Merge branch 'sa11x0-lcd' into sa11x0

Conflicts:
	arch/arm/mach-sa1100/assabet.c

10 files changed, 275 insertions, 55 deletions

diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index e2d411a8d4c..c3f5064df4b 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,6 +20,8 @@
 #include <linux/delay.h>
 #include <linux/mm.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -69,33 +71,6 @@ void ASSABET_BCR_frob(unsigned int mask, unsigned int val)
 
 EXPORT_SYMBOL(ASSABET_BCR_frob);
 
-static void assabet_backlight_power(int on)
-{
-#ifndef ASSABET_PAL_VIDEO
-	if (on)
-		ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON);
-	else
-#endif
-		ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
-}
-
-/*
- * Turn on/off the backlight.  When turning the backlight on,
- * we wait 500us after turning it on so we don't cause the
- * supplies to droop when we enable the LCD controller (and
- * cause a hard reset.)
- */
-static void assabet_lcd_power(int on)
-{
-#ifndef ASSABET_PAL_VIDEO
-	if (on) {
-		ASSABET_BCR_set(ASSABET_BCR_LCD_ON);
-		udelay(500);
-	} else
-#endif
-		ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
-}
-
 
 /*
  * Assabet flash support code.
@@ -197,6 +172,99 @@ static struct mcp_plat_data assabet_mcp_data = {
 	.sclk_rate	= 11981000,
 };
 
+static void assabet_lcd_set_visual(u32 visual)
+{
+	u_int is_true_color = visual == FB_VISUAL_TRUECOLOR;
+
+	if (machine_is_assabet()) {
+#if 1		// phase 4 or newer Assabet's
+		if (is_true_color)
+			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
+		else
+			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
+#else
+		// older Assabet's
+		if (is_true_color)
+			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
+		else
+			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
+#endif
+	}
+}
+
+#ifndef ASSABET_PAL_VIDEO
+static void assabet_lcd_backlight_power(int on)
+{
+	if (on)
+		ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON);
+	else
+		ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
+}
+
+/*
+ * Turn on/off the backlight.  When turning the backlight on, we wait
+ * 500us after turning it on so we don't cause the supplies to droop
+ * when we enable the LCD controller (and cause a hard reset.)
+ */
+static void assabet_lcd_power(int on)
+{
+	if (on) {
+		ASSABET_BCR_set(ASSABET_BCR_LCD_ON);
+		udelay(500);
+	} else
+		ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
+}
+
+/*
+ * The assabet uses a sharp LQ039Q2DS54 LCD module.  It is actually
+ * takes an RGB666 signal, but we provide it with an RGB565 signal
+ * instead (def_rgb_16).
+ */
+static struct sa1100fb_mach_info lq039q2ds54_info = {
+	.pixclock	= 171521,	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 5,		.vsync_len	= 1,
+	.left_margin	= 61,		.upper_margin	= 3,
+	.right_margin	= 9,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+	.backlight_power = assabet_lcd_backlight_power,
+	.lcd_power = assabet_lcd_power,
+	.set_visual = assabet_lcd_set_visual,
+};
+#else
+static void assabet_pal_backlight_power(int on)
+{
+	ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
+}
+
+static void assabet_pal_power(int on)
+{
+	ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
+}
+
+static struct sa1100fb_mach_info pal_info = {
+	.pixclock	= 67797,	.bpp		= 16,
+	.xres		= 640,		.yres		= 512,
+
+	.hsync_len	= 64,		.vsync_len	= 6,
+	.left_margin	= 125,		.upper_margin	= 70,
+	.right_margin	= 115,		.lower_margin	= 36,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+
+	.backlight_power = assabet_pal_backlight_power,
+	.lcd_power = assabet_pal_power,
+	.set_visual = assabet_lcd_set_visual,
+};
+#endif
+
 #ifdef CONFIG_ASSABET_NEPONSET
 static struct resource neponset_resources[] = {
 	DEFINE_RES_MEM(0x10000000, 0x08000000),
@@ -241,9 +309,6 @@ static void __init assabet_init(void)
 	PPDR |= PPC_TXD3 | PPC_TXD1;
 	PPSR |= PPC_TXD3 | PPC_TXD1;
 
-	sa1100fb_lcd_power = assabet_lcd_power;
-	sa1100fb_backlight_power = assabet_backlight_power;
-
 	if (machine_has_neponset()) {
 		/*
 		 * Angel sets this, but other bootloaders may not.
@@ -262,6 +327,11 @@ static void __init assabet_init(void)
 #endif
 	}
 
+#ifndef ASSABET_PAL_VIDEO
+	sa11x0_register_lcd(&lq039q2ds54_info);
+#else
+	sa11x0_register_lcd(&pal_video);
+#endif
 	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
 			    ARRAY_SIZE(assabet_flash_resources));
 	sa11x0_register_irda(&assabet_irda_data);
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index dbe5cf719f7..841041e1181 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -28,6 +28,8 @@
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -294,6 +296,20 @@ static struct resource collie_flash_resources[] = {
 	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
 };
 
+static struct sa1100fb_mach_info collie_lcd_info = {
+	.pixclock	= 171521,	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 5,		.vsync_len	= 1,
+	.left_margin	= 11,		.upper_margin	= 2,
+	.right_margin	= 30,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+};
+
 static void __init collie_init(void)
 {
 	int ret = 0;
@@ -332,6 +348,7 @@ static void __init collie_init(void)
 		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
 	}
 
+	sa11x0_register_lcd(&collie_lcd_info);
 	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
 			    ARRAY_SIZE(collie_flash_resources));
 	sa11x0_register_mcp(&collie_mcp_data);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 01a20ea35b5..0296d69622a 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -20,6 +20,8 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/div64.h>
 #include <mach/hardware.h>
 #include <asm/system.h>
@@ -247,6 +249,11 @@ static struct platform_device sa11x0fb_device = {
 	.resource	= sa11x0fb_resources,
 };
 
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf)
+{
+	sa11x0_register_device(&sa11x0fb_device, inf);
+}
+
 static struct platform_device sa11x0pcmcia_device = {
 	.name		= "sa11x0-pcmcia",
 	.id		= -1,
@@ -319,7 +326,6 @@ static struct platform_device *sa11x0_devices[] __initdata = {
 	&sa11x0uart3_device,
 	&sa11x0ssp_device,
 	&sa11x0pcmcia_device,
-	&sa11x0fb_device,
 	&sa11x0rtc_device,
 	&sa11x0dma_device,
 };
@@ -332,12 +338,6 @@ static int __init sa1100_init(void)
 
 arch_initcall(sa1100_init);
 
-void (*sa1100fb_backlight_power)(int on);
-void (*sa1100fb_lcd_power)(int on);
-
-EXPORT_SYMBOL(sa1100fb_backlight_power);
-EXPORT_SYMBOL(sa1100fb_lcd_power);
-
 
 /*
  * Common I/O mapping:
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 33268cf6be3..5c68be858e0 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -16,9 +16,6 @@ extern void sa11x0_restart(char, const char *);
 	mi->bank[__nr].start = (__start), \
 	mi->bank[__nr].size = (__size)
 
-extern void (*sa1100fb_backlight_power)(int on);
-extern void (*sa1100fb_lcd_power)(int on);
-
 extern void sa1110_mb_enable(void);
 extern void sa1110_mb_disable(void);
 
@@ -40,3 +37,6 @@ void sa11x0_register_irda(struct irda_platform_data *irda);
 
 struct mcp_plat_data;
 void sa11x0_register_mcp(struct mcp_plat_data *data);
+
+struct sa1100fb_mach_info;
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 1e6b3c105ba..f23e7d0b2fb 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -14,6 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irda.h>
@@ -36,13 +38,28 @@ static void h3100_lcd_power(int enable)
 	}
 }
 
+static struct sa1100fb_mach_info h3100_lcd_info = {
+	.pixclock	= 406977, 	.bpp		= 4,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 26,		.vsync_len	= 41,
+	.left_margin	= 4,		.upper_margin	= 0,
+	.right_margin	= 4,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.cmap_greyscale	= 1,
+	.cmap_inverse	= 1,
+
+	.lccr0		= LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+	.lcd_power = h3100_lcd_power,
+};
 
 static void __init h3100_map_io(void)
 {
 	h3xxx_map_io();
 
-	sa1100fb_lcd_power = h3100_lcd_power;
-
 	/* Older bootldrs put GPIO2-9 in alternate mode on the
 	   assumption that they are used for video */
 	GAFR &= ~0x000001fb;
@@ -80,6 +97,8 @@ static void __init h3100_mach_init(void)
 {
 	h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
 	h3xxx_mach_init();
+
+	sa11x0_register_lcd(&h3100_lcd_info);
 	sa11x0_register_irda(&h3100_irda_data);
 }
 
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 6b58e7460ec..2feac56ec90 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -14,6 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irda.h>
@@ -56,11 +58,35 @@ err2:	gpio_free(H3XXX_EGPIO_LCD_ON);
 err1:	return;
 }
 
+static const struct sa1100fb_rgb h3600_rgb_16 = {
+	.red	= { .offset = 12, .length = 4, },
+	.green	= { .offset = 7,  .length = 4, },
+	.blue	= { .offset = 1,  .length = 4, },
+	.transp	= { .offset = 0,  .length = 0, },
+};
+
+static struct sa1100fb_mach_info h3600_lcd_info = {
+	.pixclock	= 174757, 	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 3,		.vsync_len	= 3,
+	.left_margin	= 12,		.upper_margin	= 10,
+	.right_margin	= 17,		.lower_margin	= 1,
+
+	.cmap_static	= 1,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+	.rgb[RGB_16] = &h3600_rgb_16,
+
+	.lcd_power = h3600_lcd_power,
+};
+
+
 static void __init h3600_map_io(void)
 {
 	h3xxx_map_io();
-
-	sa1100fb_lcd_power = h3600_lcd_power;
 }
 
 /*
@@ -121,6 +147,8 @@ static void __init h3600_mach_init(void)
 {
 	h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
 	h3xxx_mach_init();
+
+	sa11x0_register_lcd(&h3600_lcd_info);
 	sa11x0_register_irda(&h3600_irda_data);
 }
 
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index 335a1ff21fa..3f2d1b60188 100644
--- a/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -1688,16 +1688,6 @@
 #define LCD_Int100_0A	0xF     	/* LCD Intensity = 100.0% =  1     */
                 	        	/* (Alternative)                   */
 
-#define LCCR0		__REG(0xB0100000)  /* LCD Control Reg. 0 */
-#define LCSR		__REG(0xB0100004)  /* LCD Status Reg. */
-#define DBAR1		__REG(0xB0100010)  /* LCD DMA Base Address Reg. channel 1 */
-#define DCAR1		__REG(0xB0100014)  /* LCD DMA Current Address Reg. channel 1 */
-#define DBAR2		__REG(0xB0100018)  /* LCD DMA Base Address Reg.  channel 2 */
-#define DCAR2		__REG(0xB010001C)  /* LCD DMA Current Address Reg. channel 2 */
-#define LCCR1		__REG(0xB0100020)  /* LCD Control Reg. 1 */
-#define LCCR2		__REG(0xB0100024)  /* LCD Control Reg. 2 */
-#define LCCR3		__REG(0xB0100028)  /* LCD Control Reg. 3 */
-
 #define LCCR0_LEN	0x00000001	/* LCD ENable                      */
 #define LCCR0_CMS	0x00000002	/* Color/Monochrome display Select */
 #define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display                  */
diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
index ec27d6e1214..a0d1114c45e 100644
--- a/arch/arm/mach-sa1100/include/mach/shannon.h
+++ b/arch/arm/mach-sa1100/include/mach/shannon.h
@@ -21,7 +21,7 @@
 #define SHANNON_GPIO_U3_RTS		GPIO_GPIO (19)	/* ?? */
 #define SHANNON_GPIO_U3_CTS		GPIO_GPIO (20)	/* ?? */
 #define SHANNON_GPIO_SENSE_12V		GPIO_GPIO (21)	/* Input, 12v flash unprotect detected */
-#define SHANNON_GPIO_DISP_EN		GPIO_GPIO (22)	/* out */
+#define SHANNON_GPIO_DISP_EN		22		/* out */
 /* XXX GPIO 23 unaccounted for */
 #define SHANNON_GPIO_EJECT_0		GPIO_GPIO (24)	/* in */
 #define SHANNON_IRQ_GPIO_EJECT_0	IRQ_GPIO24
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index af4e2761f3d..463a322a425 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,6 +6,8 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -26,8 +28,85 @@ static struct mcp_plat_data lart_mcp_data = {
 	.sclk_rate	= 11981000,
 };
 
+#ifdef LART_GREY_LCD
+static struct sa1100fb_mach_info lart_grey_info = {
+	.pixclock	= 150000,	.bpp		= 4,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 1,		.vsync_len	= 1,
+	.left_margin	= 4,		.upper_margin	= 0,
+	.right_margin	= 2,		.lower_margin	= 0,
+
+	.cmap_greyscale	= 1,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_COLOR_LCD
+static struct sa1100fb_mach_info lart_color_info = {
+	.pixclock	= 150000,	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 2,		.vsync_len	= 3,
+	.left_margin	= 69,		.upper_margin	= 14,
+	.right_margin	= 8,		.lower_margin	= 4,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_VIDEO_OUT
+static struct sa1100fb_mach_info lart_video_info = {
+	.pixclock	= 39721,	.bpp		= 16,
+	.xres		= 640,		.yres		= 480,
+
+	.hsync_len	= 95,		.vsync_len	= 2,
+	.left_margin	= 40,		.upper_margin	= 32,
+	.right_margin	= 24,		.lower_margin	= 11,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+
+#ifdef LART_KIT01_LCD
+static struct sa1100fb_mach_info lart_kit01_info = {
+	.pixclock	= 63291,	.bpp		= 16,
+	.xres		= 640,		.yres		= 480,
+
+	.hsync_len	= 64,		.vsync_len	= 3,
+	.left_margin	= 122,		.upper_margin	= 45,
+	.right_margin	= 10,		.lower_margin	= 10,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg
+};
+#endif
+
 static void __init lart_init(void)
 {
+	struct sa1100fb_mach_info *inf = NULL;
+
+#ifdef LART_GREY_LCD
+	inf = &lart_grey_info;
+#endif
+#ifdef LART_COLOR_LCD
+	inf = &lart_color_info;
+#endif
+#ifdef LART_VIDEO_OUT
+	inf = &lart_video_info;
+#endif
+#ifdef LART_KIT01_LCD
+	inf = &lart_kit01_info;
+#endif
+
+	if (inf)
+		sa11x0_register_lcd(inf);
+
 	sa11x0_register_mcp(&lart_mcp_data);
 }
 
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 5fd61564984..77b2b9b522a 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,6 +9,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
@@ -54,8 +56,23 @@ static struct mcp_plat_data shannon_mcp_data = {
 	.sclk_rate	= 11981000,
 };
 
+static struct sa1100fb_mach_info shannon_lcd_info = {
+	.pixclock	= 152500,	.bpp		= 8,
+	.xres		= 640,		.yres		= 480,
+
+	.hsync_len	= 4,		.vsync_len	= 3,
+	.left_margin	= 2,		.upper_margin	= 0,
+	.right_margin	= 1,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
+	.lccr3		= LCCR3_ACBsDiv(512),
+};
+
 static void __init shannon_init(void)
 {
+	sa11x0_register_lcd(&shannon_lcd_info);
 	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
 	sa11x0_register_mcp(&shannon_mcp_data);
 }