Merge tag 'omapdss-for-3.7' of git://gitorious.org/linux-omap-dss2/linux into fbdev-next

Omapdss driver changes for the 3.7 merge window.

Notable changes:

* Basic writeback support for DISPC level. Writeback is not yet usable, though,
  as we need higher level code to actually expose the writeback feature to
  userspace.
* Rewriting the omapdss output drivers. We're trying to remove the hard links
  between the omapdss and the panels, and this rewrite work moves us closer to
  that goal.
* Cleanup and restructuring patches that have been made while working on device
  tree support for omapdss. Device tree support is still some way ahead, but
  these patches are good cleanups in themselves.
* Basic OMAP5 DSS support for DPI and DSI outputs.
* Workaround for the problem that GFX overlay's fifo is too small for high
  resolution scenarios, causing underflows.
* Cleanups that remove dependencies to omap platform code.

48 files changed, 171 insertions, 193 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6d6e18fee9f..c5f9ae5dbd1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2144,6 +2144,7 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_IMX
 	tristate "CPUfreq driver for i.MX CPUs"
 	depends on ARCH_MXC && CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 59509c48d7e..bd0cff3f808 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -154,5 +154,10 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
+
+		wdt2: wdt@44e35000 {
+			compatible = "ti,omap3-wdt";
+			ti,hwmods = "wd_timer2";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index cd86177a3ea..59d9789e550 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -25,8 +25,8 @@
 		aips@70000000 { /* aips-1 */
 			spba@70000000 {
 				esdhc@70004000 { /* ESDHC1 */
-					fsl,cd-internal;
-					fsl,wp-internal;
+					fsl,cd-controller;
+					fsl,wp-controller;
 					status = "okay";
 				};
 
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 52d94704510..f8ca6fa8819 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -41,9 +41,13 @@
 		};
 		power-blue {
 			label = "power:blue";
-			gpios = <&gpio1 11 0>;
+			gpios = <&gpio1 10 0>;
 			linux,default-trigger = "timer";
 		};
+		power-red {
+			label = "power:red";
+			gpios = <&gpio1 11 0>;
+		};
 		usb1 {
 			label = "usb1:blue";
 			gpios = <&gpio1 12 0>;
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 3b2f3510d7e..d351b27d721 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -66,6 +66,7 @@
 
 	vcxio: regulator@8 {
 		compatible = "ti,twl6030-vcxio";
+		regulator-always-on;
 	};
 
 	vusb: regulator@9 {
@@ -74,10 +75,12 @@
 
 	v1v8: regulator@10 {
 		compatible = "ti,twl6030-v1v8";
+		regulator-always-on;
 	};
 
 	v2v1: regulator@11 {
 		compatible = "ti,twl6030-v2v1";
+		regulator-always-on;
 	};
 
 	clk32kg: regulator@12 {
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 2d4f661d1cf..da6845493ca 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
 CONFIG_RTC_DRV_PL031=y
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 4db5de54b6a..6321567d8ea 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -102,7 +102,8 @@ void __init dove_ehci1_init(void)
 void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE,
-			IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR);
+			IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR,
+			1600);
 }
 
 /*****************************************************************************
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 4e245f1b29a..5ec563be6c6 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -42,6 +42,7 @@
 #include <plat/backlight.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
+#include <plat/hdmi.h>
 
 #include <mach/ohci.h>
 #include <mach/map.h>
@@ -734,6 +735,11 @@ static void __init origen_bt_setup(void)
 	s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
 }
 
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
 static void s5p_tv_setup(void)
 {
 	/* Direct HPD to HDMI chip */
@@ -781,6 +787,7 @@ static void __init origen_machine_init(void)
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
+	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
 
 #ifdef CONFIG_DRM_EXYNOS
 	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index b1c50dabd86..208aa6236af 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -40,6 +40,7 @@
 #include <plat/mfc.h>
 #include <plat/ehci.h>
 #include <plat/clock.h>
+#include <plat/hdmi.h>
 
 #include <mach/map.h>
 #include <mach/ohci.h>
@@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = {
 	.pwm_period_ns  = 1000,
 };
 
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
 static void s5p_tv_setup(void)
 {
 	/* direct HPD to HDMI chip */
@@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void)
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
+	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
 
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 07f7c226e4c..d004d37ad9d 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
 obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+imx5-pm-$(CONFIG_PM) += pm-imx5.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o
@@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-obj-$(CONFIG_CPU_V7) += head-v7.o
-AFLAGS_head-v7.o :=-Wa,-march=armv7-a
-obj-$(CONFIG_SMP) += platsmp.o
+AFLAGS_headsmp.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 
 ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
 endif
 
 # i.MX5 based machines
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index ea89520b6e2..4233d9e3531 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -152,7 +152,7 @@ enum mx6q_clks {
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
-	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2,
+	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	clk_max
 };
 
@@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void)
 	clk[gpu3d_shader]     = imx_clk_divider("gpu3d_shader",     "gpu3d_shader_sel",  base + 0x18, 29, 3);
 	clk[ipu1_podf]        = imx_clk_divider("ipu1_podf",        "ipu1_sel",          base + 0x3c, 11, 3);
 	clk[ipu2_podf]        = imx_clk_divider("ipu2_podf",        "ipu2_sel",          base + 0x3c, 16, 3);
-	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_sel",       base + 0x20, 10, 1);
-	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_sel",       base + 0x20, 11, 1);
+	clk[ldb_di0_div_3_5]  = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_div_3_5",       base + 0x20, 10, 1);
+	clk[ldb_di1_div_3_5]  = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_div_3_5",   base + 0x20, 11, 1);
 	clk[ipu1_di0_pre]     = imx_clk_divider("ipu1_di0_pre",     "ipu1_di0_pre_sel",  base + 0x34, 3,  3);
 	clk[ipu1_di1_pre]     = imx_clk_divider("ipu1_di1_pre",     "ipu1_di1_pre_sel",  base + 0x34, 12, 3);
 	clk[ipu2_di0_pre]     = imx_clk_divider("ipu2_di0_pre",     "ipu2_di0_pre_sel",  base + 0x38, 3,  3);
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S
index 7e49deb128a..7e49deb128a 100644
--- a/arch/arm/mach-imx/head-v7.S
+++ b/arch/arm/mach-imx/headsmp.S
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 20ed2d56c1a..f8f7437c83b 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void)
 	  : "cc");
 }
 
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-		"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
-	cpu_do_idle();
-	cpu_leave_lowpower();
 
-	/* We should never return from idle */
-	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+	/* spin here until hardware takes it down */
+	while (1)
+		;
 }
 
 int platform_cpu_disable(unsigned int cpu)
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 5ec0608f2a7..045b3f6a387 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -71,7 +71,7 @@ soft:
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB)) {
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		/* min rx data delay */
 		phy_write(phydev, 0x0b, 0x8105);
 		phy_write(phydev, 0x0c, 0x0000);
@@ -112,7 +112,7 @@ put_clk:
 
 static void __init imx6q_sabrelite_init(void)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB))
+	if (IS_BUILTIN(CONFIG_PHYLIB))
 		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 				ksz9021rn_phy_fixup);
 	imx6q_sabrelite_cko1_setup();
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index a5717558ee8..a13299d758e 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
 dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
 dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
 dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
-dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-qnap-ts219.dtb
+dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6281.dtb
+dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
 dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
 dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c4b64adcbfc..3226077735b 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
-			IRQ_KIRKWOOD_GE00_ERR);
+			IRQ_KIRKWOOD_GE00_ERR, 1600);
 	/* The interface forgets the MAC address assigned by u-boot if
 	the clock is turned off, so claim the clk now. */
 	clk_prepare_enable(ge0);
@@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
-			IRQ_KIRKWOOD_GE01_ERR);
+			IRQ_KIRKWOOD_GE01_ERR, 1600);
 	clk_prepare_enable(ge1);
 }
 
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
index 4304f951937..7e8a5a2e1ec 100644
--- a/arch/arm/mach-mmp/sram.c
+++ b/arch/arm/mach-mmp/sram.c
@@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret = 0;
 
-	if (!pdata && !pdata->pool_name)
+	if (!pdata || !pdata->pool_name)
 		return -ENODEV;
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index 62b53d710ef..a9bc84180d2 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -37,7 +37,7 @@
 #define WIN0_OFF(n)		(BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
 #define WIN8_OFF(n)		(BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
 
-static void __init __iomem *win_cfg_base(int win)
+static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
 {
 	/*
 	 * Find the control register base address for this window.
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index b4c53b846c9..3057f7d4329 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
-			IRQ_MV78XX0_GE_ERR);
+			IRQ_MV78XX0_GE_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
@@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-			NO_IRQ);
+			NO_IRQ,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index dd2db025f77..fcd4e85c4dd 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -62,13 +62,14 @@ config ARCH_OMAP4
 	select PM_OPP if PM
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARM_CPU_SUSPEND if PM
-	select ARCH_NEEDS_CPU_IDLE_COUPLED
+	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 
 config SOC_OMAP5
 	bool "TI OMAP5"
 	select CPU_V7
 	select ARM_GIC
 	select HAVE_SMP
+	select ARM_CPU_SUSPEND if PM
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index ad8a7d94afc..c165e20506c 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -601,29 +601,6 @@ static void __init omap_sfh7741prox_init(void)
 			__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
 }
 
-static struct gpio sdp4430_hdmi_gpios[] = {
-	{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
-	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH,	"hdmi_gpio_ls_oe" },
-	{ HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
-};
-
-static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
-{
-	int status;
-
-	status = gpio_request_array(sdp4430_hdmi_gpios,
-				    ARRAY_SIZE(sdp4430_hdmi_gpios));
-	if (status)
-		pr_err("%s: Cannot request HDMI GPIOs\n", __func__);
-
-	return status;
-}
-
-static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
-{
-	gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios));
-}
-
 static struct nokia_dsi_panel_data dsi1_panel = {
 		.name		= "taal",
 		.reset_gpio	= 102,
@@ -644,29 +621,6 @@ static struct omap_dss_device sdp4430_lcd_device = {
 	.phy.dsi		= {
 		.module		= 0,
 	},
-
-	.clocks = {
-		.dispc = {
-			.channel = {
-				/* Logic Clock = 172.8 MHz */
-				.lck_div	= 1,
-				/* Pixel Clock = 34.56 MHz */
-				.pck_div	= 5,
-				.lcd_clk_src	= OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
-			},
-			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
-		},
-
-		.dsi = {
-			.regn		= 16,	/* Fint = 2.4 MHz */
-			.regm		= 180,	/* DDR Clock = 216 MHz */
-			.regm_dispc	= 5,	/* PLL1_CLK1 = 172.8 MHz */
-			.regm_dsi	= 5,	/* PLL1_CLK2 = 172.8 MHz */
-
-			.lp_clk_div	= 10,	/* LP Clock = 8.64 MHz */
-			.dsi_fclk_src	= OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,
-		},
-	},
 	.channel		= OMAP_DSS_CHANNEL_LCD,
 };
 
@@ -691,33 +645,12 @@ static struct omap_dss_device sdp4430_lcd2_device = {
 
 		.module		= 1,
 	},
-
-	.clocks = {
-		.dispc = {
-			.channel = {
-				/* Logic Clock = 172.8 MHz */
-				.lck_div	= 1,
-				/* Pixel Clock = 34.56 MHz */
-				.pck_div	= 5,
-				.lcd_clk_src	= OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,
-			},
-			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
-		},
-
-		.dsi = {
-			.regn		= 16,	/* Fint = 2.4 MHz */
-			.regm		= 180,	/* DDR Clock = 216 MHz */
-			.regm_dispc	= 5,	/* PLL1_CLK1 = 172.8 MHz */
-			.regm_dsi	= 5,	/* PLL1_CLK2 = 172.8 MHz */
-
-			.lp_clk_div	= 10,	/* LP Clock = 8.64 MHz */
-			.dsi_fclk_src	= OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,
-		},
-	},
 	.channel		= OMAP_DSS_CHANNEL_LCD2,
 };
 
 static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
+	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
+	.ls_oe_gpio = HDMI_GPIO_LS_OE,
 	.hpd_gpio = HDMI_GPIO_HPD,
 };
 
@@ -725,8 +658,6 @@ static struct omap_dss_device sdp4430_hdmi_device = {
 	.name = "hdmi",
 	.driver_name = "hdmi_panel",
 	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.platform_enable = sdp4430_panel_enable_hdmi,
-	.platform_disable = sdp4430_panel_disable_hdmi,
 	.channel = OMAP_DSS_CHANNEL_DIGIT,
 	.data = &sdp4430_hdmi_data,
 };
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 74915295482..28214483aab 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
+	OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #endif
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index ef230a0eb5e..0d362e9f9cb 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -58,6 +58,7 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 
+#define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
 #define OMAP3_EVM_EHCI_SELECT	61
 
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 70f6d1d2546..cd4852e5ca5 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -408,30 +408,9 @@ static struct omap_dss_device omap4_panda_dvi_device = {
 	.channel		= OMAP_DSS_CHANNEL_LCD2,
 };
 
-static struct gpio panda_hdmi_gpios[] = {
-	{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
-	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
-	{ HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
-};
-
-static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
-{
-	int status;
-
-	status = gpio_request_array(panda_hdmi_gpios,
-				    ARRAY_SIZE(panda_hdmi_gpios));
-	if (status)
-		pr_err("Cannot request HDMI GPIOs\n");
-
-	return status;
-}
-
-static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
-{
-	gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios));
-}
-
 static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
+	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
+	.ls_oe_gpio = HDMI_GPIO_LS_OE,
 	.hpd_gpio = HDMI_GPIO_HPD,
 };
 
@@ -439,8 +418,6 @@ static struct omap_dss_device  omap4_panda_hdmi_device = {
 	.name = "hdmi",
 	.driver_name = "hdmi_panel",
 	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.platform_enable = omap4_panda_panel_enable_hdmi,
-	.platform_disable = omap4_panda_panel_disable_hdmi,
 	.channel = OMAP_DSS_CHANNEL_DIGIT,
 	.data = &omap4_panda_hdmi_data,
 };
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 14734746457..c1875862679 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 };
 
-/*
- * ADS7846 driver maybe request a gpio according to the value
- * of pdata->get_pendown_state, but we have done this. So set
- * get_pendown_state to avoid twice gpio requesting.
- */
-static int omap3_get_pendown_state(void)
-{
-	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
-}
-
 static struct ads7846_platform_data ads7846_config = {
 	.x_max			= 0x0fff,
 	.y_max			= 0x0fff,
@@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = {
 	.debounce_rep		= 1,
 	.gpio_pendown		= -EINVAL,
 	.keep_vref_on		= 1,
-	.get_pendown_state	= &omap3_get_pendown_state,
 };
 
 static struct spi_board_info ads7846_spi_board_info __initdata = {
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index 4c4ef6a6166..a0b4a42836a 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -4,7 +4,6 @@
 #include "twl-common.h"
 
 #define NAND_BLOCK_SIZE	SZ_128K
-#define OMAP3_EVM_TS_GPIO	175
 
 struct mtd_partition;
 struct ads7846_platform_data;
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index ee05e193fc6..288bee6cbb7 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -238,8 +238,9 @@ int __init omap4_idle_init(void)
 	for_each_cpu(cpu_id, cpu_online_mask) {
 		dev = &per_cpu(omap4_idle_dev, cpu_id);
 		dev->cpu = cpu_id;
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
 		dev->coupled_cpus = *cpu_online_mask;
-
+#endif
 		cpuidle_register_driver(&omap4_idle_driver);
 
 		if (cpuidle_register_device(dev)) {
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index af1ed7d24a1..ee40739b55c 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -95,7 +95,6 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
 	{ "dss_core", "omapdss_dss", -1 },
 	{ "dss_dispc", "omapdss_dispc", -1 },
 	{ "dss_rfbi", "omapdss_rfbi", -1 },
-	{ "dss_venc", "omapdss_venc", -1 },
 	{ "dss_dsi1", "omapdss_dsi", 0 },
 	{ "dss_dsi2", "omapdss_dsi", 1 },
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 471e62a74a1..76f9b3c2f58 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -127,7 +127,6 @@ struct omap_mux_partition {
  * @gpio:	GPIO number
  * @muxnames:	available signal modes for a ball
  * @balls:	available balls on the package
- * @partition:	mux partition
  */
 struct omap_mux {
 	u16	reg_offset;
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index 2293ba27101..c95415da23c 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -94,7 +94,7 @@ int __init omap4_opp_init(void)
 {
 	int r = -ENODEV;
 
-	if (!cpu_is_omap44xx())
+	if (!cpu_is_omap443x())
 		return r;
 
 	r = omap_init_opp_table(omap44xx_opp_def_list,
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index e4fc88c65db..05bd8f02723 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -272,21 +272,16 @@ void omap_sram_idle(void)
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
 
-	if (mpu_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(mpu_pwrdm);
-		pwrdm_pre_transition(neon_pwrdm);
-	}
+	pwrdm_pre_transition(NULL);
 
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(per_pwrdm);
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
 		omap2_gpio_prepare_for_idle(per_going_off);
 	}
 
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(core_pwrdm);
 		if (core_next_state == PWRDM_POWER_OFF) {
 			omap3_core_save_context();
 			omap3_cm_save_context();
@@ -339,20 +334,14 @@ void omap_sram_idle(void)
 			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
 					       OMAP3430_GR_MOD,
 					       OMAP3_PRM_VOLTCTRL_OFFSET);
-		pwrdm_post_transition(core_pwrdm);
 	}
 	omap3_intc_resume_idle();
 
+	pwrdm_post_transition(NULL);
+
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON) {
+	if (per_next_state < PWRDM_POWER_ON)
 		omap2_gpio_resume_after_idle();
-		pwrdm_post_transition(per_pwrdm);
-	}
-
-	if (mpu_next_state < PWRDM_POWER_ON) {
-		pwrdm_post_transition(mpu_pwrdm);
-		pwrdm_post_transition(neon_pwrdm);
-	}
 }
 
 static void omap3_pm_idle(void)
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 9f6b83d1b19..91e71d8f46f 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -56,9 +56,13 @@ ppa_por_params:
  * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
  * It returns to the caller for CPU INACTIVE and ON power states or in case
  * CPU failed to transition to targeted OFF/DORMANT state.
+ *
+ * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save
+ * stack frame and it expects the caller to take care of it. Hence the entire
+ * stack frame is saved to avoid possible stack corruption.
  */
 ENTRY(omap4_finish_suspend)
-	stmfd	sp!, {lr}
+	stmfd	sp!, {r4-r12, lr}
 	cmp	r0, #0x0
 	beq	do_WFI				@ No lowpower state, jump to WFI
 
@@ -226,7 +230,7 @@ scu_gp_clear:
 skip_scu_gp_clear:
 	isb
 	dsb
-	ldmfd	sp!, {pc}
+	ldmfd	sp!, {r4-r12, pc}
 ENDPROC(omap4_finish_suspend)
 
 /*
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index de47f170ba5..9bf8a89e78c 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
 			   struct twl4030_platform_data *pmic_data)
 {
+	omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
 	strncpy(pmic_i2c_board_info.type, pmic_type,
 		sizeof(pmic_i2c_board_info.type));
 	pmic_i2c_board_info.irq = pmic_irq;
@@ -257,6 +258,10 @@ static struct twl4030_usb_data omap4_usb_pdata = {
 	.phy_suspend	= omap4430_phy_suspend,
 };
 
+static struct regulator_consumer_supply omap4_vdda_hdmi_dac_supplies[] = {
+	REGULATOR_SUPPLY("vdda_hdmi_dac", "omapdss_hdmi"),
+};
+
 static struct regulator_init_data omap4_vdac_idata = {
 	.constraints = {
 		.min_uV			= 1800000,
@@ -266,6 +271,8 @@ static struct regulator_init_data omap4_vdac_idata = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(omap4_vdda_hdmi_dac_supplies),
+	.consumer_supplies	= omap4_vdda_hdmi_dac_supplies,
 	.supply_regulator	= "V2V1",
 };
 
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 9148b229d0d..410291c6766 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
-			IRQ_ORION5X_ETH_ERR);
+			IRQ_ORION5X_ETH_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index 454831b6603..ee99fd56c04 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -24,7 +24,8 @@
 */
 
 enum dma_ch {
-	DMACH_XD0,
+	DMACH_DT_PROP = -1,	/* not yet supported, do not use */
+	DMACH_XD0 = 0,
 	DMACH_XD1,
 	DMACH_SDI,
 	DMACH_SPI0,
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index c013bbf79ca..53d3d46dec1 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -41,7 +41,6 @@ config MACH_HREFV60
 config MACH_SNOWBALL
 	bool "U8500 Snowball platform"
 	select MACH_MOP500
-	select LEDS_GPIO
 	help
 	  Include support for the snowball development platform.
 
diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c
index 99604803874..df15646036a 100644
--- a/arch/arm/mach-ux500/board-mop500-msp.c
+++ b/arch/arm/mach-ux500/board-mop500-msp.c
@@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent,
 	return pdev;
 }
 
-/* Platform device for ASoC U8500 machine */
-static struct platform_device snd_soc_u8500 = {
-		.name = "snd-soc-u8500",
+/* Platform device for ASoC MOP500 machine */
+static struct platform_device snd_soc_mop500 = {
+		.name = "snd-soc-mop500",
 		.id = 0,
 		.dev = {
 			.platform_data = NULL,
@@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent)
 {
 	struct platform_device *msp1;
 
-	pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
-	platform_device_register(&snd_soc_u8500);
+	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
+	platform_device_register(&snd_soc_mop500);
 
 	pr_info("Initialize MSP I2S-devices.\n");
 	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 8674a890fd1..a534d8880de 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -797,6 +797,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		mop500_sdi_init(parent);
+		mop500_msp_init(parent);
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
 		i2c_register_board_info(2, mop500_i2c2_devices,
@@ -804,6 +805,8 @@ static void __init u8500_init_machine(void)
 
 		mop500_uib_init();
 
+	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
+		mop500_msp_init(parent);
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
 		/*
 		 * The HREFv60 board removed a GPIO expander and routed
@@ -815,6 +818,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		hrefv60_sdi_init(parent);
+		mop500_msp_init(parent);
 
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 626ad8cad7a..938b50a3343 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 		timer->reserved = 1;
 		break;
 	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (timer) {
 		ret = omap_dm_timer_prepare(timer);
@@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 			timer = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (!timer)
 		pr_debug("%s: timer request failed!\n", __func__);
@@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 			break;
 		}
 	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (timer) {
 		ret = omap_dm_timer_prepare(timer);
@@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 			timer = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (!timer)
 		pr_debug("%s: timer%d request failed!\n", __func__, id);
@@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
-	pm_runtime_put(&timer->pdev->dev);
+	pm_runtime_put_sync(&timer->pdev->dev);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 68b180edcff..bb5d08a70db 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
-				cpu_is_omap44xx() || soc_is_omap54xx())
+				cpu_is_omap44xx() || soc_is_omap54xx() || \
+				soc_is_am33xx())
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
index 045e320f106..324d31b1485 100644
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -108,4 +108,13 @@
 # endif
 #endif
 
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME am33xx
+# endif
+#endif
+
 #endif	/* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index b8d19a13678..7f7b112accc 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -110,7 +110,7 @@ static inline void flush(void)
 	_DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT,	\
 		AM33XXUART##p)
 
-static inline void __arch_decomp_setup(unsigned long arch_id)
+static inline void arch_decomp_setup(void)
 {
 	int port = 0;
 
@@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 	} while (0);
 }
 
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
 /*
  * nothing to do
  */
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index d245a87dc01..b8b747a9d36 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = {
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge00_shared_data,
 		    orion_ge00_resources, irq, &orion_ge00_shared,
 		    eth_data, &orion_ge00);
@@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = {
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge01_shared_data,
 		    orion_ge01_resources, irq, &orion_ge01_shared,
 		    eth_data, &orion_ge01);
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index e00fdb21360..ae2377ef63e 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase,
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 28f898f7538..db98e7021f0 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
  * when necessary.
 */
 
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			dma_addr_t data, int size)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 74e31ce3553..fc49f3dabd7 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -32,6 +32,8 @@
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
+#include <media/s5p_hdmi.h>
+
 #include <asm/irq.h>
 #include <asm/pmu.h>
 #include <asm/mach/arch.h>
@@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	if (!pd) {
 		pd = &default_i2c_data;
 
-		if (soc_is_exynos4210())
+		if (soc_is_exynos4210() ||
+		    soc_is_exynos4212() || soc_is_exynos4412())
 			pd->bus_num = 8;
 		else if (soc_is_s5pv210())
 			pd->bus_num = 3;
@@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
 			       &s5p_device_i2c_hdmiphy);
 }
+
+struct s5p_hdmi_platform_data s5p_hdmi_def_platdata;
+
+void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+				  struct i2c_board_info *mhl_info, int mhl_bus)
+{
+	struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
+
+	if (soc_is_exynos4210() ||
+	    soc_is_exynos4212() || soc_is_exynos4412())
+		pd->hdmiphy_bus = 8;
+	else if (soc_is_s5pv210())
+		pd->hdmiphy_bus = 3;
+	else
+		pd->hdmiphy_bus = 0;
+
+	pd->hdmiphy_info = hdmiphy_info;
+	pd->mhl_info = mhl_info;
+	pd->mhl_bus = mhl_bus;
+
+	s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data),
+			 &s5p_device_hdmi);
+}
+
 #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
 
 /* I2S */
diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h
new file mode 100644
index 00000000000..331d046ac2c
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/hdmi.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_HDMI_H
+#define __PLAT_SAMSUNG_HDMI_H __FILE__
+
+extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+				  struct i2c_board_info *mhl_info, int mhl_bus);
+
+#endif /* __PLAT_SAMSUNG_HDMI_H */
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 64ab65f0fdb..15070284343 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot;
 
 #ifdef CONFIG_SAMSUNG_PM_DEBUG
 
-struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
 
 static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 {