diff options
| author | Fabio Estevam <fabio.estevam@freescale.com> | 2012-12-24 16:01:39 -0200 |
|---|---|---|
| committer | Shawn Guo <shawn.guo@linaro.org> | 2012-12-25 22:17:59 +0800 |
| commit | 664e9e495a3ada96ed2ebab89edb40c4fc132bd7 (patch) | |
| tree | 0728b3684a93c9ca1a70bf0fce9b99a0acb917b9 /arch/arm | |
| parent | a49f0d1ea3ec94fc7cf33a7c36a16343b74bd565 (diff) | |
ARM: dts: imx23-olinuxino: Fix IOMUX settings
On the imx23-olinuxino board GPIO2_1 is connected to the LED and GPIO0_17
is the USB PHY reset.
So make the IOMUX assignment properly.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/imx23-olinuxino.dts | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 7c43b8e70b9..e7484e4ea65 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -39,17 +39,17 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; - led_pin_gpio0_17: led_gpio0_17@0 { + led_pin_gpio2_1: led_gpio2_1@0 { reg = <0>; fsl,pinmux-ids = < - 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ + 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -110,7 +110,7 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pin_gpio0_17>; + pinctrl-0 = <&led_pin_gpio2_1>; user { label = "green"; |