 1
-	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
-/*
- * The pointer is now aligned and the length is adjusted.  Try doing the
- * memset again.
- */
 
 ENTRY(memset)
-/*
- * Preserve the contents of r0 for the return value.
- */
-	mov	ip, r0
-	ands	r3, ip, #3		@ 1 unaligned?
-	bne	1b			@ 1
+	ands	r3, r0, #3		@ 1 unaligned?
+	mov	ip, r0			@ preserve r0 as return value
+	bne	6f			@ 1
 /*
  * we know that the pointer in ip is aligned to a word boundary.
  */
-	orr	r1, r1, r1, lsl #8
+1:	orr	r1, r1, r1, lsl #8
 	orr	r1, r1, r1, lsl #16
 	mov	r3, r1
 	cmp	r2, #16
@@ -127,4 +111,13 @@ ENTRY(memset)
 	tst	r2, #1
 	strneb	r1, [ip], #1
 	mov	pc, lr
+
+6:	subs	r2, r2, #4		@ 1 do we have enough
+	blt	5b			@ 1 bytes to align with?
+	cmp	r3, #2			@ 1
+	strltb	r1, [ip], #1		@ 1
+	strleb	r1, [ip], #1		@ 1
+	strb	r1, [ip], #1		@ 1
+	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
+	b	1b
 ENDPROC(memset)
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 2ea7059b840..c20a870ea9c 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -176,6 +176,7 @@ static struct w1_gpio_platform_data w1_gpio_pdata = {
 	/* If you choose to use a pin other than PB16 it needs to be 3.3V */
 	.pin		= AT91_PIN_PB16,
 	.is_open_drain  = 1,
+	.ext_pullup_enable_pin	= -EINVAL,
 };
 
 static struct platform_device w1_device = {
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index a033b8df9fb..869cbecf00b 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -188,6 +188,7 @@ static struct spi_board_info portuxg20_spi_devices[] = {
 static struct w1_gpio_platform_data w1_gpio_pdata = {
 	.pin		= AT91_PIN_PA29,
 	.is_open_drain	= 1,
+	.ext_pullup_enable_pin	= -EINVAL,
 };
 
 static struct platform_device w1_device = {
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index eed465ab0dd..5fc23771c15 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -209,6 +209,14 @@ extern int at91_get_gpio_value(unsigned pin);
 extern void at91_gpio_suspend(void);
 extern void at91_gpio_resume(void);
 
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+
 #endif	/* __ASSEMBLY__ */
 
 #endif
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 8e210262aee..e0ca5917102 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -92,23 +92,21 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value)
 
 void at91_irq_suspend(void)
 {
-	int i = 0, bit;
+	int bit = -1;
 
 	if (has_aic5()) {
 		/* disable enabled irqs */
-		while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+		while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
 			at91_aic_write(AT91_AIC5_SSR,
 				       bit & AT91_AIC5_INTSEL_MSK);
 			at91_aic_write(AT91_AIC5_IDCR, 1);
-			i = bit;
 		}
 		/* enable wakeup irqs */
-		i = 0;
-		while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+		bit = -1;
+		while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
 			at91_aic_write(AT91_AIC5_SSR,
 				       bit & AT91_AIC5_INTSEL_MSK);
 			at91_aic_write(AT91_AIC5_IECR, 1);
-			i = bit;
 		}
 	} else {
 		at91_aic_write(AT91_AIC_IDCR, *backups);
@@ -118,23 +116,21 @@ void at91_irq_suspend(void)
 
 void at91_irq_resume(void)
 {
-	int i = 0, bit;
+	int bit = -1;
 
 	if (has_aic5()) {
 		/* disable wakeup irqs */
-		while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+		while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
 			at91_aic_write(AT91_AIC5_SSR,
 				       bit & AT91_AIC5_INTSEL_MSK);
 			at91_aic_write(AT91_AIC5_IDCR, 1);
-			i = bit;
 		}
 		/* enable irqs disabled for suspend */
-		i = 0;
-		while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+		bit = -1;
+		while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
 			at91_aic_write(AT91_AIC5_SSR,
 				       bit & AT91_AIC5_INTSEL_MSK);
 			at91_aic_write(AT91_AIC5_IECR, 1);
-			i = bit;
 		}
 	} else {
 		at91_aic_write(AT91_AIC_IDCR, *wakeups);
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index adb6db888a1..73f1f250403 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -201,7 +201,10 @@ extern u32 at91_slow_clock_sz;
 
 static int at91_pm_enter(suspend_state_t state)
 {
-	at91_gpio_suspend();
+	if (of_have_populated_dt())
+		at91_pinctrl_gpio_suspend();
+	else
+		at91_gpio_suspend();
 	at91_irq_suspend();
 
 	pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
@@ -286,7 +289,10 @@ static int at91_pm_enter(suspend_state_t state)
 error:
 	target_state = PM_SUSPEND_ON;
 	at91_irq_resume();
-	at91_gpio_resume();
+	if (of_have_populated_dt())
+		at91_pinctrl_gpio_resume();
+	else
+		at91_gpio_resume();
 	return 0;
 }
 
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index e698f26cc0c..52e4bb5cf12 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -22,19 +22,9 @@
 
 static struct map_desc cns3xxx_io_desc[] __initdata = {
 	{
-		.virtual	= CNS3XXX_TC11MP_TWD_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
+		.virtual	= CNS3XXX_TC11MP_SCU_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
+		.length		= SZ_8K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,
diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
index 191c8e57f28..b1021aafa48 100644
--- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
+++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
@@ -94,10 +94,10 @@
 #define RTC_INTR_STS_OFFSET			0x34
 
 #define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT			0xFFF07000	/* Misc Control */
+#define CNS3XXX_MISC_BASE_VIRT			0xFB000000	/* Misc Control */
 
 #define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT			0xFFF08000
+#define CNS3XXX_PM_BASE_VIRT			0xFB001000
 
 #define PM_CLK_GATE_OFFSET			0x00
 #define PM_SOFT_RST_OFFSET			0x04
@@ -109,7 +109,7 @@
 #define PM_PLL_HM_PD_OFFSET			0x1C
 
 #define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT			0xFFF09000
+#define CNS3XXX_UART0_BASE_VIRT			0xFB002000
 
 #define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
 #define CNS3XXX_UART1_BASE_VIRT			0xFFF0A000
@@ -130,7 +130,7 @@
 #define CNS3XXX_I2S_BASE_VIRT			0xFFF10000
 
 #define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFFF10800
+#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFB003000
 
 #define TIMER1_COUNTER_OFFSET			0x00
 #define TIMER1_AUTO_RELOAD_OFFSET		0x04
@@ -227,16 +227,16 @@
  * Testchip peripheral and fpga gic regions
  */
 #define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFF000000
+#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFB004000
 
 #define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	0xFF000100
+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
 
 #define CNS3XXX_TC11MP_TWD_BASE			0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT		0xFF000600
+#define CNS3XXX_TC11MP_TWD_BASE_VIRT		(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
 
 #define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	0xFF001000
+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
 
 #define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
 #define CNS3XXX_TC11MP_L220_BASE_VIRT		0xFF002000
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index a685e9706b7..45b7c71d9cc 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -743,6 +743,9 @@ EXPORT_SYMBOL(edma_free_channel);
  */
 int edma_alloc_slot(unsigned ctlr, int slot)
 {
+	if (!edma_cc[ctlr])
+		return -EINVAL;
+
 	if (slot >= 0)
 		slot = EDMA_CHAN_SLOT(slot);
 
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
index d2afb4dd82a..b5cc77d2380 100644
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -47,9 +47,13 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
 
 static inline void putc(int c)
 {
-	/* Transmit fifo not full?  */
-	while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
-		;
+	int i;
+
+	for (i = 0; i < 10000; i++) {
+		/* Transmit fifo not full? */
+		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
+			break;
+	}
 
 	__raw_writeb(c, PHYS_UART_DATA);
 }
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index abda5a18a66..0f2111a1131 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -67,6 +67,7 @@ config ARCH_NETWINDER
 	select ISA
 	select ISA_DMA
 	select PCI
+	select VIRT_TO_BUS
 	help
 	  Say Y here if you intend to run this kernel on the Rebel.COM
 	  NetWinder.  Information about this machine can be found at:
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 74e3a34d78b..2193c834f55 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -257,6 +257,7 @@ int __init mx35_clocks_init(void)
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
+	clk_register_clkdev(clk[admux_gate], "audmux", NULL);
 
 	clk_prepare_enable(clk[spba_gate]);
 	clk_prepare_enable(clk[gpio1_gate]);
@@ -264,6 +265,8 @@ int __init mx35_clocks_init(void)
 	clk_prepare_enable(clk[gpio3_gate]);
 	clk_prepare_enable(clk[iim_gate]);
 	clk_prepare_enable(clk[emi_gate]);
+	clk_prepare_enable(clk[max_gate]);
+	clk_prepare_enable(clk[iomuxc_gate]);
 
 	/*
 	 * SCC is needed to boot via mmc after a watchdog reset. The clock code
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 7b025ee528a..d38e54f5b6d 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -115,7 +115,7 @@ static const char *gpu2d_core_sels[]	= { "axi", "pll3_usb_otg", "pll2_pfd0_352m"
 static const char *gpu3d_core_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
 static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
 static const char *ipu_sels[]		= { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
-static const char *ldb_di_sels[]	= { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", };
+static const char *ldb_di_sels[]	= { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
 static const char *ipu_di_pre_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
 static const char *ipu1_di0_sels[]	= { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *ipu1_di1_sels[]	= { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
@@ -172,7 +172,7 @@ static struct clk *clk[clk_max];
 static struct clk_onecell_data clk_data;
 
 static enum mx6q_clks const clks_init_on[] __initconst = {
-	mmdc_ch0_axi, rom,
+	mmdc_ch0_axi, rom, pll1_sys,
 };
 
 static struct clk_div_table clk_enet_ref_table[] = {
@@ -443,7 +443,6 @@ int __init mx6q_clocks_init(void)
 
 	clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[twd], NULL, "smp_twd");
 	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
 	clk_register_clkdev(clk[ahb], "ahb", NULL);
 	clk_register_clkdev(clk[cko1], "cko1", NULL);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 5a800bfcec5..5bf4a97ab24 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -110,6 +110,8 @@ void tzic_handle_irq(struct pt_regs *);
 
 extern void imx_enable_cpu(int cpu, bool enable);
 extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern u32 imx_get_cpu_arg(int cpu);
+extern void imx_set_cpu_arg(int cpu, u32 arg);
 extern void v7_cpu_resume(void);
 extern u32 *pl310_get_save_ptr(void);
 #ifdef CONFIG_SMP
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index 921fc155585..a58c8b0527c 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -26,16 +26,16 @@ ENDPROC(v7_secondary_startup)
 
 #ifdef CONFIG_PM
 /*
- * The following code is located into the .data section.  This is to
- * allow phys_l2x0_saved_regs to be accessed with a relative load
- * as we are running on physical address here.
+ * The following code must assume it is running from physical address
+ * where absolute virtual addresses to the data section have to be
+ * turned into relative ones.
  */
-	.data
-	.align
 
 #ifdef CONFIG_CACHE_L2X0
 	.macro	pl310_resume
-	ldr	r2, phys_l2x0_saved_regs
+	adr	r0, l2x0_saved_regs_offset
+	ldr	r2, [r0]
+	add	r2, r2, r0
 	ldr	r0, [r2, #L2X0_R_PHY_BASE]	@ get physical base of l2x0
 	ldr	r1, [r2, #L2X0_R_AUX_CTRL]	@ get aux_ctrl value
 	str	r1, [r0, #L2X0_AUX_CTRL]	@ restore aux_ctrl
@@ -43,9 +43,9 @@ ENDPROC(v7_secondary_startup)
 	str	r1, [r0, #L2X0_CTRL]		@ re-enable L2
 	.endm
 
-	.globl	phys_l2x0_saved_regs
-phys_l2x0_saved_regs:
-        .long   0
+l2x0_saved_regs_offset:
+	.word	l2x0_saved_regs - .
+
 #else
 	.macro	pl310_resume
 	.endm
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 7bc5fe15dda..361a253e2b6 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -46,11 +46,23 @@ static inline void cpu_enter_lowpower(void)
 void imx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
+	/*
+	 * We use the cpu jumping argument register to sync with
+	 * imx_cpu_kill() which is running on cpu0 and waiting for
+	 * the register being cleared to kill the cpu.
+	 */
+	imx_set_cpu_arg(cpu, ~0);
 	cpu_do_idle();
 }
 
 int imx_cpu_kill(unsigned int cpu)
 {
+	unsigned long timeout = jiffies + msecs_to_jiffies(50);
+
+	while (imx_get_cpu_arg(cpu) == 0)
+		if (time_after(jiffies, timeout))
+			return 0;
 	imx_enable_cpu(cpu, false);
+	imx_set_cpu_arg(cpu, 0);
 	return 1;
 }
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
index 03b65e5ea54..82348391582 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -27,6 +27,11 @@ static const char * const imx25_dt_board_compat[] __initconst = {
 	NULL
 };
 
+static void __init imx25_timer_init(void)
+{
+	mx25_clocks_init_dt();
+}
+
 DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
 	.map_io		= mx25_map_io,
 	.init_early	= imx25_init_early,
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index ee42d20cba1..5faba7a3c95 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -22,8 +22,6 @@
 #include "common.h"
 #include "hardware.h"
 
-extern unsigned long phys_l2x0_saved_regs;
-
 static int imx6q_suspend_finish(unsigned long val)
 {
 	cpu_do_idle();
@@ -57,18 +55,5 @@ static const struct platform_suspend_ops imx6q_pm_ops = {
 
 void __init imx6q_pm_init(void)
 {
-	/*
-	 * The l2x0 core code provides an infrastucture to save and restore
-	 * l2x0 registers across suspend/resume cycle.  But because imx6q
-	 * retains L2 content during suspend and needs to resume L2 before
-	 * MMU is enabled, it can only utilize register saving support and
-	 * have to take care of restoring on its own.  So we save physical
-	 * address of the data structure used by l2x0 core to save registers,
-	 * and later restore the necessary ones in imx6q resume entry.
-	 */
-#ifdef CONFIG_CACHE_L2X0
-	phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
-#endif
-
 	suspend_set_ops(&imx6q_pm_ops);
 }
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index e15f1555c59..09a742f8c7a 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -43,6 +43,18 @@ void imx_set_cpu_jump(int cpu, void *jump_addr)
 		       src_base + SRC_GPR1 + cpu * 8);
 }
 
+u32 imx_get_cpu_arg(int cpu)
+{
+	cpu = cpu_logical_map(cpu);
+	return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
+void imx_set_cpu_arg(int cpu, u32 arg)
+{
+	cpu = cpu_logical_map(cpu);
+	writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
 void imx_src_prepare_restart(void)
 {
 	u32 val;
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index d42730a1d4a..d599e354ca5 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -163,6 +163,7 @@ static struct platform_device vulcan_max6369 = {
 
 static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
 	.pin			= 14,
+	.ext_pullup_enable_pin	= -EINVAL,
 };
 
 static struct platform_device vulcan_w1_gpio = {
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 2e73e9d53f7..d367aa6b47b 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -41,16 +41,12 @@ static void __init kirkwood_legacy_clk_init(void)
 
 	struct device_node *np = of_find_compatible_node(
 		NULL, NULL, "marvell,kirkwood-gating-clock");
-
 	struct of_phandle_args clkspec;
+	struct clk *clk;
 
 	clkspec.np = np;
 	clkspec.args_count = 1;
 
-	clkspec.args[0] = CGC_BIT_GE0;
-	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
-			 of_clk_get_from_provider(&clkspec));
-
 	clkspec.args[0] = CGC_BIT_PEX0;
 	orion_clkdev_add("0", "pcie",
 			 of_clk_get_from_provider(&clkspec));
@@ -59,9 +55,24 @@ static void __init kirkwood_legacy_clk_init(void)
 	orion_clkdev_add("1", "pcie",
 			 of_clk_get_from_provider(&clkspec));
 
-	clkspec.args[0] = CGC_BIT_GE1;
-	orion_clkdev_add(NULL, "mv643xx_eth_port.1",
+	clkspec.args[0] = CGC_BIT_SDIO;
+	orion_clkdev_add(NULL, "mvsdio",
 			 of_clk_get_from_provider(&clkspec));
+
+	/*
+	 * The ethernet interfaces forget the MAC address assigned by
+	 * u-boot if the clocks are turned off. Until proper DT support
+	 * is available we always enable them for now.
+	 */
+	clkspec.args[0] = CGC_BIT_GE0;
+	clk = of_clk_get_from_provider(&clkspec);
+	orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
+	clk_prepare_enable(clk);
+
+	clkspec.args[0] = CGC_BIT_GE1;
+	clk = of_clk_get_from_provider(&clkspec);
+	orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
+	clk_prepare_enable(clk);
 }
 
 static void __init kirkwood_of_clk_init(void)
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
index f655b2637b0..e5f70415905 100644
--- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
@@ -20,10 +20,15 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
 	.duplex         = DUPLEX_FULL,
 };
 
+static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
+};
+
 void __init iomega_ix2_200_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
+	kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
+	kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
 }
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 1c6e736cbbf..08dd739aa70 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -53,6 +53,8 @@ static struct mv_sata_platform_data guruplug_sata_data = {
 
 static struct mvsdio_platform_data guruplug_mvsdio_data = {
 	/* unfortunately the CD signal has not been connected */
+	.gpio_card_detect = -1,
+	.gpio_write_protect = -1,
 };
 
 static struct gpio_led guruplug_led_pins[] = {
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 8ddd69fdc93..6a6eb548307 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -55,6 +55,7 @@ static struct mv_sata_platform_data openrd_sata_data = {
 
 static struct mvsdio_platform_data openrd_mvsdio_data = {
 	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+	.gpio_write_protect = -1,
 };
 
 static unsigned int openrd_mpp_config[] __initdata = {
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index c7d93b48926..d24223166e0 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -69,6 +69,7 @@ static struct mv_sata_platform_data rd88f6281_sata_data = {
 
 static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
 	.gpio_card_detect = 28,
+	.gpio_write_protect = -1,
 };
 
 static unsigned int rd88f6281_mpp_config[] __initdata = {
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index d1e2d595e79..f62b68d926f 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 2969027f02f..f9fd77e8f1f 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -62,7 +62,10 @@ static int msm_timer_set_next_event(unsigned long cycles,
 {
 	u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
 
-	writel_relaxed(0, event_base + TIMER_CLEAR);
+	ctrl &= ~TIMER_ENABLE_EN;
+	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+
+	writel_relaxed(ctrl, event_base + TIMER_CLEAR);
 	writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
 	writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
 	return 0;
diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c
index 274ff58271d..d5970f5a1e8 100644
--- a/arch/arm/mach-mvebu/irq-armada-370-xp.c
+++ b/arch/arm/mach-mvebu/irq-armada-370-xp.c
@@ -44,6 +44,8 @@
 
 #define ARMADA_370_XP_MAX_PER_CPU_IRQS		(28)
 
+#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ	(5)
+
 #define ACTIVE_DOORBELLS			(8)
 
 static DEFINE_RAW_SPINLOCK(irq_controller_lock);
@@ -59,36 +61,26 @@ static struct irq_domain *armada_370_xp_mpic_domain;
  */
 static void armada_370_xp_irq_mask(struct irq_data *d)
 {
-#ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
 		writel(hwirq, main_int_base +
 				ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
 	else
 		writel(hwirq, per_cpu_int_base +
 				ARMADA_370_XP_INT_SET_MASK_OFFS);
-#else
-	writel(irqd_to_hwirq(d),
-	       per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS);
-#endif
 }
 
 static void armada_370_xp_irq_unmask(struct irq_data *d)
 {
-#ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
 		writel(hwirq, main_int_base +
 				ARMADA_370_XP_INT_SET_ENABLE_OFFS);
 	else
 		writel(hwirq, per_cpu_int_base +
 				ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
-#else
-	writel(irqd_to_hwirq(d),
-	       per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
-#endif
 }
 
 #ifdef CONFIG_SMP
@@ -144,10 +136,14 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
 				      unsigned int virq, irq_hw_number_t hw)
 {
 	armada_370_xp_irq_mask(irq_get_irq_data(virq));
-	writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
+	if (hw != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
+		writel(hw, per_cpu_int_base +
+			ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+	else
+		writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
 	irq_set_status_flags(virq, IRQ_LEVEL);
 
-	if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) {
+	if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {
 		irq_set_percpu_devid(virq);
 		irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
 					handle_percpu_devid_irq);
diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c
index 8fb23af154b..e26eeba4659 100644
--- a/arch/arm/mach-mxs/icoll.c
+++ b/arch/arm/mach-mxs/icoll.c
@@ -100,7 +100,7 @@ static struct irq_domain_ops icoll_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
-void __init icoll_of_init(struct device_node *np,
+static void __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
 	/*
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 05218671334..e7b781d3788 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -41,8 +41,6 @@ static struct fb_videomode mx23evk_video_modes[] = {
 		.lower_margin	= 4,
 		.hsync_len	= 1,
 		.vsync_len	= 1,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
 	},
 };
 
@@ -59,8 +57,6 @@ static struct fb_videomode mx28evk_video_modes[] = {
 		.lower_margin	= 10,
 		.hsync_len	= 10,
 		.vsync_len	= 10,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
 	},
 };
 
@@ -77,7 +73,6 @@ static struct fb_videomode m28evk_video_modes[] = {
 		.lower_margin	= 45,
 		.hsync_len	= 1,
 		.vsync_len	= 1,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT,
 	},
 };
 
@@ -94,9 +89,7 @@ static struct fb_videomode apx4devkit_video_modes[] = {
 		.lower_margin	= 13,
 		.hsync_len	= 48,
 		.vsync_len	= 3,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
-				  FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	},
 };
 
@@ -113,9 +106,7 @@ static struct fb_videomode apf28dev_video_modes[] = {
 		.lower_margin = 0x15,
 		.hsync_len = 64,
 		.vsync_len = 4,
-		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
-				FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				FB_SYNC_DOTCLK_FAILING_ACT,
+		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	},
 };
 
@@ -132,7 +123,6 @@ static struct fb_videomode cfa10049_video_modes[] = {
 		.lower_margin	= 2,
 		.hsync_len	= 15,
 		.vsync_len	= 15,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT
 	},
 };
 
@@ -259,6 +249,8 @@ static void __init imx23_evk_init(void)
 	mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
 	mxsfb_pdata.default_bpp = 32;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+				MXSFB_SYNC_DOTCLK_FAILING_ACT;
 }
 
 static inline void enable_clk_enet_out(void)
@@ -278,6 +270,8 @@ static void __init imx28_evk_init(void)
 	mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
 	mxsfb_pdata.default_bpp = 32;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+				MXSFB_SYNC_DOTCLK_FAILING_ACT;
 
 	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
 }
@@ -297,6 +291,7 @@ static void __init m28evk_init(void)
 	mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
 	mxsfb_pdata.default_bpp = 16;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
 }
 
 static void __init sc_sps1_init(void)
@@ -322,6 +317,8 @@ static void __init apx4devkit_init(void)
 	mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes);
 	mxsfb_pdata.default_bpp = 32;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+				MXSFB_SYNC_DOTCLK_FAILING_ACT;
 }
 
 #define ENET0_MDC__GPIO_4_0	MXS_GPIO_NR(4, 0)
@@ -402,17 +399,18 @@ static void __init cfa10049_init(void)
 {
 	enable_clk_enet_out();
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
+
+	mxsfb_pdata.mode_list = cfa10049_video_modes;
+	mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
+	mxsfb_pdata.default_bpp = 32;
+	mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
 }
 
 static void __init cfa10037_init(void)
 {
 	enable_clk_enet_out();
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
-
-	mxsfb_pdata.mode_list = cfa10049_video_modes;
-	mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
-	mxsfb_pdata.default_bpp = 32;
-	mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
 }
 
 static void __init apf28_init(void)
@@ -423,6 +421,8 @@ static void __init apf28_init(void)
 	mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes);
 	mxsfb_pdata.default_bpp = 16;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT;
+	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+				MXSFB_SYNC_DOTCLK_FAILING_ACT;
 }
 
 static void __init mxs_machine_init(void)
diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c
index a4294aa9f30..e63b7d87acb 100644
--- a/arch/arm/mach-mxs/mm.c
+++ b/arch/arm/mach-mxs/mm.c
@@ -18,6 +18,7 @@
 
 #include <mach/mx23.h>
 #include <mach/mx28.h>
+#include <mach/common.h>
 
 /*
  * Define the MX23 memory map.
diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c
index 54add60f94c..1dff4670375 100644
--- a/arch/arm/mach-mxs/ocotp.c
+++ b/arch/arm/mach-mxs/ocotp.c
@@ -19,6 +19,7 @@
 #include <asm/processor.h>	/* for cpu_relax() */
 
 #include <mach/mxs.h>
+#include <mach/common.h>
 
 #define OCOTP_WORD_OFFSET		0x20
 #define OCOTP_WORD_COUNT		0x20
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index cb7c6ae2e3f..6c4f766365a 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -543,15 +543,6 @@ static struct clk usb_dc_ck = {
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= USB_REQ_EN_SHIFT,
-};
-
-static struct clk usb_dc_ck7xx = {
-	.name		= "usb_dc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= SOFT_USB_OTG_DPLL_REQ_SHIFT,
 };
 
@@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck7xx,	CK_7XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX | CK_7XX),
 	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
 	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index fb18831e88a..14f7e992047 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -31,6 +31,8 @@
 
 #include <plat/i2c.h>
 
+#include <mach/irqs.h>
+
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 void omap7xx_map_io(void);
 #else
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 49ac3dfebef..8111cd9ff3e 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -311,9 +311,6 @@ config MACH_OMAP_ZOOM2
 	default y
 	select OMAP_PACKAGE_CBB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SERIAL_8250
-	select SERIAL_8250_CONSOLE
-	select SERIAL_CORE_CONSOLE
 
 config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
@@ -321,9 +318,6 @@ config MACH_OMAP_ZOOM3
 	default y
 	select OMAP_PACKAGE_CBP
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SERIAL_8250
-	select SERIAL_8250_CONSOLE
-	select SERIAL_CORE_CONSOLE
 
 config MACH_CM_T35
 	bool "CompuLab CM-T35/CM-T3730 modules"
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 0274ff7a2a2..e54a4806019 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -102,6 +102,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
+	.init_late	= omap3_init_late,
 	.init_time	= omap3_sync32k_timer_init,
 	.dt_compat	= omap3_boards_compat,
 	.restart	= omap3xxx_restart,
@@ -119,6 +120,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
+	.init_late	= omap3_init_late,
 	.init_time	= omap3_secure_sync32k_timer_init,
 	.dt_compat	= omap3_gp_boards_compat,
 	.restart	= omap3xxx_restart,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index f7c4616cbb6..d2ea68ea678 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/usb/phy.h>
 #include <linux/usb/musb.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
@@ -98,6 +99,7 @@ static void __init rx51_init(void)
 	sdrc_params = nokia_get_sdram_timings();
 	omap_sdrc_init(sdrc_params, sdrc_params);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(&musb_board_data);
 	rx51_peripherals_init();
 
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 3d58f335f17..0c6834ae1fc 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -52,6 +52,13 @@
  */
 #define OMAP4_DPLL_ABE_DEFFREQ				98304000
 
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ				960000000
+
 /* Root clocks */
 
 DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
@@ -1011,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
 		    OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
 		    hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
 
+DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
+		OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+		OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
+
 DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
 		OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
 		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
@@ -1538,6 +1549,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"per_mcbsp4_gfclk",			&per_mcbsp4_gfclk,	CK_443X),
 	CLK(NULL,	"hsmmc1_fclk",			&hsmmc1_fclk,	CK_443X),
 	CLK(NULL,	"hsmmc2_fclk",			&hsmmc2_fclk,	CK_443X),
+	CLK(NULL,	"ocp2scp_usb_phy_phy_48m",	&ocp2scp_usb_phy_phy_48m,	CK_443X),
 	CLK(NULL,	"sha2md5_fck",			&sha2md5_fck,	CK_443X),
 	CLK(NULL,	"slimbus1_fclk_1",		&slimbus1_fclk_1,	CK_443X),
 	CLK(NULL,	"slimbus1_fclk_0",		&slimbus1_fclk_0,	CK_443X),
@@ -1705,5 +1717,13 @@ int __init omap4xxx_clk_init(void)
 	if (rc)
 		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
+	/*
+	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+	 * domain can transition to retention state when not in use.
+	 */
+	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 0a6b9c7a63d..d6ba13e1c54 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -108,7 +108,6 @@ void omap35xx_init_late(void);
 void omap3630_init_late(void);
 void am35xx_init_late(void);
 void ti81xx_init_late(void);
-void omap4430_init_late(void);
 int omap2_common_pm_late_init(void);
 
 #if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
@@ -294,5 +293,8 @@ extern void omap_reserve(void);
 struct omap_hwmod;
 extern int omap_dss_reset(struct omap_hwmod *);
 
+/* SoC specific clock initializer */
+extern int (*omap_clk_init)(void);
+
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index e4b16c8efe8..410e1bac781 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1122,9 +1122,6 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
 	/* TODO: remove, see function definition */
 	gpmc_convert_ps_to_ns(gpmc_t);
 
-	/* Now the GPMC is initialised, unreserve the chip-selects */
-	gpmc_cs_map = 0;
-
 	return 0;
 }
 
@@ -1383,6 +1380,9 @@ static int gpmc_probe(struct platform_device *pdev)
 	if (IS_ERR_VALUE(gpmc_setup_irq()))
 		dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
 
+	/* Now the GPMC is initialised, unreserve the chip-selects */
+	gpmc_cs_map = 0;
+
 	rc = gpmc_probe_dt(pdev);
 	if (rc < 0) {
 		clk_disable_unprepare(gpmc_l3_clk);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2c3fdd65387..5c445ca1e27 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -55,6 +55,12 @@
 #include "prm44xx.h"
 
 /*
+ * omap_clk_init: points to a function that does the SoC-specific
+ * clock initializations
+ */
+int (*omap_clk_init)(void);
+
+/*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
  */
@@ -397,7 +403,7 @@ void __init omap2420_init_early(void)
 	omap242x_clockdomains_init();
 	omap2420_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap2420_clk_init();
+	omap_clk_init = omap2420_clk_init;
 }
 
 void __init omap2420_init_late(void)
@@ -427,7 +433,7 @@ void __init omap2430_init_early(void)
 	omap243x_clockdomains_init();
 	omap2430_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap2430_clk_init();
+	omap_clk_init = omap2430_clk_init;
 }
 
 void __init omap2430_init_late(void)
@@ -462,7 +468,7 @@ void __init omap3_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap3xxx_clk_init();
+	omap_clk_init = omap3xxx_clk_init;
 }
 
 void __init omap3430_init_early(void)
@@ -500,7 +506,7 @@ void __init ti81xx_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap3xxx_clk_init();
+	omap_clk_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
@@ -568,7 +574,7 @@ void __init am33xx_init_early(void)
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	am33xx_clk_init();
+	omap_clk_init = am33xx_clk_init;
 }
 #endif
 
@@ -593,7 +599,7 @@ void __init omap4430_init_early(void)
 	omap44xx_clockdomains_init();
 	omap44xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap4xxx_clk_init();
+	omap_clk_init = omap4xxx_clk_init;
 }
 
 void __init omap4430_init_late(void)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 6a217c98db5..f82cf878d6a 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -211,8 +211,6 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
 		return -EINVAL;
 	}
 
-	pr_err("%s: Could not find signal %s\n", __func__, muxname);
-
 	return -ENODEV;
 }
 
@@ -234,6 +232,8 @@ int __init omap_mux_get_by_name(const char *muxname,
 		return mux_mode;
 	}
 
+	pr_err("%s: Could not find signal %s\n", __func__, muxname);
+
 	return -ENODEV;
 }
 
@@ -739,8 +739,9 @@ static void __init omap_mux_dbg_create_entry(
 	list_for_each_entry(e, &partition->muxmodes, node) {
 		struct omap_mux *m = &e->mux;
 
-		(void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir,
-					  m, &omap_mux_dbg_signal_fops);
+		(void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO,
+					  mux_dbg_dir, m,
+					  &omap_mux_dbg_signal_fops);
 	}
 }
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index c2c798c08c2..a202a478510 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1368,7 +1368,9 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	}
 
 	if (sf & SYSC_HAS_MIDLEMODE) {
-		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+		if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		} else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
 			idlemode = HWMOD_IDLEMODE_NO;
 		} else {
 			if (sf & SYSC_HAS_ENAWAKEUP)
@@ -1440,7 +1442,8 @@ static void _idle_sysc(struct omap_hwmod *oh)
 	}
 
 	if (sf & SYSC_HAS_MIDLEMODE) {
-		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+		if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
+		    (oh->flags & HWMOD_FORCE_MSTANDBY)) {
 			idlemode = HWMOD_IDLEMODE_FORCE;
 		} else {
 			if (sf & SYSC_HAS_ENAWAKEUP)
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index d43d9b608ed..d5dc935f606 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm {
  *
  * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
  *     of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- *     of standby, rather than relying on module smart-standby
+ * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
+ *     out of standby, rather than relying on module smart-standby
  * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
  *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
  *     XXX Should be HWMOD_SETUP_NO_RESET
@@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm {
  *     correctly, or this is being abused to deal with some PM latency
  *     issues -- but we're currently suffering from a shortage of
  *     folks who are able to track these issues down properly.
+ * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
+ *     is kept in force-standby mode. Failing to do so causes PM problems
+ *     with musb on OMAP3630 at least. Note that musb has a dedicated register
+ *     to control MSTANDBY signal when MIDLEMODE is set to force-standby.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_16BIT_REG				(1 << 8)
 #define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
 #define HWMOD_BLOCK_WFI				(1 << 10)
+#define HWMOD_FORCE_MSTANDBY			(1 << 11)
 
 /*
  * omap_hwmod._int_flags definitions
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index ac7e03ec952..5112d04e7b7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
 	 * Erratum ID: i479  idle_req / idle_ack mechanism potentially
 	 * broken when autoidle is enabled
 	 * workaround is to disable the autoidle bit at module level.
+	 *
+	 * Enabling the device in any other MIDLEMODE setting but force-idle
+	 * causes core_pwrdm not enter idle states at least on OMAP3630.
+	 * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
+	 * signal when MIDLEMODE is set to force-idle.
 	 */
 	.flags		= HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
-				| HWMOD_SWSUP_MSTANDBY,
+				| HWMOD_FORCE_MSTANDBY,
 };
 
 /* usb_otg_hs */
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 0e47d2e1687..9e0576569e0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2714,6 +2714,10 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
 	{ }
 };
 
+static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
+	{ .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" },
+};
+
 /* ocp2scp_usb_phy */
 static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 	.name		= "ocp2scp_usb_phy",
@@ -2728,6 +2732,8 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 		},
 	},
 	.dev_attr	= ocp2scp_dev_attr,
+	.opt_clks	= ocp2scp_usb_phy_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
 };
 
 /*
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 2bdd4cf17a8..f62b509ed08 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -547,6 +547,8 @@ static inline void __init realtime_counter_init(void)
 			       clksrc_nr, clksrc_src)			\
 void __init omap##name##_gptimer_timer_init(void)			\
 {									\
+	if (omap_clk_init)						\
+		omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);	\
@@ -556,6 +558,8 @@ void __init omap##name##_gptimer_timer_init(void)			\
 				clksrc_nr, clksrc_src)			\
 void __init omap##name##_sync32k_timer_init(void)		\
 {									\
+	if (omap_clk_init)						\
+		omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	/* Enable the use of clocksource="gp_timer" kernel parameter */	\
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index af41888acbd..969b0ba7fa7 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -505,6 +505,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = {
 	.pin			= GPIO_ONE_WIRE,
 	.is_open_drain		= 0,
 	.enable_external_pullup	= w1_enable_external_pullup,
+	.ext_pullup_enable_pin	= -EINVAL,
 };
 
 struct platform_device raumfeld_w1_gpio_device = {
diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h
index b7a9f4d469e..1e73f5fa865 100644
--- a/arch/arm/mach-s3c24xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h
@@ -188,10 +188,8 @@
 
 #if defined(CONFIG_CPU_S3C2416)
 #define NR_IRQS (IRQ_S3C2416_I2S1 + 1)
-#elif defined(CONFIG_CPU_S3C2443)
-#define NR_IRQS (IRQ_S3C2443_AC97+1)
 #else
-#define NR_IRQS (IRQ_S3C2440_AC97+1)
+#define NR_IRQS (IRQ_S3C2443_AC97 + 1)
 #endif
 
 /* compatibility define. */
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index cb9f5e011e7..d8ba9bee4c7 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -500,7 +500,7 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
 		base = (void *)0xfd000000;
 
 		intc->reg_mask = base + 0xa4;
-		intc->reg_pending = base + 0x08;
+		intc->reg_pending = base + 0xa8;
 		irq_num = 20;
 		irq_start = S3C2410_IRQ(32);
 		irq_offset = 4;
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index fcdf52dbcc4..f051f53e35b 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -214,11 +214,6 @@ static struct clk clk_pcmcdclk2 = {
 	.name		= "pcmcdclk",
 };
 
-static struct clk dummy_apb_pclk = {
-	.name		= "apb_pclk",
-	.id		= -1,
-};
-
 static struct clk *clkset_vpllsrc_list[] = {
 	[0] = &clk_fin_vpll,
 	[1] = &clk_sclk_hdmi27m,
@@ -305,18 +300,6 @@ static struct clk_ops clk_fout_apll_ops = {
 
 static struct clk init_clocks_off[] = {
 	{
-		.name		= "dma",
-		.devname	= "dma-pl330.0",
-		.parent		= &clk_hclk_psys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330.1",
-		.parent		= &clk_hclk_psys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
 		.name		= "rot",
 		.parent		= &clk_hclk_dsys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
@@ -573,6 +556,20 @@ static struct clk clk_hsmmc3 = {
 	.ctrlbit	= (1<<19),
 };
 
+static struct clk clk_pdma0 = {
+	.name		= "pdma0",
+	.parent		= &clk_hclk_psys.clk,
+	.enable		= s5pv210_clk_ip0_ctrl,
+	.ctrlbit	= (1 << 3),
+};
+
+static struct clk clk_pdma1 = {
+	.name		= "pdma1",
+	.parent		= &clk_hclk_psys.clk,
+	.enable		= s5pv210_clk_ip0_ctrl,
+	.ctrlbit	= (1 << 4),
+};
+
 static struct clk *clkset_uart_list[] = {
 	[6] = &clk_mout_mpll.clk,
 	[7] = &clk_mout_epll.clk,
@@ -1075,6 +1072,8 @@ static struct clk *clk_cdev[] = {
 	&clk_hsmmc1,
 	&clk_hsmmc2,
 	&clk_hsmmc3,
+	&clk_pdma0,
+	&clk_pdma1,
 };
 
 /* Clock initialisation code */
@@ -1333,6 +1332,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
 	CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
 	CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
+	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
 };
 
 void __init s5pv210_register_clocks(void)
@@ -1361,6 +1362,5 @@ void __init s5pv210_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
 		s3c_disable_clocks(clk_cdev[ptr], 1);
 
-	s3c24xx_register_clock(&dummy_apb_pclk);
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 3a38f7b34b9..e373de44a8b 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -845,7 +845,7 @@ static struct fimc_source_info goni_camera_sensors[] = {
 		.mux_id		= 0,
 		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
 				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.bus_type	= FIMC_BUS_TYPE_ITU_601,
+		.fimc_bus_type	= FIMC_BUS_TYPE_ITU_601,
 		.board_info	= &noon010pc30_board_info,
 		.i2c_bus_num	= 0,
 		.clk_frequency	= 16000000UL,
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index cdcb799e802..fec49ebc359 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -32,6 +32,7 @@
 #include <linux/smsc911x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/sh_hspi.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/usb/otg.h>
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index f9d754f90c5..d2b3937c401 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -14,7 +14,7 @@
 #define pr_fmt(fmt) "SPEAr3xx: " fmt
 
 #include <linux/amba/pl022.h>
-#include <linux/amba/pl08x.h>
+#include <linux/amba/pl080.h>
 #include <linux/io.h>
 #include <plat/pl080.h>
 #include <mach/generic.h>
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 051b62c2710..7f2cb6c5e2c 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -81,7 +81,6 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
 #endif
 
 struct mmci_platform_data mop500_sdi0_data = {
-	.ios_handler	= mop500_sdi0_ios_handler,
 	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA |
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index b03457881c4..87d2d7b38ce 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-nomadik.h>
@@ -439,6 +440,15 @@ static void mop500_prox_deactivate(struct device *dev)
 	regulator_put(prox_regulator);
 }
 
+void mop500_snowball_ethernet_clock_enable(void)
+{
+	struct clk *clk;
+
+	clk = clk_get_sys("fsmc", NULL);
+	if (!IS_ERR(clk))
+		clk_prepare_enable(clk);
+}
+
 static struct cryp_platform_data u8500_cryp1_platform_data = {
 		.mem_to_engine = {
 				.dir = STEDMA40_MEM_TO_PERIPH,
@@ -683,6 +693,8 @@ static void __init snowball_init_machine(void)
 	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
+	mop500_snowball_ethernet_clock_enable();
+
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index eaa605f5d90..d38951be70d 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -104,6 +104,7 @@ void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
 void mop500_audio_init(struct device *parent);
+void mop500_snowball_ethernet_clock_enable(void);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 19235cf7bbe..f1a58184437 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -312,9 +312,10 @@ static void __init u8500_init_machine(void)
 	/* Pinmaps must be in place before devices register */
 	if (of_machine_is_compatible("st-ericsson,mop500"))
 		mop500_pinmaps_init();
-	else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+	else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
 		snowball_pinmaps_init();
-	else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+		mop500_snowball_ethernet_clock_enable();
+	} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
 		hrefv60_pinmaps_init();
 	else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
 		/* TODO: Add pinmaps for ccu9540 board. */
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index c2f37390308..c465faca51b 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -299,7 +299,7 @@ static void l2x0_unlock(u32 cache_id)
 	int lockregs;
 	int i;
 
-	switch (cache_id) {
+	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
 	case L2X0_CACHE_ID_PART_L310:
 		lockregs = 8;
 		break;
@@ -333,15 +333,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	if (cache_id_part_number_from_dt)
 		cache_id = cache_id_part_number_from_dt;
 	else
-		cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID)
-			& L2X0_CACHE_ID_PART_MASK;
+		cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
 	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
 
 	aux &= aux_mask;
 	aux |= aux_val;
 
 	/* Determine the number of ways */
-	switch (cache_id) {
+	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
 	case L2X0_CACHE_ID_PART_L310:
 		if (aux & (1 << 16))
 			ways = 16;
@@ -725,7 +724,6 @@ static const struct l2x0_of_data pl310_data = {
 		.flush_all   = l2x0_flush_all,
 		.inv_all     = l2x0_inv_all,
 		.disable     = l2x0_disable,
-		.set_debug   = pl310_set_debug,
 	},
 };
 
@@ -814,9 +812,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 		data->save();
 
 	of_init = true;
-	l2x0_init(l2x0_base, aux_val, aux_mask);
-
 	memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache));
+	l2x0_init(l2x0_base, aux_val, aux_mask);
 
 	return 0;
 }
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index a5a4b2bc42b..2ac37372ef5 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -48,7 +48,7 @@ static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
 static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION);
 static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS);
 
-static DEFINE_PER_CPU(atomic64_t, active_asids);
+DEFINE_PER_CPU(atomic64_t, active_asids);
 static DEFINE_PER_CPU(u64, reserved_asids);
 static cpumask_t tlb_flush_pending;
 
@@ -215,6 +215,7 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
 	if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
 		local_flush_bp_all();
 		local_flush_tlb_all();
+		dummy_flush_tlb_a15_erratum();
 	}
 
 	atomic64_set(&per_cpu(active_asids, cpu), asid);
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c7e3759f16d..e9db6b4bf65 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -342,6 +342,7 @@ static int __init atomic_pool_init(void)
 {
 	struct dma_pool *pool = &atomic_pool;
 	pgprot_t prot = pgprot_dmacoherent(pgprot_kernel);
+	gfp_t gfp = GFP_KERNEL | GFP_DMA;
 	unsigned long nr_pages = pool->size >> PAGE_SHIFT;
 	unsigned long *bitmap;
 	struct page *page;
@@ -361,8 +362,8 @@ static int __init atomic_pool_init(void)
 		ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
 					      atomic_pool_init);
 	else
-		ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
-					   &page, atomic_pool_init);
+		ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page,
+					   atomic_pool_init);
 	if (ptr) {
 		int i;
 
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e95a996ab78..78978945492 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -598,39 +598,60 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 }
 
-static void __init alloc_init_section(pud_t *pud, unsigned long addr,
-				      unsigned long end, phys_addr_t phys,
-				      const struct mem_type *type)
+static void __init map_init_section(pmd_t *pmd, unsigned long addr,
+			unsigned long end, phys_addr_t phys,
+			const struct mem_type *type)
 {
-	pmd_t *pmd = pmd_offset(pud, addr);
-
+#ifndef CONFIG_ARM_LPAE
 	/*
-	 * Try a section mapping - end, addr and phys must all be aligned
-	 * to a section boundary.  Note that PMDs refer to the individual
-	 * L1 entries, whereas PGDs refer to a group of L1 entries making
-	 * up one logical pointer to an L2 table.
+	 * In classic MMU format, puds and pmds are folded in to
+	 * the pgds. pmd_offset gives the PGD entry. PGDs refer to a
+	 * group of L1 entries making up one logical pointer to
+	 * an L2 table (2MB), where as PMDs refer to the individual
+	 * L1 entries (1MB). Hence increment to get the correct
+	 * offset for odd 1MB sections.
+	 * (See arch/arm/include/asm/pgtable-2level.h)
 	 */
-	if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) {
-		pmd_t *p = pmd;
-
-#ifndef CONFIG_ARM_LPAE
-		if (addr & SECTION_SIZE)
-			pmd++;
+	if (addr & SECTION_SIZE)
+		pmd++;
 #endif
+	do {
+		*pmd = __pmd(phys | type->prot_sect);
+		phys += SECTION_SIZE;
+	} while (pmd++, addr += SECTION_SIZE, addr != end);
 
-		do {
-			*pmd = __pmd(phys | type->prot_sect);
-			phys += SECTION_SIZE;
-		} while (pmd++, addr += SECTION_SIZE, addr != end);
+	flush_pmd_entry(pmd);
+}
 
-		flush_pmd_entry(p);
-	} else {
+static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
+				      unsigned long end, phys_addr_t phys,
+				      const struct mem_type *type)
+{
+	pmd_t *pmd = pmd_offset(pud, addr);
+	unsigned long next;
+
+	do {
 		/*
-		 * No need to loop; pte's aren't interested in the
-		 * individual L1 entries.
+		 * With LPAE, we must loop over to map
+		 * all the pmds for the given range.
 		 */
-		alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
-	}
+		next = pmd_addr_end(addr, end);
+
+		/*
+		 * Try a section mapping - addr, next and phys must all be
+		 * aligned to a section boundary.
+		 */
+		if (type->prot_sect &&
+				((addr | next | phys) & ~SECTION_MASK) == 0) {
+			map_init_section(pmd, addr, next, phys, type);
+		} else {
+			alloc_init_pte(pmd, addr, next,
+						__phys_to_pfn(phys), type);
+		}
+
+		phys += next - addr;
+
+	} while (pmd++, addr = next, addr != end);
 }
 
 static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
@@ -641,7 +662,7 @@ static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
 
 	do {
 		next = pud_addr_end(addr, end);
-		alloc_init_section(pud, addr, next, phys, type);
+		alloc_init_pmd(pud, addr, next, phys, type);
 		phys += next - addr;
 	} while (pud++, addr = next, addr != end);
 }
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 3a3c015f8d5..f584d3f5b37 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -420,7 +420,7 @@ __v7_pj4b_proc_info:
 __v7_ca7mp_proc_info:
 	.long	0x410fc070
 	.long	0xff0ffff0
-	__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+	__v7_proc __v7_ca7mp_setup
 	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
 
 	/*
@@ -430,10 +430,25 @@ __v7_ca7mp_proc_info:
 __v7_ca15mp_proc_info:
 	.long	0x410fc0f0
 	.long	0xff0ffff0
-	__v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV
+	__v7_proc __v7_ca15mp_setup
 	.size	__v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
 
 	/*
+	 * Qualcomm Inc. Krait processors.
+	 */
+	.type	__krait_proc_info, #object
+__krait_proc_info:
+	.long	0x510f0400		@ Required ID value
+	.long	0xff0ffc00		@ Mask for ID
+	/*
+	 * Some Krait processors don't indicate support for SDIV and UDIV
+	 * instructions in the ARM instruction set, even though they actually
+	 * do support them.
+	 */
+	__v7_proc __v7_setup, hwcaps = HWCAP_IDIV
+	.size	__krait_proc_info, . - __krait_proc_info
+
+	/*
 	 * Match any ARMv7 processor core.
 	 */
 	.type	__v7_proc_info, #object
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 6828ef6ce80..a0bd8a755bd 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -576,7 +576,7 @@ load_ind:
 			/* x = ((*(frame + k)) & 0xf) << 2; */
 			ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL;
 			/* the interpreter should deal with the negative K */
-			if (k < 0)
+			if ((int)k < 0)
 				return -1;
 			/* offset in r1: we might have to take the slow path */
 			emit_mov_i(r_off, k, ctx);
diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c
index febe3862873..807ac8e5cbc 100644
--- a/arch/arm/plat-orion/addr-map.c
+++ b/arch/arm/plat-orion/addr-map.c
@@ -157,9 +157,12 @@ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
 		u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
 
 		/*
-		 * Chip select enabled?
+		 * We only take care of entries for which the chip
+		 * select is enabled, and that don't have high base
+		 * address bits set (devices can only access the first
+		 * 32 bits of the memory).
 		 */
-		if (size & 1) {
+		if ((size & 1) && !(base & 0xF)) {
 			struct mbus_dram_window *w;
 
 			w = &orion_mbus_dram_info.cs[cs++];
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 739d016eb27..8a08c31b5e2 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -10,7 +10,7 @@ choice
 
 config ARCH_SPEAR13XX
 	bool "ST SPEAr13xx with Device Tree"
-	select ARCH_HAVE_CPUFREQ
+	select ARCH_HAS_CPUFREQ
 	select ARM_GIC
 	select CPU_V7
 	select GPIO_SPEAR_SPICS