diff options
| author | Thomas Reitmayr <treitmayr@devbase.at> | 2009-05-19 19:35:26 +0200 |
|---|---|---|
| committer | Nicolas Pitre <nico@cam.org> | 2009-05-20 22:17:32 -0400 |
| commit | 385aa9e7012d35b017981e67b3464aef4e1e7108 (patch) | |
| tree | ba07f40b155a650629a47279d4da132b14ddc64d /arch/arm | |
| parent | 03fbdb15c14e9746c63168e3ff2c64b9c8336d33 (diff) | |
[ARM] Kirkwood: Correct MPP for SATA activity/presence LEDs of QNAP TS-119/TS-219.
For the QNAP TS-119 and TS-219 the wrong MPPs were used for the SATA
activity/presence LEDs. The new settings make these LEDs work as
expected.
Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/mach-kirkwood/ts219-setup.c | 6 |
1 files changed, 2 insertions, 4 deletions
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index dda5743cf3e..01aa213c0a6 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP1_SPI_MOSI, MPP2_SPI_SCK, MPP3_SPI_MISO, + MPP4_SATA1_ACTn, + MPP5_SATA0_ACTn, MPP8_TW_SDA, MPP9_TW_SCK, MPP10_UART0_TXD, @@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP14_UART1_RXD, /* PIC controller */ MPP15_GPIO, /* USB Copy button */ MPP16_GPIO, /* Reset button */ - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_SATA1_PRESENTn, - MPP23_SATA0_PRESENTn, 0 }; |