Merge branch 'kirkwood/addr_decode' of git://git.infradead.org/users/jcooper/linux into late/kirkwood

* 'kirkwood/addr_decode' of git://git.infradead.org/users/jcooper/linux:
  arm: mvebu: add address decoding controller to the DT
  arm: mvebu: add basic address decoding support to Armada 370/XP
  arm: plat-orion: make bridge_virt_base non-const to support DT use case
  arm: plat-orion: introduce PLAT_ORION_LEGACY hidden config option
  arm: plat-orion: use void __iomem pointers for addr-map functions
  arm: plat-orion: use void __iomem pointers for time functions
  arm: plat-orion: use void __iomem pointers for MPP functions
  arm: plat-orion: use void __iomem pointers for UART registration functions
  arm: mach-mvebu: use IOMEM() for base address definitions
  arm: mach-orion5x: use IOMEM() for base address definitions
  arm: mach-mv78xx0: use IOMEM() for base address definitions
  arm: mach-kirkwood: use IOMEM() for base address definitions
  arm: mach-dove: use IOMEM() for base address definitions
  arm: mach-orion5x: use plus instead of or for address definitions
  arm: mach-mv78xx0: use plus instead of or for address definitions
  arm: mach-kirkwood: use plus instead of or for address definitions
  arm: mach-dove: use plus instead of or for address definitions

This branch had quite a few conflicts, in particular with the PCI static
map rework from Rob Herring, and a few other context conflicts due to
changes in Kconfig, etc.

I fixed up conflicts in:
	arch/arm/Kconfig
	arch/arm/mach-dove/common.c
	arch/arm/mach-dove/include/mach/dove.h
	arch/arm/mach-kirkwood/common.c
	arch/arm/mach-kirkwood/include/mach/kirkwood.h
	arch/arm/mach-mv78xx0/common.c
	arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
	arch/arm/mach-orion5x/common.c
	arch/arm/mach-orion5x/include/mach/orion5x.h

Signed-off-by: Olof Johansson <olof@lixom.net>

40 files changed, 459 insertions, 316 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5876aef72df..70505d8f85c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -540,7 +540,7 @@ config ARCH_DOVE
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
-	select PLAT_ORION
+	select PLAT_ORION_LEGACY
 	select USB_ARCH_HAS_EHCI
 	help
 	  Support for the Marvell Dove SoC 88AP510
@@ -551,7 +551,7 @@ config ARCH_KIRKWOOD
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select PLAT_ORION
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
@@ -577,7 +577,7 @@ config ARCH_MV78XX0
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select PLAT_ORION
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
@@ -589,7 +589,7 @@ config ARCH_ORION5X
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select PLAT_ORION
+	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
@@ -1146,6 +1146,10 @@ config PLAT_ORION
 	select IRQ_DOMAIN
 	select COMMON_CLK
 
+config PLAT_ORION_LEGACY
+	bool
+	select PLAT_ORION
+
 config PLAT_PXA
 	bool
 
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 6b6b932a5a7..16cc82cdaa8 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -63,6 +63,11 @@
 			       reg = <0xd0020300 0x30>;
 			       interrupts = <37>, <38>, <39>, <40>;
 		};
+
+		addr-decoding@d0020000 {
+			compatible = "marvell,armada-addr-decoding-controller";
+			reg = <0xd0020000 0x258>;
+		};
 	};
 };
 
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 28475bb7d36..b37bef1d5ff 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -41,12 +41,12 @@
  ****************************************************************************/
 static struct map_desc dove_io_desc[] __initdata = {
 	{
-		.virtual	= DOVE_SB_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) DOVE_SB_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
 		.length		= DOVE_SB_REGS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= DOVE_NB_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) DOVE_NB_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
 		.length		= DOVE_NB_REGS_SIZE,
 		.type		= MT_DEVICE,
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index f953bb54aa9..99f259e8cf3 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -13,22 +13,22 @@
 
 #include <mach/dove.h>
 
-#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0000)
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE + 0x0000)
 
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define  CPU_CTRL_PCIE0_LINK	0x00000001
 #define  CPU_RESET		0x00000002
 #define  CPU_CTRL_PCIE1_LINK	0x00000008
 
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
 #define  SOFT_RESET_OUT_EN	0x00000004
 
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define  SOFT_RESET		0x00000001
 
 #define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
 #define IRQ_CAUSE_LOW_OFF	0x0000
 #define IRQ_MASK_LOW_OFF	0x0004
 #define FIQ_MASK_LOW_OFF	0x0008
@@ -47,9 +47,9 @@
 #define ENDPOINT_MASK_HIGH	(IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
 #define PCIE_INTERRUPT_MASK	(IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
 
-#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE | 0x011c)
+#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE + 0x011c)
 
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE         (BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE         (BRIDGE_PHYS_BASE + 0x0300)
 
 #endif
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index c91e3004a47..661725e3115 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -25,7 +25,7 @@
  */
 
 #define DOVE_CESA_PHYS_BASE		0xc8000000
-#define DOVE_CESA_VIRT_BASE		0xfdb00000
+#define DOVE_CESA_VIRT_BASE		IOMEM(0xfdb00000)
 #define DOVE_CESA_SIZE			SZ_1M
 
 #define DOVE_PCIE0_MEM_PHYS_BASE	0xe0000000
@@ -38,15 +38,15 @@
 #define DOVE_BOOTROM_SIZE		SZ_128M
 
 #define DOVE_SCRATCHPAD_PHYS_BASE	0xf0000000
-#define DOVE_SCRATCHPAD_VIRT_BASE	0xfdd00000
+#define DOVE_SCRATCHPAD_VIRT_BASE	IOMEM(0xfdd00000)
 #define DOVE_SCRATCHPAD_SIZE		SZ_1M
 
 #define DOVE_SB_REGS_PHYS_BASE		0xf1000000
-#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
+#define DOVE_SB_REGS_VIRT_BASE		IOMEM(0xfde00000)
 #define DOVE_SB_REGS_SIZE		SZ_8M
 
 #define DOVE_NB_REGS_PHYS_BASE		0xf1800000
-#define DOVE_NB_REGS_VIRT_BASE		0xfe600000
+#define DOVE_NB_REGS_VIRT_BASE		IOMEM(0xfe600000)
 #define DOVE_NB_REGS_SIZE		SZ_8M
 
 #define DOVE_PCIE0_IO_PHYS_BASE		0xf2000000
@@ -62,75 +62,75 @@
  */
 
 /* SPI, I2C, UART */
-#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x11000)
-#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12000)
-#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12000)
-#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12100)
-#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12100)
-#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12200)
-#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12200)
-#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12300)
-#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12300)
-#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x10600)
-#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x14600)
+#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x11000)
+#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12000)
+#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12000)
+#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12100)
+#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12100)
+#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12200)
+#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12200)
+#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x12300)
+#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x12300)
+#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x10600)
+#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x14600)
 
 /* North-South Bridge */
-#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x20000)
+#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x20000)
 
 /* Cryptographic Engine */
-#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x30000)
+#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x30000)
 
 /* PCIe 0 */
-#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x40000)
+#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x40000)
 
 /* USB */
-#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x50000)
-#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x51000)
+#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x50000)
+#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x51000)
 
 /* XOR 0 Engine */
-#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60800)
-#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60800)
-#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60A00)
-#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60800)
+#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60A00)
 
 /* XOR 1 Engine */
-#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60900)
-#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60900)
-#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60B00)
-#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60900)
+#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x60B00)
 
 /* Gigabit Ethernet */
-#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x70000)
+#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x70000)
 
 /* PCIe 1 */
-#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x80000)
+#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0x80000)
 
 /* CAFE */
-#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x92000)
-#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x90000)
-#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x94000)
-#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x98000)
+#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x92000)
+#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x90000)
+#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0x98000)
 
 /* SATA */
-#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xa0000)
 
 /* I2S/SPDIF */
-#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb0000)
-#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xb0000)
+#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xb4000)
 
 /* NAND Flash Controller */
-#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xc0000)
 
 /* MPP, GPIO, Reset Sampling */
-#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0200)
 #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
-#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE | 0x014)
-#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE | 0x018)
-#define DOVE_GPIO_LO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
-#define DOVE_GPIO_HI_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0420)
-#define DOVE_GPIO2_VIRT_BASE    (DOVE_SB_REGS_VIRT_BASE | 0xe8400)
-#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE + 0x014)
+#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE + 0x018)
+#define DOVE_GPIO_LO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0400)
+#define DOVE_GPIO_HI_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0420)
+#define DOVE_GPIO2_VIRT_BASE    (DOVE_SB_REGS_VIRT_BASE + 0xe8400)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe803c)
 #define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
 #define  DOVE_NAND_GPIO_EN		(1 << 0)
 #define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_LO_VIRT_BASE + 0x40)
@@ -142,44 +142,44 @@
 #define  DOVE_SD0_GPIO_SEL		(1 << 0)
 
 /* Power Management */
-#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xd0000)
 #define DOVE_PMU_SIG_CTRL	(DOVE_PMU_VIRT_BASE + 0x802c)
 
 /* Real Time Clock */
-#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xd8500)
 
 /* AC97 */
-#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe0000)
-#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xe0000)
+#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe0000)
 
 /* Peripheral DMA */
-#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe4000)
-#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xe4000)
+#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe4000)
 
-#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE + 0xe802C)
 #define  DOVE_TWSI_ENABLE_OPTION1	(1 << 7)
-#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE + 0xe8030)
 #define  DOVE_TWSI_ENABLE_OPTION2	(1 << 20)
 #define  DOVE_TWSI_ENABLE_OPTION3	(1 << 21)
 #define  DOVE_TWSI_OPTION3_GPIO		(1 << 22)
-#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xec000)
-#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE + 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE + 0xe8034)
 #define  DOVE_SSP_ON_AU1		(1 << 0)
 #define  DOVE_SSP_CLOCK_ENABLE		(1 << 1)
 #define  DOVE_SSP_BPB_CLOCK_SRC_SSP	(1 << 11)
 /* Memory Controller */
-#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE | 0x00000)
+#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE + 0x00000)
 
 /* LCD Controller */
-#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x20000)
-#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x30000)
+#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x10000)
+#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x20000)
+#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x30000)
 
 /* Graphic Engine */
-#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x40000)
+#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x40000)
 
 /* Video Engine */
-#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x400000)
+#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE + 0x400000)
 
 #endif
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 186357f3b4d..087711524e8 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -100,19 +100,19 @@ void __init dove_init_irq(void)
 {
 	int i;
 
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START, gpio0_irqs);
 
-	orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
 
-	orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
 
 	/*
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index 355332d502c..bb15b26041c 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -182,18 +182,18 @@ static struct hw_pci dove_pci __initdata = {
 	.map_irq	= dove_pcie_map_irq,
 };
 
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
 {
 	printk(KERN_INFO "Dove PCIe port %d: ", index);
 
-	if (orion_pcie_link_up((void __iomem *)base)) {
+	if (orion_pcie_link_up(base)) {
 		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
 
 		printk(KERN_INFO "link up\n");
 
 		pp->index = index;
 		pp->root_bus_nr = -1;
-		pp->base = (void __iomem *)base;
+		pp->base = base;
 		spin_lock_init(&pp->conf_lock);
 		memset(&pp->res, 0, sizeof(pp->res));
 	} else {
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index e9a7180863d..8f0d162a1e1 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -86,5 +86,6 @@ void __init kirkwood_setup_cpu_mbus(void)
 	/*
 	 * Setup MBUS dram target info.
 	 */
-	orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE);
+	orion_setup_cpu_mbus_target(&addr_map_cfg,
+				    (void __iomem *) DDR_WINDOW_CPU_BASE);
 }
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 5c38c94b79a..3991077f58a 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -42,7 +42,7 @@
  ****************************************************************************/
 static struct map_desc kirkwood_io_desc[] __initdata = {
 	{
-		.virtual	= KIRKWOOD_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
 		.length		= KIRKWOOD_REGS_SIZE,
 		.type		= MT_DEVICE,
@@ -205,8 +205,7 @@ static struct clk *tclk;
 
 static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
 {
-	return clk_register_gate(NULL, name, "tclk", 0,
-				 (void __iomem *)CLOCK_GATING_CTRL,
+	return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
 				 bit_idx, 0, &gating_lock);
 }
 
@@ -215,8 +214,7 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name,
 						    void (*fn_en)(void),
 						    void (*fn_dis)(void))
 {
-	return clk_register_gate_fn(NULL, name, "tclk", 0,
-				    (void __iomem *)CLOCK_GATING_CTRL,
+	return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
 				    bit_idx, 0, &gating_lock, fn_en, fn_dis);
 }
 
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index a115142f869..5c82b7dce4e 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -13,37 +13,37 @@
 
 #include <mach/kirkwood.h>
 
-#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE + 0x0100)
 #define CPU_CONFIG_ERROR_PROP	0x00000004
 
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define CPU_RESET		0x00000002
 
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
 #define WDT_RESET_OUT_EN	0x00000002
 #define SOFT_RESET_OUT_EN	0x00000004
 
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define SOFT_RESET		0x00000001
 
-#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE + 0x0110)
 #define WDT_INT_REQ		0x0008
 
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
 #define IRQ_CAUSE_LOW_OFF	0x0000
 #define IRQ_MASK_LOW_OFF	0x0004
 #define IRQ_CAUSE_HIGH_OFF	0x0010
 #define IRQ_MASK_HIGH_OFF	0x0014
 
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE + 0x0300)
 
-#define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
+#define L2_CONFIG_REG		(BRIDGE_VIRT_BASE + 0x0128)
 #define L2_WRITETHROUGH		0x00000010
 
-#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE | 0x11c)
+#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE + 0x11c)
 #define CGC_BIT_GE0		(0)
 #define CGC_BIT_PEX0		(2)
 #define CGC_BIT_USB0		(3)
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index af4f0000dce..041653a04a9 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -45,7 +45,7 @@
 #define KIRKWOOD_PCIE_IO_SIZE		SZ_64K
 
 #define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE		0xfed00000
+#define KIRKWOOD_REGS_VIRT_BASE		IOMEM(0xfed00000)
 #define KIRKWOOD_REGS_SIZE		SZ_1M
 
 #define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
@@ -59,61 +59,61 @@
 /*
  * Register Map
  */
-#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
-#define DDR_OPERATION_BASE	(DDR_VIRT_BASE | 0x1418)
-
-#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
-#define  GPIO_LOW_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x0100)
-#define  GPIO_HIGH_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x0140)
-#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
-#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
-#define  I2C_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-
-#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x20000)
-
-#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x30000)
-
-#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
-#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE | 0x70)
-#define PCIE_STATUS		(PCIE_VIRT_BASE | 0x1a04)
-#define PCIE1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x44000)
-#define PCIE1_LINK_CTRL		(PCIE1_VIRT_BASE | 0x70)
-#define PCIE1_STATUS		(PCIE1_VIRT_BASE | 0x1a04)
-
-#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
-
-#define XOR0_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60800)
-#define XOR0_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60800)
-#define XOR1_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60900)
-#define XOR1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60900)
-#define XOR0_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
-#define XOR0_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
-#define XOR1_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
-#define XOR1_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
-
-#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
-
-#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
-#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x80000)
-#define SATA0_IF_CTRL		(SATA_VIRT_BASE | 0x2050)
-#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE | 0x2330)
-#define SATA1_IF_CTRL		(SATA_VIRT_BASE | 0x4050)
-#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE | 0x4330)
-
-#define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
-
-#define AUDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0xA0000)
-#define AUDIO_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0xA0000)
+#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE + 0x1500)
+#define DDR_OPERATION_BASE	(DDR_VIRT_BASE + 0x1418)
+
+#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x10000)
+#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE + 0x0030)
+#define  DEVICE_ID		(DEV_BUS_VIRT_BASE + 0x0034)
+#define  GPIO_LOW_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x0100)
+#define  GPIO_HIGH_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x0140)
+#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x0300)
+#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x0600)
+#define  I2C_PHYS_BASE		(DEV_BUS_PHYS_BASE + 0x1000)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2100)
+
+#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x20000)
+#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+
+#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x30000)
+
+#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x40000)
+#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE + 0x70)
+#define PCIE_STATUS		(PCIE_VIRT_BASE + 0x1a04)
+#define PCIE1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x44000)
+#define PCIE1_LINK_CTRL		(PCIE1_VIRT_BASE + 0x70)
+#define PCIE1_STATUS		(PCIE1_VIRT_BASE + 0x1a04)
+
+#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x50000)
+
+#define XOR0_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x60800)
+#define XOR0_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x60800)
+#define XOR1_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x60900)
+#define XOR1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x60900)
+#define XOR0_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
+#define XOR0_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
+#define XOR1_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
+#define XOR1_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
+
+#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x74000)
+
+#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x80000)
+#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x80000)
+#define SATA0_IF_CTRL		(SATA_VIRT_BASE + 0x2050)
+#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE + 0x2330)
+#define SATA1_IF_CTRL		(SATA_VIRT_BASE + 0x4050)
+#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE + 0x4330)
+
+#define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x90000)
+
+#define AUDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
+#define AUDIO_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
 
 /*
  * Supported devices and revisions.
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 20149a7fd28..884703535a0 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -10,6 +10,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
@@ -30,14 +31,14 @@ static int __initdata gpio1_irqs[4] = {
 
 void __init kirkwood_init_irq(void)
 {
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-49.
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0,
 			IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
-	orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0,
 			IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
 }
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 532d8acb38f..ec544918b12 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -47,8 +47,8 @@ void kirkwood_enable_pcie(void)
 void kirkwood_pcie_id(u32 *dev, u32 *rev)
 {
 	kirkwood_enable_pcie();
-	*dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
-	*rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
+	*dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
+	*rev = orion_pcie_rev(PCIE_VIRT_BASE);
 }
 
 struct pcie_port {
@@ -133,7 +133,7 @@ static struct pci_ops pcie_ops = {
 
 static void __init pcie0_ioresources_init(struct pcie_port *pp)
 {
-	pp->base = (void __iomem *)PCIE_VIRT_BASE;
+	pp->base = PCIE_VIRT_BASE;
 	pp->irq	= IRQ_KIRKWOOD_PCIE;
 
 	/*
@@ -147,7 +147,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp)
 
 static void __init pcie1_ioresources_init(struct pcie_port *pp)
 {
-	pp->base = (void __iomem *)PCIE1_VIRT_BASE;
+	pp->base = PCIE1_VIRT_BASE;
 	pp->irq	= IRQ_KIRKWOOD_PCIE1;
 
 	/*
@@ -255,11 +255,11 @@ static struct hw_pci kirkwood_pci __initdata = {
 	.map_irq	= kirkwood_pcie_map_irq,
 };
 
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
 {
 	printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
 
-	if (orion_pcie_link_up((void __iomem *)base)) {
+	if (orion_pcie_link_up(base)) {
 		printk(KERN_INFO "link up\n");
 		pcie_port_map[num_pcie_ports++] = index;
 	} else
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 5bbca268044..367a9400f53 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -20,6 +20,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
@@ -161,7 +162,7 @@ static int __init ts41x_pci_init(void)
 		 * (Marvell 88sx7042/sata_mv) is known to stop working
 		 * after a few minutes.
 		 */
-		orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+		orion_pcie_reset(PCIE_VIRT_BASE);
 
 		kirkwood_pcie_id(&dev, &rev);
 		if (dev == MV88F6282_DEV_ID)
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index 137e479d15a..343c435b417 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -48,7 +48,7 @@ static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, i
 	 * so we don't need to take that into account here.
 	 */
 
-	return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
+	return (win < 8) ? WIN0_OFF(win) : WIN8_OFF(win);
 }
 
 /*
@@ -72,10 +72,10 @@ void __init mv78xx0_setup_cpu_mbus(void)
 	 */
 	if (mv78xx0_core_index() == 0)
 		orion_setup_cpu_mbus_target(&addr_map_cfg,
-					    DDR_WINDOW_CPU0_BASE);
+					    (void __iomem *) DDR_WINDOW_CPU0_BASE);
 	else
 		orion_setup_cpu_mbus_target(&addr_map_cfg,
-					    DDR_WINDOW_CPU1_BASE);
+					    (void __iomem *) DDR_WINDOW_CPU1_BASE);
 }
 
 void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index a6f3cd21e8c..131cd4883f3 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -130,12 +130,12 @@ static int get_tclk(void)
  ****************************************************************************/
 static struct map_desc mv78xx0_io_desc[] __initdata = {
 	{
-		.virtual	= MV78XX0_CORE_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) MV78XX0_CORE_REGS_VIRT_BASE,
 		.pfn		= 0,
 		.length		= MV78XX0_CORE_REGS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= MV78XX0_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) MV78XX0_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
 		.length		= MV78XX0_REGS_SIZE,
 		.type		= MT_DEVICE,
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
index eb187e0e059..5f03484584d 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -11,18 +11,18 @@
 
 #include <mach/mv78xx0.h>
 
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define L2_WRITETHROUGH		0x00020000
 
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
 #define SOFT_RESET_OUT_EN	0x00000004
 
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define SOFT_RESET		0x00000001
 
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
 #define IRQ_CAUSE_ERR_OFF	0x0000
 #define IRQ_CAUSE_LOW_OFF	0x0004
 #define IRQ_CAUSE_HIGH_OFF	0x0008
@@ -30,7 +30,7 @@
 #define IRQ_MASK_LOW_OFF	0x0010
 #define IRQ_MASK_HIGH_OFF	0x0014
 
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE + 0x0300)
 
 #endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index bd03fed1128..46200a183cf 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -41,7 +41,7 @@
  */
 #define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
 #define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
-#define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
+#define MV78XX0_CORE_REGS_VIRT_BASE	IOMEM(0xfe400000)
 #define MV78XX0_CORE_REGS_PHYS_BASE	0xfe400000
 #define MV78XX0_CORE_REGS_SIZE		SZ_16K
 
@@ -49,7 +49,7 @@
 #define MV78XX0_PCIE_IO_SIZE		SZ_1M
 
 #define MV78XX0_REGS_PHYS_BASE		0xf1000000
-#define MV78XX0_REGS_VIRT_BASE		0xfd000000
+#define MV78XX0_REGS_VIRT_BASE		IOMEM(0xfd000000)
 #define MV78XX0_REGS_SIZE		SZ_1M
 
 #define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
@@ -64,47 +64,47 @@
 /*
  * Register Map
  */
-#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE | 0x1500)
-#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE | 0x1570)
-
-#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
-#define  GPIO_VIRT_BASE		(DEV_BUS_VIRT_BASE | 0x0100)
-#define  I2C_0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1000)
-#define  I2C_1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1100)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2200)
-#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2200)
-#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2300)
-#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2300)
-
-#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x30000)
-#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x34000)
-
-#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x40000)
-#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x44000)
-#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x48000)
-#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x4c000)
-
-#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x50000)
-#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x51000)
-#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x52000)
-
-#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x74000)
-
-#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x80000)
-#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x84000)
-#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x88000)
-#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x8c000)
-
-#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
+#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE + 0x00000)
+#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE + 0x1500)
+#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE + 0x1570)
+
+#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x10000)
+#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE + 0x0030)
+#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE + 0x0034)
+#define  GPIO_VIRT_BASE		(DEV_BUS_VIRT_BASE + 0x0100)
+#define  I2C_0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x1000)
+#define  I2C_1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x1100)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2100)
+#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2200)
+#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2200)
+#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2300)
+#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2300)
+
+#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x30000)
+#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x34000)
+
+#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x40000)
+#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x44000)
+#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x48000)
+#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x4c000)
+
+#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x50000)
+#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x51000)
+#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x52000)
+
+#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x74000)
+
+#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x80000)
+#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x84000)
+#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x88000)
+#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x8c000)
+
+#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0xa0000)
 
 /*
  * Supported devices and revisions.
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 4d720f2aedb..32073444024 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -10,6 +10,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
@@ -24,16 +25,16 @@ static int __initdata gpio0_irqs[4] = {
 
 void __init mv78xx0_init_irq(void)
 {
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
-	orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+	orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.  (The GPIO interrupt mask
 	 * registers for core #1 are at an offset of 0x18 from those of
 	 * core #0.)
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE,
+	orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE,
 			mv78xx0_core_index() ? 0x18 : 0,
 			IRQ_MV78XX0_GPIO_START, gpio0_irqs);
 }
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 26a059b4f47..a9a154a646d 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -34,8 +34,8 @@ static struct resource pcie_io_space;
 
 void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
 {
-	*dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE);
-	*rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE);
+	*dev = orion_pcie_dev_id(PCIE00_VIRT_BASE);
+	*rev = orion_pcie_rev(PCIE00_VIRT_BASE);
 }
 
 u32 pcie_port_size[8] = {
@@ -223,11 +223,11 @@ static struct hw_pci mv78xx0_pci __initdata = {
 	.map_irq	= mv78xx0_pcie_map_irq,
 };
 
-static void __init add_pcie_port(int maj, int min, unsigned long base)
+static void __init add_pcie_port(int maj, int min, void __iomem *base)
 {
 	printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
 
-	if (orion_pcie_link_up((void __iomem *)base)) {
+	if (orion_pcie_link_up(base)) {
 		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
 
 		printk("link up\n");
@@ -235,7 +235,7 @@ static void __init add_pcie_port(int maj, int min, unsigned long base)
 		pp->maj = maj;
 		pp->min = min;
 		pp->root_bus_nr = -1;
-		pp->base = (void __iomem *)base;
+		pp->base = base;
 		spin_lock_init(&pp->conf_lock);
 		memset(&pp->res, 0, sizeof(pp->res));
 	} else {
@@ -249,7 +249,7 @@ void __init mv78xx0_pcie_init(int init_port0, int init_port1)
 
 	if (init_port0) {
 		add_pcie_port(0, 0, PCIE00_VIRT_BASE);
-		if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
+		if (!orion_pcie_x4_mode(PCIE00_VIRT_BASE)) {
 			add_pcie_port(0, 1, PCIE01_VIRT_BASE);
 			add_pcie_port(0, 2, PCIE02_VIRT_BASE);
 			add_pcie_port(0, 3, PCIE03_VIRT_BASE);
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 6ea8998ab8f..cbe56644306 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,4 +1,4 @@
 ccflags-$(ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
 
 obj-y += system-controller.o
-obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o
+obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o
diff --git a/arch/arm/mach-mvebu/addr-map.c b/arch/arm/mach-mvebu/addr-map.c
new file mode 100644
index 00000000000..fe454a4430b
--- /dev/null
+++ b/arch/arm/mach-mvebu/addr-map.c
@@ -0,0 +1,134 @@
+/*
+ * Address map functions for Marvell 370 / XP SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <plat/addr-map.h>
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define ARMADA_XP_TARGET_DEV_BUS	1
+#define   ARMADA_XP_ATTR_DEV_BOOTROM    0x1D
+#define ARMADA_XP_TARGET_ETH1		3
+#define ARMADA_XP_TARGET_PCIE_0_2	4
+#define ARMADA_XP_TARGET_ETH0		7
+#define ARMADA_XP_TARGET_PCIE_1_3	8
+
+#define ARMADA_370_TARGET_DEV_BUS       1
+#define   ARMADA_370_ATTR_DEV_BOOTROM   0x1D
+#define ARMADA_370_TARGET_PCIE_0        4
+#define ARMADA_370_TARGET_PCIE_1        8
+
+#define ARMADA_WINDOW_8_PLUS_OFFSET       0x90
+#define ARMADA_SDRAM_ADDR_DECODING_OFFSET 0x180
+
+static const struct __initdata orion_addr_map_info
+armada_xp_addr_map_info[] = {
+	/*
+	 * Window for the BootROM, needed for SMP on Armada XP
+	 */
+	{ 0, 0xfff00000, SZ_1M, ARMADA_XP_TARGET_DEV_BUS,
+	  ARMADA_XP_ATTR_DEV_BOOTROM, -1 },
+	/* End marker */
+	{ -1, 0, 0, 0, 0, 0 },
+};
+
+static const struct __initdata orion_addr_map_info
+armada_370_addr_map_info[] = {
+	/* End marker */
+	{ -1, 0, 0, 0, 0, 0 },
+};
+
+static struct of_device_id of_addr_decoding_controller_table[] = {
+	{ .compatible = "marvell,armada-addr-decoding-controller" },
+	{ /* end of list */ },
+};
+
+static void __iomem *
+armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
+{
+	unsigned int offset;
+
+	/* The register layout is a bit annoying and the below code
+	 * tries to cope with it.
+	 * - At offset 0x0, there are the registers for the first 8
+	 *   windows, with 4 registers of 32 bits per window (ctrl,
+	 *   base, remap low, remap high)
+	 * - Then at offset 0x80, there is a hole of 0x10 bytes for
+	 *   the internal registers base address and internal units
+	 *   sync barrier register.
+	 * - Then at offset 0x90, there the registers for 12
+	 *   windows, with only 2 registers of 32 bits per window
+	 *   (ctrl, base).
+	 */
+	if (win < 8)
+		offset = (win << 4);
+	else
+		offset = ARMADA_WINDOW_8_PLUS_OFFSET + (win << 3);
+
+	return cfg->bridge_virt_base + offset;
+}
+
+static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+	.num_wins = 20,
+	.remappable_wins = 8,
+	.win_cfg_base = armada_cfg_base,
+};
+
+static int __init armada_setup_cpu_mbus(void)
+{
+	struct device_node *np;
+	void __iomem *mbus_unit_addr_decoding_base;
+	void __iomem *sdram_addr_decoding_base;
+
+	np = of_find_matching_node(NULL, of_addr_decoding_controller_table);
+	if (!np)
+		return -ENODEV;
+
+	mbus_unit_addr_decoding_base = of_iomap(np, 0);
+	BUG_ON(!mbus_unit_addr_decoding_base);
+
+	sdram_addr_decoding_base =
+		mbus_unit_addr_decoding_base +
+		ARMADA_SDRAM_ADDR_DECODING_OFFSET;
+
+	addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base;
+
+	/*
+	 * Disable, clear and configure windows.
+	 */
+	if (of_machine_is_compatible("marvell,armadaxp"))
+		orion_config_wins(&addr_map_cfg, armada_xp_addr_map_info);
+	else if (of_machine_is_compatible("marvell,armada370"))
+		orion_config_wins(&addr_map_cfg, armada_370_addr_map_info);
+	else {
+		pr_err("Unsupported SoC\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	orion_setup_cpu_mbus_target(&addr_map_cfg,
+				    sdram_addr_decoding_base);
+	return 0;
+}
+
+/* Using a early_initcall is needed so that this initialization gets
+ * done before the SMP initialization, which requires the BootROM to
+ * be remapped. */
+early_initcall(armada_setup_cpu_mbus);
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index b46418a8b35..49d791548ad 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -25,7 +25,7 @@
 
 static struct map_desc armada_370_xp_io_desc[] __initdata = {
 	{
-		.virtual	= ARMADA_370_XP_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) ARMADA_370_XP_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ARMADA_370_XP_REGS_PHYS_BASE),
 		.length		= ARMADA_370_XP_REGS_SIZE,
 		.type		= MT_DEVICE,
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index 25f0ca8d782..aac9bebc6b0 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -16,7 +16,7 @@
 #define __MACH_ARMADA_370_XP_H
 
 #define ARMADA_370_XP_REGS_PHYS_BASE	0xd0000000
-#define ARMADA_370_XP_REGS_VIRT_BASE	0xfeb00000
+#define ARMADA_370_XP_REGS_VIRT_BASE	IOMEM(0xfeb00000)
 #define ARMADA_370_XP_REGS_SIZE		SZ_1M
 
 #endif /* __MACH_ARMADA_370_XP_H */
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index eaac83d1df6..b5efc0fd31c 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -113,7 +113,8 @@ void __init orion5x_setup_cpu_mbus_bridge(void)
 	/*
 	 * Setup MBUS dram target info.
 	 */
-	orion_setup_cpu_mbus_target(&addr_map_cfg, ORION5X_DDR_WINDOW_CPU_BASE);
+	orion_setup_cpu_mbus_target(&addr_map_cfg,
+				    (void __iomem *) ORION5X_DDR_WINDOW_CPU_BASE);
 }
 
 void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 5387fdfcaf3..3e07f52f212 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -42,12 +42,12 @@
  ****************************************************************************/
 static struct map_desc orion5x_io_desc[] __initdata = {
 	{
-		.virtual	= ORION5X_REGS_VIRT_BASE,
+		.virtual	= (unsigned long) ORION5X_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ORION5X_REGS_PHYS_BASE),
 		.length		= ORION5X_REGS_SIZE,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= ORION5X_PCIE_WA_VIRT_BASE,
+		.virtual	= (unsigned long) ORION5X_PCIE_WA_VIRT_BASE,
 		.pfn		= __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
 		.length		= ORION5X_PCIE_WA_SIZE,
 		.type		= MT_DEVICE,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 0e19db69f5c..e533588880f 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -701,7 +701,7 @@ static void __init dns323_init(void)
 		 * Note: AFAIK, rev B1 needs the same treatement but I'll let
 		 * somebody else test it.
 		 */
-		writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c);
+		writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c);
 		break;
 	}
 }
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index 11a3c1e9801..461fd69a10a 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -13,27 +13,27 @@
 
 #include <mach/orion5x.h>
 
-#define CPU_CONF		(ORION5X_BRIDGE_VIRT_BASE | 0x100)
+#define CPU_CONF		(ORION5X_BRIDGE_VIRT_BASE + 0x100)
 
-#define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE | 0x104)
+#define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE + 0x104)
 
-#define RSTOUTn_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define RSTOUTn_MASK		(ORION5X_BRIDGE_VIRT_BASE + 0x108)
 #define WDT_RESET_OUT_EN	0x0002
 
-#define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE | 0x10c)
+#define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE + 0x10c)
 
-#define BRIDGE_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x110)
+#define BRIDGE_CAUSE		(ORION5X_BRIDGE_VIRT_BASE + 0x110)
 
-#define POWER_MNG_CTRL_REG	(ORION5X_BRIDGE_VIRT_BASE | 0x11C)
+#define POWER_MNG_CTRL_REG	(ORION5X_BRIDGE_VIRT_BASE + 0x11C)
 
 #define WDT_INT_REQ		0x0008
 
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
-#define MAIN_IRQ_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x200)
+#define MAIN_IRQ_CAUSE		(ORION5X_BRIDGE_VIRT_BASE + 0x200)
 
-#define MAIN_IRQ_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x204)
+#define MAIN_IRQ_MASK		(ORION5X_BRIDGE_VIRT_BASE + 0x204)
 
-#define TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
-#define TIMER_PHYS_BASE		(ORION5X_BRIDGE_PHYS_BASE | 0x300)
+#define TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE + 0x300)
+#define TIMER_PHYS_BASE		(ORION5X_BRIDGE_PHYS_BASE + 0x300)
 #endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 1b60131b7f6..d265f5484a8 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -37,7 +37,7 @@
  * fd000000	f0000000	16M	PCIe WA space (Orion-1/Orion-NAS only)
  ****************************************************************************/
 #define ORION5X_REGS_PHYS_BASE		0xf1000000
-#define ORION5X_REGS_VIRT_BASE		0xfe000000
+#define ORION5X_REGS_VIRT_BASE		IOMEM(0xfe000000)
 #define ORION5X_REGS_SIZE		SZ_1M
 
 #define ORION5X_PCIE_IO_PHYS_BASE	0xf2000000
@@ -53,7 +53,7 @@
 
 /* Relevant only for Orion-1/Orion-NAS */
 #define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
-#define ORION5X_PCIE_WA_VIRT_BASE	0xfd000000
+#define ORION5X_PCIE_WA_VIRT_BASE	IOMEM(0xfd000000)
 #define ORION5X_PCIE_WA_SIZE		SZ_16M
 
 #define ORION5X_PCIE_MEM_PHYS_BASE	0xe0000000
@@ -66,42 +66,42 @@
  * Orion Registers Map
  ******************************************************************************/
 
-#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
-#define  ORION5X_DDR_WINDOW_CPU_BASE    (ORION5X_DDR_VIRT_BASE | 0x1500)
-#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
-#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
-#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x00000)
+#define  ORION5X_DDR_WINDOW_CPU_BASE    (ORION5X_DDR_VIRT_BASE + 0x1500)
+#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE + 0x10000)
+#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE + 0x10000)
+#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE + (x))
 #define  GPIO_VIRT_BASE			ORION5X_DEV_BUS_REG(0x0100)
-#define  SPI_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
-#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
+#define  SPI_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE + 0x0600)
+#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE + 0x1000)
+#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE + 0x2000)
+#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE + 0x2000)
+#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE + 0x2100)
+#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE + 0x2100)
 
-#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x20000)
+#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE + 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE	(ORION5X_REGS_PHYS_BASE + 0x20000)
 
-#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
+#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x30000)
 
-#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
+#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x40000)
 
-#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
-#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
+#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0x50000)
+#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x50000)
 
-#define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x60900)
-#define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x60900)
+#define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0x60900)
+#define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x60900)
 
-#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
-#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
+#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0x70000)
+#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x70000)
 
-#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
-#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
+#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0x80000)
+#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x80000)
 
-#define ORION5X_CRYPTO_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x90000)
+#define ORION5X_CRYPTO_PHYS_BASE	(ORION5X_REGS_PHYS_BASE + 0x90000)
 
-#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
-#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
+#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0xa0000)
+#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0xa0000)
 
 /*******************************************************************************
  * Device Bus Registers
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index e152641cdb0..30a192b9c51 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -12,6 +12,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
@@ -25,11 +26,11 @@ static int __initdata gpio0_irqs[4] = {
 
 void __init orion5x_init_irq(void)
 {
-	orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK);
+	orion_irq_init(0, MAIN_IRQ_MASK);
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.
 	 */
-	orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_VIRT_BASE, 0,
+	orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, 0,
 			IRQ_ORION5X_GPIO_START, gpio0_irqs);
 }
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 6921d49b988..cd50e328db2 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -38,7 +38,7 @@
 /*****************************************************************************
  * PCIe controller
  ****************************************************************************/
-#define PCIE_BASE	((void __iomem *)ORION5X_PCIE_VIRT_BASE)
+#define PCIE_BASE	(ORION5X_PCIE_VIRT_BASE)
 
 void __init orion5x_pcie_id(u32 *dev, u32 *rev)
 {
@@ -111,7 +111,7 @@ static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn,
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 
-	ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE,
+	ret = orion_pcie_rd_conf_wa(ORION5X_PCIE_WA_VIRT_BASE,
 				    bus, devfn, where, size, val);
 
 	return ret;
@@ -188,7 +188,7 @@ static int __init pcie_setup(struct pci_sys_data *sys)
 /*****************************************************************************
  * PCI controller
  ****************************************************************************/
-#define ORION5X_PCI_REG(x)	(ORION5X_PCI_VIRT_BASE | (x))
+#define ORION5X_PCI_REG(x)	(ORION5X_PCI_VIRT_BASE + (x))
 #define PCI_MODE		ORION5X_PCI_REG(0xd00)
 #define PCI_CMD			ORION5X_PCI_REG(0xc00)
 #define PCI_P2P_CONF		ORION5X_PCI_REG(0x1d14)
diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index c20ce0f5ce3..1251e5bd41c 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -2,9 +2,8 @@
 # Makefile for the linux kernel.
 #
 
-obj-y	:= irq.o pcie.o time.o common.o mpp.o addr-map.o
-obj-m	:=
-obj-n	:=
-obj-	:=
+obj-y                             += addr-map.o
 
-obj-$(CONFIG_GENERIC_GPIO) += gpio.o
+orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o
+obj-$(CONFIG_PLAT_ORION_LEGACY)   += irq.o pcie.o time.o common.o mpp.o
+obj-$(CONFIG_PLAT_ORION_LEGACY)   += $(orion-gpio-y)
diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c
index 367ca89ac40..a7b8060c293 100644
--- a/arch/arm/plat-orion/addr-map.c
+++ b/arch/arm/plat-orion/addr-map.c
@@ -48,7 +48,7 @@ EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
 static void __init __iomem *
 orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
 {
-	return (void __iomem *)(cfg->bridge_virt_base + (win << 4));
+	return cfg->bridge_virt_base + (win << 4);
 }
 
 /*
@@ -143,19 +143,16 @@ void __init orion_config_wins(struct orion_addr_map_cfg * cfg,
  * Setup MBUS dram target info.
  */
 void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
-					const u32 ddr_window_cpu_base)
+					const void __iomem *ddr_window_cpu_base)
 {
-	void __iomem *addr;
 	int i;
 	int cs;
 
 	orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
 
-	addr = (void __iomem *)ddr_window_cpu_base;
-
 	for (i = 0, cs = 0; i < 4; i++) {
-		u32 base = readl(addr + DDR_BASE_CS_OFF(i));
-		u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
+		u32 base = readl(ddr_window_cpu_base + DDR_BASE_CS_OFF(i));
+		u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
 
 		/*
 		 * Chip select enabled?
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 87f53caef65..b8a688cad4c 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -86,13 +86,13 @@ static void __init uart_complete(
 	struct platform_device *orion_uart,
 	struct plat_serial8250_port *data,
 	struct resource *resources,
-	unsigned int membase,
+	void __iomem *membase,
 	resource_size_t mapbase,
 	unsigned int irq,
 	struct clk *clk)
 {
 	data->mapbase = mapbase;
-	data->membase = (void __iomem *)membase;
+	data->membase = membase;
 	data->irq = irq;
 	data->uartclk = uart_get_clk_rate(clk);
 	orion_uart->dev.platform_data = data;
@@ -120,7 +120,7 @@ static struct platform_device orion_uart0 = {
 	.id			= PLAT8250_DEV_PLATFORM,
 };
 
-void __init orion_uart0_init(unsigned int membase,
+void __init orion_uart0_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk)
@@ -148,7 +148,7 @@ static struct platform_device orion_uart1 = {
 	.id			= PLAT8250_DEV_PLATFORM1,
 };
 
-void __init orion_uart1_init(unsigned int membase,
+void __init orion_uart1_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk)
@@ -176,7 +176,7 @@ static struct platform_device orion_uart2 = {
 	.id			= PLAT8250_DEV_PLATFORM2,
 };
 
-void __init orion_uart2_init(unsigned int membase,
+void __init orion_uart2_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk)
@@ -204,7 +204,7 @@ static struct platform_device orion_uart3 = {
 	.id			= 3,
 };
 
-void __init orion_uart3_init(unsigned int membase,
+void __init orion_uart3_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk)
diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h
index fd556f77562..ec63e4a627d 100644
--- a/arch/arm/plat-orion/include/plat/addr-map.h
+++ b/arch/arm/plat-orion/include/plat/addr-map.h
@@ -16,7 +16,7 @@ extern struct mbus_dram_target_info orion_mbus_dram_info;
 struct orion_addr_map_cfg {
 	const int num_wins;	/* Total number of windows */
 	const int remappable_wins;
-	const u32 bridge_virt_base;
+	void __iomem *bridge_virt_base;
 
 	/* If NULL, the default cpu_win_can_remap will be used, using
 	   the value in remappable_wins */
@@ -49,5 +49,5 @@ void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
 				const u8 attr, const int remap);
 
 void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
-					const u32 ddr_window_cpu_base);
+					const void __iomem *ddr_window_cpu_base);
 #endif
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index ae2377ef63e..6bbc3fe5f58 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -13,22 +13,22 @@
 
 struct dsa_platform_data;
 
-void __init orion_uart0_init(unsigned int membase,
+void __init orion_uart0_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk);
 
-void __init orion_uart1_init(unsigned int membase,
+void __init orion_uart1_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk);
 
-void __init orion_uart2_init(unsigned int membase,
+void __init orion_uart2_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk);
 
-void __init orion_uart3_init(unsigned int membase,
+void __init orion_uart3_init(void __iomem *membase,
 			     resource_size_t mapbase,
 			     unsigned int irq,
 			     struct clk *clk);
diff --git a/arch/arm/plat-orion/include/plat/mpp.h b/arch/arm/plat-orion/include/plat/mpp.h
index 723adce99f4..254552fee88 100644
--- a/arch/arm/plat-orion/include/plat/mpp.h
+++ b/arch/arm/plat-orion/include/plat/mpp.h
@@ -29,6 +29,6 @@
 #define MPP_OUTPUT_MASK		GENERIC_MPP(0, 0x0, 0, 1)
 
 void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
-			   unsigned int mpp_max, unsigned int dev_bus);
+			   unsigned int mpp_max, void __iomem *dev_bus);
 
 #endif
diff --git a/arch/arm/plat-orion/include/plat/time.h b/arch/arm/plat-orion/include/plat/time.h
index 4d5f1f6e18d..07527e417c6 100644
--- a/arch/arm/plat-orion/include/plat/time.h
+++ b/arch/arm/plat-orion/include/plat/time.h
@@ -11,9 +11,9 @@
 #ifndef __PLAT_TIME_H
 #define __PLAT_TIME_H
 
-void orion_time_set_base(u32 timer_base);
+void orion_time_set_base(void __iomem *timer_base);
 
-void orion_time_init(u32 bridge_base, u32 bridge_timer1_clr_mask,
+void orion_time_init(void __iomem *bridge_base, u32 bridge_timer1_clr_mask,
 		     unsigned int irq, unsigned int tclk);
 
 
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c
index 7740bb31d66..e686fe76a96 100644
--- a/arch/arm/plat-orion/mpp.c
+++ b/arch/arm/plat-orion/mpp.c
@@ -18,15 +18,15 @@
 #include <plat/mpp.h>
 
 /* Address of the ith MPP control register */
-static __init unsigned long mpp_ctrl_addr(unsigned int i,
-					  unsigned long dev_bus)
+static __init void __iomem *mpp_ctrl_addr(unsigned int i,
+					  void __iomem *dev_bus)
 {
 	return dev_bus + (i) * 4;
 }
 
 
 void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
-			   unsigned int mpp_max, unsigned int dev_bus)
+			   unsigned int mpp_max, void __iomem *dev_bus)
 {
 	unsigned int mpp_nr_regs = (1 + mpp_max/8);
 	u32 mpp_ctrl[mpp_nr_regs];
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 1ed8d1397fc..0f4fa863dd5 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -180,13 +180,13 @@ static struct irqaction orion_timer_irq = {
 };
 
 void __init
-orion_time_set_base(u32 _timer_base)
+orion_time_set_base(void __iomem *_timer_base)
 {
-	timer_base = (void __iomem *)_timer_base;
+	timer_base = _timer_base;
 }
 
 void __init
-orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
+orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
 		unsigned int irq, unsigned int tclk)
 {
 	u32 u;
@@ -194,7 +194,7 @@ orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
 	/*
 	 * Set SoC-specific data.
 	 */
-	bridge_base = (void __iomem *)_bridge_base;
+	bridge_base = _bridge_base;
 	bridge_timer1_clr_mask = _bridge_timer1_clr_mask;
 
 	ticks_per_jiffy = (tclk + HZ/2) / HZ;