diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-02-21 15:33:45 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-02-21 15:33:45 -0800 |
| commit | 6c5096e5538b455bc3bea2b02588c380f070d8c6 (patch) | |
| tree | a2d08974a0c6a6fd19dff90bd3ab1827c23a5764 /arch/arm | |
| parent | bab588fcfb6335c767d811a8955979f5440328e0 (diff) | |
| parent | f628e3d92465303792d52c98fb0c95bef558f936 (diff) | |
Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC board specific changes from Arnd Bergmann:
"These updates are all for board specific code, including
- defconfig updates for shmobile, davinci, bcm2835, imx, omap and
tegra
- SD/MMC and I2C support on bcm2835 (Raspberry PI)
- minor updates for PXA
- shmobile updates to GPIO usage in board files
- More things in OMAP board files are moved over to device tree
probing
- Better support for audio devices on some OMAP platforms"
* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
ARM: imx_v4_v5_defconfig: Add VPU support
ARM: imx: configs: enable netfilter support
ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init
ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc
RX-51: Register twl4030-madc device
RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers
ARM: OMAP1: nokia770: enable CBUS/Retu
ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator
ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support
ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies
ARM: OMAP2+: craneboard: support the TPS65910 PMU
ARM: OMAP2+: craneboard: support NAND device
ARM: OMAP3: cm-t3517: add MMC support
ARM: OMAP2+: Remove apollon board support
ARM: shmobile: armadillo800eva: set clock rates before timer init
ARM: tegra: defconfig updates
ARM: shmobile: mackerel: Use gpio_request_one()
ARM: shmobile: kzm9g: Use gpio_request_one()
ARM: shmobile: bonito: Use gpio_request_one()
...
Diffstat (limited to 'arch/arm')
46 files changed, 536 insertions, 616 deletions
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 297e3baba71..b9b3241f173 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -21,6 +21,6 @@ }; chosen { - bootargs = "console=ttyS1,115200n81"; + bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; }; }; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index a7505a95a3b..93da655b259 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -9,12 +9,16 @@ */ /dts-v1/; -/include/ "skeleton.dtsi" +/include/ "r8a7740.dtsi" / { model = "armadillo 800 eva"; compatible = "renesas,armadillo800eva"; + chosen { + bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"; + }; + memory { device_type = "memory"; reg = <0x40000000 0x20000000>; diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts index 286f0caef01..8acf51e0cda 100644 --- a/arch/arm/boot/dts/sh7372-mackerel.dts +++ b/arch/arm/boot/dts/sh7372-mackerel.dts @@ -9,12 +9,16 @@ */ /dts-v1/; -/include/ "skeleton.dtsi" +/include/ "sh7372.dtsi" / { model = "Mackerel (AP4 EVM 2nd)"; compatible = "renesas,mackerel"; + chosen { + bootargs = "console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp mem=240m rw"; + }; + memory { device_type = "memory"; reg = <0x40000000 0x10000000>; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index bcb91195197..7c4071e7790 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -9,12 +9,16 @@ */ /dts-v1/; -/include/ "skeleton.dtsi" +/include/ "sh73a0.dtsi" / { model = "KZM-A9-GT"; compatible = "renesas,kzm9g", "renesas,sh73a0"; + chosen { + bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"; + }; + memory { device_type = "memory"; reg = <0x41000000 0x1e800000>; diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 2e1a8257720..0b98100d2ae 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -34,12 +34,11 @@ CONFIG_AEABI=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw" -CONFIG_CMDLINE_FORCE=y +CONFIG_ARM_APPENDED_DTB=y CONFIG_KEXEC=y CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_SUSPEND is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -91,14 +90,11 @@ CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y -# CONFIG_RC_CORE is not set -# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set -# CONFIG_V4L_USB_DRIVERS is not set +CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_MT9T112=y CONFIG_VIDEO_SH_MOBILE_CEU=y -# CONFIG_RADIO_ADAPTERS is not set CONFIG_FB=y CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SH_MOBILE_HDMI=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 74e27f0ff6a..af472e4ed45 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -1,11 +1,10 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y @@ -30,13 +29,10 @@ CONFIG_EMBEDDED=y CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_JUMP_LABEL=y -# CONFIG_BLOCK is not set CONFIG_ARCH_BCM2835=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_COMPACTION=y CONFIG_KSM=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_CLEANCACHE=y CONFIG_SECCOMP=y CONFIG_CC_STACKPROTECTOR=y @@ -45,6 +41,11 @@ CONFIG_CRASH_DUMP=y CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETWORK_SECMARK=y +# CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set @@ -53,20 +54,42 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set -# CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_TTY_PRINTK=y # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_BCM2835=y +CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set # CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_BCM2835=y # CONFIG_IOMMU_SUPPORT is not set -# CONFIG_FILE_LOCKING is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_FANOTIFY=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFSD=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index f29223954af..6b36a5ae03c 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -36,6 +36,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=m CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_IDLE=y +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -45,6 +46,8 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_LRO is not set CONFIG_NETFILTER=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_RAM=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 4ea7c95719d..3edc78a40b6 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -33,6 +33,7 @@ CONFIG_AEABI=y CONFIG_LEDS=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -42,6 +43,8 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_LRO is not set CONFIG_NETFILTER=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set CONFIG_MTD=m CONFIG_MTD_PARTITIONS=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index ebbfb27e0e7..02c657af400 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -61,6 +61,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set +CONFIG_NETFILTER=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -127,6 +128,8 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX2=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_CODA=y CONFIG_FB=y CONFIG_FB_IMX=y CONFIG_BACKLIGHT_LCD_SUPPORT=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 0a396678756..e36b0102532 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -59,6 +59,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set CONFIG_IPV6=y +CONFIG_NETFILTER=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y diff --git a/arch/arm/configs/kota2_defconfig b/arch/arm/configs/kota2_defconfig index fa83db1ef0e..57ad3d47de7 100644 --- a/arch/arm/configs/kota2_defconfig +++ b/arch/arm/configs/kota2_defconfig @@ -21,7 +21,7 @@ CONFIG_ARCH_SHMOBILE=y CONFIG_KEYBOARD_GPIO_POLLED=y CONFIG_ARCH_SH73A0=y CONFIG_MACH_KOTA2=y -CONFIG_MEMORY_SIZE=0x1e0000000 +CONFIG_MEMORY_SIZE=0x1e000000 # CONFIG_SH_TIMER_TMU is not set # CONFIG_SWP_EMULATE is not set CONFIG_CPU_BPREDICT_DISABLE=y diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig index 8c49df66cac..6c37f4a98eb 100644 --- a/arch/arm/configs/kzm9d_defconfig +++ b/arch/arm/configs/kzm9d_defconfig @@ -32,11 +32,9 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y -CONFIG_CMDLINE="console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" -CONFIG_CMDLINE_FORCE=y CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_SUSPEND is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index afbae287436..670c3b60f93 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -39,7 +39,7 @@ CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200" +CONFIG_ARM_APPENDED_DTB=y CONFIG_KEXEC=y CONFIG_VFP=y CONFIG_NEON=y @@ -85,6 +85,8 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_SH_MOBILE=y CONFIG_GPIO_PCF857X=y # CONFIG_HWMON is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_DUMMY=y CONFIG_FB=y CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FRAMEBUFFER_CONSOLE=y diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig index 2098ce15554..7594b3aff25 100644 --- a/arch/arm/configs/mackerel_defconfig +++ b/arch/arm/configs/mackerel_defconfig @@ -23,8 +23,9 @@ CONFIG_AEABI=y CONFIG_FORCE_MAX_ZONEORDER=15 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp memchunk.vpu=64m memchunk.veu0=8m memchunk.spu0=2m mem=240m" +CONFIG_ARM_APPENDED_DTB=y CONFIG_KEXEC=y +CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM=y CONFIG_PM_RUNTIME=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 5be2e4be802..b16bae2c9a6 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -53,6 +53,11 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_BT=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y @@ -65,6 +70,7 @@ CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_CMA=y CONFIG_CONNECTOR=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -84,6 +90,9 @@ CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_SENSORS_LIS3LV02D=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_LIS3_I2C=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -109,6 +118,7 @@ CONFIG_USB_KC2190=y CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_MATRIX=m CONFIG_KEYBOARD_TWL4030=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y @@ -134,14 +144,17 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_TWL4030=y CONFIG_W1=y CONFIG_POWER_SUPPLY=y +CONFIG_SENSORS_LM75=m CONFIG_WATCHDOG=y CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65910=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y @@ -153,6 +166,7 @@ CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m CONFIG_PANEL_GENERIC_DPI=m +CONFIG_PANEL_TFP410=m CONFIG_PANEL_SHARP_LS037V7DW01=m CONFIG_PANEL_NEC_NL8048HL11_01B=m CONFIG_PANEL_TAAL=m @@ -200,9 +214,20 @@ CONFIG_SDIO_UART=y CONFIG_MMC_ARMMMCI=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_OMAP=y CONFIG_DMADEVICES=y CONFIG_DMA_OMAP=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index a7827fd0616..aba4881d20e 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -38,6 +38,7 @@ CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_AUTO_ZRELADDR=y +CONFIG_KEXEC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y @@ -106,12 +107,14 @@ CONFIG_BRCMFMAC=m CONFIG_RT2X00=y CONFIG_RT2800USB=m CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_TEGRA=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y @@ -127,6 +130,8 @@ CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_SBS=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO=y CONFIG_SENSORS_LM90=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y @@ -186,6 +191,7 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_MAX8907=y +CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_TEGRA=y diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 3a76a47df39..1f50a653eb8 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -349,13 +349,13 @@ static inline void da850_evm_setup_nor_nand(void) if (!HAS_MMC) { ret = davinci_cfg_reg_list(da850_evm_nand_pins); if (ret) - pr_warning("da850_evm_init: nand mux setup failed: " - "%d\n", ret); + pr_warn("%s: NAND mux setup failed: %d\n", + __func__, ret); ret = davinci_cfg_reg_list(da850_evm_nor_pins); if (ret) - pr_warning("da850_evm_init: nor mux setup failed: %d\n", - ret); + pr_warn("%s: NOR mux setup failed: %d\n", + __func__, ret); da850_evm_init_nor(); @@ -477,19 +477,19 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]); if (ret) { - pr_warning("Cannot open UI expander pin %d\n", sel_a); + pr_warn("Cannot open UI expander pin %d\n", sel_a); goto exp_setup_sela_fail; } ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]); if (ret) { - pr_warning("Cannot open UI expander pin %d\n", sel_b); + pr_warn("Cannot open UI expander pin %d\n", sel_b); goto exp_setup_selb_fail; } ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]); if (ret) { - pr_warning("Cannot open UI expander pin %d\n", sel_c); + pr_warn("Cannot open UI expander pin %d\n", sel_c); goto exp_setup_selc_fail; } @@ -501,7 +501,7 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, da850_evm_ui_keys_init(gpio); ret = platform_device_register(&da850_evm_ui_keys_device); if (ret) { - pr_warning("Could not register UI GPIO expander push-buttons"); + pr_warn("Could not register UI GPIO expander push-buttons"); goto exp_setup_keys_fail; } @@ -690,14 +690,14 @@ static int da850_evm_bb_expander_setup(struct i2c_client *client, da850_evm_bb_keys_init(gpio); ret = platform_device_register(&da850_evm_bb_keys_device); if (ret) { - pr_warning("Could not register baseboard GPIO expander keys"); + pr_warn("Could not register baseboard GPIO expander keys"); goto io_exp_setup_sw_fail; } da850_evm_bb_leds_init(gpio); ret = platform_device_register(&da850_evm_bb_leds_device); if (ret) { - pr_warning("Could not register baseboard GPIO expander LEDS"); + pr_warn("Could not register baseboard GPIO expander LEDs"); goto io_exp_setup_leds_fail; } @@ -1065,21 +1065,19 @@ static int __init da850_evm_config_emac(void) } if (ret) - pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n", - ret); + pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n", + __func__, ret); /* configure the CFGCHIP3 register for RMII or MII */ __raw_writel(val, cfg_chip3_base); ret = davinci_cfg_reg(DA850_GPIO2_6); if (ret) - pr_warning("da850_evm_init:GPIO(2,6) mux setup " - "failed\n"); + pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__); ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en"); if (ret) { - pr_warning("Cannot open GPIO %d\n", - DA850_MII_MDIO_CLKEN_PIN); + pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN); return ret; } @@ -1090,8 +1088,7 @@ static int __init da850_evm_config_emac(void) ret = da8xx_register_emac(); if (ret) - pr_warning("da850_evm_init: emac registration failed: %d\n", - ret); + pr_warn("%s: EMAC registration failed: %d\n", __func__, ret); return 0; } @@ -1443,57 +1440,53 @@ static __init void da850_evm_init(void) ret = pmic_tps65070_init(); if (ret) - pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n", - ret); + pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret); ret = da850_register_edma(da850_edma_rsv); if (ret) - pr_warning("da850_evm_init: edma registration failed: %d\n", - ret); + pr_warn("%s: EDMA registration failed: %d\n", __func__, ret); ret = davinci_cfg_reg_list(da850_i2c0_pins); if (ret) - pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n", - ret); + pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret); ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata); if (ret) - pr_warning("da850_evm_init: i2c0 registration failed: %d\n", - ret); + pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret); ret = da8xx_register_watchdog(); if (ret) - pr_warning("da830_evm_init: watchdog registration failed: %d\n", - ret); + pr_warn("%s: watchdog registration failed: %d\n", + __func__, ret); if (HAS_MMC) { ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins); if (ret) - pr_warning("da850_evm_init: mmcsd0 mux setup failed:" - " %d\n", ret); + pr_warn("%s: MMCSD0 mux setup failed: %d\n", + __func__, ret); ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n"); if (ret) - pr_warning("da850_evm_init: can not open GPIO %d\n", - DA850_MMCSD_CD_PIN); + pr_warn("%s: can not open GPIO %d\n", + __func__, DA850_MMCSD_CD_PIN); gpio_direction_input(DA850_MMCSD_CD_PIN); ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n"); if (ret) - pr_warning("da850_evm_init: can not open GPIO %d\n", - DA850_MMCSD_WP_PIN); + pr_warn("%s: can not open GPIO %d\n", + __func__, DA850_MMCSD_WP_PIN); gpio_direction_input(DA850_MMCSD_WP_PIN); ret = da8xx_register_mmcsd0(&da850_mmc_config); if (ret) - pr_warning("da850_evm_init: mmcsd0 registration failed:" - " %d\n", ret); + pr_warn("%s: MMCSD0 registration failed: %d\n", + __func__, ret); ret = da850_wl12xx_init(); if (ret) - pr_warning("da850_evm_init: wl12xx initialization" - " failed: %d\n", ret); + pr_warn("%s: WL12xx initialization failed: %d\n", + __func__, ret); } davinci_serial_init(&da850_evm_uart_config); @@ -1511,16 +1504,14 @@ static __init void da850_evm_init(void) ret = davinci_cfg_reg_list(da850_evm_mcasp_pins); if (ret) - pr_warning("da850_evm_init: mcasp mux setup failed: %d\n", - ret); + pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret); da850_evm_snd_data.sram_pool = sram_get_gen_pool(); da8xx_register_mcasp(0, &da850_evm_snd_data); ret = davinci_cfg_reg_list(da850_lcdcntl_pins); if (ret) - pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", - ret); + pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret); ret = da8xx_register_uio_pruss(); if (ret) @@ -1530,38 +1521,33 @@ static __init void da850_evm_init(void) /* Handle board specific muxing for LCD here */ ret = davinci_cfg_reg_list(da850_evm_lcdc_pins); if (ret) - pr_warning("da850_evm_init: evm specific lcd mux setup " - "failed: %d\n", ret); + pr_warn("%s: EVM specific LCD mux setup failed: %d\n", + __func__, ret); ret = da850_lcd_hw_init(); if (ret) - pr_warning("da850_evm_init: lcd initialization failed: %d\n", - ret); + pr_warn("%s: LCD initialization failed: %d\n", __func__, ret); sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl, ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata); if (ret) - pr_warning("da850_evm_init: lcdc registration failed: %d\n", - ret); + pr_warn("%s: LCDC registration failed: %d\n", __func__, ret); ret = da8xx_register_rtc(); if (ret) - pr_warning("da850_evm_init: rtc setup failed: %d\n", ret); + pr_warn("%s: RTC setup failed: %d\n", __func__, ret); ret = da850_evm_init_cpufreq(); if (ret) - pr_warning("da850_evm_init: cpufreq registration failed: %d\n", - ret); + pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret); ret = da8xx_register_cpuidle(); if (ret) - pr_warning("da850_evm_init: cpuidle registration failed: %d\n", - ret); + pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret); ret = da850_register_pm(&da850_pm_device); if (ret) - pr_warning("da850_evm_init: suspend registration failed: %d\n", - ret); + pr_warn("%s: suspend registration failed: %d\n", __func__, ret); da850_vpif_init(); @@ -1573,13 +1559,11 @@ static __init void da850_evm_init(void) ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info)); if (ret) - pr_warning("da850_evm_init: spi 1 registration failed: %d\n", - ret); + pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret); ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE); if (ret) - pr_warning("da850_evm_init: sata registration failed: %d\n", - ret); + pr_warn("%s: SATA registration failed: %d\n", __func__, ret); da850_evm_setup_mac_addr(); } diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index deb3922612b..5a2bd44da54 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -48,8 +48,7 @@ static __init void omapl138_hawk_config_emac(void) val &= ~BIT(8); ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins); if (ret) { - pr_warning("%s: cpgmac/mii mux setup failed: %d\n", - __func__, ret); + pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret); return; } @@ -61,8 +60,7 @@ static __init void omapl138_hawk_config_emac(void) ret = da8xx_register_emac(); if (ret) - pr_warning("%s: emac registration failed: %d\n", - __func__, ret); + pr_warn("%s: EMAC registration failed: %d\n", __func__, ret); } /* @@ -147,15 +145,14 @@ static __init void omapl138_hawk_mmc_init(void) ret = davinci_cfg_reg_list(hawk_mmcsd0_pins); if (ret) { - pr_warning("%s: MMC/SD0 mux setup failed: %d\n", - __func__, ret); + pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret); return; } ret = gpio_request_one(DA850_HAWK_MMCSD_CD_PIN, GPIOF_DIR_IN, "MMC CD"); if (ret < 0) { - pr_warning("%s: can not open GPIO %d\n", + pr_warn("%s: can not open GPIO %d\n", __func__, DA850_HAWK_MMCSD_CD_PIN); return; } @@ -163,15 +160,14 @@ static __init void omapl138_hawk_mmc_init(void) ret = gpio_request_one(DA850_HAWK_MMCSD_WP_PIN, GPIOF_DIR_IN, "MMC WP"); if (ret < 0) { - pr_warning("%s: can not open GPIO %d\n", + pr_warn("%s: can not open GPIO %d\n", __func__, DA850_HAWK_MMCSD_WP_PIN); goto mmc_setup_wp_fail; } ret = da8xx_register_mmcsd0(&da850_mmc_config); if (ret) { - pr_warning("%s: MMC/SD0 registration failed: %d\n", - __func__, ret); + pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret); goto mmc_setup_mmcsd_fail; } @@ -250,8 +246,7 @@ static __init void omapl138_hawk_usb_init(void) ret = davinci_cfg_reg_list(da850_hawk_usb11_pins); if (ret) { - pr_warning("%s: USB 1.1 PinMux setup failed: %d\n", - __func__, ret); + pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret); return; } @@ -280,8 +275,7 @@ static __init void omapl138_hawk_usb_init(void) ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata); if (ret) { - pr_warning("%s: USB 1.1 registration failed: %d\n", - __func__, ret); + pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret); goto usb11_setup_fail; } @@ -307,8 +301,7 @@ static __init void omapl138_hawk_init(void) ret = da850_register_edma(da850_edma_rsv); if (ret) - pr_warning("%s: EDMA registration failed: %d\n", - __func__, ret); + pr_warn("%s: EDMA registration failed: %d\n", __func__, ret); omapl138_hawk_mmc_init(); @@ -316,9 +309,8 @@ static __init void omapl138_hawk_init(void) ret = da8xx_register_watchdog(); if (ret) - pr_warning("omapl138_hawk_init: " - "watchdog registration failed: %d\n", - ret); + pr_warn("%s: watchdog registration failed: %d\n", + __func__, ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 4695ca71770..62a15e289c7 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/irq.h> #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> @@ -23,6 +24,8 @@ #include <linux/platform_data/keypad-omap.h> #include <linux/platform_data/lcd-mipid.h> +#include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/i2c-cbus-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -212,6 +215,45 @@ static inline void nokia770_mmc_init(void) } #endif +#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE) +static struct i2c_cbus_platform_data nokia770_cbus_data = { + .clk_gpio = OMAP_MPUIO(9), + .dat_gpio = OMAP_MPUIO(10), + .sel_gpio = OMAP_MPUIO(11), +}; + +static struct platform_device nokia770_cbus_device = { + .name = "i2c-cbus-gpio", + .id = 2, + .dev = { + .platform_data = &nokia770_cbus_data, + }, +}; + +static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = { + { + I2C_BOARD_INFO("retu-mfd", 0x01), + }, +}; + +static void __init nokia770_cbus_init(void) +{ + const int retu_irq_gpio = 62; + + if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ")) + return; + irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING); + nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio); + i2c_register_board_info(2, nokia770_i2c_board_info_2, + ARRAY_SIZE(nokia770_i2c_board_info_2)); + platform_device_register(&nokia770_cbus_device); +} +#else /* CONFIG_I2C_CBUS_GPIO */ +static void __init nokia770_cbus_init(void) +{ +} +#endif /* CONFIG_I2C_CBUS_GPIO */ + static void __init omap_nokia770_init(void) { /* On Nokia 770, the SleepX signal is masked with an @@ -233,6 +275,7 @@ static void __init omap_nokia770_init(void) mipid_dev_init(); omap1_usb_init(&nokia770_usb_config); nokia770_mmc_init(); + nokia770_cbus_init(); } MACHINE_START(NOKIA770, "Nokia 770") diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index c3c033f283a..22ad24e9496 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -188,12 +188,6 @@ config MACH_OMAP_H4 select OMAP_DEBUG_DEVICES select OMAP_PACKAGE_ZAF -config MACH_OMAP_APOLLON - bool "OMAP 2420 Apollon board" - depends on SOC_OMAP2420 - default y - select OMAP_PACKAGE_ZAC - config MACH_OMAP_2430SDP bool "OMAP 2430 SDP board" depends on SOC_OMAP2430 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 65fb6fb38ca..ff528df7011 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -223,7 +223,6 @@ endif obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o -obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 15a3914ab49..ce812decfac 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -25,6 +25,7 @@ #include <linux/gpio.h> #include <linux/mmc/host.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/omap-twl4030.h> #include <linux/usb/phy.h> #include <asm/mach-types.h> @@ -210,6 +211,19 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct omap_tw4030_pdata omap_twl4030_audio_data = { + .voice_connected = true, + .custom_routing = true, + + .has_hs = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, + .has_hf = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, + + .has_mainmic = true, + .has_submic = true, + .has_hsmic = true, + .has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, +}; + static int sdp3430_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -226,6 +240,9 @@ static int sdp3430_twl_gpio_setup(struct device *dev, /* gpio + 15 is "sub_lcd_nRST" (output) */ gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST"); + omap_twl4030_audio_data.jack_detect = gpio + 2; + omap_twl4030_audio_init("SDP3430", &omap_twl4030_audio_data); + return 0; } @@ -383,6 +400,9 @@ static int __init omap3430_i2c_init(void) sdp3430_twldata.vpll2->constraints.apply_uV = true; sdp3430_twldata.vpll2->constraints.name = "VDVI"; + sdp3430_twldata.audio->codec->hs_extmute = 1; + sdp3430_twldata.audio->codec->hs_extmute_gpio = -EINVAL; + omap3_pmic_init("twl4030", &sdp3430_twldata); /* i2c2 on camera connector (for sensor control) and optional isp1301 */ diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 508e2752b7d..35f3ad0cb7c 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -24,8 +24,10 @@ #include <linux/gpio_keys.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> +#include <linux/pwm.h> #include <linux/leds.h> #include <linux/leds_pwm.h> +#include <linux/pwm_backlight.h> #include <linux/irqchip/arm-gic.h> #include <linux/platform_data/omap4-keypad.h> #include <linux/usb/musb.h> @@ -257,10 +259,20 @@ static struct gpio_led_platform_data sdp4430_led_data = { .num_leds = ARRAY_SIZE(sdp4430_gpio_leds), }; +static struct pwm_lookup sdp4430_pwm_lookup[] = { + PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "omap4::keypad"), + PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", NULL), + PWM_LOOKUP("twl-pwmled", 0, "leds_pwm", "omap4:green:chrg"), +}; + static struct led_pwm sdp4430_pwm_leds[] = { { + .name = "omap4::keypad", + .max_brightness = 127, + .pwm_period_ns = 7812500, + }, + { .name = "omap4:green:chrg", - .pwm_id = 1, .max_brightness = 255, .pwm_period_ns = 7812500, }, @@ -279,6 +291,20 @@ static struct platform_device sdp4430_leds_pwm = { }, }; +static struct platform_pwm_backlight_data sdp4430_backlight_data = { + .max_brightness = 127, + .dft_brightness = 127, + .pwm_period_ns = 7812500, +}; + +static struct platform_device sdp4430_backlight_pwm = { + .name = "pwm-backlight", + .id = -1, + .dev = { + .platform_data = &sdp4430_backlight_data, + }, +}; + static int omap_prox_activate(struct device *dev) { gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1); @@ -413,6 +439,7 @@ static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, + &sdp4430_backlight_pwm, &sdp4430_vbat, &sdp4430_dmic_codec, &sdp4430_abe_audio, @@ -709,6 +736,7 @@ static void __init omap_4430sdp_init(void) ARRAY_SIZE(sdp4430_spi_board_info)); } + pwm_add_table(sdp4430_pwm_lookup, ARRAY_SIZE(sdp4430_pwm_lookup)); status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data); if (status) pr_err("Keypad initialization failed: %d\n", status); diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 52cc2c59731..7d3358b2e59 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -20,12 +20,18 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/mfd/tps65910.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" +#include "common-board-devices.h" +#include "board-flash.h" #include "am35xx-emac.h" #include "mux.h" @@ -36,6 +42,7 @@ #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif @@ -51,6 +58,54 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +static struct mtd_partition crane_nand_partitions[] = { + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = 14 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, + .size = 2 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = 40 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct tps65910_board tps65910_pdata = { + .irq = 7 + OMAP_INTC_START, + .en_ck32k_xtal = true, +}; + +static struct i2c_board_info __initdata tps65910_board_info[] = { + { + I2C_BOARD_INFO("tps65910", 0x2d), + .platform_data = &tps65910_pdata, + }, +}; + +static void __init am3517_crane_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, tps65910_board_info, + ARRAY_SIZE(tps65910_board_info)); +} + static void __init am3517_crane_init(void) { int ret; @@ -58,6 +113,10 @@ static void __init am3517_crane_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); omap_sdrc_init(NULL, NULL); + board_nand_init(crane_nand_partitions, + ARRAY_SIZE(crane_nand_partitions), 0, + NAND_BUSWIDTH_16, NULL); + am3517_crane_i2c_init(); /* Configure GPIO for EHCI port */ if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) { diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c deleted file mode 100644 index 3a6ca74709a..00000000000 --- a/arch/arm/mach-omap2/board-apollon.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-apollon.c - * - * Copyright (C) 2005,2006 Samsung Electronics - * Author: Kyungmin Park <kyungmin.park@samsung.com> - * - * Modified from mach-omap/omap2/board-h4.c - * - * Code for apollon OMAP2 board. Should work on many OMAP2 systems where - * the bootloader passes the board-specific data to the kernel. - * Do not put any board specific code to this file; create a new machine - * type if you need custom low-level initializations. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/onenand.h> -#include <linux/delay.h> -#include <linux/leds.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/smc91x.h> -#include <linux/gpio.h> -#include <linux/platform_data/leds-omap.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -#include "common.h" -#include "gpmc.h" - -#include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> - -#include "mux.h" -#include "control.h" - -/* LED & Switch macros */ -#define LED0_GPIO13 13 -#define LED1_GPIO14 14 -#define LED2_GPIO15 15 -#define SW_ENTER_GPIO16 16 -#define SW_UP_GPIO17 17 -#define SW_DOWN_GPIO58 58 - -#define APOLLON_FLASH_CS 0 -#define APOLLON_ETH_CS 1 -#define APOLLON_ETHR_GPIO_IRQ 74 - -static struct mtd_partition apollon_partitions[] = { - { - .name = "X-Loader + U-Boot", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = SZ_16M, - }, - { - .name = "filesystem00", - .offset = MTDPART_OFS_APPEND, - .size = SZ_32M, - }, - { - .name = "filesystem01", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct onenand_platform_data apollon_flash_data = { - .parts = apollon_partitions, - .nr_parts = ARRAY_SIZE(apollon_partitions), -}; - -static struct resource apollon_flash_resource[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device apollon_onenand_device = { - .name = "onenand-flash", - .id = -1, - .dev = { - .platform_data = &apollon_flash_data, - }, - .num_resources = ARRAY_SIZE(apollon_flash_resource), - .resource = apollon_flash_resource, -}; - -static void __init apollon_flash_init(void) -{ - unsigned long base; - - if (gpmc_cs_request(APOLLON_FLASH_CS, SZ_128K, &base) < 0) { - printk(KERN_ERR "Cannot request OneNAND GPMC CS\n"); - return; - } - apollon_flash_resource[0].start = base; - apollon_flash_resource[0].end = base + SZ_128K - 1; -} - -static struct smc91x_platdata appolon_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource apollon_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device apollon_smc91x_device = { - .name = "smc91x", - .id = -1, - .dev = { - .platform_data = &appolon_smc91x_info, - }, - .num_resources = ARRAY_SIZE(apollon_smc91x_resources), - .resource = apollon_smc91x_resources, -}; - -static struct omap_led_config apollon_led_config[] = { - { - .cdev = { - .name = "apollon:led0", - }, - .gpio = LED0_GPIO13, - }, - { - .cdev = { - .name = "apollon:led1", - }, - .gpio = LED1_GPIO14, - }, - { - .cdev = { - .name = "apollon:led2", - }, - .gpio = LED2_GPIO15, - }, -}; - -static struct omap_led_platform_data apollon_led_data = { - .nr_leds = ARRAY_SIZE(apollon_led_config), - .leds = apollon_led_config, -}; - -static struct platform_device apollon_led_device = { - .name = "omap-led", - .id = -1, - .dev = { - .platform_data = &apollon_led_data, - }, -}; - -static struct platform_device *apollon_devices[] __initdata = { - &apollon_onenand_device, - &apollon_smc91x_device, - &apollon_led_device, -}; - -static inline void __init apollon_init_smc91x(void) -{ - unsigned long base; - - unsigned int rate; - struct clk *gpmc_fck; - int eth_cs; - int err; - - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) { - WARN_ON(1); - return; - } - - clk_prepare_enable(gpmc_fck); - rate = clk_get_rate(gpmc_fck); - - eth_cs = APOLLON_ETH_CS; - - /* Make sure CS1 timings are correct */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200); - - if (rate >= 160000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else if (rate >= 130000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else {/* rate = 100000000 */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); - } - - if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) { - printk(KERN_ERR "Failed to request GPMC CS for smc91x\n"); - goto out; - } - apollon_smc91x_resources[0].start = base + 0x300; - apollon_smc91x_resources[0].end = base + 0x30f; - udelay(100); - - omap_mux_init_gpio(APOLLON_ETHR_GPIO_IRQ, 0); - err = gpio_request_one(APOLLON_ETHR_GPIO_IRQ, GPIOF_IN, "SMC91x irq"); - if (err) { - printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", - APOLLON_ETHR_GPIO_IRQ); - gpmc_cs_free(APOLLON_ETH_CS); - } -out: - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); -} - -static struct panel_generic_dpi_data apollon_panel_data = { - .name = "apollon", -}; - -static struct omap_dss_device apollon_lcd_device = { - .name = "lcd", - .driver_name = "generic_dpi_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 18, - .data = &apollon_panel_data, -}; - -static struct omap_dss_device *apollon_dss_devices[] = { - &apollon_lcd_device, -}; - -static struct omap_dss_board_info apollon_dss_data = { - .num_devices = ARRAY_SIZE(apollon_dss_devices), - .devices = apollon_dss_devices, - .default_device = &apollon_lcd_device, -}; - -static struct gpio apollon_gpio_leds[] __initdata = { - { LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */ - { LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */ - { LED2_GPIO15, GPIOF_OUT_INIT_LOW, "LED2" }, /* LED2 - AA4 */ -}; - -static void __init apollon_led_init(void) -{ - omap_mux_init_signal("vlynq_clk.gpio_13", 0); - omap_mux_init_signal("vlynq_rx1.gpio_14", 0); - omap_mux_init_signal("vlynq_rx0.gpio_15", 0); - - gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds)); -} - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init omap_apollon_init(void) -{ - u32 v; - - omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); - - apollon_init_smc91x(); - apollon_led_init(); - apollon_flash_init(); - - /* REVISIT: where's the correct place */ - omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP); - - /* LCD PWR_EN */ - omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); - - /* Use Internal loop-back in MMC/SDIO Module Input Clock selection */ - v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - v |= (1 << 24); - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); - - /* - * Make sure the serial ports are muxed on at this point. - * You have to mux them off in device drivers later on - * if not needed. - */ - apollon_smc91x_resources[1].start = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ); - apollon_smc91x_resources[1].end = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ); - platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices)); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - omap_display_init(&apollon_dss_data); -} - -MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") - /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap242x_map_io, - .init_early = omap2420_init_early, - .init_irq = omap2_init_irq, - .handle_irq = omap2_intc_handle_irq, - .init_machine = omap_apollon_init, - .init_late = omap2420_init_late, - .init_time = omap2_sync32k_timer_init, - .restart = omap2xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 10054e3c348..af2bb219e21 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -723,7 +723,7 @@ static void __init cm_t3x_common_init(void) cm_t35_init_ethernet(); cm_t35_init_led(); cm_t35_init_display(); - omap_twl4030_audio_init("cm-t3x"); + omap_twl4030_audio_init("cm-t3x", NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 5e54f565a29..a66da808cc4 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -32,6 +32,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mmc/host.h> #include <linux/can/platform/ti_hecc.h> #include <asm/mach-types.h> @@ -46,6 +47,7 @@ #include "mux.h" #include "control.h" +#include "hsmmc.h" #include "common-board-devices.h" #include "am35xx-emac.h" #include "gpmc-nand.h" @@ -121,6 +123,26 @@ static void cm_t3517_init_hecc(void) static inline void cm_t3517_init_hecc(void) {} #endif +#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) +static struct omap2_hsmmc_info cm_t3517_mmc[] = { + { + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = 144, + .gpio_wp = 59, + }, + { + .mmc = 2, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + {} /* Terminator */ +}; +#else +#define cm_t3517_mmc NULL +#endif + #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) #define RTC_IO_GPIO (153) #define RTC_WR_GPIO (154) @@ -271,6 +293,10 @@ static struct omap_board_mux board_mux[] __initdata = { /* CM-T3517 USB HUB nRESET */ OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* CD - GPIO144 and WP - GPIO59 for MMC1 - SB-T35 */ + OMAP3_MUX(UART2_CTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(GPMC_CLK, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif @@ -286,6 +312,7 @@ static void __init cm_t3517_init(void) cm_t3517_init_usbh(); cm_t3517_init_hecc(); am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); + omap_hsmmc_init(cm_t3517_mmc); } MACHINE_START(CM_T3517, "Compulab CM-T3517") diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 4dadb0b7b80..53056c3b083 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -629,7 +629,7 @@ static void __init devkit8000_init(void) board_nand_init(devkit8000_nand_partitions, ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, NAND_BUSWIDTH_16, NULL); - omap_twl4030_audio_init("omap3beagle"); + omap_twl4030_audio_init("omap3beagle", NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index c10738a067c..bf92678a01d 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -301,20 +301,20 @@ static struct omap2_hsmmc_info mmc[] = { static struct gpio_led igep_gpio_leds[] = { [0] = { - .name = "gpio-led:red:d0", - .default_trigger = "default-off" + .name = "omap3:red:user0", + .default_state = 0, }, [1] = { - .name = "gpio-led:green:d0", - .default_trigger = "default-off", + .name = "omap3:green:boot", + .default_state = 1, }, [2] = { - .name = "gpio-led:red:d1", - .default_trigger = "default-off", + .name = "omap3:red:user1", + .default_state = 0, }, [3] = { - .name = "gpio-led:green:d1", - .default_trigger = "heartbeat", + .name = "omap3:green:user1", + .default_state = 0, .gpio = -EINVAL, /* gets replaced */ .active_low = 1, }, @@ -631,7 +631,7 @@ static void __init igep_init(void) igep_flash_init(); igep_leds_init(); - omap_twl4030_audio_init("igep2"); + omap_twl4030_audio_init("igep2", NULL); /* * WLAN-BT combo module from MuRata which has a Marvell WLAN diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 70bc1fc808c..c3558f93d42 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -20,6 +20,8 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/leds.h> +#include <linux/pwm.h> +#include <linux/leds_pwm.h> #include <linux/gpio.h> #include <linux/input.h> #include <linux/gpio_keys.h> @@ -56,6 +58,32 @@ #define NAND_CS 0 +static struct pwm_lookup pwm_lookup[] = { + /* LEDB -> PMU_STAT */ + PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat"), +}; + +static struct led_pwm pwm_leds[] = { + { + .name = "beagleboard::pmu_stat", + .max_brightness = 127, + .pwm_period_ns = 7812500, + }, +}; + +static struct led_pwm_platform_data pwm_data = { + .num_leds = ARRAY_SIZE(pwm_leds), + .leds = pwm_leds, +}; + +static struct platform_device leds_pwm = { + .name = "leds_pwm", + .id = -1, + .dev = { + .platform_data = &pwm_data, + }, +}; + /* * OMAP3 Beagle revision * Run time detection of Beagle revision is done by reading GPIO. @@ -293,9 +321,6 @@ static int beagle_twl_gpio_setup(struct device *dev, gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - return 0; } @@ -377,11 +402,6 @@ static struct gpio_led gpio_leds[] = { .default_trigger = "mmc0", .gpio = 149, }, - { - .name = "beagleboard::pmu_stat", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - }, }; static struct gpio_led_platform_data gpio_led_info = { @@ -429,6 +449,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { &leds_gpio, &keys_gpio, &madc_hwmon, + &leds_pwm, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { @@ -526,7 +547,7 @@ static void __init omap3_beagle_init(void) board_nand_init(omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, NAND_BUSWIDTH_16, NULL); - omap_twl4030_audio_init("omap3beagle"); + omap_twl4030_audio_init("omap3beagle", NULL); /* Ensure msecure is mux'd to be able to set the RTC. */ omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH); @@ -534,6 +555,8 @@ static void __init omap3_beagle_init(void) /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); + + pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); } MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 8258a78c3df..48789e0bb91 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -746,7 +746,7 @@ static void __init omap3_evm_init(void) omap3evm_init_smsc911x(); omap3_evm_display_init(); omap3_evm_wl12xx_init(); - omap_twl4030_audio_init("omap3evm"); + omap_twl4030_audio_init("omap3evm", NULL); } MACHINE_START(OMAP3EVM, "OMAP3 EVM") diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 1bcf39671c3..86bab51154e 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -508,7 +508,7 @@ static void __init overo_init(void) overo_display_init(); overo_init_led(); overo_init_keys(); - omap_twl4030_audio_init("overo"); + omap_twl4030_audio_init("overo", NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index f3d075baebb..c26d441ca4f 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -162,30 +162,39 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = { #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) static struct lp5523_led_config rx51_lp5523_led_config[] = { { + .name = "lp5523:kb1", .chan_nr = 0, .led_current = 50, }, { + .name = "lp5523:kb2", .chan_nr = 1, .led_current = 50, }, { + .name = "lp5523:kb3", .chan_nr = 2, .led_current = 50, }, { + .name = "lp5523:kb4", .chan_nr = 3, .led_current = 50, }, { + .name = "lp5523:b", .chan_nr = 4, .led_current = 50, }, { + .name = "lp5523:g", .chan_nr = 5, .led_current = 50, }, { + .name = "lp5523:r", .chan_nr = 6, .led_current = 50, }, { + .name = "lp5523:kb5", .chan_nr = 7, .led_current = 50, }, { + .name = "lp5523:kb6", .chan_nr = 8, .led_current = 50, } @@ -1253,6 +1262,16 @@ static void __init rx51_init_lirc(void) } #endif +static struct platform_device madc_hwmon = { + .name = "twl4030_madc_hwmon", + .id = -1, +}; + +static void __init rx51_init_twl4030_hwmon(void) +{ + platform_device_register(&madc_hwmon); +} + void __init rx51_peripherals_init(void) { rx51_i2c_init(); @@ -1272,5 +1291,6 @@ void __init rx51_peripherals_init(void) omap_hsmmc_init(mmc); rx51_charger_init(); + rx51_init_twl4030_hwmon(); } diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index dc5498b1b3a..cdc0c102186 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -20,6 +20,7 @@ #include <linux/wl12xx.h> #include <linux/mmc/host.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/omap-twl4030.h> #include <linux/usb/phy.h> #include <asm/mach-types.h> @@ -35,11 +36,9 @@ #include "common-board-devices.h" #define OMAP_ZOOM_WLAN_PMENA_GPIO (101) -#define ZOOM2_HEADSET_EXTMUTE_GPIO (153) +#define OMAP_ZOOM_TSC2004_IRQ_GPIO (153) #define OMAP_ZOOM_WLAN_IRQ_GPIO (162) -#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) - /* Zoom2 has Qwerty keyboard*/ static uint32_t board_keymap[] = { KEY(0, 0, KEY_E), @@ -227,22 +226,31 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct omap_tw4030_pdata omap_twl4030_audio_data = { + .voice_connected = true, + .custom_routing = true, + + .has_hs = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, + .has_hf = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, + + .has_mainmic = true, + .has_submic = true, + .has_hsmic = true, + .has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, +}; + static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int ret; - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap_hsmmc_late_init(mmc); - ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, - "lcd enable"); - if (ret) - pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n", - LCD_PANEL_ENABLE_GPIO); + /* Audio setup */ + omap_twl4030_audio_data.jack_detect = gpio + 2; + omap_twl4030_audio_init("Zoom2", &omap_twl4030_audio_data); - return ret; + return 0; } static struct twl4030_gpio_platform_data zoom_gpio_data = { @@ -265,14 +273,9 @@ static int __init omap_i2c_init(void) TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - if (machine_is_omap_zoom2()) { - struct twl4030_codec_data *codec_data; - codec_data = zoom_twldata.audio->codec; + if (machine_is_omap_zoom2()) + zoom_twldata.audio->codec->ramp_delay_value = 3; /* 161 ms */ - codec_data->ramp_delay_value = 3; /* 161 ms */ - codec_data->hs_extmute = 1; - codec_data->hs_extmute_gpio = ZOOM2_HEADSET_EXTMUTE_GPIO; - } omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 8d70bd03c5d..e4b16c8efe8 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -790,9 +790,6 @@ static int gpmc_mem_init(void) * even if we didn't boot from ROM. */ boot_rom_space = BOOT_ROM_SPACE; - /* In apollon the CS0 is mapped as 0x0000 0000 */ - if (machine_is_omap_apollon()) - boot_rom_space = 0; gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space; gpmc_mem_root.end = GPMC_MEM_END; diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 6a7aec6d117..51e138cc539 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -529,24 +529,29 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030_MODULE) #include <linux/platform_data/omap-twl4030.h> +/* Commonly used configuration */ static struct omap_tw4030_pdata omap_twl4030_audio_data; static struct platform_device audio_device = { .name = "omap-twl4030", .id = -1, - .dev = { - .platform_data = &omap_twl4030_audio_data, - }, }; -void __init omap_twl4030_audio_init(char *card_name) +void omap_twl4030_audio_init(char *card_name, + struct omap_tw4030_pdata *pdata) { - omap_twl4030_audio_data.card_name = card_name; + if (!pdata) + pdata = &omap_twl4030_audio_data; + + pdata->card_name = card_name; + + audio_device.dev.platform_data = pdata; platform_device_register(&audio_device); } #else /* SOC_OMAP_TWL4030 */ -void __init omap_twl4030_audio_init(char *card_name) +void omap_twl4030_audio_init(char *card_name, + struct omap_tw4030_pdata *pdata) { return; } diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index dcfbad5ac47..24b65d081b6 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -32,6 +32,7 @@ struct twl4030_platform_data; struct twl6040_platform_data; +struct omap_tw4030_pdata; struct i2c_board_info; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, @@ -60,6 +61,6 @@ void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); -void omap_twl4030_audio_init(char *card_name); +void omap_twl4030_audio_init(char *card_name, struct omap_tw4030_pdata *pdata); #endif /* __OMAP_PMIC_COMMON__ */ diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index a29849d181c..d82a50b4a80 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -167,7 +167,7 @@ static unsigned long centro685_pin_config[] __initdata = { /****************************************************************************** * GPIO keyboard ******************************************************************************/ -#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_PXA27x) static unsigned int treo680_matrix_keys[] = { KEY(0, 0, KEY_F8), /* Red/Off/Power */ KEY(0, 1, KEY_LEFT), @@ -315,7 +315,7 @@ static inline void palmtreo_kpc_init(void) {} /****************************************************************************** * USB host ******************************************************************************/ -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_OHCI_HCD) static struct pxaohci_platform_data treo680_ohci_info = { .port_mode = PMM_PERPORT_MODE, .flags = ENABLE_PORT1 | ENABLE_PORT3, @@ -397,6 +397,36 @@ static void __init palmtreo_leds_init(void) } /****************************************************************************** + * diskonchip docg4 flash + ******************************************************************************/ +#if defined(CONFIG_MACH_TREO680) +/* REVISIT: does the centro have this device also? */ +#if IS_ENABLED(CONFIG_MTD_NAND_DOCG4) +static struct resource docg4_resources[] = { + { + .start = 0x00000000, + .end = 0x00001FFF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device treo680_docg4_flash = { + .name = "docg4", + .id = -1, + .resource = docg4_resources, + .num_resources = ARRAY_SIZE(docg4_resources), +}; + +static void __init treo680_docg4_flash_init(void) +{ + platform_device_register(&treo680_docg4_flash); +} +#else +static inline void treo680_docg4_flash_init(void) {} +#endif +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static void __init treo_reserve(void) @@ -480,6 +510,7 @@ static void __init treo680_init(void) treo680_gpio_init(); palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY, GPIO_NR_TREO680_SD_POWER, 0); + treo680_docg4_flash_init(); } #endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 69985b06c0d..3203a9f5b4a 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -238,6 +238,7 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; #ifdef CONFIG_PM diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 705bc63c798..8ff53a19c48 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -479,11 +479,10 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) static int power_gpio = -EINVAL; if (power_gpio < 0) { - int ret = gpio_request(GPIO_PORT114, "sdhi1_power"); - if (!ret) { + int ret = gpio_request_one(GPIO_PORT114, GPIOF_OUT_INIT_LOW, + "sdhi1_power"); + if (!ret) power_gpio = GPIO_PORT114; - gpio_direction_output(power_gpio, 0); - } } /* @@ -604,14 +603,11 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_MMCD0_5_PU, NULL); gpio_request(GPIO_FN_MMCD0_6_PU, NULL); gpio_request(GPIO_FN_MMCD0_7_PU, NULL); - gpio_request(GPIO_PORT208, NULL); /* Reset */ - gpio_direction_output(GPIO_PORT208, 1); + gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */ /* enable SMSC911X */ - gpio_request(GPIO_PORT144, NULL); /* PINTA2 */ - gpio_direction_input(GPIO_PORT144); - gpio_request(GPIO_PORT145, NULL); /* RESET */ - gpio_direction_output(GPIO_PORT145, 1); + gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */ + gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */ /* FSI A */ gpio_request(GPIO_FN_FSIACK, NULL); @@ -626,15 +622,13 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL); /* LCD panel */ - gpio_request(GPIO_PORT217, NULL); /* RESET */ - gpio_direction_output(GPIO_PORT217, 0); + gpio_request_one(GPIO_PORT217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ mdelay(1); gpio_set_value(GPIO_PORT217, 1); mdelay(100); /* LCD backlight controller */ - gpio_request(GPIO_PORT235, NULL); /* RESET */ - gpio_direction_output(GPIO_PORT235, 0); + gpio_request_one(GPIO_PORT235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ lcd_backlight_set_brightness(0); /* enable SDHI0 on CN15 [SD I/F] */ diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 2928cd68680..38f1259a0da 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -143,6 +143,10 @@ * * SW41 : ON : SH-Mobile AP4 Audio Mode * : OFF : Bluetooth Audio Mode + * + * it needs amixer settings for playing + * + * amixer set "Headphone Enable" on */ /* @@ -1036,9 +1040,7 @@ static int ts_get_pendown_state(void) gpio_free(GPIO_TSC_IRQ); - gpio_request(GPIO_TSC_PORT, NULL); - - gpio_direction_input(GPIO_TSC_PORT); + gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL); val = gpio_get_value(GPIO_TSC_PORT); @@ -1119,18 +1121,10 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_IRQ6_39, NULL); /* enable Debug switch (S6) */ - gpio_request(GPIO_PORT32, NULL); - gpio_request(GPIO_PORT33, NULL); - gpio_request(GPIO_PORT34, NULL); - gpio_request(GPIO_PORT35, NULL); - gpio_direction_input(GPIO_PORT32); - gpio_direction_input(GPIO_PORT33); - gpio_direction_input(GPIO_PORT34); - gpio_direction_input(GPIO_PORT35); - gpio_export(GPIO_PORT32, 0); - gpio_export(GPIO_PORT33, 0); - gpio_export(GPIO_PORT34, 0); - gpio_export(GPIO_PORT35, 0); + gpio_request_one(GPIO_PORT32, GPIOF_IN | GPIOF_EXPORT, NULL); + gpio_request_one(GPIO_PORT33, GPIOF_IN | GPIOF_EXPORT, NULL); + gpio_request_one(GPIO_PORT34, GPIOF_IN | GPIOF_EXPORT, NULL); + gpio_request_one(GPIO_PORT35, GPIOF_IN | GPIOF_EXPORT, NULL); /* SDHI0 */ gpio_request(GPIO_FN_SDHICD0, NULL); @@ -1178,8 +1172,7 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_FSIAILR, NULL); gpio_request(GPIO_FN_FSIAISLD, NULL); gpio_request(GPIO_FN_FSIAOSLD, NULL); - gpio_request(GPIO_PORT161, NULL); - gpio_direction_output(GPIO_PORT161, 0); /* slave */ + gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ gpio_request(GPIO_PORT9, NULL); gpio_request(GPIO_PORT10, NULL); @@ -1187,8 +1180,7 @@ static void __init ap4evb_init(void) gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */ /* card detect pin for MMC slot (CN7) */ - gpio_request(GPIO_PORT41, NULL); - gpio_direction_input(GPIO_PORT41); + gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL); /* setup FSI2 port B (HDMI) */ gpio_request(GPIO_FN_FSIBCK, NULL); @@ -1276,11 +1268,8 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_LCDDISP, NULL); gpio_request(GPIO_FN_LCDDCK, NULL); - gpio_request(GPIO_PORT189, NULL); /* backlight */ - gpio_direction_output(GPIO_PORT189, 1); - - gpio_request(GPIO_PORT151, NULL); /* LCDDON */ - gpio_direction_output(GPIO_PORT151, 1); + gpio_request_one(GPIO_PORT189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */ + gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ lcdc_info.clock_source = LCDC_CLK_BUS; lcdc_info.ch[0].interface_type = RGB18; diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 81d91fda2d9..f2ec0777cfb 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -124,6 +124,14 @@ * this command is required when playback. * * # amixer set "Headphone" 50 + * + * this command is required when capture. + * + * # amixer set "Input PGA" 15 + * # amixer set "Left Input Mixer MicP" on + * # amixer set "Left Input Mixer MicN" on + * # amixer set "Right Input Mixer MicN" on + * # amixer set "Right Input Mixer MicP" on */ /* @@ -700,9 +708,9 @@ static int mt9t111_power(struct device *dev, int mode) /* video1 (= CON1 camera) expect 24MHz */ clk_set_rate(mclk, clk_round_rate(mclk, 24000000)); clk_enable(mclk); - gpio_direction_output(GPIO_PORT158, 1); + gpio_set_value(GPIO_PORT158, 1); } else { - gpio_direction_output(GPIO_PORT158, 0); + gpio_set_value(GPIO_PORT158, 0); clk_disable(mclk); } @@ -992,16 +1000,12 @@ static void __init eva_init(void) gpio_request(GPIO_FN_LCD0_DISP, NULL); gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL); - gpio_request(GPIO_PORT61, NULL); /* LCDDON */ - gpio_direction_output(GPIO_PORT61, 1); - - gpio_request(GPIO_PORT202, NULL); /* LCD0_LED_CONT */ - gpio_direction_output(GPIO_PORT202, 0); + gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ + gpio_request_one(GPIO_PORT202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ /* Touchscreen */ gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */ - gpio_request(GPIO_PORT166, NULL); /* TP_RST_B */ - gpio_direction_output(GPIO_PORT166, 1); + gpio_request_one(GPIO_PORT166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ /* GETHER */ gpio_request(GPIO_FN_ET_CRS, NULL); @@ -1024,12 +1028,10 @@ static void __init eva_init(void) gpio_request(GPIO_FN_ET_RX_DV, NULL); gpio_request(GPIO_FN_ET_RX_CLK, NULL); - gpio_request(GPIO_PORT18, NULL); /* PHY_RST */ - gpio_direction_output(GPIO_PORT18, 1); + gpio_request_one(GPIO_PORT18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ /* USB */ - gpio_request(GPIO_PORT159, NULL); /* USB_DEVICE_MODE */ - gpio_direction_input(GPIO_PORT159); + gpio_request_one(GPIO_PORT159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */ if (gpio_get_value(GPIO_PORT159)) { /* USB Host */ @@ -1043,8 +1045,7 @@ static void __init eva_init(void) * and select GPIO_PORT209 here */ gpio_request(GPIO_FN_IRQ7_PORT209, NULL); - gpio_request(GPIO_PORT209, NULL); - gpio_direction_input(GPIO_PORT209); + gpio_request_one(GPIO_PORT209, GPIOF_IN, NULL); platform_device_register(&usbhsf_device); usb = &usbhsf_device; @@ -1059,12 +1060,9 @@ static void __init eva_init(void) gpio_request(GPIO_FN_SDHI0_D3, NULL); gpio_request(GPIO_FN_SDHI0_WP, NULL); - gpio_request(GPIO_PORT17, NULL); /* SDHI0_18/33_B */ - gpio_request(GPIO_PORT74, NULL); /* SDHI0_PON */ - gpio_request(GPIO_PORT75, NULL); /* SDSLOT1_PON */ - gpio_direction_output(GPIO_PORT17, 0); - gpio_direction_output(GPIO_PORT74, 1); - gpio_direction_output(GPIO_PORT75, 1); + gpio_request_one(GPIO_PORT17, GPIOF_OUT_INIT_LOW, NULL); /* SDHI0_18/33_B */ + gpio_request_one(GPIO_PORT74, GPIOF_OUT_INIT_HIGH, NULL); /* SDHI0_PON */ + gpio_request_one(GPIO_PORT75, GPIOF_OUT_INIT_HIGH, NULL); /* SDSLOT1_PON */ /* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */ @@ -1101,12 +1099,10 @@ static void __init eva_init(void) gpio_request(GPIO_FN_VIO_CKO, NULL); /* CON1/CON15 Camera */ - gpio_request(GPIO_PORT173, NULL); /* STANDBY */ - gpio_request(GPIO_PORT172, NULL); /* RST */ - gpio_request(GPIO_PORT158, NULL); /* CAM_PON */ - gpio_direction_output(GPIO_PORT173, 0); - gpio_direction_output(GPIO_PORT172, 1); - gpio_direction_output(GPIO_PORT158, 0); /* see mt9t111_power() */ + gpio_request_one(GPIO_PORT173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */ + gpio_request_one(GPIO_PORT172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */ + /* see mt9t111_power() */ + gpio_request_one(GPIO_PORT158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */ /* FSI-WM8978 */ gpio_request(GPIO_FN_FSIAIBT, NULL); @@ -1133,15 +1129,13 @@ static void __init eva_init(void) * DBGMD/LCDC0/FSIA MUX * DBGMD_SELECT_B should be set after setting PFC Function. */ - gpio_request(GPIO_PORT176, NULL); - gpio_direction_output(GPIO_PORT176, 1); + gpio_request_one(GPIO_PORT176, GPIOF_OUT_INIT_HIGH, NULL); /* * We can switch CON8/CON14 by SW1.5, * but it needs after DBGMD_SELECT_B */ - gpio_request(GPIO_PORT6, NULL); - gpio_direction_input(GPIO_PORT6); + gpio_request_one(GPIO_PORT6, GPIOF_IN, NULL); if (gpio_get_value(GPIO_PORT6)) { /* CON14 enable */ } else { @@ -1155,8 +1149,8 @@ static void __init eva_init(void) gpio_request(GPIO_FN_SDHI1_CD, NULL); gpio_request(GPIO_FN_SDHI1_WP, NULL); - gpio_request(GPIO_PORT16, NULL); /* SDSLOT2_PON */ - gpio_direction_output(GPIO_PORT16, 1); + /* SDSLOT2_PON */ + gpio_request_one(GPIO_PORT16, GPIOF_OUT_INIT_HIGH, NULL); platform_device_register(&sdhi1_device); } @@ -1175,8 +1169,6 @@ static void __init eva_init(void) platform_add_devices(eva_devices, ARRAY_SIZE(eva_devices)); - eva_clock_init(); - rmobile_add_device_to_domain("A4LC", &lcdc0_device); rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device); if (usb) @@ -1189,6 +1181,9 @@ static void __init eva_earlytimer_init(void) { r8a7740_clock_init(MD_CK0 | MD_CK2); shmobile_earlytimer_init(); + + /* the rate of extal1 clock must be set before late_time_init */ + eva_clock_init(); } static void __init eva_add_early_devices(void) diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c index 331b7ce4edd..e50f8669153 100644 --- a/arch/arm/mach-shmobile/board-bonito.c +++ b/arch/arm/mach-shmobile/board-bonito.c @@ -392,8 +392,7 @@ static void __init bonito_init(void) /* * base board settings */ - gpio_request(GPIO_PORT176, NULL); - gpio_direction_input(GPIO_PORT176); + gpio_request_one(GPIO_PORT176, GPIOF_IN, NULL); if (!gpio_get_value(GPIO_PORT176)) { u16 bsw2; u16 bsw3; @@ -462,8 +461,8 @@ static void __init bonito_init(void) gpio_request(GPIO_FN_LCD0_DISP, NULL); gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL); - gpio_request(GPIO_PORT61, NULL); /* LCDDON */ - gpio_direction_output(GPIO_PORT61, 1); + gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH, + NULL); /* LCDDON */ /* backlight on */ bonito_fpga_write(LCDCR, 1); diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index d759a9c2b9e..2ccc860403e 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -474,10 +474,8 @@ static void __init kota2_init(void) gpio_request(GPIO_FN_D15_NAF15, NULL); gpio_request(GPIO_FN_CS5A_, NULL); gpio_request(GPIO_FN_WE0__FWE, NULL); - gpio_request(GPIO_PORT144, NULL); /* PINTA2 */ - gpio_direction_input(GPIO_PORT144); - gpio_request(GPIO_PORT145, NULL); /* RESET */ - gpio_direction_output(GPIO_PORT145, 1); + gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */ + gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */ /* KEYSC */ gpio_request(GPIO_FN_KEYIN0_PU, NULL); @@ -509,8 +507,7 @@ static void __init kota2_init(void) gpio_request(GPIO_FN_MMCD0_6, NULL); gpio_request(GPIO_FN_MMCD0_7, NULL); gpio_request(GPIO_FN_MMCCMD0, NULL); - gpio_request(GPIO_PORT208, NULL); /* Reset */ - gpio_direction_output(GPIO_PORT208, 1); + gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */ /* SDHI0 (microSD) */ gpio_request(GPIO_FN_SDHICD0_PU, NULL); diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 3efff2e7b1e..7f3a6b7e7b7 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -623,7 +623,7 @@ static int __init as3711_enable_lcdc_backlight(void) 0x45, 0xf0, }; - if (!machine_is_kzm9g()) + if (!of_machine_is_compatible("renesas,kzm9g")) return 0; if (!a) @@ -672,8 +672,7 @@ static void __init kzm_init(void) gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */ /* SMSC */ - gpio_request(GPIO_PORT224, NULL); /* IRQ3 */ - gpio_direction_input(GPIO_PORT224); + gpio_request_one(GPIO_PORT224, GPIOF_IN, NULL); /* IRQ3 */ /* LCDC */ gpio_request(GPIO_FN_LCDD23, NULL); @@ -703,14 +702,11 @@ static void __init kzm_init(void) gpio_request(GPIO_FN_LCDDISP, NULL); gpio_request(GPIO_FN_LCDDCK, NULL); - gpio_request(GPIO_PORT222, NULL); /* LCDCDON */ - gpio_request(GPIO_PORT226, NULL); /* SC */ - gpio_direction_output(GPIO_PORT222, 1); - gpio_direction_output(GPIO_PORT226, 1); + gpio_request_one(GPIO_PORT222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */ + gpio_request_one(GPIO_PORT226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */ /* Touchscreen */ - gpio_request(GPIO_PORT223, NULL); /* IRQ8 */ - gpio_direction_input(GPIO_PORT223); + gpio_request_one(GPIO_PORT223, GPIOF_IN, NULL); /* IRQ8 */ /* enable MMCIF */ gpio_request(GPIO_FN_MMCCLK0, NULL); @@ -734,8 +730,7 @@ static void __init kzm_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); - gpio_request(GPIO_PORT15, NULL); - gpio_direction_output(GPIO_PORT15, 1); /* power */ + gpio_request_one(GPIO_PORT15, GPIOF_OUT_INIT_HIGH, NULL); /* power */ /* enable Micro SD */ gpio_request(GPIO_FN_SDHID2_0, NULL); @@ -744,8 +739,7 @@ static void __init kzm_init(void) gpio_request(GPIO_FN_SDHID2_3, NULL); gpio_request(GPIO_FN_SDHICMD2, NULL); gpio_request(GPIO_FN_SDHICLK2, NULL); - gpio_request(GPIO_PORT14, NULL); - gpio_direction_output(GPIO_PORT14, 1); /* power */ + gpio_request_one(GPIO_PORT14, GPIOF_OUT_INIT_HIGH, NULL); /* power */ /* I2C 3 */ gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL); diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index e2fafca9432..db968a585ff 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -202,9 +202,7 @@ * * it needs amixer settings for playing * - * amixer set "Headphone" on - * amixer set "HPOUTL Mixer DACH" on - * amixer set "HPOUTR Mixer DACH" on + * amixer set "Headphone Enable" on */ /* Fixed 3.3V and 1.8V regulators to be used by multiple devices */ @@ -1404,11 +1402,10 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_LCDDISP, NULL); gpio_request(GPIO_FN_LCDDCK, NULL); - gpio_request(GPIO_PORT31, NULL); /* backlight */ - gpio_direction_output(GPIO_PORT31, 0); /* off by default */ + /* backlight, off by default */ + gpio_request_one(GPIO_PORT31, GPIOF_OUT_INIT_LOW, NULL); - gpio_request(GPIO_PORT151, NULL); /* LCDDON */ - gpio_direction_output(GPIO_PORT151, 1); + gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ /* USBHS0 */ gpio_request(GPIO_FN_VBUS0_0, NULL); @@ -1424,8 +1421,7 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_FSIAILR, NULL); gpio_request(GPIO_FN_FSIAISLD, NULL); gpio_request(GPIO_FN_FSIAOSLD, NULL); - gpio_request(GPIO_PORT161, NULL); - gpio_direction_output(GPIO_PORT161, 0); /* slave */ + gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ gpio_request(GPIO_PORT9, NULL); gpio_request(GPIO_PORT10, NULL); @@ -1479,8 +1475,7 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID1_0, NULL); #endif /* card detect pin for MMC slot (CN7) */ - gpio_request(GPIO_PORT41, NULL); - gpio_direction_input(GPIO_PORT41); + gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL); /* enable SDHI2 */ gpio_request(GPIO_FN_SDHICMD2, NULL); @@ -1491,8 +1486,7 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID2_0, NULL); /* card detect pin for microSD slot (CN23) */ - gpio_request(GPIO_PORT162, NULL); - gpio_direction_input(GPIO_PORT162); + gpio_request_one(GPIO_PORT162, GPIOF_IN, NULL); /* MMCIF */ gpio_request(GPIO_FN_MMCD0_0, NULL); |