Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)
  rtc: max8925: Add function to work as wakeup source
  mfd: Add pm ops to max8925
  mfd: Convert aat2870 to dev_pm_ops
  mfd: Still check other interrupts if we get a wm831x touchscreen IRQ
  mfd: Introduce missing kfree in 88pm860x probe routine
  mfd: Add S5M series configuration
  mfd: Add s5m series irq driver
  mfd: Add S5M core driver
  mfd: Improve mc13xxx dt binding document
  mfd: Fix stmpe section mismatch
  mfd: Fix stmpe build warning
  mfd: Fix STMPE I2c build failure
  mfd: Constify aat2870-core i2c_device_id table
  gpio: Add support for stmpe variant 801
  mfd: Add support for stmpe variant 801
  mfd: Add support for stmpe variant 610
  mfd: Add support for STMPE SPI interface
  mfd: Separate out STMPE controller and interface specific code
  misc: Remove max8997-muic sysfs attributes
  mfd: Remove unused wm831x_irq_data_to_mask_reg()
  ...

Fix up trivial conflict in drivers/leds/Kconfig due to addition of
LEDS_MAX8997 and LEDS_TCA6507 next to each other.

11 files changed, 90 insertions, 7 deletions

diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 6b93e200bca..5bc6b3837b2 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -202,6 +202,7 @@ static struct irda_platform_data assabet_irda_data = {
 static struct mcp_plat_data assabet_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
+	.codec		= "ucb1x00",
 };
 
 static void __init assabet_init(void)
@@ -252,6 +253,17 @@ static void __init assabet_init(void)
 	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
 			    ARRAY_SIZE(assabet_flash_resources));
 	sa11x0_register_irda(&assabet_irda_data);
+
+	/*
+	 * Setup the PPC unit correctly.
+	 */
+	PPDR &= ~PPC_RXD4;
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PSDR |= PPC_RXD4;
+	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
+	ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
 	sa11x0_register_mcp(&assabet_mcp_data);
 }
 
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 11bb6d0b9be..d12d0f48b1d 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -124,12 +124,23 @@ static void __init cerf_map_io(void)
 static struct mcp_plat_data cerf_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
+	.codec		= "ucb1x00",
 };
 
 static void __init cerf_init(void)
 {
 	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
 	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
+
+	/*
+	 * Setup the PPC unit correctly.
+	 */
+	PPDR &= ~PPC_RXD4;
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PSDR |= PPC_RXD4;
+	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
 	sa11x0_register_mcp(&cerf_mcp_data);
 }
 
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index b9060e236de..c483912d08a 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -27,6 +27,7 @@
 #include <linux/timer.h>
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
+#include <linux/mfd/ucb1x00.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -85,10 +86,15 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
 	.num_devs	= 1,
 };
 
+static struct ucb1x00_plat_data collie_ucb1x00_data = {
+	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
+};
+
 static struct mcp_plat_data collie_mcp_data = {
 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
 	.sclk_rate	= 9216000,
-	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
+	.codec		= "ucb1x00",
+	.codec_pdata	= &collie_ucb1x00_data,
 };
 
 /*
@@ -351,6 +357,16 @@ static void __init collie_init(void)
 
 	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
 			    ARRAY_SIZE(collie_flash_resources));
+
+	/*
+	 * Setup the PPC unit correctly.
+	 */
+	PPDR &= ~PPC_RXD4;
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PSDR |= PPC_RXD4;
+	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
 	sa11x0_register_mcp(&collie_mcp_data);
 
 	sharpsl_save_param();
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 480d2ea46b0..e3a28ca2a7b 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -217,10 +217,15 @@ static struct platform_device sa11x0uart3_device = {
 static struct resource sa11x0mcp_resources[] = {
 	[0] = {
 		.start	= __PREG(Ser4MCCR0),
-		.end	= __PREG(Ser4MCCR0) + 0xffff,
+		.end	= __PREG(Ser4MCCR0) + 0x1C - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= __PREG(Ser4MCCR1),
+		.end	= __PREG(Ser4MCCR1) + 0x4 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_Ser4MCP,
 		.end	= IRQ_Ser4MCP,
 		.flags	= IORESOURCE_IRQ,
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index ed1a331508a..586cec898b3 100644
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -17,6 +17,8 @@ struct mcp_plat_data {
 	u32 mccr1;
 	unsigned int sclk_rate;
 	int gpio_base;
+	const char *codec;
+	void *codec_pdata;
 };
 
 #endif
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index af4e2761f3d..d117ceab621 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -24,10 +24,20 @@
 static struct mcp_plat_data lart_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
+	.codec		= "ucb1x00",
 };
 
 static void __init lart_init(void)
 {
+	/*
+	 * Setup the PPC unit correctly.
+	 */
+	PPDR &= ~PPC_RXD4;
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PSDR |= PPC_RXD4;
+	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
 	sa11x0_register_mcp(&lart_mcp_data);
 }
 
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 318b2b766a0..748d34435b3 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -55,11 +55,22 @@ static struct resource shannon_flash_resource = {
 static struct mcp_plat_data shannon_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
+	.codec		= "ucb1x00",
 };
 
 static void __init shannon_init(void)
 {
 	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
+
+	/*
+	 * Setup the PPC unit correctly.
+	 */
+	PPDR &= ~PPC_RXD4;
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PSDR |= PPC_RXD4;
+	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
 	sa11x0_register_mcp(&shannon_mcp_data);
 }
 
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index e17c04d6e32..458ececefa5 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -14,6 +14,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/mfd/ucb1x00.h>
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
@@ -187,10 +188,15 @@ static struct resource simpad_flash_resources [] = {
 	}
 };
 
+static struct ucb1x00_plat_data simpad_ucb1x00_data = {
+	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
+};
+
 static struct mcp_plat_data simpad_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
+	.codec		= "ucb1300",
+	.codec_pdata	= &simpad_ucb1x00_data,
 };
 
 
@@ -378,6 +384,16 @@ static int __init simpad_init(void)
 
 	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
 			      ARRAY_SIZE(simpad_flash_resources));
+
+	/*
+	 * Setup the PPC unit correctly.
+	 */
+	PPDR &= ~PPC_RXD4;
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PSDR |= PPC_RXD4;
+	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
 	sa11x0_register_mcp(&simpad_mcp_data);
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 9361a529017..5c00712907d 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -19,11 +19,11 @@
 #include <linux/amba/pl022.h>
 #include <linux/amba/serial.h>
 #include <linux/spi/spi.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/ab8500.h>
 #include <linux/mfd/tc3589x.h>
 #include <linux/mfd/tps6105x.h>
-#include <linux/mfd/ab8500/gpio.h>
+#include <linux/mfd/abx500/ab8500-gpio.h>
 #include <linux/leds-lp5521.h>
 #include <linux/input.h>
 #include <linux/smsc911x.h>
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index fe1569b67c9..9de9e9c4dbb 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -10,7 +10,7 @@
 #include <linux/amba/bus.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
-#include <linux/mfd/ab5500/ab5500.h>
+#include <linux/mfd/abx500/ab5500.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index 47969909836..d2d4131435a 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -9,7 +9,7 @@
 #define __MACH_IRQS_BOARD_MOP500_H
 
 /* Number of AB8500 irqs is taken from header file */
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
 
 #define MOP500_AB8500_IRQ_BASE		IRQ_BOARD_START
 #define MOP500_AB8500_IRQ_END		(MOP500_AB8500_IRQ_BASE \