Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux

Pull common clk framework changes from Michael Turquette:
 "This includes a small number of core framework improvments, platform
  ports and new DT bindings."

Fix up trivial conflicts in drivers/clk/Makefile

* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (21 commits)
  clk: fix compile for OF && !COMMON_CLK
  clk: fix clk_get on of_clk_get_by_name return check
  clk: mxs: clk_register_clkdev mx28 usb clocks
  clk: add highbank clock support
  dt: add clock binding doc to primecell bindings
  clk: add DT fixed-clock binding support
  clk: add DT clock binding support
  ARM: integrator: convert to common clock
  clk: add versatile ICST307 driver
  ARM: integrator: put symbolic bus names on devices
  ARM: u300: convert to common clock
  clk: cache parent clocks only for muxes
  clk: wm831x: Add initial WM831x clock driver
  clk: Constify struct clk_init_data
  clk: Add CLK_IS_BASIC flag to identify basic clocks
  clk: Add support for rate table based dividers
  clk: Add support for power of two type dividers
  clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3
  clk: mxs: add clkdev lookup for pwm
  clk: mxs: Fix the GPMI clock name
  ...

14 files changed, 133 insertions, 1774 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c7e6d208fa8..b25c9d3c379 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -273,8 +273,8 @@ config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
 	select ARCH_HAS_CPUFREQ
-	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
+	select COMMON_CLK
+	select CLK_VERSATILE
 	select HAVE_TCM
 	select ICST
 	select GENERIC_CLOCKEVENTS
@@ -336,6 +336,7 @@ config ARCH_VEXPRESS
 	select ICST
 	select NO_IOPORT
 	select PLAT_VERSATILE
+	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_CLCD
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
@@ -372,6 +373,7 @@ config ARCH_HIGHBANK
 	select ARM_TIMER_SP804
 	select CACHE_L2X0
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
@@ -929,7 +931,7 @@ config ARCH_U300
 	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
+	select COMMON_CLK
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 83e72294aef..2e1cfa00c25 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Calxeda, Inc.
+ * Copyright 2011-2012 Calxeda, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -24,6 +24,7 @@
 	compatible = "calxeda,highbank";
 	#address-cells = <1>;
 	#size-cells = <1>;
+	clock-ranges;
 
 	cpus {
 		#address-cells = <1>;
@@ -33,24 +34,32 @@
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
 		};
 
 		cpu@1 {
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
 		};
 
 		cpu@2 {
 			compatible = "arm,cortex-a9";
 			reg = <2>;
 			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
 		};
 
 		cpu@3 {
 			compatible = "arm,cortex-a9";
 			reg = <3>;
 			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
 		};
 	};
 
@@ -75,12 +84,14 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xfff10600 0x20>;
 			interrupts = <1 13 0xf01>;
+			clocks = <&a9periphclk>;
 		};
 
 		watchdog@fff10620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0xfff10620 0x20>;
 			interrupts = <1 14 0xf01>;
+			clocks = <&a9periphclk>;
 		};
 
 		intc: interrupt-controller@fff11000 {
@@ -116,12 +127,15 @@
 			compatible = "calxeda,hb-sdhci";
 			reg = <0xffe0e000 0x1000>;
 			interrupts = <0 90 4>;
+			clocks = <&eclk>;
 		};
 
 		ipc@fff20000 {
 			compatible = "arm,pl320", "arm,primecell";
 			reg = <0xfff20000 0x1000>;
 			interrupts = <0 7 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpioe: gpio@fff30000 {
@@ -130,6 +144,8 @@
 			gpio-controller;
 			reg = <0xfff30000 0x1000>;
 			interrupts = <0 14 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpiof: gpio@fff31000 {
@@ -138,6 +154,8 @@
 			gpio-controller;
 			reg = <0xfff31000 0x1000>;
 			interrupts = <0 15 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpiog: gpio@fff32000 {
@@ -146,6 +164,8 @@
 			gpio-controller;
 			reg = <0xfff32000 0x1000>;
 			interrupts = <0 16 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpioh: gpio@fff33000 {
@@ -154,24 +174,32 @@
 			gpio-controller;
 			reg = <0xfff33000 0x1000>;
 			interrupts = <0 17 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		timer {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0xfff34000 0x1000>;
 			interrupts = <0 18 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		rtc@fff35000 {
 			compatible = "arm,pl031", "arm,primecell";
 			reg = <0xfff35000 0x1000>;
 			interrupts = <0 19 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		serial@fff36000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xfff36000 0x1000>;
 			interrupts = <0 20 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		smic@fff3a000 {
@@ -186,12 +214,73 @@
 		sregs@fff3c000 {
 			compatible = "calxeda,hb-sregs";
 			reg = <0xfff3c000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				osc: oscillator {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <33333000>;
+				};
+
+				ddrpll: ddrpll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x108>;
+				};
+
+				a9pll: a9pll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x100>;
+				};
+
+				a9periphclk: a9periphclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-a9periph-clock";
+					clocks = <&a9pll>;
+					reg = <0x104>;
+				};
+
+				a9bclk: a9bclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-a9bus-clock";
+					clocks = <&a9pll>;
+					reg = <0x104>;
+				};
+
+				emmcpll: emmcpll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x10C>;
+				};
+
+				eclk: eclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-emmc-clock";
+					clocks = <&emmcpll>;
+					reg = <0x114>;
+				};
+
+				pclk: pclk {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <150000000>;
+				};
+			};
 		};
 
 		dma@fff3d000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xfff3d000 0x1000>;
 			interrupts = <0 92 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		ethernet@fff50000 {
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index ded4652ada8..3ec8bdd25d0 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -1,4 +1,4 @@
-obj-y					:= clock.o highbank.o system.o smc.o
+obj-y					:= highbank.o system.o smc.o
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-highbank/clock.c b/arch/arm/mach-highbank/clock.c
deleted file mode 100644
index c25a2ae4fde..00000000000
--- a/arch/arm/mach-highbank/clock.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-
-struct clk {
-	unsigned long rate;
-};
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-
-void clk_disable(struct clk *clk)
-{}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	return 0;
-}
-
-static struct clk eclk = { .rate = 200000000 };
-static struct clk pclk = { .rate = 150000000 };
-
-static struct clk_lookup lookups[] = {
-	{ .clk = &pclk, .con_id = "apb_pclk", },
-	{ .clk = &pclk, .dev_id = "sp804", },
-	{ .clk = &eclk, .dev_id = "ffe0e000.sdhci", },
-	{ .clk = &pclk, .dev_id = "fff36000.serial", },
-};
-
-void __init highbank_clocks_init(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 8777612b1a4..d75b0a78d88 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -105,6 +105,11 @@ static void __init highbank_init_irq(void)
 #endif
 }
 
+static struct clk_lookup lookup = {
+	.dev_id = "sp804",
+	.con_id = NULL,
+};
+
 static void __init highbank_timer_init(void)
 {
 	int irq;
@@ -122,6 +127,8 @@ static void __init highbank_timer_init(void)
 	irq = irq_of_parse_and_map(np, 0);
 
 	highbank_clocks_init();
+	lookup.clk = of_clk_get(np, 0);
+	clkdev_add(&lookup);
 
 	sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
 	sp804_clockevents_init(timer_base, irq, "timer0");
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index eaf6c6366ff..ebf680bebdf 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -21,7 +21,6 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 #include <linux/io.h>
-#include <linux/clkdev.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -41,17 +40,17 @@ static struct amba_pl010_data integrator_uart_data;
 #define KMI0_IRQ		{ IRQ_KMIINT0 }
 #define KMI1_IRQ		{ IRQ_KMIINT1 }
 
-static AMBA_APB_DEVICE(rtc, "mb:15", 0,
+static AMBA_APB_DEVICE(rtc, "rtc", 0,
 	INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
 
-static AMBA_APB_DEVICE(uart0, "mb:16", 0,
+static AMBA_APB_DEVICE(uart0, "uart0", 0,
 	INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
 
-static AMBA_APB_DEVICE(uart1, "mb:17", 0,
+static AMBA_APB_DEVICE(uart1, "uart1", 0,
 	INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
 
-static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
-static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&rtc_device,
@@ -61,50 +60,6 @@ static struct amba_device *amba_devs[] __initdata = {
 	&kmi1_device,
 };
 
-/*
- * These are fixed clocks.
- */
-static struct clk clk24mhz = {
-	.rate	= 24000000,
-};
-
-static struct clk uartclk = {
-	.rate	= 14745600,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
-	{	/* Bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {
-		/* Integrator/AP timer frequency */
-		.dev_id		= "ap_timer",
-		.clk		= &clk24mhz,
-	}, {	/* UART0 */
-		.dev_id		= "mb:16",
-		.clk		= &uartclk,
-	}, {	/* UART1 */
-		.dev_id		= "mb:17",
-		.clk		= &uartclk,
-	}, {	/* KMI0 */
-		.dev_id		= "mb:18",
-		.clk		= &clk24mhz,
-	}, {	/* KMI1 */
-		.dev_id		= "mb:19",
-		.clk		= &clk24mhz,
-	}, {	/* MMCI - IntegratorCP */
-		.dev_id		= "mb:1c",
-		.clk		= &uartclk,
-	}
-};
-
-void __init integrator_init_early(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
-
 static int __init integrator_init(void)
 {
 	int i;
diff --git a/arch/arm/mach-integrator/include/mach/clkdev.h b/arch/arm/mach-integrator/include/mach/clkdev.h
deleted file mode 100644
index bfe07679fae..00000000000
--- a/arch/arm/mach-integrator/include/mach/clkdev.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <linux/module.h>
-#include <plat/clock.h>
-
-struct clk {
-	unsigned long		rate;
-	const struct clk_ops	*ops;
-	struct module		*owner;
-	const struct icst_params *params;
-	void __iomem		*vcoreg;
-	void			*data;
-};
-
-static inline int __clk_get(struct clk *clk)
-{
-	return try_module_get(clk->owner);
-}
-
-static inline void __clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index c857501c578..7b1055c8e0b 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -33,6 +33,7 @@
 #include <linux/io.h>
 #include <linux/mtd/physmap.h>
 #include <linux/clk.h>
+#include <linux/platform_data/clk-integrator.h>
 #include <video/vga.h>
 
 #include <mach/hardware.h>
@@ -174,6 +175,7 @@ static void __init ap_init_irq(void)
 
 	fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
 		-1, INTEGRATOR_SC_VALID_INT, NULL);
+	integrator_clk_init(false);
 }
 
 #ifdef CONFIG_PM
@@ -440,6 +442,10 @@ static void integrator_clockevent_init(unsigned long inrate)
 					0xffffU);
 }
 
+void __init ap_init_early(void)
+{
+}
+
 /*
  * Set up timer(s).
  */
@@ -471,7 +477,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	.reserve	= integrator_reserve,
 	.map_io		= ap_map_io,
 	.nr_irqs	= NR_IRQS_INTEGRATOR_AP,
-	.init_early	= integrator_init_early,
+	.init_early	= ap_init_early,
 	.init_irq	= ap_init_irq,
 	.handle_irq	= fpga_handle_irq,
 	.timer		= &ap_timer,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a56c5360893..82d5c837cc7 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -21,8 +21,8 @@
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
 #include <linux/gfp.h>
-#include <linux/clkdev.h>
 #include <linux/mtd/physmap.h>
+#include <linux/platform_data/clk-integrator.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -171,65 +171,10 @@ static void __init intcp_init_irq(void)
 
 	fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
 		      IRQ_CP_CPPLDINT, sic_mask, NULL);
+	integrator_clk_init(true);
 }
 
 /*
- * Clock handling
- */
-#define CM_LOCK		(__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
-#define CM_AUXOSC	(__io_address(INTEGRATOR_HDR_BASE)+0x1c)
-
-static const struct icst_params cp_auxvco_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min 	= 8,
-	.vd_max 	= 263,
-	.rd_min 	= 3,
-	.rd_max 	= 65,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-static void cp_auxvco_set(struct clk *clk, struct icst_vco vco)
-{
-	u32 val;
-
-	val = readl(clk->vcoreg) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, CM_LOCK);
-	writel(val, clk->vcoreg);
-	writel(0, CM_LOCK);
-}
-
-static const struct clk_ops cp_auxclk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= cp_auxvco_set,
-};
-
-static struct clk cp_auxclk = {
-	.ops	= &cp_auxclk_ops,
-	.params	= &cp_auxvco_params,
-	.vcoreg	= CM_AUXOSC,
-};
-
-static struct clk sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk_lookup cp_lookups[] = {
-	{	/* CLCD */
-		.dev_id		= "mb:c0",
-		.clk		= &cp_auxclk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.clk		= &sp804_clk,
-	},
-};
-
-/*
  * Flash handling.
  */
 static int intcp_flash_init(struct platform_device *dev)
@@ -336,10 +281,10 @@ static struct mmci_platform_data mmc_data = {
 #define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
 #define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
 
-static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
+static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
 	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
 
-static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
+static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
 	INTEGRATOR_CP_AACI_IRQS, NULL);
 
 
@@ -393,7 +338,7 @@ static struct clcd_board clcd_data = {
 	.remove		= versatile_clcd_remove_dma,
 };
 
-static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
+static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
 	{ IRQ_CP_CLCDCINT }, &clcd_data);
 
 static struct amba_device *amba_devs[] __initdata = {
@@ -406,10 +351,6 @@ static struct amba_device *amba_devs[] __initdata = {
 
 static void __init intcp_init_early(void)
 {
-	clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups));
-
-	integrator_init_early();
-
 #ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK
 	versatile_sched_clock_init(REFCOUNTER, 24000000);
 #endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index fd3a5c382f4..7e47d37aeb0 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel, U300 machine.
 #
 
-obj-y		:= core.o clock.o timer.o
+obj-y		:= core.o timer.o
 obj-m		:=
 obj-n		:=
 obj-		:=
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
deleted file mode 100644
index 5535dd0a78c..00000000000
--- a/arch/arm/mach-u300/clock.c
+++ /dev/null
@@ -1,1504 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/clock.c
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Define clocks in the app platform.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/debugfs.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/seq_file.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/syscon.h>
-
-#include "clock.h"
-
-/*
- * TODO:
- * - move all handling of the CCR register into this file and create
- *   a spinlock for the CCR register
- * - switch to the clkdevice lookup mechanism that maps clocks to
- *   device ID:s instead when it becomes available in kernel 2.6.29.
- * - implement rate get/set for all clocks that need it.
- */
-
-/*
- * Syscon clock I/O registers lock so clock requests don't collide
- * NOTE: this is a local lock only used to lock access to clock and
- * reset registers in syscon.
- */
-static DEFINE_SPINLOCK(syscon_clkreg_lock);
-static DEFINE_SPINLOCK(syscon_resetreg_lock);
-
-/*
- * The clocking hierarchy currently looks like this.
- * NOTE: the idea is NOT to show how the clocks are routed on the chip!
- * The ideas is to show dependencies, so a clock higher up in the
- * hierarchy has to be on in order for another clock to be on. Now,
- * both CPU and DMA can actually be on top of the hierarchy, and that
- * is not modeled currently. Instead we have the backbone AMBA bus on
- * top. This bus cannot be programmed in any way but conceptually it
- * needs to be active for the bridges and devices to transport data.
- *
- * Please be aware that a few clocks are hw controlled, which mean that
- * the hw itself can turn on/off or change the rate of the clock when
- * needed!
- *
- *  AMBA bus
- *  |
- *  +- CPU
- *  +- FSMC NANDIF NAND Flash interface
- *  +- SEMI Shared Memory interface
- *  +- ISP Image Signal Processor (U335 only)
- *  +- CDS (U335 only)
- *  +- DMA Direct Memory Access Controller
- *  +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
- *  +- APEX
- *  +- VIDEO_ENC AVE2/3 Video Encoder
- *  +- XGAM Graphics Accelerator Controller
- *  +- AHB
- *  |
- *  +- ahb:0 AHB Bridge
- *  |  |
- *  |  +- ahb:1 INTCON Interrupt controller
- *  |  +- ahb:3 MSPRO  Memory Stick Pro controller
- *  |  +- ahb:4 EMIF   External Memory interface
- *  |
- *  +- fast:0 FAST bridge
- *  |  |
- *  |  +- fast:1 MMCSD MMC/SD card reader controller
- *  |  +- fast:2 I2S0  PCM I2S channel 0 controller
- *  |  +- fast:3 I2S1  PCM I2S channel 1 controller
- *  |  +- fast:4 I2C0  I2C channel 0 controller
- *  |  +- fast:5 I2C1  I2C channel 1 controller
- *  |  +- fast:6 SPI   SPI controller
- *  |  +- fast:7 UART1 Secondary UART (U335 only)
- *  |
- *  +- slow:0 SLOW bridge
- *     |
- *     +- slow:1 SYSCON (not possible to control)
- *     +- slow:2 WDOG Watchdog
- *     +- slow:3 UART0 primary UART
- *     +- slow:4 TIMER_APP Application timer - used in Linux
- *     +- slow:5 KEYPAD controller
- *     +- slow:6 GPIO controller
- *     +- slow:7 RTC controller
- *     +- slow:8 BT Bus Tracer (not used currently)
- *     +- slow:9 EH Event Handler (not used currently)
- *     +- slow:a TIMER_ACC Access style timer (not used currently)
- *     +- slow:b PPM (U335 only, what is that?)
- */
-
-/*
- * Reset control functions. We remember if a block has been
- * taken out of reset and don't remove the reset assertion again
- * and vice versa. Currently we only remove resets so the
- * enablement function is defined out.
- */
-static void syscon_block_reset_enable(struct clk *clk)
-{
-	u16 val;
-	unsigned long iflags;
-
-	/* Not all blocks support resetting */
-	if (!clk->res_reg || !clk->res_mask)
-		return;
-	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
-	val = readw(clk->res_reg);
-	val |= clk->res_mask;
-	writew(val, clk->res_reg);
-	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
-	clk->reset = true;
-}
-
-static void syscon_block_reset_disable(struct clk *clk)
-{
-	u16 val;
-	unsigned long iflags;
-
-	/* Not all blocks support resetting */
-	if (!clk->res_reg || !clk->res_mask)
-		return;
-	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
-	val = readw(clk->res_reg);
-	val &= ~clk->res_mask;
-	writew(val, clk->res_reg);
-	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
-	clk->reset = false;
-}
-
-int __clk_get(struct clk *clk)
-{
-	u16 val;
-
-	/* The MMC and MSPRO clocks need some special set-up */
-	if (!strcmp(clk->name, "MCLK")) {
-		/* Set default MMC clock divisor to 18.9 MHz */
-		writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
-		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-		/* Disable the MMC feedback clock */
-		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
-		/* Disable MSPRO frequency */
-		val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
-		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-	}
-	if (!strcmp(clk->name, "MSPRO")) {
-		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-		/* Disable the MMC feedback clock */
-		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
-		/* Enable MSPRO frequency */
-		val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
-		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-	}
-	return 1;
-}
-EXPORT_SYMBOL(__clk_get);
-
-void __clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(__clk_put);
-
-static void syscon_clk_disable(struct clk *clk)
-{
-	unsigned long iflags;
-
-	/* Don't touch the hardware controlled clocks */
-	if (clk->hw_ctrld)
-		return;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void syscon_clk_enable(struct clk *clk)
-{
-	unsigned long iflags;
-
-	/* Don't touch the hardware controlled clocks */
-	if (clk->hw_ctrld)
-		return;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static u16 syscon_clk_get_rate(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-	return val;
-}
-
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-static void enable_i2s0_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Set I2S0 to use the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void enable_i2s1_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Set I2S1 to use the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void disable_i2s0_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Disable I2S0 use of the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Deactivate VCXO if no one else is using VCXO */
-	if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
-		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void disable_i2s1_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Disable I2S1 use of the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Deactivate VCXO if no one else is using VCXO */
-	if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
-		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
-
-
-static void syscon_clk_rate_set_mclk(unsigned long rate)
-{
-	u16 val;
-	u32 reg;
-	unsigned long iflags;
-
-	switch (rate) {
-	case 18900000:
-		val = 0x0054;
-		break;
-	case 20800000:
-		val = 0x0044;
-		break;
-	case 23100000:
-		val = 0x0043;
-		break;
-	case 26000000:
-		val = 0x0033;
-		break;
-	case 29700000:
-		val = 0x0032;
-		break;
-	case 34700000:
-		val = 0x0022;
-		break;
-	case 41600000:
-		val = 0x0021;
-		break;
-	case 52000000:
-		val = 0x0011;
-		break;
-	case 104000000:
-		val = 0x0000;
-		break;
-	default:
-		printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n",
-		       rate);
-		return;
-	}
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
-		~U300_SYSCON_MMF0R_MASK;
-	writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-void syscon_clk_rate_set_cpuclk(unsigned long rate)
-{
-	u16 val;
-	unsigned long iflags;
-
-	switch (rate) {
-	case 13000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
-		break;
-	case 52000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
-		break;
-	case 104000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
-		break;
-	case 208000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
-		break;
-	default:
-		return;
-	}
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) &
-		~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long iflags;
-
-	spin_lock_irqsave(&clk->lock, iflags);
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		/* some blocks lack clocking registers and cannot be disabled */
-		if (clk->disable)
-			clk->disable(clk);
-		if (likely((u32)clk->parent))
-			clk_disable(clk->parent);
-	}
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-	if (unlikely(!strcmp(clk->name, "I2S0")))
-		disable_i2s0_vcxo();
-	if (unlikely(!strcmp(clk->name, "I2S1")))
-		disable_i2s1_vcxo();
-#endif
-	spin_unlock_irqrestore(&clk->lock, iflags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-int clk_enable(struct clk *clk)
-{
-	int ret = 0;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&clk->lock, iflags);
-	if (clk->usecount++ == 0) {
-		if (likely((u32)clk->parent))
-			ret = clk_enable(clk->parent);
-
-		if (unlikely(ret != 0))
-			clk->usecount--;
-		else {
-			/* remove reset line (we never enable reset again) */
-			syscon_block_reset_disable(clk);
-			/* clocks without enable function are always on */
-			if (clk->enable)
-				clk->enable(clk);
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-			if (unlikely(!strcmp(clk->name, "I2S0")))
-				enable_i2s0_vcxo();
-			if (unlikely(!strcmp(clk->name, "I2S1")))
-				enable_i2s1_vcxo();
-#endif
-		}
-	}
-	spin_unlock_irqrestore(&clk->lock, iflags);
-	return ret;
-
-}
-EXPORT_SYMBOL(clk_enable);
-
-/* Returns the clock rate in Hz */
-static unsigned long clk_get_rate_cpuclk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 52000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-		return 104000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 208000000;
-	default:
-		break;
-	}
-	return clk->rate;
-}
-
-static unsigned long clk_get_rate_ahb_clk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 6500000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 26000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 52000000;
-	default:
-		break;
-	}
-	return clk->rate;
-
-}
-
-static unsigned long clk_get_rate_emif_clk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 52000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 104000000;
-	default:
-		break;
-	}
-	return clk->rate;
-
-}
-
-static unsigned long clk_get_rate_xgamclk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 6500000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 26000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 52000000;
-	default:
-		break;
-	}
-
-	return clk->rate;
-}
-
-static unsigned long clk_get_rate_mclk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-		/*
-		 * Here, the 208 MHz PLL gets shut down and the always
-		 * on 13 MHz PLL used for RTC etc kicks into use
-		 * instead.
-		 */
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-	{
-		/*
-		 * This clock is under program control. The register is
-		 * divided in two nybbles, bit 7-4 gives cycles-1 to count
-		 * high, bit 3-0 gives cycles-1 to count low. Distribute
-		 * these with no more than 1 cycle difference between
-		 * low and high and add low and high to get the actual
-		 * divisor. The base PLL is 208 MHz. Writing 0x00 will
-		 * divide by 1 and 1 so the highest frequency possible
-		 * is 104 MHz.
-		 *
-		 * e.g. 0x54 =>
-		 * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
-		 */
-		u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
-			U300_SYSCON_MMF0R_MASK;
-		switch (val) {
-		case 0x0054:
-			return 18900000;
-		case 0x0044:
-			return 20800000;
-		case 0x0043:
-			return 23100000;
-		case 0x0033:
-			return 26000000;
-		case 0x0032:
-			return 29700000;
-		case 0x0022:
-			return 34700000;
-		case 0x0021:
-			return 41600000;
-		case 0x0011:
-			return 52000000;
-		case 0x0000:
-			return 104000000;
-		default:
-			break;
-		}
-	}
-	default:
-		break;
-	}
-
-	return clk->rate;
-}
-
-static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 26000000;
-	default:
-		break;
-	}
-
-	return clk->rate;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-	else
-		return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
-{
-	if (rate <= 18900000)
-		return 18900000;
-	if (rate <= 20800000)
-		return 20800000;
-	if (rate <= 23100000)
-		return 23100000;
-	if (rate <= 26000000)
-		return 26000000;
-	if (rate <= 29700000)
-		return 29700000;
-	if (rate <= 34700000)
-		return 34700000;
-	if (rate <= 41600000)
-		return 41600000;
-	if (rate <= 52000000)
-		return 52000000;
-	return -EINVAL;
-}
-
-static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
-{
-	if (rate <= 13000000)
-		return 13000000;
-	if (rate <= 52000000)
-		return 52000000;
-	if (rate <= 104000000)
-		return 104000000;
-	if (rate <= 208000000)
-		return 208000000;
-	return -EINVAL;
-}
-
-/*
- * This adjusts a requested rate to the closest exact rate
- * a certain clock can provide. For a fixed clock it's
- * mostly clk->rate.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	/* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */
-	/* Else default to fixed value */
-
-	if (clk->round_rate) {
-		return (long) clk->round_rate(clk, rate);
-	} else {
-		printk(KERN_ERR "clock: Failed to round rate of %s\n",
-		       clk->name);
-	}
-	return (long) clk->rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-static int clk_set_rate_mclk(struct clk *clk, unsigned long rate)
-{
-	syscon_clk_rate_set_mclk(clk_round_rate(clk, rate));
-	return 0;
-}
-
-static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate)
-{
-	syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate));
-	return 0;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	/* TODO: set for EMIFCLK and AHBCLK */
-	/* Else assume the clock is fixed and fail */
-	if (clk->set_rate) {
-		return clk->set_rate(clk, rate);
-	} else {
-		printk(KERN_ERR "clock: Failed to set %s to %ld hz\n",
-		       clk->name, rate);
-		return -EINVAL;
-	}
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * Clock definitions. The clock parents are set to respective
- * bridge and the clock framework makes sure that the clocks have
- * parents activated and are brought out of reset when in use.
- *
- * Clocks that have hw_ctrld = true are hw controlled, and the hw
- * can by itself turn these clocks on and off.
- * So in other words, we don't really have to care about them.
- */
-
-static struct clk amba_clk = {
-	.name	    = "AMBA",
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = false,
-	.lock       = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
-};
-
-/*
- * These blocks are connected directly to the AMBA bus
- * with no bridge.
- */
-
-static struct clk cpu_clk = {
-	.name	    = "CPU",
-	.parent	    = &amba_clk,
-	.rate	    = 208000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_CPU_RESET_EN,
-	.set_rate   = clk_set_rate_cpuclk,
-	.get_rate   = clk_get_rate_cpuclk,
-	.round_rate = clk_round_rate_cpuclk,
-	.lock       = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
-};
-
-static struct clk nandif_clk = {
-	.name       = "FSMC",
-	.parent	    = &amba_clk,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_NANDIF_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
-};
-
-static struct clk semi_clk = {
-	.name       = "SEMI",
-	.parent	    = &amba_clk,
-	.rate       = 0, /* FIXME */
-	/* It is not possible to reset SEMI */
-	.hw_ctrld   = false,
-	.reset	    = false,
-	.clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk isp_clk = {
-	.name	    = "ISP",
-	.parent	    = &amba_clk,
-	.rate	    = 0, /* FIXME */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_ISP_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
-};
-
-static struct clk cds_clk = {
-	.name	    = "CDS",
-	.parent	    = &amba_clk,
-	.rate	    = 0, /* FIXME */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_CDS_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
-};
-#endif
-
-static struct clk dma_clk = {
-	.name       = "DMA",
-	.parent	    = &amba_clk,
-	.rate       = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_DMAC_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
-};
-
-static struct clk aaif_clk = {
-	.name       = "AAIF",
-	.parent	    = &amba_clk,
-	.rate       = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_AAIF_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
-};
-
-static struct clk apex_clk = {
-	.name       = "APEX",
-	.parent	    = &amba_clk,
-	.rate       = 0, /* FIXME */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_APEX_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
-};
-
-static struct clk video_enc_clk = {
-	.name       = "VIDEO_ENC",
-	.parent	    = &amba_clk,
-	.rate       = 208000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = false,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	/* This has XGAM in the name but refers to the video encoder */
-	.res_mask   = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
-};
-
-static struct clk xgam_clk = {
-	.name       = "XGAMCLK",
-	.parent	    = &amba_clk,
-	.rate       = 52000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_XGAM_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_XGAM_CLK_EN,
-	.get_rate   = clk_get_rate_xgamclk,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
-};
-
-/* This clock is used to activate the video encoder */
-static struct clk ahb_clk = {
-	.name	    = "AHB",
-	.parent	    = &amba_clk,
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = false, /* This one is set to false due to HW bug */
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_AHB_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_AHB_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_ahb_clk,
-	.lock       = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
-};
-
-
-/*
- * Clocks on the AHB bridge
- */
-
-static struct clk ahb_subsys_clk = {
-	.name	    = "AHB_SUBSYS",
-	.parent	    = &amba_clk,
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = false,
-	.clk_val    = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_ahb_clk,
-	.lock       = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
-};
-
-static struct clk intcon_clk = {
-	.name	    = "INTCON",
-	.parent	    = &ahb_subsys_clk,
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
-	/* INTCON can be reset but not clock-gated */
-	.lock       = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
-
-};
-
-static struct clk mspro_clk = {
-	.name       = "MSPRO",
-	.parent	    = &ahb_subsys_clk,
-	.rate       = 0, /* FIXME */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_MSPRO_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
-};
-
-static struct clk emif_clk = {
-	.name	    = "EMIF",
-	.parent	    = &ahb_subsys_clk,
-	.rate	    = 104000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_EMIF_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_EMIF_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_emif_clk,
-	.lock       = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
-};
-
-
-/*
- * Clocks on the FAST bridge
- */
-static struct clk fast_clk = {
-	.name	    = "FAST_BRIDGE",
-	.parent	    = &amba_clk,
-	.rate	    = 13000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
-};
-
-/*
- * The MMCI apb_pclk is hardwired to the same terminal as the
- * external MCI clock. Thus this will be referenced twice.
- */
-static struct clk mmcsd_clk = {
-	.name       = "MCLK",
-	.parent	    = &fast_clk,
-	.rate       = 18900000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_MMC_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_MMC_CLK_EN,
-	.get_rate   = clk_get_rate_mclk,
-	.set_rate   = clk_set_rate_mclk,
-	.round_rate = clk_round_rate_mclk,
-	.disable    = syscon_clk_disable,
-	.enable     = syscon_clk_enable,
-	.lock       = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
-};
-
-static struct clk i2s0_clk = {
-	.name       = "i2s0",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
-};
-
-static struct clk i2s1_clk = {
-	.name       = "i2s1",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
-};
-
-static struct clk i2c0_clk = {
-	.name       = "I2C0",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_I2C0_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2C0_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
-};
-
-static struct clk i2c1_clk = {
-	.name       = "I2C1",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_I2C1_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2C1_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
-};
-
-/*
- * The SPI apb_pclk is hardwired to the same terminal as the
- * external SPI clock. Thus this will be referenced twice.
- */
-static struct clk spi_clk = {
-	.name       = "SPI",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_SPI_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_SPI_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk uart1_pclk = {
-	.name	    = "UART1_PCLK",
-	.parent	    = &fast_clk,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_UART1_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart1_pclk.lock),
-};
-
-/* This one is hardwired to PLL13 */
-static struct clk uart1_clk = {
-	.name	    = "UART1_CLK",
-	.rate	    = 13000000,
-	.hw_ctrld   = true,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
-};
-#endif
-
-
-/*
- * Clocks on the SLOW bridge
- */
-static struct clk slow_clk = {
-	.name	    = "SLOW_BRIDGE",
-	.parent	    = &amba_clk,
-	.rate	    = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
-};
-
-/* TODO: implement SYSCON clock? */
-
-static struct clk wdog_clk = {
-	.name	    = "WDOG",
-	.parent	    = &slow_clk,
-	.hw_ctrld   = false,
-	.rate	    = 32768,
-	.reset	    = false,
-	/* This is always on, cannot be enabled/disabled or reset */
-	.lock       = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
-};
-
-static struct clk uart0_pclk = {
-	.name	    = "UART0_PCLK",
-	.parent	    = &slow_clk,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_UART_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart0_pclk.lock),
-};
-
-/* This one is hardwired to PLL13 */
-static struct clk uart0_clk = {
-	.name	    = "UART0_CLK",
-	.parent	    = &slow_clk,
-	.rate	    = 13000000,
-	.hw_ctrld   = true,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart0_clk.lock),
-};
-
-static struct clk keypad_clk = {
-	.name       = "KEYPAD",
-	.parent	    = &slow_clk,
-	.rate       = 32768,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_KEYPAD_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
-};
-
-static struct clk gpio_clk = {
-	.name       = "GPIO",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_GPIO_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
-};
-
-static struct clk rtc_clk = {
-	.name	    = "RTC",
-	.parent	    = &slow_clk,
-	.rate	    = 32768,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
-	/* This clock is always on, cannot be enabled/disabled */
-	.lock       = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
-};
-
-static struct clk bustr_clk = {
-	.name       = "BUSTR",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_BTR_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
-};
-
-static struct clk evhist_clk = {
-	.name       = "EVHIST",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_EH_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
-};
-
-static struct clk timer_clk = {
-	.name       = "TIMER",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_ACC_TMR_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
-};
-
-/*
- * There is a binary divider in the hardware that divides
- * the 13MHz PLL by 13 down to 1 MHz.
- */
-static struct clk app_timer_clk = {
-	.name       = "TIMER_APP",
-	.parent	    = &slow_clk,
-	.rate       = 1000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_APP_TMR_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk ppm_clk = {
-	.name	    = "PPM",
-	.parent	    = &slow_clk,
-	.rate	    = 0, /* FIXME */
-	.hw_ctrld   = true, /* TODO: Look up if it is hw ctrld or not */
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_PPM_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
-};
-#endif
-
-#define DEF_LOOKUP(devid, clkref)		\
-	{					\
-	.dev_id = devid,			\
-	.clk = clkref,				\
-	}
-
-#define DEF_LOOKUP_CON(devid, conid, clkref)	\
-	{					\
-	.dev_id = devid,			\
-	.con_id = conid,			\
-	.clk = clkref,				\
-	}
-
-/*
- * Here we only define clocks that are meaningful to
- * look up through clockdevice.
- */
-static struct clk_lookup lookups[] = {
-	/* Connected directly to the AMBA bus */
-	DEF_LOOKUP("amba",      &amba_clk),
-	DEF_LOOKUP("cpu",       &cpu_clk),
-	DEF_LOOKUP("fsmc-nand", &nandif_clk),
-	DEF_LOOKUP("semi",      &semi_clk),
-#ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("isp",       &isp_clk),
-	DEF_LOOKUP("cds",       &cds_clk),
-#endif
-	DEF_LOOKUP("dma",       &dma_clk),
-	DEF_LOOKUP("msl",       &aaif_clk),
-	DEF_LOOKUP("apex",      &apex_clk),
-	DEF_LOOKUP("video_enc", &video_enc_clk),
-	DEF_LOOKUP("xgam",      &xgam_clk),
-	DEF_LOOKUP("ahb",       &ahb_clk),
-	/* AHB bridge clocks */
-	DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
-	DEF_LOOKUP("intcon",    &intcon_clk),
-	DEF_LOOKUP_CON("intcon", "apb_pclk", &intcon_clk),
-	DEF_LOOKUP("mspro",     &mspro_clk),
-	DEF_LOOKUP("pl172",     &emif_clk),
-	DEF_LOOKUP_CON("pl172", "apb_pclk", &emif_clk),
-	/* FAST bridge clocks */
-	DEF_LOOKUP("fast",      &fast_clk),
-	DEF_LOOKUP("mmci",      &mmcsd_clk),
-	DEF_LOOKUP_CON("mmci", "apb_pclk", &mmcsd_clk),
-	/*
-	 * The .0 and .1 identifiers on these comes from the platform device
-	 * .id field and are assigned when the platform devices are registered.
-	 */
-	DEF_LOOKUP("i2s.0",     &i2s0_clk),
-	DEF_LOOKUP("i2s.1",     &i2s1_clk),
-	DEF_LOOKUP("stu300.0",  &i2c0_clk),
-	DEF_LOOKUP("stu300.1",  &i2c1_clk),
-	DEF_LOOKUP("pl022",     &spi_clk),
-	DEF_LOOKUP_CON("pl022", "apb_pclk", &spi_clk),
-#ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("uart1",     &uart1_clk),
-	DEF_LOOKUP_CON("uart1", "apb_pclk", &uart1_pclk),
-#endif
-	/* SLOW bridge clocks */
-	DEF_LOOKUP("slow",      &slow_clk),
-	DEF_LOOKUP("coh901327_wdog",      &wdog_clk),
-	DEF_LOOKUP("uart0",     &uart0_clk),
-	DEF_LOOKUP_CON("uart0", "apb_pclk", &uart0_pclk),
-	DEF_LOOKUP("apptimer",  &app_timer_clk),
-	DEF_LOOKUP("coh901461-keypad",    &keypad_clk),
-	DEF_LOOKUP("u300-gpio", &gpio_clk),
-	DEF_LOOKUP("rtc-coh901331",      &rtc_clk),
-	DEF_LOOKUP("bustr",     &bustr_clk),
-	DEF_LOOKUP("evhist",    &evhist_clk),
-	DEF_LOOKUP("timer",     &timer_clk),
-#ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("ppm",       &ppm_clk),
-#endif
-};
-
-static void __init clk_register(void)
-{
-	/* Register the lookups */
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
-
-#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
-/*
- * The following makes it possible to view the status (especially
- * reference count and reset status) for the clocks in the platform
- * by looking into the special file <debugfs>/u300_clocks
- */
-
-/* A list of all clocks in the platform */
-static struct clk *clks[] = {
-	/* Top node clock for the AMBA bus */
-	&amba_clk,
-	/* Connected directly to the AMBA bus */
-	&cpu_clk,
-	&nandif_clk,
-	&semi_clk,
-#ifdef CONFIG_MACH_U300_BS335
-	&isp_clk,
-	&cds_clk,
-#endif
-	&dma_clk,
-	&aaif_clk,
-	&apex_clk,
-	&video_enc_clk,
-	&xgam_clk,
-	&ahb_clk,
-
-	/* AHB bridge clocks */
-	&ahb_subsys_clk,
-	&intcon_clk,
-	&mspro_clk,
-	&emif_clk,
-	/* FAST bridge clocks */
-	&fast_clk,
-	&mmcsd_clk,
-	&i2s0_clk,
-	&i2s1_clk,
-	&i2c0_clk,
-	&i2c1_clk,
-	&spi_clk,
-#ifdef CONFIG_MACH_U300_BS335
-	&uart1_clk,
-	&uart1_pclk,
-#endif
-	/* SLOW bridge clocks */
-	&slow_clk,
-	&wdog_clk,
-	&uart0_clk,
-	&uart0_pclk,
-	&app_timer_clk,
-	&keypad_clk,
-	&gpio_clk,
-	&rtc_clk,
-	&bustr_clk,
-	&evhist_clk,
-	&timer_clk,
-#ifdef CONFIG_MACH_U300_BS335
-	&ppm_clk,
-#endif
-};
-
-static int u300_clocks_show(struct seq_file *s, void *data)
-{
-	struct clk *clk;
-	int i;
-
-	seq_printf(s, "CLOCK           DEVICE          RESET STATE\t" \
-		   "ACTIVE\tUSERS\tHW CTRL FREQ\n");
-	seq_printf(s, "---------------------------------------------" \
-		   "-----------------------------------------\n");
-	for (i = 0; i < ARRAY_SIZE(clks); i++) {
-		clk = clks[i];
-		if (clk != ERR_PTR(-ENOENT)) {
-			/* Format clock and device name nicely */
-			char cdp[33];
-			int chars;
-
-			chars = snprintf(&cdp[0], 17, "%s", clk->name);
-			while (chars < 16) {
-				cdp[chars] = ' ';
-				chars++;
-			}
-			chars = snprintf(&cdp[16], 17, "%s", clk->dev ?
-					 dev_name(clk->dev) : "N/A");
-			while (chars < 16) {
-				cdp[chars+16] = ' ';
-				chars++;
-			}
-			cdp[32] = '\0';
-			if (clk->get_rate || clk->rate != 0)
-				seq_printf(s,
-					   "%s%s\t%s\t%d\t%s\t%lu Hz\n",
-					   &cdp[0],
-					   clk->reset ?
-					   "ASSERTED" : "RELEASED",
-					   clk->usecount ? "ON" : "OFF",
-					   clk->usecount,
-					   clk->hw_ctrld  ? "YES" : "NO ",
-					   clk_get_rate(clk));
-			else
-				seq_printf(s,
-					   "%s%s\t%s\t%d\t%s\t" \
-					   "(unknown rate)\n",
-					   &cdp[0],
-					   clk->reset ?
-					   "ASSERTED" : "RELEASED",
-					   clk->usecount ? "ON" : "OFF",
-					   clk->usecount,
-					   clk->hw_ctrld  ? "YES" : "NO ");
-		}
-	}
-	return 0;
-}
-
-static int u300_clocks_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, u300_clocks_show, NULL);
-}
-
-static const struct file_operations u300_clocks_operations = {
-	.open		= u300_clocks_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init init_clk_read_debugfs(void)
-{
-	/* Expose a simple debugfs interface to view all clocks */
-	(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
-				   NULL, NULL,
-				   &u300_clocks_operations);
-	return 0;
-}
-/*
- * This needs to come in after the core_initcall() for the
- * overall clocks, because debugfs is not available until
- * the subsystems come up.
- */
-module_init(init_clk_read_debugfs);
-#endif
-
-int __init u300_clock_init(void)
-{
-	u16 val;
-
-	/*
-	 * FIXME: shall all this powermanagement stuff really live here???
-	 */
-
-	/* Set system to run at PLL208, max performance, a known state. */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Wait for the PLL208 to lock if not locked in yet */
-	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
-		 U300_SYSCON_CSR_PLL208_LOCK_IND));
-
-	/* Power management enable */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
-	val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
-
-	clk_register();
-
-	/*
-	 * Some of these may be on when we boot the system so make sure they
-	 * are turned OFF.
-	 */
-	syscon_block_reset_enable(&timer_clk);
-	timer_clk.disable(&timer_clk);
-
-	/*
-	 * These shall be turned on by default when we boot the system
-	 * so make sure they are ON. (Adding CPU here is a bit too much.)
-	 * These clocks will be claimed by drivers later.
-	 */
-	syscon_block_reset_disable(&semi_clk);
-	syscon_block_reset_disable(&emif_clk);
-	clk_enable(&semi_clk);
-	clk_enable(&emif_clk);
-
-	return 0;
-}
diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h
deleted file mode 100644
index 4f50ca8f901..00000000000
--- a/arch/arm/mach-u300/clock.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-u300/include/mach/clock.h
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * Adopted to ST-Ericsson U300 platforms by
- * Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __MACH_CLOCK_H
-#define __MACH_CLOCK_H
-
-#include <linux/clk.h>
-
-struct clk {
-	struct list_head node;
-	struct module *owner;
-	struct device *dev;
-	const char *name;
-	struct clk *parent;
-
-	spinlock_t lock;
-	unsigned long rate;
-	bool reset;
-	__u16 clk_val;
-	__s8 usecount;
-	void __iomem * res_reg;
-	__u16 res_mask;
-
-	bool hw_ctrld;
-
-	void (*recalc) (struct clk *);
-	int (*set_rate) (struct clk *, unsigned long);
-	unsigned long (*get_rate) (struct clk *);
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	void (*init) (struct clk *);
-	void (*enable) (struct clk *);
-	void (*disable) (struct clk *);
-};
-
-int u300_clock_init(void);
-
-#endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 33339745d43..03acf1883ec 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -30,6 +30,7 @@
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/dma-mapping.h>
+#include <linux/platform_data/clk-u300.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -44,7 +45,6 @@
 #include <mach/dma_channels.h>
 #include <mach/gpio-u300.h>
 
-#include "clock.h"
 #include "spi.h"
 #include "i2c.h"
 #include "u300-gpio.h"
@@ -1658,12 +1658,20 @@ void __init u300_init_irq(void)
 	int i;
 
 	/* initialize clocking early, we want to clock the INTCON */
-	u300_clock_init();
+	u300_clk_init(U300_SYSCON_VBASE);
+
+	/* Bootstrap EMIF and SEMI clocks */
+	clk = clk_get_sys("pl172", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_prepare_enable(clk);
+	clk = clk_get_sys("semi", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_prepare_enable(clk);
 
 	/* Clock the interrupt controller */
 	clk = clk_get_sys("intcon", NULL);
 	BUG_ON(IS_ERR(clk));
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 
 	for (i = 0; i < U300_VIC_IRQS_END; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
@@ -1811,13 +1819,6 @@ void __init u300_init_devices(void)
 	/* Check what platform we run and print some status information */
 	u300_init_check_chip();
 
-	/* Set system to run at PLL208, max performance, a known state. */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Wait for the PLL208 to lock if not locked in yet */
-	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
-		 U300_SYSCON_CSR_PLL208_LOCK_IND));
 	/* Initialize SPI device with some board specifics */
 	u300_spi_init(&pl022_device);
 
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index bc1c7897e82..56ac06d38ec 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -354,7 +354,7 @@ static void __init u300_timer_init(void)
 	/* Clock the interrupt controller */
 	clk = clk_get_sys("apptimer", NULL);
 	BUG_ON(IS_ERR(clk));
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 	rate = clk_get_rate(clk);
 
 	setup_sched_clock(u300_read_sched_clock, 32, rate);