diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-05-02 08:56:55 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-05-02 08:56:55 -0700 |
| commit | 4d26aa305414dbb33b3c32fb205b68004cda8ffc (patch) | |
| tree | 78da855745406afc870ea3454e584907f7cccb73 /arch/arm | |
| parent | 600fe9751aeb6f6b72de84076a05c5b8c04152c0 (diff) | |
| parent | e74fc973b6e531fef1fce8b101ffff05ecfb774c (diff) | |
Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-critical fixes from Olof Johansson:
"Here is a collection of fixes (and some intermixed cleanups) that were
considered less important and thus not included in the later parts of
the 3.9-rc cycle.
It's a bit all over the map, contents wise. A series of ux500 fixes
and cleanups, a bunch of various fixes for OMAP and tegra, and some
for Freescale i.MX and even Qualcomm MSM.
Note that there's also a patch on this branch to globally turn off
-Wmaybe-uninitialized when building with -Os. It's been posted
several times by Arnd and no dissent was raised, but nobody seemed
interested to pick it up. So here it is, as the topmost patch."
* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
Turn off -Wmaybe-uninitialized when building with -Os
ARM: orion5x: include linux/cpu.h
ARM: tegra: call cpu_do_idle from C code
ARM: u300: fix ages old copy/paste bug
ARM: OMAP2+: add dependencies on ARCH_MULTI_V6/V7
ARM: tegra: solve adr range issue with THUMB2_KERNEL enabled
ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled
ARM: tegra: fix build error when THUMB2_KERNEL enabled
ARM: msm: Fix uncompess.h tx underrun check
ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms
ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro
ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"
ARM: mach-imx: mach-imx6q: Fix sparse warnings
ARM: mach-imx: src: Include "common.h
ARM: mach-imx: gpc: Include "common.h"
ARM: mach-imx: avic: Staticize *avic_base
ARM: mach-imx: tzic: Staticize *tzic_base
ARM: mach-imx: clk: Include "clk.h"
ARM: mach-imx: clk-busy: Staticize clk_busy_mux_ops
...
Diffstat (limited to 'arch/arm')
74 files changed, 279 insertions, 242 deletions
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index aaa63d0a809..b6bc4ff17f2 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -191,7 +191,7 @@ prcmu: prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; - reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; + reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; interrupts = <0 47 0x4>; #address-cells = <1>; @@ -674,10 +674,13 @@ compatible = "regulator-gpio"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2600000>; + regulator-max-microvolt = <2900000>; regulator-name = "mmci-reg"; regulator-type = "voltage"; + startup-delay-us = <100>; + enable-active-high; + states = <1800000 0x1 2900000 0x0>; diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi index 379128eb9d9..c0bc426952e 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/href.dtsi @@ -87,6 +87,7 @@ mmc-cap-sd-highspeed; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; + vqmmc-supply = <&vmmci>; cd-gpios = <&tc3589x_gpio 3 0x4>; diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts index eec29c4a86d..c2d27481592 100644 --- a/arch/arm/boot/dts/hrefprev60.dts +++ b/arch/arm/boot/dts/hrefprev60.dts @@ -25,6 +25,14 @@ }; soc-u9500 { + prcmu@80157000 { + ab8500@5 { + ab8500-gpio { + compatible = "stericsson,ab8500-gpio"; + }; + }; + }; + i2c@80004000 { tps61052@33 { compatible = "tps61052"; @@ -40,7 +48,7 @@ vmmci: regulator-gpio { gpios = <&tc3589x_gpio 18 0x4>; - gpio-enable = <&tc3589x_gpio 17 0x4>; + enable-gpio = <&tc3589x_gpio 17 0x4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index d3ec32f6b79..db5db24fd54 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -299,6 +299,10 @@ }; ab8500 { + ab8500-gpio { + compatible = "stericsson,ab8500-gpio"; + }; + ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi index 39446a247e7..615392a7567 100644 --- a/arch/arm/boot/dts/stuib.dtsi +++ b/arch/arm/boot/dts/stuib.dtsi @@ -15,7 +15,7 @@ stmpe1601: stmpe1601@40 { compatible = "st,stmpe1601"; reg = <0x40>; - interrupts = <26 0x1>; + interrupts = <26 0x2>; interrupt-parent = <&gpio6>; interrupt-controller; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 44416209004..cb73e62d61a 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -444,7 +444,7 @@ }; sdhci@c8000600 { - cd-gpios = <&gpio 23 0>; /* gpio PC7 */ + cd-gpios = <&gpio 23 1>; /* gpio PC7 */ }; sound { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 61d027f0361..1f79c0debb0 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -437,7 +437,7 @@ sdhci@c8000200 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ bus-width = <4>; @@ -445,7 +445,7 @@ sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <8>; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 54d6fce00a5..9db36da8e02 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -436,7 +436,7 @@ sdhci@c8000000 { status = "okay"; - cd-gpios = <&gpio 173 0>; /* gpio PV5 */ + cd-gpios = <&gpio 173 1>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 169 0>; /* gpio PV1 */ bus-width = <4>; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 37b3a57ec0f..715a8b8dd9c 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -584,7 +584,7 @@ sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <4>; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 4766abae7a7..6e9d91fc619 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -465,7 +465,7 @@ }; sdhci@c8000600 { - cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ bus-width = <4>; status = "okay"; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 5d79e4fc49a..98f3e44f2a5 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -325,7 +325,7 @@ sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 121 0>; /* gpio PP1 */ + cd-gpios = <&gpio 121 1>; /* gpio PP1 */ wp-gpios = <&gpio 122 0>; /* gpio PP2 */ bus-width = <4>; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 425c89000c2..4aef56f2d96 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -520,7 +520,7 @@ sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <4>; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index ea57c0f6dcc..5762188c60a 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -510,6 +510,7 @@ sdhci@c8000400 { status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 173 0>; /* gpio PV5 */ bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 8ff2ff20e4a..0a2cd24df85 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -257,7 +257,7 @@ sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ bus-width = <4>; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 17499272a4e..3e2d21018a5 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -311,7 +311,7 @@ sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ bus-width = <4>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 73187173117..9420053acc1 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -117,7 +117,7 @@ }; pmu { - compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + compatible = "arm,cortex-a15-pmu"; interrupts = <0 68 4>, <0 69 4>; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index dfe371ec274..d2803be4e1a 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -134,7 +134,7 @@ }; pmu { - compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + compatible = "arm,cortex-a15-pmu"; interrupts = <0 68 4>, <0 69 4>; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index 6328cbc71d3..c544a550459 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -111,7 +111,7 @@ }; pmu { - compatible = "arm,cortex-a5-pmu", "arm,cortex-a9-pmu"; + compatible = "arm,cortex-a5-pmu"; interrupts = <0 68 4>, <0 69 4>; }; diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 52e4bb5cf12..126f74f6087 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -32,16 +32,6 @@ static struct map_desc cns3xxx_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = CNS3XXX_GPIOA_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_GPIOA_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = CNS3XXX_GPIOB_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_GPIOB_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = CNS3XXX_MISC_BASE_VIRT, .pfn = __phys_to_pfn(CNS3XXX_MISC_BASE), .length = SZ_4K, diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h index b1021aafa48..9b145b1e48e 100644 --- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h +++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h @@ -20,22 +20,16 @@ #define CNS3XXX_SPI_FLASH_BASE 0x60000000 /* SPI Serial Flash Memory */ #define CNS3XXX_SWITCH_BASE 0x70000000 /* Switch and HNAT Control */ -#define CNS3XXX_SWITCH_BASE_VIRT 0xFFF00000 #define CNS3XXX_PPE_BASE 0x70001000 /* HANT */ -#define CNS3XXX_PPE_BASE_VIRT 0xFFF50000 #define CNS3XXX_EMBEDDED_SRAM_BASE 0x70002000 /* HANT Embedded SRAM */ -#define CNS3XXX_EMBEDDED_SRAM_BASE_VIRT 0xFFF60000 #define CNS3XXX_SSP_BASE 0x71000000 /* Synchronous Serial Port - SPI/PCM/I2C */ -#define CNS3XXX_SSP_BASE_VIRT 0xFFF01000 #define CNS3XXX_DMC_BASE 0x72000000 /* DMC Control (DDR2 SDRAM) */ -#define CNS3XXX_DMC_BASE_VIRT 0xFFF02000 #define CNS3XXX_SMC_BASE 0x73000000 /* SMC Control */ -#define CNS3XXX_SMC_BASE_VIRT 0xFFF03000 #define SMC_MEMC_STATUS_OFFSET 0x000 #define SMC_MEMIF_CFG_OFFSET 0x004 @@ -74,13 +68,10 @@ #define SMC_PCELL_ID_3_OFFSET 0xFFC #define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */ -#define CNS3XXX_GPIOA_BASE_VIRT 0xFFF04000 #define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */ -#define CNS3XXX_GPIOB_BASE_VIRT 0xFFF05000 #define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */ -#define CNS3XXX_RTC_BASE_VIRT 0xFFF06000 #define RTC_SEC_OFFSET 0x00 #define RTC_MIN_OFFSET 0x04 @@ -112,22 +103,16 @@ #define CNS3XXX_UART0_BASE_VIRT 0xFB002000 #define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */ -#define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000 #define CNS3XXX_UART2_BASE 0x78800000 /* UART 2 */ -#define CNS3XXX_UART2_BASE_VIRT 0xFFF0B000 #define CNS3XXX_DMAC_BASE 0x79000000 /* Generic DMA Control */ -#define CNS3XXX_DMAC_BASE_VIRT 0xFFF0D000 #define CNS3XXX_CORESIGHT_BASE 0x7A000000 /* CoreSight */ -#define CNS3XXX_CORESIGHT_BASE_VIRT 0xFFF0E000 #define CNS3XXX_CRYPTO_BASE 0x7B000000 /* Crypto */ -#define CNS3XXX_CRYPTO_BASE_VIRT 0xFFF0F000 #define CNS3XXX_I2S_BASE 0x7C000000 /* I2S */ -#define CNS3XXX_I2S_BASE_VIRT 0xFFF10000 #define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */ #define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFB003000 @@ -150,42 +135,31 @@ #define TIMER_FREERUN_CONTROL_OFFSET 0x44 #define CNS3XXX_HCIE_BASE 0x7D000000 /* HCIE Control */ -#define CNS3XXX_HCIE_BASE_VIRT 0xFFF30000 #define CNS3XXX_RAID_BASE 0x7E000000 /* RAID Control */ -#define CNS3XXX_RAID_BASE_VIRT 0xFFF12000 #define CNS3XXX_AXI_IXC_BASE 0x7F000000 /* AXI IXC */ -#define CNS3XXX_AXI_IXC_BASE_VIRT 0xFFF13000 #define CNS3XXX_CLCD_BASE 0x80000000 /* LCD Control */ -#define CNS3XXX_CLCD_BASE_VIRT 0xFFF14000 #define CNS3XXX_USBOTG_BASE 0x81000000 /* USB OTG Control */ -#define CNS3XXX_USBOTG_BASE_VIRT 0xFFF15000 #define CNS3XXX_USB_BASE 0x82000000 /* USB Host Control */ #define CNS3XXX_SATA2_BASE 0x83000000 /* SATA */ #define CNS3XXX_SATA2_SIZE SZ_16M -#define CNS3XXX_SATA2_BASE_VIRT 0xFFF17000 #define CNS3XXX_CAMERA_BASE 0x84000000 /* Camera Interface */ -#define CNS3XXX_CAMERA_BASE_VIRT 0xFFF18000 #define CNS3XXX_SDIO_BASE 0x85000000 /* SDIO */ -#define CNS3XXX_SDIO_BASE_VIRT 0xFFF19000 #define CNS3XXX_I2S_TDM_BASE 0x86000000 /* I2S TDM */ -#define CNS3XXX_I2S_TDM_BASE_VIRT 0xFFF1A000 #define CNS3XXX_2DG_BASE 0x87000000 /* 2D Graphic Control */ -#define CNS3XXX_2DG_BASE_VIRT 0xFFF1B000 #define CNS3XXX_USB_OHCI_BASE 0x88000000 /* USB OHCI */ #define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */ -#define CNS3XXX_L2C_BASE_VIRT 0xFFF27000 #define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */ #define CNS3XXX_PCIE0_MEM_BASE_VIRT 0xE0000000 @@ -239,7 +213,6 @@ #define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000) #define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */ -#define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000 /* * Misc block diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 0eff23ed92b..9c3e014705b 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -51,7 +51,7 @@ #define AVIC_NUM_IRQS 64 -void __iomem *avic_base; +static void __iomem *avic_base; static struct irq_domain *domain; static u32 avic_saved_mask_reg[2]; diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 85b728cc27a..4bb1bc419b7 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -147,7 +147,7 @@ static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index) return ret; } -struct clk_ops clk_busy_mux_ops = { +static struct clk_ops clk_busy_mux_ops = { .get_parent = clk_busy_mux_get_parent, .set_parent = clk_busy_mux_set_parent, }; diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index cc49c7ae186..a63e415609a 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/err.h> #include <linux/string.h> +#include "clk.h" /** * DOC: basic gatable clock which can gate and ungate it's ouput diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c index abff350ba24..c1eaee34695 100644 --- a/arch/arm/mach-imx/clk-pllv1.c +++ b/arch/arm/mach-imx/clk-pllv1.c @@ -78,7 +78,7 @@ static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw, return ll; } -struct clk_ops clk_pllv1_ops = { +static struct clk_ops clk_pllv1_ops = { .recalc_rate = clk_pllv1_recalc_rate, }; diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c index 0440379e362..20889d59b44 100644 --- a/arch/arm/mach-imx/clk-pllv2.c +++ b/arch/arm/mach-imx/clk-pllv2.c @@ -229,7 +229,7 @@ static void clk_pllv2_unprepare(struct clk_hw *hw) __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); } -struct clk_ops clk_pllv2_ops = { +static struct clk_ops clk_pllv2_ops = { .prepare = clk_pllv2_prepare, .unprepare = clk_pllv2_unprepare, .recalc_rate = clk_pllv2_recalc_rate, diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c index f5e8be8e7f1..37e884ed1cd 100644 --- a/arch/arm/mach-imx/clk.c +++ b/arch/arm/mach-imx/clk.c @@ -1,3 +1,4 @@ #include <linux/spinlock.h> +#include "clk.h" DEFINE_SPINLOCK(imx_ccm_lock); diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index d7ce72252a4..c1c99a72c6a 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -18,6 +18,7 @@ #include <linux/io.h> #include "hardware.h" +#include "common.h" static int mx5_cpu_rev = -1; diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 03fcbd08259..e70e3acbf9b 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -3,6 +3,7 @@ #include <linux/io.h> #include "hardware.h" +#include "common.h" unsigned int __mxc_cpu_type; EXPORT_SYMBOL(__mxc_cpu_type); diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index b4c70028d35..b2f08bfbbdd 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -46,7 +46,7 @@ static const int eukrea_mbimx27_pins[] __initconst = { PE10_PF_UART3_CTS, PE11_PF_UART3_RTS, /* UART4 */ -#if !defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) PB26_AF_UART4_RTS, PB28_AF_UART4_TXD, PB29_AF_UART4_CTS, @@ -306,7 +306,7 @@ void __init eukrea_mbimx27_baseboard_init(void) imx27_add_imx_uart1(&uart_pdata); imx27_add_imx_uart2(&uart_pdata); -#if !defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) imx27_add_imx_uart3(&uart_pdata); #endif diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index a96ccc7f501..02b61cdf39b 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -16,6 +16,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/irqchip/arm-gic.h> +#include "common.h" #define GPC_IMR1 0x008 #define GPC_PGC_CPU_PDN 0x2a0 diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index cabefbc5e7c..7c66805d2cc 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -40,7 +40,7 @@ static DEFINE_SPINLOCK(gpio_mux_lock); #define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3) -unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; +static unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; /* * set the mode for a IOMUX pin. */ diff --git a/arch/arm/mach-imx/irq-common.c b/arch/arm/mach-imx/irq-common.c index b6e11458e5a..4b34f52dc46 100644 --- a/arch/arm/mach-imx/irq-common.c +++ b/arch/arm/mach-imx/irq-common.c @@ -21,25 +21,6 @@ #include "irq-common.h" -int imx_irq_set_priority(unsigned char irq, unsigned char prio) -{ - struct irq_chip_generic *gc; - struct mxc_extra_irq *exirq; - int ret; - - ret = -ENOSYS; - - gc = irq_get_chip_data(irq); - if (gc && gc->private) { - exirq = gc->private; - if (exirq->set_priority) - ret = exirq->set_priority(irq, prio); - } - - return ret; -} -EXPORT_SYMBOL(imx_irq_set_priority); - int mxc_set_irq_fiq(unsigned int irq, unsigned int type) { struct irq_chip_generic *gc; diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 146559311bd..ea50870bda8 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -48,7 +48,7 @@ static const int eukrea_cpuimx27_pins[] __initconst = { PE14_PF_UART1_CTS, PE15_PF_UART1_RTS, /* UART4 */ -#if defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) PB26_AF_UART4_RTS, PB28_AF_UART4_TXD, PB29_AF_UART4_CTS, @@ -272,7 +272,7 @@ static void __init eukrea_cpuimx27_init(void) /* SDHC2 can be used for Wifi */ imx27_add_mxc_mmc(1, NULL); #endif -#if defined(MACH_EUKREA_CPUIMX27_USEUART4) +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4) /* in which case UART4 is also used for Bluetooth */ imx27_add_imx_uart3(&uart_pdata); #endif diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 9ffd103b27e..fe1b7aafabd 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -73,7 +73,7 @@ static int imx6q_revision(void) } } -void imx6q_restart(char mode, const char *cmd) +static void imx6q_restart(char mode, const char *cmd) { struct device_node *np; void __iomem *wdog_base; @@ -256,7 +256,7 @@ put_node: of_node_put(np); } -struct platform_device imx6q_cpufreq_pdev = { +static struct platform_device imx6q_cpufreq_pdev = { .name = "imx6q-cpufreq", }; diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index cefa047c405..e0e69a68217 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -82,7 +82,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size, return __arm_ioremap_caller(phys_addr, size, mtype, caller); } -void __init imx3_init_l2x0(void) +static void __init imx3_init_l2x0(void) { #ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base; diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 09a742f8c7a..324731c2a44 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -16,6 +16,7 @@ #include <linux/of_address.h> #include <linux/smp.h> #include <asm/smp_plat.h> +#include "common.h" #define SRC_SCR 0x000 #define SRC_GPR1 0x020 diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index 9721161f208..8183178d5aa 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -49,7 +49,7 @@ #define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */ #define TZIC_ID0 0x0FD0 /* Indentification Register 0 */ -void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */ +static void __iomem *tzic_base; static struct irq_domain *domain; #define TZIC_NUM_IRQS 128 diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h index fa97a10d869..94324870fb0 100644 --- a/arch/arm/mach-msm/include/mach/uncompress.h +++ b/arch/arm/mach-msm/include/mach/uncompress.h @@ -37,7 +37,7 @@ static void putc(int c) * Wait for TX_READY to be set; but skip it if we have a * TX underrun. */ - if (UART_DM_SR & 0x08) + if (!(UART_DM_SR & 0x08)) while (!(UART_DM_ISR & 0x80)) cpu_relax(); diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 903da8eb886..cdd05f2e67e 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -55,12 +55,6 @@ config MACH_OMAP_H3 TI OMAP 1710 H3 board support. Say Y here if you have such a board. -config MACH_OMAP_HTCWIZARD - bool "HTC Wizard" - depends on ARCH_OMAP850 - help - HTC Wizard smartphone support (AKA QTEK 9100, ...) - config MACH_HERALD bool "HTC Herald" depends on ARCH_OMAP850 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 8111cd9ff3e..4dc34ae6a85 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -55,6 +55,7 @@ config SOC_HAS_REALTIME_COUNTER config ARCH_OMAP2 bool "TI OMAP2" depends on ARCH_OMAP2PLUS + depends on ARCH_MULTI_V6 default y select CPU_V6 select MULTI_IRQ_HANDLER @@ -64,6 +65,7 @@ config ARCH_OMAP2 config ARCH_OMAP3 bool "TI OMAP3" depends on ARCH_OMAP2PLUS + depends on ARCH_MULTI_V7 default y select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM @@ -80,6 +82,7 @@ config ARCH_OMAP4 bool "TI OMAP4" default y depends on ARCH_OMAP2PLUS + depends on ARCH_MULTI_V7 select ARCH_HAS_OPP select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP select ARM_CPU_SUSPEND if PM @@ -99,6 +102,7 @@ config ARCH_OMAP4 config SOC_OMAP5 bool "TI OMAP5" + depends on ARCH_MULTI_V7 select ARM_CPU_SUSPEND if PM select ARM_GIC select CPU_V7 @@ -135,6 +139,7 @@ config SOC_TI81XX config SOC_AM33XX bool "AM33XX support" + depends on ARCH_MULTI_V7 default y select ARM_CPU_SUSPEND if PM select CPU_V7 @@ -408,7 +413,7 @@ config OMAP3_SDRC_AC_TIMING config OMAP4_ERRATA_I688 bool "OMAP4 errata: Async Bridge Corruption" - depends on ARCH_OMAP4 && !ARCH_MULTIPLATFORM + depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index a3e0aaa4886..cb0596b631c 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -166,7 +166,7 @@ static void __init sdp2430_display_init(void) omap_display_init(&sdp2430_dss_data); } -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) static struct omap_smc91x_platform_data board_smc91x_data = { .cs = 5, diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 812c829fa46..5b4ec51c385 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -246,7 +246,7 @@ static u32 is_gpmc_muxed(void) return 0; } -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) static struct omap_smc91x_platform_data board_smc91x_data = { .cs = 1, diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 476b82066cb..7f091c85384 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -958,6 +958,14 @@ int __init am33xx_clk_init(void) clk_set_parent(&timer3_fck, &sys_clkin_ck); clk_set_parent(&timer6_fck, &sys_clkin_ck); + /* + * The On-Chip 32K RC Osc clock is not an accurate clock-source as per + * the design/spec, so as a result, for example, timer which supposed + * to get expired @60Sec, but will expire somewhere ~@40Sec, which is + * not expected by any use-case, so change WDT1 clock source to PRCM + * 32KHz clock. + */ + clk_set_parent(&wdt1_fck, &clkdiv32k_ick); return 0; } diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 3aed4b0b956..3a0296cfcac 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -307,10 +307,10 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) _omap3_noncore_dpll_bypass(clk); /* - * Set jitter correction. No jitter correction for OMAP4 and 3630 - * since freqsel field is no longer present + * Set jitter correction. Jitter correction applicable for OMAP343X + * only since freqsel field is no longer present on other devices. */ - if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) { + if (cpu_is_omap343x()) { v = __raw_readl(dd->control_reg); v &= ~dd->freqsel_mask; v |= freqsel << __ffs(dd->freqsel_mask); @@ -480,29 +480,30 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!dd) return -EINVAL; - __clk_prepare(dd->clk_bypass); - clk_enable(dd->clk_bypass); - __clk_prepare(dd->clk_ref); - clk_enable(dd->clk_ref); - if (__clk_get_rate(dd->clk_bypass) == rate && (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { pr_debug("%s: %s: set rate: entering bypass.\n", __func__, __clk_get_name(hw->clk)); + __clk_prepare(dd->clk_bypass); + clk_enable(dd->clk_bypass); ret = _omap3_noncore_dpll_bypass(clk); if (!ret) new_parent = dd->clk_bypass; + clk_disable(dd->clk_bypass); + __clk_unprepare(dd->clk_bypass); } else { + __clk_prepare(dd->clk_ref); + clk_enable(dd->clk_ref); + if (dd->last_rounded_rate != rate) rate = __clk_round_rate(hw->clk, rate); if (dd->last_rounded_rate == 0) return -EINVAL; - /* No freqsel on AM335x, OMAP4 and OMAP3630 */ - if (!soc_is_am33xx() && !cpu_is_omap44xx() && - !cpu_is_omap3630()) { + /* Freqsel is available only on OMAP343X devices */ + if (cpu_is_omap343x()) { freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); WARN_ON(!freqsel); @@ -514,6 +515,8 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, ret = omap3_noncore_dpll_program(clk, freqsel); if (!ret) new_parent = dd->clk_ref; + clk_disable(dd->clk_ref); + __clk_unprepare(dd->clk_ref); } /* * FIXME - this is all wrong. common code handles reparenting and @@ -525,11 +528,6 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!ret) __clk_reparent(hw->clk, new_parent); - clk_disable(dd->clk_ref); - __clk_unprepare(dd->clk_ref); - clk_disable(dd->clk_bypass); - __clk_unprepare(dd->clk_bypass); - return 0; } diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index b155500e84a..b8208b4b1bd 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -26,7 +26,7 @@ #include "control.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" -#ifdef CONFIG_BRIDGE_DVFS +#ifdef CONFIG_TIDSPBRIDGE_DVFS #include "omap-pm.h" #endif @@ -35,7 +35,7 @@ static struct platform_device *omap_dsp_pdev; static struct omap_dsp_platform_data omap_dsp_pdata __initdata = { -#ifdef CONFIG_BRIDGE_DVFS +#ifdef CONFIG_TIDSPBRIDGE_DVFS .dsp_set_min_opp = omap_pm_dsp_set_min_opp, .dsp_get_opp = omap_pm_dsp_get_opp, .cpu_set_freq = omap_pm_cpu_set_freq, diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 8a68f1ec66b..ff0bc9e51aa 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -529,22 +529,28 @@ void __init omap5xxx_check_revision(void) case 0xb942: switch (rev) { case 0: - default: omap_revision = OMAP5430_REV_ES1_0; + break; + case 1: + default: + omap_revision = OMAP5430_REV_ES2_0; } break; case 0xb998: switch (rev) { case 0: - default: omap_revision = OMAP5432_REV_ES1_0; + break; + case 1: + default: + omap_revision = OMAP5432_REV_ES2_0; } break; default: /* Unknown default to latest silicon rev as default*/ - omap_revision = OMAP5430_REV_ES1_0; + omap_revision = OMAP5430_REV_ES2_0; } pr_info("OMAP%04x ES%d.0\n", diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 5c445ca1e27..e210fa830f8 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -277,6 +277,14 @@ static struct map_desc omap54xx_io_desc[] __initdata = { .length = L4_PER_54XX_SIZE, .type = MT_DEVICE, }, +#ifdef CONFIG_OMAP4_ERRATA_I688 + { + .virtual = OMAP4_SRAM_VA, + .pfn = __phys_to_pfn(OMAP4_SRAM_PA), + .length = PAGE_SIZE, + .type = MT_MEMORY_SO, + }, +#endif }; #endif @@ -329,6 +337,7 @@ void __init omap4_map_io(void) void __init omap5_map_io(void) { iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); + omap_barriers_init(); } #endif /* diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 708bb115a27..2aeb928efdf 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -240,15 +240,21 @@ void __iomem *omap4_get_sar_ram_base(void) */ static int __init omap4_sar_ram_init(void) { + unsigned long sar_base; + /* * To avoid code running on other OMAPs in * multi-omap builds */ - if (!cpu_is_omap44xx()) + if (cpu_is_omap44xx()) + sar_base = OMAP44XX_SAR_RAM_BASE; + else if (soc_is_omap54xx()) + sar_base = OMAP54XX_SAR_RAM_BASE; + else return -ENOMEM; /* Static mapping, never released */ - sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K); + sar_ram_base = ioremap(sar_base, SZ_16K); if (WARN_ON(!sar_ram_base)) return -ENOMEM; diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h index e170fe803b0..937417523b8 100644 --- a/arch/arm/mach-omap2/omap4-sar-layout.h +++ b/arch/arm/mach-omap2/omap4-sar-layout.h @@ -48,13 +48,13 @@ #define SAR_BACKUP_STATUS_WAKEUPGEN 0x10 /* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */ -#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8d4) -#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8e8) -#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x8fc) -#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x910) -#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x924) -#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x928) -#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0x92c) +#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9dc) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9f0) +#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa04) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa18) +#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0xa2c) +#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x930) +#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0xa34) #define OMAP5_SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x800) #endif diff --git a/arch/arm/mach-omap2/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h index a2582bb3cab..a086ba15868 100644 --- a/arch/arm/mach-omap2/omap54xx.h +++ b/arch/arm/mach-omap2/omap54xx.h @@ -28,5 +28,6 @@ #define OMAP54XX_PRCM_MPU_BASE 0x48243000 #define OMAP54XX_SCM_BASE 0x4a002000 #define OMAP54XX_CTRL_BASE 0x4a002800 +#define OMAP54XX_SAR_RAM_BASE 0x4ae26000 #endif /* __ASM_SOC_OMAP555554XX_H */ diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e512253601c..9553c9907d4 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -611,8 +611,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v) /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - oh->_int_flags |= _HWMOD_WAKEUP_ENABLED; - return 0; } @@ -646,8 +644,6 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED; - return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index d5dc935f606..fe5962921f0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -482,15 +482,13 @@ struct omap_hwmod_omap4_prcm { * These are for internal use only and are managed by the omap_hwmod code. * * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module - * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) - * causes the first call to _enable() to only update the pinmux */ #define _HWMOD_NO_MPU_PORT (1 << 0) -#define _HWMOD_WAKEUP_ENABLED (1 << 1) -#define _HWMOD_SYSCONFIG_LOADED (1 << 2) -#define _HWMOD_SKIP_ENABLE (1 << 3) +#define _HWMOD_SYSCONFIG_LOADED (1 << 1) +#define _HWMOD_SKIP_ENABLE (1 << 2) /* * omap_hwmod._state definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 26eee4a556a..31bea1ce3de 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -28,6 +28,7 @@ #include "prm-regbits-33xx.h" #include "i2c.h" #include "mmc.h" +#include "wd_timer.h" /* * IP blocks @@ -2087,8 +2088,21 @@ static struct omap_hwmod am33xx_uart6_hwmod = { }; /* 'wd_timer' class */ +static struct omap_hwmod_class_sysconfig wdt_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x10, + .syss_offs = 0x14, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = { .name = "wd_timer", + .sysc = &wdt_sysc, + .pre_shutdown = &omap2_wd_timer_disable, }; /* @@ -2099,6 +2113,7 @@ static struct omap_hwmod am33xx_wd_timer1_hwmod = { .name = "wd_timer2", .class = &am33xx_wd_timer_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE, .main_clk = "wdt1_fck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 8e61d80bf6b..89cad4a605d 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -52,7 +52,6 @@ enum { #define ALREADYACTIVE_SWITCH 0 #define FORCEWAKEUP_SWITCH 1 #define LOWPOWERSTATE_SWITCH 2 -#define ERROR_SWITCH 3 /* pwrdm_list contains all registered struct powerdomains */ static LIST_HEAD(pwrdm_list); @@ -233,10 +232,7 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, { u8 sleep_switch; - if (curr_pwrst < 0) { - WARN_ON(1); - sleep_switch = ERROR_SWITCH; - } else if (curr_pwrst < PWRDM_POWER_ON) { + if (curr_pwrst < PWRDM_POWER_ON) { if (curr_pwrst > pwrst && pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && arch_pwrdm->pwrdm_set_lowpwrstchange) { @@ -1091,7 +1087,8 @@ int pwrdm_post_transition(struct powerdomain *pwrdm) */ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) { - u8 curr_pwrst, next_pwrst, sleep_switch; + u8 next_pwrst, sleep_switch; + int curr_pwrst; int ret = 0; bool hwsup = false; @@ -1107,16 +1104,17 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) pwrdm_lock(pwrdm); curr_pwrst = pwrdm_read_pwrst(pwrdm); + if (curr_pwrst < 0) { + ret = -EINVAL; + goto osps_out; + } + next_pwrst = pwrdm_read_next_pwrst(pwrdm); if (curr_pwrst == pwrst && next_pwrst == pwrst) goto osps_out; sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst, pwrst, &hwsup); - if (sleep_switch == ERROR_SWITCH) { - ret = -EINVAL; - goto osps_out; - } ret = pwrdm_set_next_pwrst(pwrdm, pwrst); if (ret) diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index d35f98aabf7..415c7e0c939 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -81,13 +81,13 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = { /* Read a register in a CM/PRM instance in the PRM module */ u32 omap4_prm_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_PRM_REGADDR(inst, reg)); + return __raw_readl(prm_base + inst + reg); } /* Write into a register in a CM/PRM instance in the PRM module */ void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_PRM_REGADDR(inst, reg)); + __raw_writel(val, prm_base + inst + reg); } /* Read-modify-write a register in a PRM module. Caller must lock */ @@ -650,7 +650,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = { int __init omap44xx_prm_init(void) { - if (!cpu_is_omap44xx()) + if (!cpu_is_omap44xx() && !soc_is_omap54xx()) return 0; return prm_register(&omap44xx_prm_ll_data); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index c62116bbc76..18fdeeb3a44 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -413,7 +413,9 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP54XX_CLASS 0x54000054 #define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) +#define OMAP5430_REV_ES2_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8)) #define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) +#define OMAP5432_REV_ES2_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8)) void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index f62b509ed08..d00d89c93f1 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -62,6 +62,7 @@ #define OMAP2_MPU_SOURCE "sys_ck" #define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE #define OMAP4_MPU_SOURCE "sys_clkin_ck" +#define OMAP5_MPU_SOURCE "sys_clkin" #define OMAP2_32K_SOURCE "func_32k_ck" #define OMAP3_32K_SOURCE "omap_32k_fck" #define OMAP4_32K_SOURCE "sys_32k_ck" @@ -487,7 +488,7 @@ static void __init realtime_counter_init(void) pr_err("%s: ioremap failed\n", __func__); return; } - sys_clk = clk_get(NULL, "sys_clkin_ck"); + sys_clk = clk_get(NULL, OMAP5_MPU_SOURCE); if (IS_ERR(sys_clk)) { pr_err("%s: failed to get system clock handle\n", __func__); iounmap(base); @@ -620,7 +621,7 @@ void __init omap4_local_timer_init(void) #ifdef CONFIG_SOC_OMAP5 OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", - 2, OMAP4_MPU_SOURCE); + 2, OMAP5_MPU_SOURCE); void __init omap5_realtime_timer_init(void) { int err; diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index ad71c8a03ff..2075bf8e3d9 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -19,6 +19,7 @@ #include <linux/ata_platform.h> #include <linux/delay.h> #include <linux/clk-provider.h> +#include <linux/cpu.h> #include <net/dsa.h> #include <asm/page.h> #include <asm/setup.h> diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index 3cdc1bb8254..d195db09ea3 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -62,7 +62,11 @@ int __init harmony_pcie_init(void) goto err_reg; } - regulator_enable(regulator); + err = regulator_enable(regulator); + if (err) { + pr_err("%s: regulator_enable failed: %d\n", __func__, err); + goto err_en; + } err = tegra_pcie_init(true, true); if (err) { @@ -74,6 +78,7 @@ int __init harmony_pcie_init(void) err_pcie: regulator_disable(regulator); +err_en: regulator_put(regulator); err_reg: gpio_free(en_vdd_1v05); diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index 36dc2befa9d..9387daeeadc 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -99,12 +99,8 @@ static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, smp_wmb(); - save_cpu_arch_register(); - cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); - restore_cpu_arch_register(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); return true; diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index fd473f2b4c3..045c16f2dd5 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -7,8 +7,5 @@ ENTRY(tegra_secondary_startup) bl v7_invalidate_l1 - /* Enable coresight */ - mov32 r0, 0xC5ACCE55 - mcr p14, 0, r0, c7, c12, 6 b secondary_startup ENDPROC(tegra_secondary_startup) diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 2c6b3d55213..e78d52d83ac 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -91,7 +91,7 @@ static int tegra30_power_up_cpu(unsigned int cpu) if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) { timeout = jiffies + msecs_to_jiffies(50); do { - if (!tegra_powergate_is_powered(pwrgateid)) + if (tegra_powergate_is_powered(pwrgateid)) goto remove_clamps; udelay(10); } while (time_before(jiffies, timeout)); @@ -124,6 +124,9 @@ remove_clamps: /* Remove I/O clamps. */ ret = tegra_powergate_remove_clamping(pwrgateid); + if (ret) + return ret; + udelay(10); /* Clear flow controller CSR. */ diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 523604de666..04a8e06f59a 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -46,26 +46,11 @@ #define PMC_CPUPWROFF_TIMER 0xcc #ifdef CONFIG_PM_SLEEP -static unsigned int g_diag_reg; static DEFINE_SPINLOCK(tegra_lp2_lock); static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); static struct clk *tegra_pclk; void (*tegra_tear_down_cpu)(void); -void save_cpu_arch_register(void) -{ - /* read diagnostic register */ - asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc"); - return; -} - -void restore_cpu_arch_register(void) -{ - /* write diagnostic register */ - asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc"); - return; -} - static void set_power_timers(unsigned long us_on, unsigned long us_off) { unsigned long long ticks; @@ -119,8 +104,6 @@ static void restore_cpu_complex(void) tegra_cpu_clock_resume(); flowctrl_cpu_suspend_exit(cpu); - - restore_cpu_arch_register(); } /* @@ -145,8 +128,6 @@ static void suspend_cpu_complex(void) tegra_cpu_clock_suspend(); flowctrl_cpu_suspend_enter(cpu); - - save_cpu_arch_register(); } void tegra_clear_cpu_in_lp2(int phy_cpu_id) @@ -181,6 +162,11 @@ bool tegra_set_cpu_in_lp2(int phy_cpu_id) return last_cpu; } +int tegra_cpu_do_idle(void) +{ + return cpu_do_idle(); +} + static int tegra_sleep_cpu(unsigned long v2p) { /* Switch to the identity mapping. */ diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index c6bc8f85759..af9067e2867 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -22,6 +22,7 @@ #include <linux/debugfs.h> #include <linux/delay.h> #include <linux/err.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/io.h> #include <linux/seq_file.h> @@ -75,7 +76,7 @@ static int tegra_powergate_set(int id, bool new_state) if (status == new_state) { spin_unlock_irqrestore(&tegra_powergate_lock, flags); - return -EINVAL; + return 0; } pmc_write(PWRGATE_TOGGLE_START | id, PWRGATE_TOGGLE); @@ -168,6 +169,7 @@ err_clk: err_power: return ret; } +EXPORT_SYMBOL(tegra_powergate_sequence_power_up); int tegra_cpu_powergate_id(int cpuid) { diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 54382ceade4..e6de88a2ea0 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -41,12 +41,10 @@ */ ENTRY(tegra_resume) bl v7_invalidate_l1 - /* Enable coresight */ - mov32 r0, 0xC5ACCE55 - mcr p14, 0, r0, c7, c12, 6 cpu_id r0 cmp r0, #0 @ CPU0? + THUMB( it ne ) bne cpu_resume @ no #ifdef CONFIG_ARCH_TEGRA_3x_SOC @@ -99,6 +97,8 @@ ENTRY(__tegra_cpu_reset_handler_start) * * Register usage within the reset handler: * + * Others: scratch + * R6 = SoC ID << 8 * R7 = CPU present (to the OS) mask * R8 = CPU in LP1 state mask * R9 = CPU in LP2 state mask @@ -114,6 +114,40 @@ ENTRY(__tegra_cpu_reset_handler_start) ENTRY(__tegra_cpu_reset_handler) cpsid aif, 0x13 @ SVC mode, interrupts disabled + + mov32 r6, TEGRA_APB_MISC_BASE + ldr r6, [r6, #APB_MISC_GP_HIDREV] + and r6, r6, #0xff00 +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +t20_check: + cmp r6, #(0x20 << 8) + bne after_t20_check +t20_errata: + # Tegra20 is a Cortex-A9 r1p1 + mrc p15, 0, r0, c1, c0, 0 @ read system control register + orr r0, r0, #1 << 14 @ erratum 716044 + mcr p15, 0, r0, c1, c0, 0 @ write system control register + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 4 @ erratum 742230 + orr r0, r0, #1 << 11 @ erratum 751472 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + b after_errata +after_t20_check: +#endif +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +t30_check: + cmp r6, #(0x30 << 8) + bne after_t30_check +t30_errata: + # Tegra30 is a Cortex-A9 r2p9 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 6 @ erratum 743622 + orr r0, r0, #1 << 11 @ erratum 751472 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + b after_errata +after_t30_check: +#endif +after_errata: mrc p15, 0, r10, c0, c0, 5 @ MPIDR and r10, r10, #0x3 @ R10 = CPU number mov r11, #1 @@ -129,16 +163,13 @@ ENTRY(__tegra_cpu_reset_handler) #ifdef CONFIG_ARCH_TEGRA_2x_SOC /* Are we on Tegra20? */ - mov32 r6, TEGRA_APB_MISC_BASE - ldr r0, [r6, #APB_MISC_GP_HIDREV] - and r0, r0, #0xff00 - cmp r0, #(0x20 << 8) + cmp r6, #(0x20 << 8) bne 1f /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ - mov32 r6, TEGRA_PMC_BASE + mov32 r5, TEGRA_PMC_BASE mov r0, #0 cmp r10, #0 - strne r0, [r6, #PMC_SCRATCH41] + strne r0, [r5, #PMC_SCRATCH41] 1: #endif diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index 9f6bfafdd51..e3f2417c420 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -197,7 +197,7 @@ ENTRY(tegra20_sleep_cpu_secondary_finish) mov r3, #CPU_RESETTABLE str r3, [r0] - bl cpu_do_idle + bl tegra_cpu_do_idle /* * cpu may be reset while in wfi, which will return through diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 63a15bd9b65..d29dfcce948 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -66,7 +66,9 @@ ENTRY(tegra30_cpu_shutdown) FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \ FLOW_CTRL_CSR_ENABLE mov r4, #(1 << 4) - orr r12, r12, r4, lsl r3 + ARM( orr r12, r12, r4, lsl r3 ) + THUMB( lsl r4, r4, r3 ) + THUMB( orr r12, r12, r4 ) str r12, [r1] /* Halt this CPU. */ diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 4ffae541726..bb308eab907 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -92,7 +92,7 @@ #ifdef CONFIG_CACHE_L2X0 .macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs - adr \tmp1, \phys_l2x0_saved_regs + W(adr) \tmp1, \phys_l2x0_saved_regs ldr \tmp1, [\tmp1] ldr \tmp2, [\tmp1, #L2X0_R_PHY_BASE] ldr \tmp3, [\tmp2, #L2X0_CTRL] diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 1e49d901f2c..0320495efc4 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -95,7 +95,7 @@ #define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) /* Fast UART1 on U335 only */ -#define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) +#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000) /* * SLOW peripherals diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index ff3c9f01659..33c353bc1c4 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -30,6 +30,20 @@ struct regulator_init_data gpio_en_3v3_regulator = { .consumer_supplies = gpio_en_3v3_consumers, }; +static struct regulator_consumer_supply sdi0_reg_consumers[] = { + REGULATOR_SUPPLY("vqmmc", "sdi0"), +}; + +struct regulator_init_data sdi0_reg_init_data = { + .constraints = { + .min_uV = 1800000, + .max_uV = 2900000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdi0_reg_consumers), + .consumer_supplies = sdi0_reg_consumers, +}; + /* * TPS61052 regulator */ diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 9bece38fe93..039f5132c37 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -18,6 +18,7 @@ extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data; extern struct regulator_init_data tps61052_regulator; extern struct regulator_init_data gpio_en_3v3_regulator; +extern struct regulator_init_data sdi0_reg_init_data; void mop500_regulator_init(void); diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 7f2cb6c5e2c..6db0740128d 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -31,35 +31,6 @@ * SDI 0 (MicroSD slot) */ -/* GPIO pins used by the sdi0 level shifter */ -static int sdi0_en = -1; -static int sdi0_vsel = -1; - -static int mop500_sdi0_ios_handler(struct device *dev, struct mmc_ios *ios) -{ - switch (ios->power_mode) { - case MMC_POWER_UP: - case MMC_POWER_ON: - /* - * Level shifter voltage should depend on vdd to when deciding - * on either 1.8V or 2.9V. Once the decision has been made the - * level shifter must be disabled and re-enabled with a changed - * select signal in order to switch the voltage. Since there is - * no framework support yet for indicating 1.8V in vdd, use the - * default 2.9V. - */ - gpio_direction_output(sdi0_vsel, 0); - gpio_direction_output(sdi0_en, 1); - break; - case MMC_POWER_OFF: - gpio_direction_output(sdi0_vsel, 0); - gpio_direction_output(sdi0_en, 0); - break; - } - - return 0; -} - #ifdef CONFIG_STE_DMA40 struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, @@ -100,22 +71,6 @@ struct mmci_platform_data mop500_sdi0_data = { static void sdi0_configure(struct device *parent) { - int ret; - - ret = gpio_request(sdi0_en, "level shifter enable"); - if (!ret) - ret = gpio_request(sdi0_vsel, - "level shifter 1v8-3v select"); - - if (ret) { - pr_warning("unable to config sdi0 gpios for level shifter.\n"); - return; - } - - /* Select the default 2.9V and enable level shifter */ - gpio_direction_output(sdi0_vsel, 0); - gpio_direction_output(sdi0_en, 1); - /* Add the device, force v2 to subrevision 1 */ db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID); } @@ -123,8 +78,6 @@ static void sdi0_configure(struct device *parent) void mop500_sdi_tc35892_init(struct device *parent) { mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD; - sdi0_en = GPIO_SDMMC_EN; - sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL; sdi0_configure(parent); } @@ -263,8 +216,6 @@ void __init snowball_sdi_init(struct device *parent) /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; mop500_sdi0_data.cd_invert = true; - sdi0_en = SNOWBALL_SDMMC_EN_GPIO; - sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; sdi0_configure(parent); } @@ -276,8 +227,6 @@ void __init hrefv60_sdi_init(struct device *parent) db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* External Micro SD slot */ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; - sdi0_en = HREFV60_SDMMC_EN_GPIO; - sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; sdi0_configure(parent); /* WLAN SDIO channel */ db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID); diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index ce672378a83..574916b70b2 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -25,6 +25,8 @@ #include <linux/mfd/abx500/ab8500.h> #include <linux/regulator/ab8500.h> #include <linux/regulator/fixed.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/gpio-regulator.h> #include <linux/mfd/tc3589x.h> #include <linux/mfd/tps6105x.h> #include <linux/mfd/abx500/ab8500-gpio.h> @@ -90,6 +92,37 @@ static struct platform_device snowball_gpio_en_3v3_regulator_dev = { }, }; +/* Dynamically populated. */ +static struct gpio sdi0_reg_gpios[] = { + { 0, GPIOF_OUT_INIT_LOW, "mmci_vsel" }, +}; + +static struct gpio_regulator_state sdi0_reg_states[] = { + { .value = 2900000, .gpios = (0 << 0) }, + { .value = 1800000, .gpios = (1 << 0) }, +}; + +static struct gpio_regulator_config sdi0_reg_info = { + .supply_name = "ext-mmc-level-shifter", + .gpios = sdi0_reg_gpios, + .nr_gpios = ARRAY_SIZE(sdi0_reg_gpios), + .states = sdi0_reg_states, + .nr_states = ARRAY_SIZE(sdi0_reg_states), + .type = REGULATOR_VOLTAGE, + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &sdi0_reg_init_data, + .startup_delay = 100, +}; + +static struct platform_device sdi0_regulator = { + .name = "gpio-regulator", + .id = -1, + .dev = { + .platform_data = &sdi0_reg_info, + }, +}; + static struct abx500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_PIN_GPIO(1), }; @@ -488,6 +521,7 @@ static struct hash_platform_data u8500_hash1_platform_data = { /* add any platform devices here - TODO */ static struct platform_device *mop500_platform_devs[] __initdata = { &mop500_gpio_keys_device, + &sdi0_regulator, }; #ifdef CONFIG_STE_DMA40 @@ -631,6 +665,7 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_gpio_en_3v3_regulator_dev, &u8500_thsens_device, &u8500_cpufreq_cooling_device, + &sdi0_regulator, }; static void __init mop500_init_machine(void) @@ -642,6 +677,9 @@ static void __init mop500_init_machine(void) platform_device_register(&db8500_prcmu_device); mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + sdi0_reg_info.enable_gpio = GPIO_SDMMC_EN; + sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL; + mop500_pinmaps_init(); parent = u8500_init_devices(&ab8500_platdata); @@ -675,6 +713,10 @@ static void __init snowball_init_machine(void) int i; platform_device_register(&db8500_prcmu_device); + + sdi0_reg_info.enable_gpio = SNOWBALL_SDMMC_EN_GPIO; + sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO; + snowball_pinmaps_init(); parent = u8500_init_devices(&ab8500_platdata); @@ -710,6 +752,9 @@ static void __init hrefv60_init_machine(void) */ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; + sdi0_reg_info.enable_gpio = HREFV60_SDMMC_EN_GPIO; + sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO; + hrefv60_pinmaps_init(); parent = u8500_init_devices(&ab8500_platdata); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index f1a58184437..5c6c2e63386 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -282,6 +282,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), + OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL), /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), |