Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "This is a largeish batch of fixes, mostly because I missed -rc2 due to
  travel/vacation.  So in number these are a bit more than ideal unless
  you amortize them over two -rcs.

  Quick breakdown:
   - Defconfig updates
     - Making multi_v7_defconfig useful on more hardware to encourage
       single-image usage
     - Davinci and nomadik updates due to new code merged this merge
       window
   - Fixes for UART on Samsung platforms, both PM and clock-related
   - A handful of warning fixes from defconfig builds, including for
     max8925 backlight and pxamci (both with appropriate acks)
   - Exynos5440 fixes for LPAE configuration, PM
   - ...plus a bunch of other smaller changes all over the place

  I expect to switch to regressions-or-severe-bugs-only fixes from here
  on out"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
  mfd: max8925: fix dt code for backlight
  ARM: omap5: Only select errata 798181 if SMP
  ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos
  ARM: EXYNOS: Fix low level debug support
  ARM: SAMSUNG: Save/restore only selected uart's registers
  ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm
  ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART
  ARM: multi_v7_defconfig: Select USB chipidea driver
  ARM: pxa: propagate errors from regulator_enable() to pxamci
  ARM: zynq: fix compilation warning
  ARM: keystone: fix compilation warning
  ARM: highbank: Only touch common coherency control register fields
  ARM: footbridge: fix overlapping PCI mappings
  dmaengine: shdma: fix a build failure on platforms with no DMA support
  ARM: STi: Set correct ARM ERRATAs.
  ARM: dts: STi: Fix pinconf setup for STiH416 serial2
  ARM: nomadik: configure for NO_HZ and HRTIMERS
  ARM: nomadik: update defconfig base
  ARM: nomadik: Update MMC defconfigs
  ARM: davinci: defconfig: enable EDMA driver
  ...

50 files changed, 268 insertions, 165 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ba412e02ec0..37c0f4e978d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1600,8 +1600,7 @@ config LOCAL_TIMERS
 config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 512 if SOC_OMAP5
-	default 512 if ARCH_KEYSTONE
+	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5
 	default 392 if ARCH_U8500
 	default 352 if ARCH_VT8500
 	default 288 if ARCH_SUNXI
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 43bf3c796cb..0e7fed47bd8 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -147,7 +147,7 @@
 					reg = <0x0a>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
-
+					clocks = <&saif0>;
 				};
 
 				pcf8563: rtc@51 {
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 1f0d38d7b16..e035f4664b9 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -195,7 +195,7 @@
 					reg = <0x0a>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
-
+					clocks = <&saif0>;
 				};
 
 				at24@51 {
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 880df2f13be..44d9da57736 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -184,7 +184,7 @@
 					reg = <0x0a>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
-
+					clocks = <&saif0>;
 				};
 
 				eeprom: eeprom@51 {
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 6a8acb01b1d..9524a057128 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -837,6 +837,7 @@
 				compatible = "fsl,imx28-saif";
 				reg = <0x80042000 0x2000>;
 				interrupts = <59 80>;
+				#clock-cells = <0>;
 				clocks = <&clks 53>;
 				dmas = <&dma_apbx 4>;
 				dma-names = "rx-tx";
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 6dd9486c755..ad3471ca17c 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -61,6 +61,16 @@
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
 	};
+
+	clocks {
+		clk_26M: codec_clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+			gpios = <&gpio4 26 1>;
+		};
+	};
 };
 
 &esdhc1 {
@@ -229,6 +239,7 @@
 				MX51_PAD_EIM_A27__GPIO2_21   0x5
 				MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
 				MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
+				MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
 			>;
 		};
 	};
@@ -255,7 +266,7 @@
 	sgtl5000: codec@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clock-frequency = <26000000>;
+		clocks = <&clk_26M>;
 		VDDA-supply = <&vdig_reg>;
 		VDDIO-supply = <&vvideo_reg>;
 	};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index aaa33bc99f7..a6309026794 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -27,7 +27,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000 0 0>;
+		pwms = <&pwm2 0 50000>;
 		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
 		default-brightness-level = <10>;
 		enable-gpios = <&gpio7 7 0>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 3895fbba8fc..569aa9f2c4e 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -725,15 +725,15 @@
 				uart1 {
 					pinctrl_uart1_1: uart1grp-1 {
 						fsl,pins = <
-							MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5
-							MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5
+							MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
+							MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
 						>;
 					};
 
 					pinctrl_uart1_2: uart1grp-2 {
 						fsl,pins = <
-							MX53_PAD_PATA_DIOW__UART1_TXD_MUX  0x1c5
-							MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5
+							MX53_PAD_PATA_DIOW__UART1_TXD_MUX  0x1e4
+							MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
 						>;
 					};
 
@@ -748,8 +748,8 @@
 				uart2 {
 					pinctrl_uart2_1: uart2grp-1 {
 						fsl,pins = <
-							MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
-							MX53_PAD_PATA_DMARQ__UART2_TXD_MUX     0x1c5
+							MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+							MX53_PAD_PATA_DMARQ__UART2_TXD_MUX     0x1e4
 						>;
 					};
 
@@ -766,17 +766,17 @@
 				uart3 {
 					pinctrl_uart3_1: uart3grp-1 {
 						fsl,pins = <
-							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
-							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
-							MX53_PAD_PATA_DA_1__UART3_CTS	  0x1c5
-							MX53_PAD_PATA_DA_2__UART3_RTS	  0x1c5
+							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+							MX53_PAD_PATA_DA_1__UART3_CTS	  0x1e4
+							MX53_PAD_PATA_DA_2__UART3_RTS	  0x1e4
 						>;
 					};
 
 					pinctrl_uart3_2: uart3grp-2 {
 						fsl,pins = <
-							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
-							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
+							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
 						>;
 					};
 
@@ -785,8 +785,8 @@
 				uart4 {
 					pinctrl_uart4_1: uart4grp-1 {
 						fsl,pins = <
-							MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5
-							MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5
+							MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
+							MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
 						>;
 					};
 				};
@@ -794,8 +794,8 @@
 				uart5 {
 					pinctrl_uart5_1: uart5grp-1 {
 						fsl,pins = <
-							MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5
-							MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5
+							MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4
+							MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4
 						>;
 					};
 				};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index 957b21a71b4..0f246c97926 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -166,6 +166,15 @@
 				reg		= <0x9000 0x100>;
 				st,bank-name	= "PIO31";
 			};
+
+			serial2-oe {
+				pinctrl_serial2_oe: serial2-1 {
+					st,pins {
+						output-enable	= <&PIO11 3 ALT2 OUT>;
+					};
+				};
+			};
+
 		};
 
 		pin-controller-rear {
@@ -218,7 +227,6 @@
 					st,pins {
 						tx	= <&PIO17 4 ALT2 OUT>;
 						rx	= <&PIO17 5 ALT2 IN>;
-						output-enable	= <&PIO11 3 ALT2 OUT>;
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 3cecd9689a4..1a0326ea7d0 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -79,7 +79,7 @@
 			interrupts	= <0 197 0>;
 			clocks          = <&CLK_S_ICN_REG_0>;
 			pinctrl-names 	= "default";
-			pinctrl-0 	= <&pinctrl_serial2>;
+			pinctrl-0 	= <&pinctrl_serial2 &pinctrl_serial2_oe>;
 		};
 
 		/* SBC_UART1 */
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index b3034da00a3..ae6a17aed9e 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -47,6 +47,12 @@
 		regulator-max-microvolt = <3150000>;
 	};
 
+	vmmc2: regulator-vmmc2 {
+		compatible = "ti,twl4030-vmmc2";
+		regulator-min-microvolt = <1850000>;
+		regulator-max-microvolt = <3150000>;
+	};
+
 	vusb1v5: regulator-vusb1v5 {
 		compatible = "ti,twl4030-vusb1v5";
 	};
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index e1eb7dadda8..67d929cf980 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -442,8 +442,8 @@
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;
 				interrupts = <0 78 0x04>;
-				clocks = <&clks VF610_CLK_ENET>,
-					<&clks VF610_CLK_ENET>,
+				clocks = <&clks VF610_CLK_ENET0>,
+					<&clks VF610_CLK_ENET0>,
 					<&clks VF610_CLK_ENET>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
@@ -453,8 +453,8 @@
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d1000 0x1000>;
 				interrupts = <0 79 0x04>;
-				clocks = <&clks VF610_CLK_ENET>,
-					<&clks VF610_CLK_ENET>,
+				clocks = <&clks VF610_CLK_ENET1>,
+					<&clks VF610_CLK_ENET1>,
 					<&clks VF610_CLK_ENET>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index a432e6c1dac..39ad030ac0c 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -26,7 +26,6 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/edma.h>
-#include <linux/err.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_dma.h>
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index 7c868139bdb..1571bea48be 100644
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -102,6 +102,8 @@ CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_XFS_FS=m
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index c86fd75e181..ab2f7378352 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -162,6 +162,8 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_XFS_FS=m
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index fe0bdc361d2..6e572c64cf5 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -53,6 +53,7 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OMAP_OCP2SCP=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI_PLATFORM=y
@@ -61,6 +62,7 @@ CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_KS8851=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
 CONFIG_MDIO_SUN4I=y
@@ -89,6 +91,7 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_SIRF=y
 CONFIG_I2C_TEGRA=y
 CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_SIRF=y
 CONFIG_SPI_TEGRA114=y
@@ -111,11 +114,12 @@ CONFIG_FB_SIMPLE=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_ISP1760_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_AB8500_USB=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_OMAP_USB2=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 35f8cf299fa..263ae3869e3 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -1,6 +1,8 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -48,7 +50,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_TESTS=m
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND_ECC_SMC=y
 CONFIG_MTD_NAND=y
@@ -94,8 +95,10 @@ CONFIG_I2C_GPIO=y
 CONFIG_I2C_NOMADIK=y
 CONFIG_DEBUG_GPIO=y
 # CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
 CONFIG_MMC=y
-CONFIG_MMC_CLKGATE=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index afbc439f11d..4cdb61c5445 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -505,7 +505,7 @@ static struct vpbe_output dm365evm_vpbe_outputs[] = {
 /*
  * Amplifiers on the board
  */
-struct ths7303_platform_data ths7303_pdata = {
+static struct ths7303_platform_data ths7303_pdata = {
 	.ch_1 = 3,
 	.ch_2 = 3,
 	.ch_3 = 3,
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 42ef53f62c6..86100d17969 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -860,7 +860,7 @@ static struct platform_device dm355_vpbe_display = {
 	},
 };
 
-struct venc_platform_data dm355_venc_pdata = {
+static struct venc_platform_data dm355_venc_pdata = {
 	.setup_pinmux	= dm355_vpbe_setup_pinmux,
 	.setup_clock	= dm355_venc_setup_clock,
 };
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index fa7af5eda52..dad28029ba9 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1349,7 +1349,7 @@ static struct platform_device dm365_vpbe_display = {
 	},
 };
 
-struct venc_platform_data dm365_venc_pdata = {
+static struct venc_platform_data dm365_venc_pdata = {
 	.setup_pinmux	= dm365_vpbe_setup_pinmux,
 	.setup_clock	= dm365_venc_setup_clock,
 };
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 855d4a7b462..5952e68c76c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -92,6 +92,7 @@ config SOC_EXYNOS5440
 	bool "SAMSUNG EXYNOS5440"
 	default y
 	depends on ARCH_EXYNOS5
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_HAS_OPP
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index e970a7a4e27..53696154aea 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -14,7 +14,7 @@ obj-				:=
 
 obj-$(CONFIG_ARCH_EXYNOS)	+= common.o
 
-obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_S5P_PM)		+= pm.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 164685bd25c..ba95e5db250 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -58,7 +58,6 @@ static const char name_exynos5440[] = "EXYNOS5440";
 
 static void exynos4_map_io(void);
 static void exynos5_map_io(void);
-static void exynos5440_map_io(void);
 static int exynos_init(void);
 
 static struct cpu_table cpu_ids[] __initdata = {
@@ -95,7 +94,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 	}, {
 		.idcode		= EXYNOS5440_SOC_ID,
 		.idmask		= EXYNOS5_SOC_MASK,
-		.map_io		= exynos5440_map_io,
 		.init		= exynos_init,
 		.name		= name_exynos5440,
 	},
@@ -150,11 +148,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S5P_VA_CMU,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
 		.length		= SZ_128K,
@@ -268,20 +261,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_PMU),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos5440_iodesc0[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(EXYNOS5440_PA_UART0),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
 	},
 };
 
@@ -388,11 +367,6 @@ static void __init exynos5_map_io(void)
 		iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
 }
 
-static void __init exynos5440_map_io(void)
-{
-	iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
-}
-
 void __init exynos_init_time(void)
 {
 	of_clk_init(NULL);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 3e156bcddcb..972490fc09d 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -97,6 +97,5 @@ struct exynos_pmu_conf {
 };
 
 extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
-extern void s3c_cpu_resume(void);
 
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 17a18ff3d71..225ee8431c7 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -25,6 +25,7 @@
 #include <mach/regs-pmu.h>
 
 #include <plat/cpu.h>
+#include <plat/pm.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h
index 374ef2cf715..2a4cdb7cb32 100644
--- a/arch/arm/mach-exynos/include/mach/memory.h
+++ b/arch/arm/mach-exynos/include/mach/memory.h
@@ -15,8 +15,13 @@
 
 #define PLAT_PHYS_OFFSET		UL(0x40000000)
 
+#ifndef CONFIG_ARM_LPAE
 /* Maximum of 256MiB in one bank */
 #define MAX_PHYSMEM_BITS	32
 #define SECTION_SIZE_BITS	28
+#else
+#define MAX_PHYSMEM_BITS	36
+#define SECTION_SIZE_BITS	31
+#endif
 
 #endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 41c20692a13..c679db57726 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -217,6 +217,9 @@ static __init int exynos_pm_drvinit(void)
 	struct clk *pll_base;
 	unsigned int tmp;
 
+	if (soc_is_exynos5440())
+		return 0;
+
 	s3c_pm_init();
 
 	/* All wakeup disable */
@@ -340,6 +343,9 @@ static struct syscore_ops exynos_pm_syscore_ops = {
 
 static __init int exynos_pm_syscore_init(void)
 {
+	if (soc_is_exynos5440())
+		return 0;
+
 	register_syscore_ops(&exynos_pm_syscore_ops);
 	return 0;
 }
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index a7cd2cf5e08..3490a24f969 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -276,8 +276,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 
 	sys->mem_offset  = DC21285_PCI_MEM;
 
-	pci_ioremap_io(0, DC21285_PCI_IO);
-
 	pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
 
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index dc5d6becd8c..88815795fe2 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -115,6 +115,7 @@ static int highbank_platform_notifier(struct notifier_block *nb,
 {
 	struct resource *res;
 	int reg = -1;
+	u32 val;
 	struct device *dev = __dev;
 
 	if (event != BUS_NOTIFY_ADD_DEVICE)
@@ -141,10 +142,10 @@ static int highbank_platform_notifier(struct notifier_block *nb,
 		return NOTIFY_DONE;
 
 	if (of_property_read_bool(dev->of_node, "dma-coherent")) {
-		writel(0xff31, sregs_base + reg);
+		val = readl(sregs_base + reg);
+		writel(val | 0xff01, sregs_base + reg);
 		set_dma_ops(dev, &arm_coherent_dma_ops);
-	} else
-		writel(0, sregs_base + reg);
+	}
 
 	return NOTIFY_OK;
 }
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 4282e99f5ca..86567d980b0 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -199,7 +199,8 @@ static const char *pcie_axi_sels[]	= { "axi", "ahb", };
 static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
 static const char *usdhc_sels[]	= { "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *enfc_sels[]	= { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
-static const char *emi_sels[]		= { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *emi_sels[]		= { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
+static const char *emi_slow_sels[]      = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *vdo_axi_sels[]	= { "axi", "ahb", };
 static const char *vpu_axi_sels[]	= { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
@@ -392,7 +393,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[usdhc4_sel]       = imx_clk_mux("usdhc4_sel",       base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
 	clk[enfc_sel]         = imx_clk_mux("enfc_sel",         base + 0x2c, 16, 2, enfc_sels,         ARRAY_SIZE(enfc_sels));
 	clk[emi_sel]          = imx_clk_mux("emi_sel",          base + 0x1c, 27, 2, emi_sels,          ARRAY_SIZE(emi_sels));
-	clk[emi_slow_sel]     = imx_clk_mux("emi_slow_sel",     base + 0x1c, 29, 2, emi_sels,          ARRAY_SIZE(emi_sels));
+	clk[emi_slow_sel]     = imx_clk_mux("emi_slow_sel",     base + 0x1c, 29, 2, emi_slow_sels,     ARRAY_SIZE(emi_slow_sels));
 	clk[vdo_axi_sel]      = imx_clk_mux("vdo_axi_sel",      base + 0x18, 11, 1, vdo_axi_sels,      ARRAY_SIZE(vdo_axi_sels));
 	clk[vpu_axi_sel]      = imx_clk_mux("vpu_axi_sel",      base + 0x18, 14, 2, vpu_axi_sels,      ARRAY_SIZE(vpu_axi_sels));
 	clk[cko1_sel]         = imx_clk_mux("cko1_sel",         base + 0x60, 0,  4, cko1_sels,         ARRAY_SIZE(cko1_sels));
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index d617c0b7c80..b169a396d93 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -183,6 +183,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
 	clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
 	clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23);
+	clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0));
+	clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1));
 
 	clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7));
 
diff --git a/arch/arm/mach-imx/mx27.h b/arch/arm/mach-imx/mx27.h
index e074616d54c..8a65f192e7f 100644
--- a/arch/arm/mach-imx/mx27.h
+++ b/arch/arm/mach-imx/mx27.h
@@ -135,7 +135,7 @@
 #define MX27_INT_GPT4		(NR_IRQS_LEGACY + 4)
 #define MX27_INT_RTIC		(NR_IRQS_LEGACY + 5)
 #define MX27_INT_CSPI3		(NR_IRQS_LEGACY + 6)
-#define MX27_INT_SDHC		(NR_IRQS_LEGACY + 7)
+#define MX27_INT_MSHC		(NR_IRQS_LEGACY + 7)
 #define MX27_INT_GPIO		(NR_IRQS_LEGACY + 8)
 #define MX27_INT_SDHC3		(NR_IRQS_LEGACY + 9)
 #define MX27_INT_SDHC2		(NR_IRQS_LEGACY + 10)
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index fe4d9ff93a7..b661c5c2870 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -49,7 +49,7 @@ static const char *keystone_match[] __initconst = {
 	NULL,
 };
 
-void keystone_restart(char mode, const char *cmd)
+void keystone_restart(enum reboot_mode mode, const char *cmd)
 {
 	u32 val;
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 627fa7e41fb..3eed0006d18 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -62,7 +62,7 @@ config SOC_OMAP5
 	select HAVE_SMP
 	select COMMON_CLK
 	select HAVE_ARM_ARCH_TIMER
-	select ARM_ERRATA_798181
+	select ARM_ERRATA_798181 if SMP
 
 config SOC_AM33XX
 	bool "AM33XX support"
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index e5fbfed69aa..be5d005ebad 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,6 +15,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
+#include <linux/clk.h>
 
 #include <asm/mach/arch.h>
 
@@ -35,6 +36,21 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
 	{ }
 };
 
+/*
+ * Create alias for USB host PHY clock.
+ * Remove this when clock phandle can be provided via DT
+ */
+static void __init legacy_init_ehci_clk(char *clkname)
+{
+	int ret;
+
+	ret = clk_add_alias("main_clk", NULL, clkname, NULL);
+	if (ret) {
+		pr_err("%s:Failed to add main_clk alias to %s :%d\n",
+						__func__, clkname, ret);
+	}
+}
+
 static void __init omap_generic_init(void)
 {
 	omap_sdrc_init(NULL, NULL);
@@ -45,10 +61,15 @@ static void __init omap_generic_init(void)
 	 * HACK: call display setup code for selected boards to enable omapdss.
 	 * This will be removed when omapdss supports DT.
 	 */
-	if (of_machine_is_compatible("ti,omap4-panda"))
+	if (of_machine_is_compatible("ti,omap4-panda")) {
 		omap4_panda_display_init_of();
+		legacy_init_ehci_clk("auxclk3_ck");
+
+	}
 	else if (of_machine_is_compatible("ti,omap4-sdp"))
 		omap_4430sdp_display_init_of();
+	else if (of_machine_is_compatible("ti,omap5-uevm"))
+		legacy_init_ehci_clk("auxclk1_ck");
 }
 
 #ifdef CONFIG_SOC_OMAP2420
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index f6726bb4eb9..3a3362fa793 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -477,16 +477,24 @@ static int em_x270_usb_hub_init(void)
 	/* USB Hub power-on and reset */
 	gpio_direction_output(usb_hub_reset, 1);
 	gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
-	regulator_enable(em_x270_usb_ldo);
+	err = regulator_enable(em_x270_usb_ldo);
+	if (err)
+		goto err_free_rst_gpio;
+
 	gpio_set_value(usb_hub_reset, 0);
 	gpio_set_value(usb_hub_reset, 1);
 	regulator_disable(em_x270_usb_ldo);
-	regulator_enable(em_x270_usb_ldo);
+	err = regulator_enable(em_x270_usb_ldo);
+	if (err)
+		goto err_free_rst_gpio;
+
 	gpio_set_value(usb_hub_reset, 0);
 	gpio_set_value(GPIO9_USB_VBUS_EN, 1);
 
 	return 0;
 
+err_free_rst_gpio:
+	gpio_free(usb_hub_reset);
 err_free_vbus_gpio:
 	gpio_free(GPIO9_USB_VBUS_EN);
 err_free_usb_ldo:
@@ -592,7 +600,7 @@ err_irq:
 	return err;
 }
 
-static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
+static int em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
@@ -600,10 +608,11 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 		int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
 
 		regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
-		regulator_enable(em_x270_sdio_ldo);
+		return regulator_enable(em_x270_sdio_ldo);
 	} else {
 		regulator_disable(em_x270_sdio_ldo);
 	}
+	return 0;
 }
 
 static void em_x270_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d2c65231837..dd70343c870 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -408,7 +408,7 @@ static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_in
 	return err;
 }
 
-static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
+static int mainstone_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
@@ -420,6 +420,7 @@ static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
 		printk(KERN_DEBUG "%s: off\n", __func__);
 		MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
 	}
+	return 0;
 }
 
 static void mainstone_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index fb7f1d1627d..13e5b00eae9 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -335,7 +335,7 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 	return err;
 }
 
-static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
+static int pcm990_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data *p_d = dev->platform_data;
 	u8 val;
@@ -348,6 +348,7 @@ static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
 		val &= ~PCM990_CTRL_MMC2PWR;
 
 	pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
+	return 0;
 }
 
 static void pcm990_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 711d37e26bd..aedf053a1de 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -258,7 +258,7 @@ err_free_2:
 	return err;
 }
 
-static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
+static int poodle_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
@@ -270,6 +270,8 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
 		gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
 		gpio_set_value(POODLE_GPIO_SD_PWR, 0);
 	}
+
+	return 0;
 }
 
 static void poodle_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 2125df0444e..4c29173026e 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -598,7 +598,7 @@ static inline void spitz_spi_init(void) {}
  * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
  * give the card a chance to fully insert/eject.
  */
-static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
+static int spitz_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
@@ -606,6 +606,8 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
 	else
 		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
+
+	return 0;
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 88fde43c948..62aea3e835f 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -734,9 +734,10 @@ static int stargate2_mci_init(struct device *dev,
  *
  * Very simple control. Either it is on or off and is controlled by
  * a gpio pin */
-static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+static int stargate2_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+	return 0;
 }
 
 static void stargate2_mci_exit(struct device *dev, void *data)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
index 34fffdf6fc1..564553694b5 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -119,66 +119,101 @@ static struct clk init_clocks_off[] = {
 	}
 };
 
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_USBD,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2410-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2410-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2410-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART2,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= 0,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus,
-	}, {
-		.name		= "usb-bus-gadget",
-		.parent		= &clk_usb_bus,
-	},
+static struct clk clk_lcd = {
+	.name		= "lcd",
+	.parent		= &clk_h,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_LCDC,
+};
+
+static struct clk clk_gpio = {
+	.name		= "gpio",
+	.parent		= &clk_p,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_GPIO,
+};
+
+static struct clk clk_usb_host = {
+	.name		= "usb-host",
+	.parent		= &clk_h,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_USBH,
+};
+
+static struct clk clk_usb_device = {
+	.name		= "usb-device",
+	.parent		= &clk_h,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_USBD,
+};
+
+static struct clk clk_timers = {
+	.name		= "timers",
+	.parent		= &clk_p,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_PWMT,
+};
+
+struct clk s3c24xx_clk_uart0 = {
+	.name		= "uart",
+	.devname	= "s3c2410-uart.0",
+	.parent		= &clk_p,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_UART0,
+};
+
+struct clk s3c24xx_clk_uart1 = {
+	.name		= "uart",
+	.devname	= "s3c2410-uart.1",
+	.parent		= &clk_p,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_UART1,
+};
+
+struct clk s3c24xx_clk_uart2 = {
+	.name		= "uart",
+	.devname	= "s3c2410-uart.2",
+	.parent		= &clk_p,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_UART2,
+};
+
+static struct clk clk_rtc = {
+	.name		= "rtc",
+	.parent		= &clk_p,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_RTC,
+};
+
+static struct clk clk_watchdog = {
+	.name		= "watchdog",
+	.parent		= &clk_p,
+	.ctrlbit	= 0,
+};
+
+static struct clk clk_usb_bus_host = {
+	.name		= "usb-bus-host",
+	.parent		= &clk_usb_bus,
+};
+
+static struct clk clk_usb_bus_gadget = {
+	.name		= "usb-bus-gadget",
+	.parent		= &clk_usb_bus,
+};
+
+static struct clk *init_clocks[] = {
+	&clk_lcd,
+	&clk_gpio,
+	&clk_usb_host,
+	&clk_usb_device,
+	&clk_timers,
+	&s3c24xx_clk_uart0,
+	&s3c24xx_clk_uart1,
+	&s3c24xx_clk_uart2,
+	&clk_rtc,
+	&clk_watchdog,
+	&clk_usb_bus_host,
+	&clk_usb_bus_gadget,
 };
 
 /* s3c2410_baseclk_add()
@@ -195,7 +230,6 @@ int __init s3c2410_baseclk_add(void)
 {
 	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
 	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *clkp;
 	struct clk *xtal;
 	int ret;
 	int ptr;
@@ -207,8 +241,9 @@ int __init s3c2410_baseclk_add(void)
 
 	/* register clocks from clock array */
 
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
+		struct clk *clkp = init_clocks[ptr];
+
 		/* ensure that we note the clock state */
 
 		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
index 1069b568082..aaf006d1d6d 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c
@@ -166,6 +166,9 @@ static struct clk_lookup s3c2440_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
 	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
+	CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
+	CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
+	CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
 	CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
 };
 
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index d04e3bfe191..835833e3c4f 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -11,8 +11,9 @@ menuconfig ARCH_STI
 	select HAVE_SMP
 	select HAVE_ARM_SCU if SMP
 	select ARCH_REQUIRE_GPIOLIB
-	select ARM_ERRATA_720789
 	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369
+	select ARM_ERRATA_775420
 	select PL310_ERRATA_753970 if CACHE_PL310
 	select PL310_ERRATA_769419 if CACHE_PL310
 	help
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 5b799c29886..5f252569c68 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -91,7 +91,7 @@ static void __init zynq_map_io(void)
 	zynq_scu_map_io();
 }
 
-static void zynq_system_reset(char mode, const char *cmd)
+static void zynq_system_reset(enum reboot_mode mode, const char *cmd)
 {
 	zynq_slcr_system_reset();
 }
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 3dc5cbea86c..a5b5ff6e68d 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -29,6 +29,13 @@ config PLAT_S5P
 	help
 	  Base platform code for Samsung's S5P series SoC.
 
+config SAMSUNG_PM
+	bool
+	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || S5P_PM)
+	default y
+	help
+	  Base platform power management code for samsung code
+
 if PLAT_SAMSUNG
 
 # boot configurations
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 98d07d8fc7a..199bbe304d0 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -51,7 +51,7 @@ obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
 
 # PM support
 
-obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_SAMSUNG_PM)	+= pm.o
 obj-$(CONFIG_SAMSUNG_PM_GPIO)	+= pm-gpio.o
 obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
 
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index a62753dc15b..df45d6edc98 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -83,6 +83,11 @@ extern struct clk clk_ext;
 extern struct clksrc_clk clk_epllref;
 extern struct clksrc_clk clk_esysclk;
 
+/* S3C24XX UART clocks */
+extern struct clk s3c24xx_clk_uart0;
+extern struct clk s3c24xx_clk_uart1;
+extern struct clk s3c24xx_clk_uart2;
+
 /* S3C64XX specific clocks */
 extern struct clk clk_h2;
 extern struct clk clk_27m;
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 5d47ca35cab..6bc1a8f471e 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -19,7 +19,7 @@
 
 struct device;
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_SAMSUNG_PM
 
 extern __init int s3c_pm_init(void);
 extern __init int s3c64xx_pm_init(void);
@@ -58,8 +58,6 @@ extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
 
 /* from sleep.S */
 
-extern void s3c_cpu_resume(void);
-
 extern int s3c2410_cpu_suspend(unsigned long);
 
 /* sleep save info */
@@ -106,12 +104,14 @@ extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
 extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
 extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_SAMSUNG_PM
 extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
 extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
+extern void s3c_cpu_resume(void);
 #else
 #define s3c_irq_wake NULL
 #define s3c_irqext_wake NULL
+#define s3c_cpu_resume NULL
 #endif
 
 /* PM debug functions */
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index ea361364245..d0c23010b69 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -80,7 +80,7 @@ unsigned char pm_uart_udivslot;
 
 #ifdef CONFIG_SAMSUNG_PM_DEBUG
 
-static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+static struct pm_uart_save uart_save;
 
 static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 {
@@ -101,11 +101,7 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 
 static void s3c_pm_save_uarts(void)
 {
-	struct pm_uart_save *save = uart_save;
-	unsigned int uart;
-
-	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
-		s3c_pm_save_uart(uart, save);
+	s3c_pm_save_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
 }
 
 static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
@@ -126,11 +122,7 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
 
 static void s3c_pm_restore_uarts(void)
 {
-	struct pm_uart_save *save = uart_save;
-	unsigned int uart;
-
-	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
-		s3c_pm_restore_uart(uart, save);
+	s3c_pm_restore_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
 }
 #else
 static void s3c_pm_save_uarts(void) { }