summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorKevin Wells <wellsk40@gmail.com>2010-07-27 08:35:56 -0700
committerKevin Wells <wellsk40@gmail.com>2010-07-27 08:35:56 -0700
commit3c0e1947d9c171649f3bde13d1010ac6d7ce09c1 (patch)
tree2cd113b5d28f11dd7c6e3125abbe50ef35de83e9 /arch/arm
parentc4a0208fff6cba5c7e22166ad7209322eab16bb3 (diff)
ARM: LPC32XX: System suspend support
Support for system suspend and resume Signed-off-by: Kevin Wells <wellsk40@gmail.com>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-lpc32xx/pm.c146
-rw-r--r--arch/arm/mach-lpc32xx/suspend.S151
2 files changed, 297 insertions, 0 deletions
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
new file mode 100644
index 00000000000..a6e2aed9a49
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -0,0 +1,146 @@
+/*
+ * arch/arm/mach-lpc32xx/pm.c
+ *
+ * Original authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ * Modified by Kevin Wells <kevin.wells@nxp.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * LPC32XX CPU and system power management
+ *
+ * The LCP32XX has three CPU modes for controlling system power: run,
+ * direct-run, and halt modes. When switching between halt and run modes,
+ * the CPU transistions through direct-run mode. For Linux, direct-run
+ * mode is not used in normal operation. Halt mode is used when the
+ * system is fully suspended.
+ *
+ * Run mode:
+ * The ARM CPU clock (HCLK_PLL), HCLK bus clock, and PCLK bus clocks are
+ * derived from the HCLK PLL. The HCLK and PCLK bus rates are divided from
+ * the HCLK_PLL rate. Linux runs in this mode.
+ *
+ * Direct-run mode:
+ * The ARM CPU clock, HCLK bus clock, and PCLK bus clocks are driven from
+ * SYSCLK. SYSCLK is usually around 13MHz, but may vary based on SYSCLK
+ * source or the frequency of the main oscillator. In this mode, the
+ * HCLK_PLL can be safely enabled, changed, or disabled.
+ *
+ * Halt mode:
+ * SYSCLK is gated off and the CPU and system clocks are halted.
+ * Peripherals based on the 32KHz oscillator clock (ie, RTC, touch,
+ * key scanner, etc.) still operate if enabled. In this state, an enabled
+ * system event (ie, GPIO state change, RTC match, key press, etc.) will
+ * wake the system up back into direct-run mode.
+ *
+ * DRAM refresh
+ * DRAM clocking and refresh are slightly different for systems with DDR
+ * DRAM or regular SDRAM devices. If SDRAM is used in the system, the
+ * SDRAM will still be accessible in direct-run mode. In DDR based systems,
+ * a transistion to direct-run mode will stop all DDR accesses (no clocks).
+ * Because of this, the code to switch power modes and the code to enter
+ * and exit DRAM self-refresh modes must not be executed in DRAM. A small
+ * section of IRAM is used instead for this.
+ *
+ * Suspend is handled with the following logic:
+ * Backup a small area of IRAM used for the suspend code
+ * Copy suspend code to IRAM
+ * Transfer control to code in IRAM
+ * Places DRAMs in self-refresh mode
+ * Enter direct-run mode
+ * Save state of HCLK_PLL PLL
+ * Disable HCLK_PLL PLL
+ * Enter halt mode - CPU and buses will stop
+ * System enters direct-run mode when an enabled event occurs
+ * HCLK PLL state is restored
+ * Run mode is entered
+ * DRAMS are placed back into normal mode
+ * Code execution returns from IRAM
+ * IRAM code are used for suspend is restored
+ * Suspend mode is exited
+ */
+
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+#include "clock.h"
+
+#define TEMP_IRAM_AREA IO_ADDRESS(LPC32XX_IRAM_BASE)
+
+/*
+ * Both STANDBY and MEM suspend states are handled the same with no
+ * loss of CPU or memory state
+ */
+static int lpc32xx_pm_enter(suspend_state_t state)
+{
+ int (*lpc32xx_suspend_ptr) (void);
+ void *iram_swap_area;
+
+ /* Allocate some space for temporary IRAM storage */
+ iram_swap_area = kmalloc(lpc32xx_sys_suspend_sz, GFP_KERNEL);
+ if (!iram_swap_area) {
+ printk(KERN_ERR
+ "PM Suspend: cannot allocate memory to save portion "
+ "of SRAM\n");
+ return -ENOMEM;
+ }
+
+ /* Backup a small area of IRAM used for the suspend code */
+ memcpy(iram_swap_area, (void *) TEMP_IRAM_AREA,
+ lpc32xx_sys_suspend_sz);
+
+ /*
+ * Copy code to suspend system into IRAM. The suspend code
+ * needs to run from IRAM as DRAM may no longer be available
+ * when the PLL is stopped.
+ */
+ memcpy((void *) TEMP_IRAM_AREA, &lpc32xx_sys_suspend,
+ lpc32xx_sys_suspend_sz);
+ flush_icache_range((unsigned long)TEMP_IRAM_AREA,
+ (unsigned long)(TEMP_IRAM_AREA) + lpc32xx_sys_suspend_sz);
+
+ /* Transfer to suspend code in IRAM */
+ lpc32xx_suspend_ptr = (void *) TEMP_IRAM_AREA;
+ flush_cache_all();
+ (void) lpc32xx_suspend_ptr();
+
+ /* Restore original IRAM contents */
+ memcpy((void *) TEMP_IRAM_AREA, iram_swap_area,
+ lpc32xx_sys_suspend_sz);
+
+ kfree(iram_swap_area);
+
+ return 0;
+}
+
+static struct platform_suspend_ops lpc32xx_pm_ops = {
+ .valid = suspend_valid_only_mem,
+ .enter = lpc32xx_pm_enter,
+};
+
+#define EMC_DYN_MEM_CTRL_OFS 0x20
+#define EMC_SRMMC (1 << 3)
+#define EMC_CTRL_REG io_p2v(LPC32XX_EMC_BASE + EMC_DYN_MEM_CTRL_OFS)
+static int __init lpc32xx_pm_init(void)
+{
+ /*
+ * Setup SDRAM self-refresh clock to automatically disable o
+ * start of self-refresh. This only needs to be done once.
+ */
+ __raw_writel(__raw_readl(EMC_CTRL_REG) | EMC_SRMMC, EMC_CTRL_REG);
+
+ suspend_set_ops(&lpc32xx_pm_ops);
+
+ return 0;
+}
+arch_initcall(lpc32xx_pm_init);
diff --git a/arch/arm/mach-lpc32xx/suspend.S b/arch/arm/mach-lpc32xx/suspend.S
new file mode 100644
index 00000000000..374f9f07fe4
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/suspend.S
@@ -0,0 +1,151 @@
+/*
+ * arch/arm/mach-lpc32xx/suspend.S
+ *
+ * Original authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
+ * Modified by Kevin Wells <kevin.wells@nxp.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
+
+/* Using named register defines makes the code easier to follow */
+#define WORK1_REG r0
+#define WORK2_REG r1
+#define SAVED_HCLK_DIV_REG r2
+#define SAVED_HCLK_PLL_REG r3
+#define SAVED_DRAM_CLKCTRL_REG r4
+#define SAVED_PWR_CTRL_REG r5
+#define CLKPWRBASE_REG r6
+#define EMCBASE_REG r7
+
+#define LPC32XX_EMC_STATUS_OFFS 0x04
+#define LPC32XX_EMC_STATUS_BUSY 0x1
+#define LPC32XX_EMC_STATUS_SELF_RFSH 0x4
+
+#define LPC32XX_CLKPWR_PWR_CTRL_OFFS 0x44
+#define LPC32XX_CLKPWR_HCLK_DIV_OFFS 0x40
+#define LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS 0x58
+
+#define CLKPWR_PCLK_DIV_MASK 0xFFFFFE7F
+
+ .text
+
+ENTRY(lpc32xx_sys_suspend)
+ @ Save a copy of the used registers in IRAM, r0 is corrupted
+ adr r0, tmp_stack_end
+ stmfd r0!, {r3 - r7, sp, lr}
+
+ @ Load a few common register addresses
+ adr WORK1_REG, reg_bases
+ ldr CLKPWRBASE_REG, [WORK1_REG, #0]
+ ldr EMCBASE_REG, [WORK1_REG, #4]
+
+ ldr SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+ orr WORK1_REG, SAVED_PWR_CTRL_REG, #LPC32XX_CLKPWR_SDRAM_SELF_RFSH
+
+ @ Wait for SDRAM busy status to go busy and then idle
+ @ This guarantees a small windows where DRAM isn't busy
+1:
+ ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+ and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+ cmp WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+ bne 1b @ Branch while idle
+2:
+ ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+ and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+ cmp WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+ beq 2b @ Branch until idle
+
+ @ Setup self-refresh with support for manual exit of
+ @ self-refresh mode
+ str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+ orr WORK2_REG, WORK1_REG, #LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
+ str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+ str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+ @ Wait for self-refresh acknowledge, clocks to the DRAM device
+ @ will automatically stop on start of self-refresh
+3:
+ ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+ and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+ cmp WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+ bne 3b @ Branch until self-refresh mode starts
+
+ @ Enter direct-run mode from run mode
+ bic WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_SELECT_RUN_MODE
+ str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+ @ Safe disable of DRAM clock in EMC block, prevents DDR sync
+ @ issues on restart
+ ldr SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+ and WORK2_REG, SAVED_HCLK_DIV_REG, #CLKPWR_PCLK_DIV_MASK
+ str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+
+ @ Save HCLK PLL state and disable HCLK PLL
+ ldr SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+ bic WORK2_REG, SAVED_HCLK_PLL_REG, #LPC32XX_CLKPWR_HCLKPLL_POWER_UP
+ str WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+
+ @ Enter stop mode until an enabled event occurs
+ orr WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
+ str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+ .rept 9
+ nop
+ .endr
+
+ @ Clear stop status
+ bic WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
+
+ @ Restore original HCLK PLL value and wait for PLL lock
+ str SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+4:
+ ldr WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+ and WORK2_REG, WORK2_REG, #LPC32XX_CLKPWR_HCLKPLL_PLL_STS
+ bne 4b
+
+ @ Re-enter run mode with self-refresh flag cleared, but no DRAM
+ @ update yet. DRAM is still in self-refresh
+ str SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+ @ Restore original DRAM clock mode to restore DRAM clocks
+ str SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+
+ @ Clear self-refresh mode
+ orr WORK1_REG, SAVED_PWR_CTRL_REG,\
+ #LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
+ str WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+ str SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+ #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+ @ Wait for EMC to clear self-refresh mode
+5:
+ ldr WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+ and WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+ bne 5b @ Branch until self-refresh has exited
+
+ @ restore regs and return
+ adr r0, tmp_stack
+ ldmfd r0!, {r3 - r7, sp, pc}
+
+reg_bases:
+ .long IO_ADDRESS(LPC32XX_CLK_PM_BASE)
+ .long IO_ADDRESS(LPC32XX_EMC_BASE)
+
+tmp_stack:
+ .long 0, 0, 0, 0, 0, 0, 0
+tmp_stack_end:
+
+ENTRY(lpc32xx_sys_suspend_sz)
+ .word . - lpc32xx_sys_suspend