Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine update from Vinod Koul:
 "This includes the cookie cleanup by Russell, the addition of context
  parameter for dmaengine APIs, more arm dmaengine driver cleanup by
  moving code to dmaengine, this time for imx by Javier and pl330 by
  Boojin along with the usual driver fixes."

Fix up some fairly trivial conflicts with various other cleanups.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits)
  dmaengine: imx: fix the build failure on x86_64
  dmaengine: i.MX: Fix merge of cookie branch.
  dmaengine: i.MX: Add support for interleaved transfers.
  dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages.
  dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'.
  dmaengine: imx-dma: remove unused arg of imxdma_sg_next.
  dmaengine: imx-dma: remove internal structure.
  dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure.
  dmaengine: imx-dma: remove 'in_use' field of 'internal' structure.
  dmaengine: imx-dma: remove sg member from internal structure.
  dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function.
  dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function.
  dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.
  dmaengine: imx-dma: remove dma_mode member of internal structure.
  dmaengine: imx-dma: remove data member from internal structure.
  dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c
  dmaengine: at_hdmac: add slave config operation
  dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic
  dmaengine/dma_slave: introduce inline wrappers
  dma: imx-sdma: Treat firmware messages as warnings instead of erros
  ...

13 files changed, 3 insertions, 3159 deletions

diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 3bb1d7589bd..283fa1d804f 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -24,9 +24,6 @@ config ARM_VIC_NR
 config ICST
 	bool
 
-config PL330
-	bool
-
 config SA1111
 	bool
 	select DMABOUNCE if !ARCH_PXA
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 69feafe7286..215816f1775 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -5,7 +5,6 @@
 obj-$(CONFIG_ARM_GIC)		+= gic.o
 obj-$(CONFIG_ARM_VIC)		+= vic.o
 obj-$(CONFIG_ICST)		+= icst.o
-obj-$(CONFIG_PL330)		+= pl330.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
deleted file mode 100644
index ff3ad224482..00000000000
--- a/arch/arm/common/pl330.c
+++ /dev/null
@@ -1,1960 +0,0 @@
-/* linux/arch/arm/common/pl330.c
- *
- * Copyright (C) 2010 Samsung Electronics Co Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/hardware/pl330.h>
-
-/* Register and Bit field Definitions */
-#define DS		0x0
-#define DS_ST_STOP	0x0
-#define DS_ST_EXEC	0x1
-#define DS_ST_CMISS	0x2
-#define DS_ST_UPDTPC	0x3
-#define DS_ST_WFE	0x4
-#define DS_ST_ATBRR	0x5
-#define DS_ST_QBUSY	0x6
-#define DS_ST_WFP	0x7
-#define DS_ST_KILL	0x8
-#define DS_ST_CMPLT	0x9
-#define DS_ST_FLTCMP	0xe
-#define DS_ST_FAULT	0xf
-
-#define DPC		0x4
-#define INTEN		0x20
-#define ES		0x24
-#define INTSTATUS	0x28
-#define INTCLR		0x2c
-#define FSM		0x30
-#define FSC		0x34
-#define FTM		0x38
-
-#define _FTC		0x40
-#define FTC(n)		(_FTC + (n)*0x4)
-
-#define _CS		0x100
-#define CS(n)		(_CS + (n)*0x8)
-#define CS_CNS		(1 << 21)
-
-#define _CPC		0x104
-#define CPC(n)		(_CPC + (n)*0x8)
-
-#define _SA		0x400
-#define SA(n)		(_SA + (n)*0x20)
-
-#define _DA		0x404
-#define DA(n)		(_DA + (n)*0x20)
-
-#define _CC		0x408
-#define CC(n)		(_CC + (n)*0x20)
-
-#define CC_SRCINC	(1 << 0)
-#define CC_DSTINC	(1 << 14)
-#define CC_SRCPRI	(1 << 8)
-#define CC_DSTPRI	(1 << 22)
-#define CC_SRCNS	(1 << 9)
-#define CC_DSTNS	(1 << 23)
-#define CC_SRCIA	(1 << 10)
-#define CC_DSTIA	(1 << 24)
-#define CC_SRCBRSTLEN_SHFT	4
-#define CC_DSTBRSTLEN_SHFT	18
-#define CC_SRCBRSTSIZE_SHFT	1
-#define CC_DSTBRSTSIZE_SHFT	15
-#define CC_SRCCCTRL_SHFT	11
-#define CC_SRCCCTRL_MASK	0x7
-#define CC_DSTCCTRL_SHFT	25
-#define CC_DRCCCTRL_MASK	0x7
-#define CC_SWAP_SHFT	28
-
-#define _LC0		0x40c
-#define LC0(n)		(_LC0 + (n)*0x20)
-
-#define _LC1		0x410
-#define LC1(n)		(_LC1 + (n)*0x20)
-
-#define DBGSTATUS	0xd00
-#define DBG_BUSY	(1 << 0)
-
-#define DBGCMD		0xd04
-#define DBGINST0	0xd08
-#define DBGINST1	0xd0c
-
-#define CR0		0xe00
-#define CR1		0xe04
-#define CR2		0xe08
-#define CR3		0xe0c
-#define CR4		0xe10
-#define CRD		0xe14
-
-#define PERIPH_ID	0xfe0
-#define PCELL_ID	0xff0
-
-#define CR0_PERIPH_REQ_SET	(1 << 0)
-#define CR0_BOOT_EN_SET		(1 << 1)
-#define CR0_BOOT_MAN_NS		(1 << 2)
-#define CR0_NUM_CHANS_SHIFT	4
-#define CR0_NUM_CHANS_MASK	0x7
-#define CR0_NUM_PERIPH_SHIFT	12
-#define CR0_NUM_PERIPH_MASK	0x1f
-#define CR0_NUM_EVENTS_SHIFT	17
-#define CR0_NUM_EVENTS_MASK	0x1f
-
-#define CR1_ICACHE_LEN_SHIFT	0
-#define CR1_ICACHE_LEN_MASK	0x7
-#define CR1_NUM_ICACHELINES_SHIFT	4
-#define CR1_NUM_ICACHELINES_MASK	0xf
-
-#define CRD_DATA_WIDTH_SHIFT	0
-#define CRD_DATA_WIDTH_MASK	0x7
-#define CRD_WR_CAP_SHIFT	4
-#define CRD_WR_CAP_MASK		0x7
-#define CRD_WR_Q_DEP_SHIFT	8
-#define CRD_WR_Q_DEP_MASK	0xf
-#define CRD_RD_CAP_SHIFT	12
-#define CRD_RD_CAP_MASK		0x7
-#define CRD_RD_Q_DEP_SHIFT	16
-#define CRD_RD_Q_DEP_MASK	0xf
-#define CRD_DATA_BUFF_SHIFT	20
-#define CRD_DATA_BUFF_MASK	0x3ff
-
-#define	PART		0x330
-#define DESIGNER	0x41
-#define REVISION	0x0
-#define INTEG_CFG	0x0
-#define PERIPH_ID_VAL	((PART << 0) | (DESIGNER << 12))
-
-#define PCELL_ID_VAL	0xb105f00d
-
-#define PL330_STATE_STOPPED		(1 << 0)
-#define PL330_STATE_EXECUTING		(1 << 1)
-#define PL330_STATE_WFE			(1 << 2)
-#define PL330_STATE_FAULTING		(1 << 3)
-#define PL330_STATE_COMPLETING		(1 << 4)
-#define PL330_STATE_WFP			(1 << 5)
-#define PL330_STATE_KILLING		(1 << 6)
-#define PL330_STATE_FAULT_COMPLETING	(1 << 7)
-#define PL330_STATE_CACHEMISS		(1 << 8)
-#define PL330_STATE_UPDTPC		(1 << 9)
-#define PL330_STATE_ATBARRIER		(1 << 10)
-#define PL330_STATE_QUEUEBUSY		(1 << 11)
-#define PL330_STATE_INVALID		(1 << 15)
-
-#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
-				| PL330_STATE_WFE | PL330_STATE_FAULTING)
-
-#define CMD_DMAADDH	0x54
-#define CMD_DMAEND	0x00
-#define CMD_DMAFLUSHP	0x35
-#define CMD_DMAGO	0xa0
-#define CMD_DMALD	0x04
-#define CMD_DMALDP	0x25
-#define CMD_DMALP	0x20
-#define CMD_DMALPEND	0x28
-#define CMD_DMAKILL	0x01
-#define CMD_DMAMOV	0xbc
-#define CMD_DMANOP	0x18
-#define CMD_DMARMB	0x12
-#define CMD_DMASEV	0x34
-#define CMD_DMAST	0x08
-#define CMD_DMASTP	0x29
-#define CMD_DMASTZ	0x0c
-#define CMD_DMAWFE	0x36
-#define CMD_DMAWFP	0x30
-#define CMD_DMAWMB	0x13
-
-#define SZ_DMAADDH	3
-#define SZ_DMAEND	1
-#define SZ_DMAFLUSHP	2
-#define SZ_DMALD	1
-#define SZ_DMALDP	2
-#define SZ_DMALP	2
-#define SZ_DMALPEND	2
-#define SZ_DMAKILL	1
-#define SZ_DMAMOV	6
-#define SZ_DMANOP	1
-#define SZ_DMARMB	1
-#define SZ_DMASEV	2
-#define SZ_DMAST	1
-#define SZ_DMASTP	2
-#define SZ_DMASTZ	1
-#define SZ_DMAWFE	2
-#define SZ_DMAWFP	2
-#define SZ_DMAWMB	1
-#define SZ_DMAGO	6
-
-#define BRST_LEN(ccr)	((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
-#define BRST_SIZE(ccr)	(1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
-
-#define BYTE_TO_BURST(b, ccr)  ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
-#define BURST_TO_BYTE(c, ccr)  ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
-
-/*
- * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
- * at 1byte/burst for P<->M and M<->M respectively.
- * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
- * should be enough for P<->M and M<->M respectively.
- */
-#define MCODE_BUFF_PER_REQ	256
-
-/* If the _pl330_req is available to the client */
-#define IS_FREE(req)	(*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
-
-/* Use this _only_ to wait on transient states */
-#define UNTIL(t, s)	while (!(_state(t) & (s))) cpu_relax();
-
-#ifdef PL330_DEBUG_MCGEN
-static unsigned cmd_line;
-#define PL330_DBGCMD_DUMP(off, x...)	do { \
-						printk("%x:", cmd_line); \
-						printk(x); \
-						cmd_line += off; \
-					} while (0)
-#define PL330_DBGMC_START(addr)		(cmd_line = addr)
-#else
-#define PL330_DBGCMD_DUMP(off, x...)	do {} while (0)
-#define PL330_DBGMC_START(addr)		do {} while (0)
-#endif
-
-struct _xfer_spec {
-	u32 ccr;
-	struct pl330_req *r;
-	struct pl330_xfer *x;
-};
-
-enum dmamov_dst {
-	SAR = 0,
-	CCR,
-	DAR,
-};
-
-enum pl330_dst {
-	SRC = 0,
-	DST,
-};
-
-enum pl330_cond {
-	SINGLE,
-	BURST,
-	ALWAYS,
-};
-
-struct _pl330_req {
-	u32 mc_bus;
-	void *mc_cpu;
-	/* Number of bytes taken to setup MC for the req */
-	u32 mc_len;
-	struct pl330_req *r;
-	/* Hook to attach to DMAC's list of reqs with due callback */
-	struct list_head rqd;
-};
-
-/* ToBeDone for tasklet */
-struct _pl330_tbd {
-	bool reset_dmac;
-	bool reset_mngr;
-	u8 reset_chan;
-};
-
-/* A DMAC Thread */
-struct pl330_thread {
-	u8 id;
-	int ev;
-	/* If the channel is not yet acquired by any client */
-	bool free;
-	/* Parent DMAC */
-	struct pl330_dmac *dmac;
-	/* Only two at a time */
-	struct _pl330_req req[2];
-	/* Index of the last enqueued request */
-	unsigned lstenq;
-	/* Index of the last submitted request or -1 if the DMA is stopped */
-	int req_running;
-};
-
-enum pl330_dmac_state {
-	UNINIT,
-	INIT,
-	DYING,
-};
-
-/* A DMAC */
-struct pl330_dmac {
-	spinlock_t		lock;
-	/* Holds list of reqs with due callbacks */
-	struct list_head	req_done;
-	/* Pointer to platform specific stuff */
-	struct pl330_info	*pinfo;
-	/* Maximum possible events/irqs */
-	int			events[32];
-	/* BUS address of MicroCode buffer */
-	u32			mcode_bus;
-	/* CPU address of MicroCode buffer */
-	void			*mcode_cpu;
-	/* List of all Channel threads */
-	struct pl330_thread	*channels;
-	/* Pointer to the MANAGER thread */
-	struct pl330_thread	*manager;
-	/* To handle bad news in interrupt */
-	struct tasklet_struct	tasks;
-	struct _pl330_tbd	dmac_tbd;
-	/* State of DMAC operation */
-	enum pl330_dmac_state	state;
-};
-
-static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
-{
-	if (r && r->xfer_cb)
-		r->xfer_cb(r->token, err);
-}
-
-static inline bool _queue_empty(struct pl330_thread *thrd)
-{
-	return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
-		? true : false;
-}
-
-static inline bool _queue_full(struct pl330_thread *thrd)
-{
-	return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
-		? false : true;
-}
-
-static inline bool is_manager(struct pl330_thread *thrd)
-{
-	struct pl330_dmac *pl330 = thrd->dmac;
-
-	/* MANAGER is indexed at the end */
-	if (thrd->id == pl330->pinfo->pcfg.num_chan)
-		return true;
-	else
-		return false;
-}
-
-/* If manager of the thread is in Non-Secure mode */
-static inline bool _manager_ns(struct pl330_thread *thrd)
-{
-	struct pl330_dmac *pl330 = thrd->dmac;
-
-	return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
-}
-
-static inline u32 get_id(struct pl330_info *pi, u32 off)
-{
-	void __iomem *regs = pi->base;
-	u32 id = 0;
-
-	id |= (readb(regs + off + 0x0) << 0);
-	id |= (readb(regs + off + 0x4) << 8);
-	id |= (readb(regs + off + 0x8) << 16);
-	id |= (readb(regs + off + 0xc) << 24);
-
-	return id;
-}
-
-static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
-		enum pl330_dst da, u16 val)
-{
-	if (dry_run)
-		return SZ_DMAADDH;
-
-	buf[0] = CMD_DMAADDH;
-	buf[0] |= (da << 1);
-	*((u16 *)&buf[1]) = val;
-
-	PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
-		da == 1 ? "DA" : "SA", val);
-
-	return SZ_DMAADDH;
-}
-
-static inline u32 _emit_END(unsigned dry_run, u8 buf[])
-{
-	if (dry_run)
-		return SZ_DMAEND;
-
-	buf[0] = CMD_DMAEND;
-
-	PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
-
-	return SZ_DMAEND;
-}
-
-static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
-{
-	if (dry_run)
-		return SZ_DMAFLUSHP;
-
-	buf[0] = CMD_DMAFLUSHP;
-
-	peri &= 0x1f;
-	peri <<= 3;
-	buf[1] = peri;
-
-	PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
-
-	return SZ_DMAFLUSHP;
-}
-
-static inline u32 _emit_LD(unsigned dry_run, u8 buf[],	enum pl330_cond cond)
-{
-	if (dry_run)
-		return SZ_DMALD;
-
-	buf[0] = CMD_DMALD;
-
-	if (cond == SINGLE)
-		buf[0] |= (0 << 1) | (1 << 0);
-	else if (cond == BURST)
-		buf[0] |= (1 << 1) | (1 << 0);
-
-	PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
-		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
-
-	return SZ_DMALD;
-}
-
-static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
-		enum pl330_cond cond, u8 peri)
-{
-	if (dry_run)
-		return SZ_DMALDP;
-
-	buf[0] = CMD_DMALDP;
-
-	if (cond == BURST)
-		buf[0] |= (1 << 1);
-
-	peri &= 0x1f;
-	peri <<= 3;
-	buf[1] = peri;
-
-	PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
-		cond == SINGLE ? 'S' : 'B', peri >> 3);
-
-	return SZ_DMALDP;
-}
-
-static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
-		unsigned loop, u8 cnt)
-{
-	if (dry_run)
-		return SZ_DMALP;
-
-	buf[0] = CMD_DMALP;
-
-	if (loop)
-		buf[0] |= (1 << 1);
-
-	cnt--; /* DMAC increments by 1 internally */
-	buf[1] = cnt;
-
-	PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
-
-	return SZ_DMALP;
-}
-
-struct _arg_LPEND {
-	enum pl330_cond cond;
-	bool forever;
-	unsigned loop;
-	u8 bjump;
-};
-
-static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
-		const struct _arg_LPEND *arg)
-{
-	enum pl330_cond cond = arg->cond;
-	bool forever = arg->forever;
-	unsigned loop = arg->loop;
-	u8 bjump = arg->bjump;
-
-	if (dry_run)
-		return SZ_DMALPEND;
-
-	buf[0] = CMD_DMALPEND;
-
-	if (loop)
-		buf[0] |= (1 << 2);
-
-	if (!forever)
-		buf[0] |= (1 << 4);
-
-	if (cond == SINGLE)
-		buf[0] |= (0 << 1) | (1 << 0);
-	else if (cond == BURST)
-		buf[0] |= (1 << 1) | (1 << 0);
-
-	buf[1] = bjump;
-
-	PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
-			forever ? "FE" : "END",
-			cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
-			loop ? '1' : '0',
-			bjump);
-
-	return SZ_DMALPEND;
-}
-
-static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
-{
-	if (dry_run)
-		return SZ_DMAKILL;
-
-	buf[0] = CMD_DMAKILL;
-
-	return SZ_DMAKILL;
-}
-
-static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
-		enum dmamov_dst dst, u32 val)
-{
-	if (dry_run)
-		return SZ_DMAMOV;
-
-	buf[0] = CMD_DMAMOV;
-	buf[1] = dst;
-	*((u32 *)&buf[2]) = val;
-
-	PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
-		dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
-
-	return SZ_DMAMOV;
-}
-
-static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
-{
-	if (dry_run)
-		return SZ_DMANOP;
-
-	buf[0] = CMD_DMANOP;
-
-	PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
-
-	return SZ_DMANOP;
-}
-
-static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
-{
-	if (dry_run)
-		return SZ_DMARMB;
-
-	buf[0] = CMD_DMARMB;
-
-	PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
-
-	return SZ_DMARMB;
-}
-
-static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
-{
-	if (dry_run)
-		return SZ_DMASEV;
-
-	buf[0] = CMD_DMASEV;
-
-	ev &= 0x1f;
-	ev <<= 3;
-	buf[1] = ev;
-
-	PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
-
-	return SZ_DMASEV;
-}
-
-static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
-{
-	if (dry_run)
-		return SZ_DMAST;
-
-	buf[0] = CMD_DMAST;
-
-	if (cond == SINGLE)
-		buf[0] |= (0 << 1) | (1 << 0);
-	else if (cond == BURST)
-		buf[0] |= (1 << 1) | (1 << 0);
-
-	PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
-		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
-
-	return SZ_DMAST;
-}
-
-static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
-		enum pl330_cond cond, u8 peri)
-{
-	if (dry_run)
-		return SZ_DMASTP;
-
-	buf[0] = CMD_DMASTP;
-
-	if (cond == BURST)
-		buf[0] |= (1 << 1);
-
-	peri &= 0x1f;
-	peri <<= 3;
-	buf[1] = peri;
-
-	PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
-		cond == SINGLE ? 'S' : 'B', peri >> 3);
-
-	return SZ_DMASTP;
-}
-
-static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
-{
-	if (dry_run)
-		return SZ_DMASTZ;
-
-	buf[0] = CMD_DMASTZ;
-
-	PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
-
-	return SZ_DMASTZ;
-}
-
-static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
-		unsigned invalidate)
-{
-	if (dry_run)
-		return SZ_DMAWFE;
-
-	buf[0] = CMD_DMAWFE;
-
-	ev &= 0x1f;
-	ev <<= 3;
-	buf[1] = ev;
-
-	if (invalidate)
-		buf[1] |= (1 << 1);
-
-	PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
-		ev >> 3, invalidate ? ", I" : "");
-
-	return SZ_DMAWFE;
-}
-
-static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
-		enum pl330_cond cond, u8 peri)
-{
-	if (dry_run)
-		return SZ_DMAWFP;
-
-	buf[0] = CMD_DMAWFP;
-
-	if (cond == SINGLE)
-		buf[0] |= (0 << 1) | (0 << 0);
-	else if (cond == BURST)
-		buf[0] |= (1 << 1) | (0 << 0);
-	else
-		buf[0] |= (0 << 1) | (1 << 0);
-
-	peri &= 0x1f;
-	peri <<= 3;
-	buf[1] = peri;
-
-	PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
-		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
-
-	return SZ_DMAWFP;
-}
-
-static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
-{
-	if (dry_run)
-		return SZ_DMAWMB;
-
-	buf[0] = CMD_DMAWMB;
-
-	PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
-
-	return SZ_DMAWMB;
-}
-
-struct _arg_GO {
-	u8 chan;
-	u32 addr;
-	unsigned ns;
-};
-
-static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
-		const struct _arg_GO *arg)
-{
-	u8 chan = arg->chan;
-	u32 addr = arg->addr;
-	unsigned ns = arg->ns;
-
-	if (dry_run)
-		return SZ_DMAGO;
-
-	buf[0] = CMD_DMAGO;
-	buf[0] |= (ns << 1);
-
-	buf[1] = chan & 0x7;
-
-	*((u32 *)&buf[2]) = addr;
-
-	return SZ_DMAGO;
-}
-
-#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-
-/* Returns Time-Out */
-static bool _until_dmac_idle(struct pl330_thread *thrd)
-{
-	void __iomem *regs = thrd->dmac->pinfo->base;
-	unsigned long loops = msecs_to_loops(5);
-
-	do {
-		/* Until Manager is Idle */
-		if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
-			break;
-
-		cpu_relax();
-	} while (--loops);
-
-	if (!loops)
-		return true;
-
-	return false;
-}
-
-static inline void _execute_DBGINSN(struct pl330_thread *thrd,
-		u8 insn[], bool as_manager)
-{
-	void __iomem *regs = thrd->dmac->pinfo->base;
-	u32 val;
-
-	val = (insn[0] << 16) | (insn[1] << 24);
-	if (!as_manager) {
-		val |= (1 << 0);
-		val |= (thrd->id << 8); /* Channel Number */
-	}
-	writel(val, regs + DBGINST0);
-
-	val = *((u32 *)&insn[2]);
-	writel(val, regs + DBGINST1);
-
-	/* If timed out due to halted state-machine */
-	if (_until_dmac_idle(thrd)) {
-		dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
-		return;
-	}
-
-	/* Get going */
-	writel(0, regs + DBGCMD);
-}
-
-/*
- * Mark a _pl330_req as free.
- * We do it by writing DMAEND as the first instruction
- * because no valid request is going to have DMAEND as
- * its first instruction to execute.
- */
-static void mark_free(struct pl330_thread *thrd, int idx)
-{
-	struct _pl330_req *req = &thrd->req[idx];
-
-	_emit_END(0, req->mc_cpu);
-	req->mc_len = 0;
-
-	thrd->req_running = -1;
-}
-
-static inline u32 _state(struct pl330_thread *thrd)
-{
-	void __iomem *regs = thrd->dmac->pinfo->base;
-	u32 val;
-
-	if (is_manager(thrd))
-		val = readl(regs + DS) & 0xf;
-	else
-		val = readl(regs + CS(thrd->id)) & 0xf;
-
-	switch (val) {
-	case DS_ST_STOP:
-		return PL330_STATE_STOPPED;
-	case DS_ST_EXEC:
-		return PL330_STATE_EXECUTING;
-	case DS_ST_CMISS:
-		return PL330_STATE_CACHEMISS;
-	case DS_ST_UPDTPC:
-		return PL330_STATE_UPDTPC;
-	case DS_ST_WFE:
-		return PL330_STATE_WFE;
-	case DS_ST_FAULT:
-		return PL330_STATE_FAULTING;
-	case DS_ST_ATBRR:
-		if (is_manager(thrd))
-			return PL330_STATE_INVALID;
-		else
-			return PL330_STATE_ATBARRIER;
-	case DS_ST_QBUSY:
-		if (is_manager(thrd))
-			return PL330_STATE_INVALID;
-		else
-			return PL330_STATE_QUEUEBUSY;
-	case DS_ST_WFP:
-		if (is_manager(thrd))
-			return PL330_STATE_INVALID;
-		else
-			return PL330_STATE_WFP;
-	case DS_ST_KILL:
-		if (is_manager(thrd))
-			return PL330_STATE_INVALID;
-		else
-			return PL330_STATE_KILLING;
-	case DS_ST_CMPLT:
-		if (is_manager(thrd))
-			return PL330_STATE_INVALID;
-		else
-			return PL330_STATE_COMPLETING;
-	case DS_ST_FLTCMP:
-		if (is_manager(thrd))
-			return PL330_STATE_INVALID;
-		else
-			return PL330_STATE_FAULT_COMPLETING;
-	default:
-		return PL330_STATE_INVALID;
-	}
-}
-
-static void _stop(struct pl330_thread *thrd)
-{
-	void __iomem *regs = thrd->dmac->pinfo->base;
-	u8 insn[6] = {0, 0, 0, 0, 0, 0};
-
-	if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
-		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
-
-	/* Return if nothing needs to be done */
-	if (_state(thrd) == PL330_STATE_COMPLETING
-		  || _state(thrd) == PL330_STATE_KILLING
-		  || _state(thrd) == PL330_STATE_STOPPED)
-		return;
-
-	_emit_KILL(0, insn);
-
-	/* Stop generating interrupts for SEV */
-	writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
-
-	_execute_DBGINSN(thrd, insn, is_manager(thrd));
-}
-
-/* Start doing req 'idx' of thread 'thrd' */
-static bool _trigger(struct pl330_thread *thrd)
-{
-	void __iomem *regs = thrd->dmac->pinfo->base;
-	struct _pl330_req *req;
-	struct pl330_req *r;
-	struct _arg_GO go;
-	unsigned ns;
-	u8 insn[6] = {0, 0, 0, 0, 0, 0};
-	int idx;
-
-	/* Return if already ACTIVE */
-	if (_state(thrd) != PL330_STATE_STOPPED)
-		return true;
-
-	idx = 1 - thrd->lstenq;
-	if (!IS_FREE(&thrd->req[idx]))
-		req = &thrd->req[idx];
-	else {
-		idx = thrd->lstenq;
-		if (!IS_FREE(&thrd->req[idx]))
-			req = &thrd->req[idx];
-		else
-			req = NULL;
-	}
-
-	/* Return if no request */
-	if (!req || !req->r)
-		return true;
-
-	r = req->r;
-
-	if (r->cfg)
-		ns = r->cfg->nonsecure ? 1 : 0;
-	else if (readl(regs + CS(thrd->id)) & CS_CNS)
-		ns = 1;
-	else
-		ns = 0;
-
-	/* See 'Abort Sources' point-4 at Page 2-25 */
-	if (_manager_ns(thrd) && !ns)
-		dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
-			__func__, __LINE__);
-
-	go.chan = thrd->id;
-	go.addr = req->mc_bus;
-	go.ns = ns;
-	_emit_GO(0, insn, &go);
-
-	/* Set to generate interrupts for SEV */
-	writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
-
-	/* Only manager can execute GO */
-	_execute_DBGINSN(thrd, insn, true);
-
-	thrd->req_running = idx;
-
-	return true;
-}
-
-static bool _start(struct pl330_thread *thrd)
-{
-	switch (_state(thrd)) {
-	case PL330_STATE_FAULT_COMPLETING:
-		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
-
-		if (_state(thrd) == PL330_STATE_KILLING)
-			UNTIL(thrd, PL330_STATE_STOPPED)
-
-	case PL330_STATE_FAULTING:
-		_stop(thrd);
-
-	case PL330_STATE_KILLING:
-	case PL330_STATE_COMPLETING:
-		UNTIL(thrd, PL330_STATE_STOPPED)
-
-	case PL330_STATE_STOPPED:
-		return _trigger(thrd);
-
-	case PL330_STATE_WFP:
-	case PL330_STATE_QUEUEBUSY:
-	case PL330_STATE_ATBARRIER:
-	case PL330_STATE_UPDTPC:
-	case PL330_STATE_CACHEMISS:
-	case PL330_STATE_EXECUTING:
-		return true;
-
-	case PL330_STATE_WFE: /* For RESUME, nothing yet */
-	default:
-		return false;
-	}
-}
-
-static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
-		const struct _xfer_spec *pxs, int cyc)
-{
-	int off = 0;
-
-	while (cyc--) {
-		off += _emit_LD(dry_run, &buf[off], ALWAYS);
-		off += _emit_RMB(dry_run, &buf[off]);
-		off += _emit_ST(dry_run, &buf[off], ALWAYS);
-		off += _emit_WMB(dry_run, &buf[off]);
-	}
-
-	return off;
-}
-
-static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
-		const struct _xfer_spec *pxs, int cyc)
-{
-	int off = 0;
-
-	while (cyc--) {
-		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
-		off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
-		off += _emit_ST(dry_run, &buf[off], ALWAYS);
-		off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
-	}
-
-	return off;
-}
-
-static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
-		const struct _xfer_spec *pxs, int cyc)
-{
-	int off = 0;
-
-	while (cyc--) {
-		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
-		off += _emit_LD(dry_run, &buf[off], ALWAYS);
-		off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
-		off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
-	}
-
-	return off;
-}
-
-static int _bursts(unsigned dry_run, u8 buf[],
-		const struct _xfer_spec *pxs, int cyc)
-{
-	int off = 0;
-
-	switch (pxs->r->rqtype) {
-	case MEMTODEV:
-		off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
-		break;
-	case DEVTOMEM:
-		off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
-		break;
-	case MEMTOMEM:
-		off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
-		break;
-	default:
-		off += 0x40000000; /* Scare off the Client */
-		break;
-	}
-
-	return off;
-}
-
-/* Returns bytes consumed and updates bursts */
-static inline int _loop(unsigned dry_run, u8 buf[],
-		unsigned long *bursts, const struct _xfer_spec *pxs)
-{
-	int cyc, cycmax, szlp, szlpend, szbrst, off;
-	unsigned lcnt0, lcnt1, ljmp0, ljmp1;
-	struct _arg_LPEND lpend;
-
-	/* Max iterations possible in DMALP is 256 */
-	if (*bursts >= 256*256) {
-		lcnt1 = 256;
-		lcnt0 = 256;
-		cyc = *bursts / lcnt1 / lcnt0;
-	} else if (*bursts > 256) {
-		lcnt1 = 256;
-		lcnt0 = *bursts / lcnt1;
-		cyc = 1;
-	} else {
-		lcnt1 = *bursts;
-		lcnt0 = 0;
-		cyc = 1;
-	}
-
-	szlp = _emit_LP(1, buf, 0, 0);
-	szbrst = _bursts(1, buf, pxs, 1);
-
-	lpend.cond = ALWAYS;
-	lpend.forever = false;
-	lpend.loop = 0;
-	lpend.bjump = 0;
-	szlpend = _emit_LPEND(1, buf, &lpend);
-
-	if (lcnt0) {
-		szlp *= 2;
-		szlpend *= 2;
-	}
-
-	/*
-	 * Max bursts that we can unroll due to limit on the
-	 * size of backward jump that can be encoded in DMALPEND
-	 * which is 8-bits and hence 255
-	 */
-	cycmax = (255 - (szlp + szlpend)) / szbrst;
-
-	cyc = (cycmax < cyc) ? cycmax : cyc;
-
-	off = 0;
-
-	if (lcnt0) {
-		off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
-		ljmp0 = off;
-	}
-
-	off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
-	ljmp1 = off;
-
-	off += _bursts(dry_run, &buf[off], pxs, cyc);
-
-	lpend.cond = ALWAYS;
-	lpend.forever = false;
-	lpend.loop = 1;
-	lpend.bjump = off - ljmp1;
-	off += _emit_LPEND(dry_run, &buf[off], &lpend);
-
-	if (lcnt0) {
-		lpend.cond = ALWAYS;
-		lpend.forever = false;
-		lpend.loop = 0;
-		lpend.bjump = off - ljmp0;
-		off += _emit_LPEND(dry_run, &buf[off], &lpend);
-	}
-
-	*bursts = lcnt1 * cyc;
-	if (lcnt0)
-		*bursts *= lcnt0;
-
-	return off;
-}
-
-static inline int _setup_loops(unsigned dry_run, u8 buf[],
-		const struct _xfer_spec *pxs)
-{
-	struct pl330_xfer *x = pxs->x;
-	u32 ccr = pxs->ccr;
-	unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
-	int off = 0;
-
-	while (bursts) {
-		c = bursts;
-		off += _loop(dry_run, &buf[off], &c, pxs);
-		bursts -= c;
-	}
-
-	return off;
-}
-
-static inline int _setup_xfer(unsigned dry_run, u8 buf[],
-		const struct _xfer_spec *pxs)
-{
-	struct pl330_xfer *x = pxs->x;
-	int off = 0;
-
-	/* DMAMOV SAR, x->src_addr */
-	off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
-	/* DMAMOV DAR, x->dst_addr */
-	off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
-
-	/* Setup Loop(s) */
-	off += _setup_loops(dry_run, &buf[off], pxs);
-
-	return off;
-}
-
-/*
- * A req is a sequence of one or more xfer units.
- * Returns the number of bytes taken to setup the MC for the req.
- */
-static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
-		unsigned index, struct _xfer_spec *pxs)
-{
-	struct _pl330_req *req = &thrd->req[index];
-	struct pl330_xfer *x;
-	u8 *buf = req->mc_cpu;
-	int off = 0;
-
-	PL330_DBGMC_START(req->mc_bus);
-
-	/* DMAMOV CCR, ccr */
-	off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
-
-	x = pxs->r->x;
-	do {
-		/* Error if xfer length is not aligned at burst size */
-		if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
-			return -EINVAL;
-
-		pxs->x = x;
-		off += _setup_xfer(dry_run, &buf[off], pxs);
-
-		x = x->next;
-	} while (x);
-
-	/* DMASEV peripheral/event */
-	off += _emit_SEV(dry_run, &buf[off], thrd->ev);
-	/* DMAEND */
-	off += _emit_END(dry_run, &buf[off]);
-
-	return off;
-}
-
-static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
-{
-	u32 ccr = 0;
-
-	if (rqc->src_inc)
-		ccr |= CC_SRCINC;
-
-	if (rqc->dst_inc)
-		ccr |= CC_DSTINC;
-
-	/* We set same protection levels for Src and DST for now */
-	if (rqc->privileged)
-		ccr |= CC_SRCPRI | CC_DSTPRI;
-	if (rqc->nonsecure)
-		ccr |= CC_SRCNS | CC_DSTNS;
-	if (rqc->insnaccess)
-		ccr |= CC_SRCIA | CC_DSTIA;
-
-	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
-	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
-
-	ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
-	ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
-
-	ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
-	ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
-
-	ccr |= (rqc->swap << CC_SWAP_SHFT);
-
-	return ccr;
-}
-
-static inline bool _is_valid(u32 ccr)
-{
-	enum pl330_dstcachectrl dcctl;
-	enum pl330_srccachectrl scctl;
-
-	dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
-	scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
-
-	if (dcctl == DINVALID1 || dcctl == DINVALID2
-			|| scctl == SINVALID1 || scctl == SINVALID2)
-		return false;
-	else
-		return true;
-}
-
-/*
- * Submit a list of xfers after which the client wants notification.
- * Client is not notified after each xfer unit, just once after all
- * xfer units are done or some error occurs.
- */
-int pl330_submit_req(void *ch_id, struct pl330_req *r)
-{
-	struct pl330_thread *thrd = ch_id;
-	struct pl330_dmac *pl330;
-	struct pl330_info *pi;
-	struct _xfer_spec xs;
-	unsigned long flags;
-	void __iomem *regs;
-	unsigned idx;
-	u32 ccr;
-	int ret = 0;
-
-	/* No Req or Unacquired Channel or DMAC */
-	if (!r || !thrd || thrd->free)
-		return -EINVAL;
-
-	pl330 = thrd->dmac;
-	pi = pl330->pinfo;
-	regs = pi->base;
-
-	if (pl330->state == DYING
-		|| pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
-		dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
-			__func__, __LINE__);
-		return -EAGAIN;
-	}
-
-	/* If request for non-existing peripheral */
-	if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
-		dev_info(thrd->dmac->pinfo->dev,
-				"%s:%d Invalid peripheral(%u)!\n",
-				__func__, __LINE__, r->peri);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&pl330->lock, flags);
-
-	if (_queue_full(thrd)) {
-		ret = -EAGAIN;
-		goto xfer_exit;
-	}
-
-	/* Prefer Secure Channel */
-	if (!_manager_ns(thrd))
-		r->cfg->nonsecure = 0;
-	else
-		r->cfg->nonsecure = 1;
-
-	/* Use last settings, if not provided */
-	if (r->cfg)
-		ccr = _prepare_ccr(r->cfg);
-	else
-		ccr = readl(regs + CC(thrd->id));
-
-	/* If this req doesn't have valid xfer settings */
-	if (!_is_valid(ccr)) {
-		ret = -EINVAL;
-		dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
-			__func__, __LINE__, ccr);
-		goto xfer_exit;
-	}
-
-	idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
-
-	xs.ccr = ccr;
-	xs.r = r;
-
-	/* First dry run to check if req is acceptable */
-	ret = _setup_req(1, thrd, idx, &xs);
-	if (ret < 0)
-		goto xfer_exit;
-
-	if (ret > pi->mcbufsz / 2) {
-		dev_info(thrd->dmac->pinfo->dev,
-			"%s:%d Trying increasing mcbufsz\n",
-				__func__, __LINE__);
-		ret = -ENOMEM;
-		goto xfer_exit;
-	}
-
-	/* Hook the request */
-	thrd->lstenq = idx;
-	thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
-	thrd->req[idx].r = r;
-
-	ret = 0;
-
-xfer_exit:
-	spin_unlock_irqrestore(&pl330->lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(pl330_submit_req);
-
-static void pl330_dotask(unsigned long data)
-{
-	struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
-	struct pl330_info *pi = pl330->pinfo;
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&pl330->lock, flags);
-
-	/* The DMAC itself gone nuts */
-	if (pl330->dmac_tbd.reset_dmac) {
-		pl330->state = DYING;
-		/* Reset the manager too */
-		pl330->dmac_tbd.reset_mngr = true;
-		/* Clear the reset flag */
-		pl330->dmac_tbd.reset_dmac = false;
-	}
-
-	if (pl330->dmac_tbd.reset_mngr) {
-		_stop(pl330->manager);
-		/* Reset all channels */
-		pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
-		/* Clear the reset flag */
-		pl330->dmac_tbd.reset_mngr = false;
-	}
-
-	for (i = 0; i < pi->pcfg.num_chan; i++) {
-
-		if (pl330->dmac_tbd.reset_chan & (1 << i)) {
-			struct pl330_thread *thrd = &pl330->channels[i];
-			void __iomem *regs = pi->base;
-			enum pl330_op_err err;
-
-			_stop(thrd);
-
-			if (readl(regs + FSC) & (1 << thrd->id))
-				err = PL330_ERR_FAIL;
-			else
-				err = PL330_ERR_ABORT;
-
-			spin_unlock_irqrestore(&pl330->lock, flags);
-
-			_callback(thrd->req[1 - thrd->lstenq].r, err);
-			_callback(thrd->req[thrd->lstenq].r, err);
-
-			spin_lock_irqsave(&pl330->lock, flags);
-
-			thrd->req[0].r = NULL;
-			thrd->req[1].r = NULL;
-			mark_free(thrd, 0);
-			mark_free(thrd, 1);
-
-			/* Clear the reset flag */
-			pl330->dmac_tbd.reset_chan &= ~(1 << i);
-		}
-	}
-
-	spin_unlock_irqrestore(&pl330->lock, flags);
-
-	return;
-}
-
-/* Returns 1 if state was updated, 0 otherwise */
-int pl330_update(const struct pl330_info *pi)
-{
-	struct _pl330_req *rqdone;
-	struct pl330_dmac *pl330;
-	unsigned long flags;
-	void __iomem *regs;
-	u32 val;
-	int id, ev, ret = 0;
-
-	if (!pi || !pi->pl330_data)
-		return 0;
-
-	regs = pi->base;
-	pl330 = pi->pl330_data;
-
-	spin_lock_irqsave(&pl330->lock, flags);
-
-	val = readl(regs + FSM) & 0x1;
-	if (val)
-		pl330->dmac_tbd.reset_mngr = true;
-	else
-		pl330->dmac_tbd.reset_mngr = false;
-
-	val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
-	pl330->dmac_tbd.reset_chan |= val;
-	if (val) {
-		int i = 0;
-		while (i < pi->pcfg.num_chan) {
-			if (val & (1 << i)) {
-				dev_info(pi->dev,
-					"Reset Channel-%d\t CS-%x FTC-%x\n",
-						i, readl(regs + CS(i)),
-						readl(regs + FTC(i)));
-				_stop(&pl330->channels[i]);
-			}
-			i++;
-		}
-	}
-
-	/* Check which event happened i.e, thread notified */
-	val = readl(regs + ES);
-	if (pi->pcfg.num_events < 32
-			&& val & ~((1 << pi->pcfg.num_events) - 1)) {
-		pl330->dmac_tbd.reset_dmac = true;
-		dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
-		ret = 1;
-		goto updt_exit;
-	}
-
-	for (ev = 0; ev < pi->pcfg.num_events; ev++) {
-		if (val & (1 << ev)) { /* Event occurred */
-			struct pl330_thread *thrd;
-			u32 inten = readl(regs + INTEN);
-			int active;
-
-			/* Clear the event */
-			if (inten & (1 << ev))
-				writel(1 << ev, regs + INTCLR);
-
-			ret = 1;
-
-			id = pl330->events[ev];
-
-			thrd = &pl330->channels[id];
-
-			active = thrd->req_running;
-			if (active == -1) /* Aborted */
-				continue;
-
-			rqdone = &thrd->req[active];
-			mark_free(thrd, active);
-
-			/* Get going again ASAP */
-			_start(thrd);
-
-			/* For now, just make a list of callbacks to be done */
-			list_add_tail(&rqdone->rqd, &pl330->req_done);
-		}
-	}
-
-	/* Now that we are in no hurry, do the callbacks */
-	while (!list_empty(&pl330->req_done)) {
-		struct pl330_req *r;
-
-		rqdone = container_of(pl330->req_done.next,
-					struct _pl330_req, rqd);
-
-		list_del_init(&rqdone->rqd);
-
-		/* Detach the req */
-		r = rqdone->r;
-		rqdone->r = NULL;
-
-		spin_unlock_irqrestore(&pl330->lock, flags);
-		_callback(r, PL330_ERR_NONE);
-		spin_lock_irqsave(&pl330->lock, flags);
-	}
-
-updt_exit:
-	spin_unlock_irqrestore(&pl330->lock, flags);
-
-	if (pl330->dmac_tbd.reset_dmac
-			|| pl330->dmac_tbd.reset_mngr
-			|| pl330->dmac_tbd.reset_chan) {
-		ret = 1;
-		tasklet_schedule(&pl330->tasks);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(pl330_update);
-
-int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
-{
-	struct pl330_thread *thrd = ch_id;
-	struct pl330_dmac *pl330;
-	unsigned long flags;
-	int ret = 0, active;
-
-	if (!thrd || thrd->free || thrd->dmac->state == DYING)
-		return -EINVAL;
-
-	pl330 = thrd->dmac;
-	active = thrd->req_running;
-
-	spin_lock_irqsave(&pl330->lock, flags);
-
-	switch (op) {
-	case PL330_OP_FLUSH:
-		/* Make sure the channel is stopped */
-		_stop(thrd);
-
-		thrd->req[0].r = NULL;
-		thrd->req[1].r = NULL;
-		mark_free(thrd, 0);
-		mark_free(thrd, 1);
-		break;
-
-	case PL330_OP_ABORT:
-		/* Make sure the channel is stopped */
-		_stop(thrd);
-
-		/* ABORT is only for the active req */
-		if (active == -1)
-			break;
-
-		thrd->req[active].r = NULL;
-		mark_free(thrd, active);
-
-		/* Start the next */
-	case PL330_OP_START:
-		if ((active == -1) && !_start(thrd))
-			ret = -EIO;
-		break;
-
-	default:
-		ret = -EINVAL;
-	}
-
-	spin_unlock_irqrestore(&pl330->lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(pl330_chan_ctrl);
-
-int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus)
-{
-	struct pl330_thread *thrd = ch_id;
-	struct pl330_dmac *pl330;
-	struct pl330_info *pi;
-	void __iomem *regs;
-	int active;
-	u32 val;
-
-	if (!pstatus || !thrd || thrd->free)
-		return -EINVAL;
-
-	pl330 = thrd->dmac;
-	pi = pl330->pinfo;
-	regs = pi->base;
-
-	/* The client should remove the DMAC and add again */
-	if (pl330->state == DYING)
-		pstatus->dmac_halted = true;
-	else
-		pstatus->dmac_halted = false;
-
-	val = readl(regs + FSC);
-	if (val & (1 << thrd->id))
-		pstatus->faulting = true;
-	else
-		pstatus->faulting = false;
-
-	active = thrd->req_running;
-
-	if (active == -1) {
-		/* Indicate that the thread is not running */
-		pstatus->top_req = NULL;
-		pstatus->wait_req = NULL;
-	} else {
-		pstatus->top_req = thrd->req[active].r;
-		pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
-					? thrd->req[1 - active].r : NULL;
-	}
-
-	pstatus->src_addr = readl(regs + SA(thrd->id));
-	pstatus->dst_addr = readl(regs + DA(thrd->id));
-
-	return 0;
-}
-EXPORT_SYMBOL(pl330_chan_status);
-
-/* Reserve an event */
-static inline int _alloc_event(struct pl330_thread *thrd)
-{
-	struct pl330_dmac *pl330 = thrd->dmac;
-	struct pl330_info *pi = pl330->pinfo;
-	int ev;
-
-	for (ev = 0; ev < pi->pcfg.num_events; ev++)
-		if (pl330->events[ev] == -1) {
-			pl330->events[ev] = thrd->id;
-			return ev;
-		}
-
-	return -1;
-}
-
-static bool _chan_ns(const struct pl330_info *pi, int i)
-{
-	return pi->pcfg.irq_ns & (1 << i);
-}
-
-/* Upon success, returns IdentityToken for the
- * allocated channel, NULL otherwise.
- */
-void *pl330_request_channel(const struct pl330_info *pi)
-{
-	struct pl330_thread *thrd = NULL;
-	struct pl330_dmac *pl330;
-	unsigned long flags;
-	int chans, i;
-
-	if (!pi || !pi->pl330_data)
-		return NULL;
-
-	pl330 = pi->pl330_data;
-
-	if (pl330->state == DYING)
-		return NULL;
-
-	chans = pi->pcfg.num_chan;
-
-	spin_lock_irqsave(&pl330->lock, flags);
-
-	for (i = 0; i < chans; i++) {
-		thrd = &pl330->channels[i];
-		if ((thrd->free) && (!_manager_ns(thrd) ||
-					_chan_ns(pi, i))) {
-			thrd->ev = _alloc_event(thrd);
-			if (thrd->ev >= 0) {
-				thrd->free = false;
-				thrd->lstenq = 1;
-				thrd->req[0].r = NULL;
-				mark_free(thrd, 0);
-				thrd->req[1].r = NULL;
-				mark_free(thrd, 1);
-				break;
-			}
-		}
-		thrd = NULL;
-	}
-
-	spin_unlock_irqrestore(&pl330->lock, flags);
-
-	return thrd;
-}
-EXPORT_SYMBOL(pl330_request_channel);
-
-/* Release an event */
-static inline void _free_event(struct pl330_thread *thrd, int ev)
-{
-	struct pl330_dmac *pl330 = thrd->dmac;
-	struct pl330_info *pi = pl330->pinfo;
-
-	/* If the event is valid and was held by the thread */
-	if (ev >= 0 && ev < pi->pcfg.num_events
-			&& pl330->events[ev] == thrd->id)
-		pl330->events[ev] = -1;
-}
-
-void pl330_release_channel(void *ch_id)
-{
-	struct pl330_thread *thrd = ch_id;
-	struct pl330_dmac *pl330;
-	unsigned long flags;
-
-	if (!thrd || thrd->free)
-		return;
-
-	_stop(thrd);
-
-	_callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
-	_callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
-
-	pl330 = thrd->dmac;
-
-	spin_lock_irqsave(&pl330->lock, flags);
-	_free_event(thrd, thrd->ev);
-	thrd->free = true;
-	spin_unlock_irqrestore(&pl330->lock, flags);
-}
-EXPORT_SYMBOL(pl330_release_channel);
-
-/* Initialize the structure for PL330 configuration, that can be used
- * by the client driver the make best use of the DMAC
- */
-static void read_dmac_config(struct pl330_info *pi)
-{
-	void __iomem *regs = pi->base;
-	u32 val;
-
-	val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
-	val &= CRD_DATA_WIDTH_MASK;
-	pi->pcfg.data_bus_width = 8 * (1 << val);
-
-	val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
-	val &= CRD_DATA_BUFF_MASK;
-	pi->pcfg.data_buf_dep = val + 1;
-
-	val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
-	val &= CR0_NUM_CHANS_MASK;
-	val += 1;
-	pi->pcfg.num_chan = val;
-
-	val = readl(regs + CR0);
-	if (val & CR0_PERIPH_REQ_SET) {
-		val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
-		val += 1;
-		pi->pcfg.num_peri = val;
-		pi->pcfg.peri_ns = readl(regs + CR4);
-	} else {
-		pi->pcfg.num_peri = 0;
-	}
-
-	val = readl(regs + CR0);
-	if (val & CR0_BOOT_MAN_NS)
-		pi->pcfg.mode |= DMAC_MODE_NS;
-	else
-		pi->pcfg.mode &= ~DMAC_MODE_NS;
-
-	val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
-	val &= CR0_NUM_EVENTS_MASK;
-	val += 1;
-	pi->pcfg.num_events = val;
-
-	pi->pcfg.irq_ns = readl(regs + CR3);
-
-	pi->pcfg.periph_id = get_id(pi, PERIPH_ID);
-	pi->pcfg.pcell_id = get_id(pi, PCELL_ID);
-}
-
-static inline void _reset_thread(struct pl330_thread *thrd)
-{
-	struct pl330_dmac *pl330 = thrd->dmac;
-	struct pl330_info *pi = pl330->pinfo;
-
-	thrd->req[0].mc_cpu = pl330->mcode_cpu
-				+ (thrd->id * pi->mcbufsz);
-	thrd->req[0].mc_bus = pl330->mcode_bus
-				+ (thrd->id * pi->mcbufsz);
-	thrd->req[0].r = NULL;
-	mark_free(thrd, 0);
-
-	thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
-				+ pi->mcbufsz / 2;
-	thrd->req[1].mc_bus = thrd->req[0].mc_bus
-				+ pi->mcbufsz / 2;
-	thrd->req[1].r = NULL;
-	mark_free(thrd, 1);
-}
-
-static int dmac_alloc_threads(struct pl330_dmac *pl330)
-{
-	struct pl330_info *pi = pl330->pinfo;
-	int chans = pi->pcfg.num_chan;
-	struct pl330_thread *thrd;
-	int i;
-
-	/* Allocate 1 Manager and 'chans' Channel threads */
-	pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
-					GFP_KERNEL);
-	if (!pl330->channels)
-		return -ENOMEM;
-
-	/* Init Channel threads */
-	for (i = 0; i < chans; i++) {
-		thrd = &pl330->channels[i];
-		thrd->id = i;
-		thrd->dmac = pl330;
-		_reset_thread(thrd);
-		thrd->free = true;
-	}
-
-	/* MANAGER is indexed at the end */
-	thrd = &pl330->channels[chans];
-	thrd->id = chans;
-	thrd->dmac = pl330;
-	thrd->free = false;
-	pl330->manager = thrd;
-
-	return 0;
-}
-
-static int dmac_alloc_resources(struct pl330_dmac *pl330)
-{
-	struct pl330_info *pi = pl330->pinfo;
-	int chans = pi->pcfg.num_chan;
-	int ret;
-
-	/*
-	 * Alloc MicroCode buffer for 'chans' Channel threads.
-	 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
-	 */
-	pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
-				chans * pi->mcbufsz,
-				&pl330->mcode_bus, GFP_KERNEL);
-	if (!pl330->mcode_cpu) {
-		dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
-			__func__, __LINE__);
-		return -ENOMEM;
-	}
-
-	ret = dmac_alloc_threads(pl330);
-	if (ret) {
-		dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
-			__func__, __LINE__);
-		dma_free_coherent(pi->dev,
-				chans * pi->mcbufsz,
-				pl330->mcode_cpu, pl330->mcode_bus);
-		return ret;
-	}
-
-	return 0;
-}
-
-int pl330_add(struct pl330_info *pi)
-{
-	struct pl330_dmac *pl330;
-	void __iomem *regs;
-	int i, ret;
-
-	if (!pi || !pi->dev)
-		return -EINVAL;
-
-	/* If already added */
-	if (pi->pl330_data)
-		return -EINVAL;
-
-	/*
-	 * If the SoC can perform reset on the DMAC, then do it
-	 * before reading its configuration.
-	 */
-	if (pi->dmac_reset)
-		pi->dmac_reset(pi);
-
-	regs = pi->base;
-
-	/* Check if we can handle this DMAC */
-	if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL
-	   || get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
-		dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
-			get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID));
-		return -EINVAL;
-	}
-
-	/* Read the configuration of the DMAC */
-	read_dmac_config(pi);
-
-	if (pi->pcfg.num_events == 0) {
-		dev_err(pi->dev, "%s:%d Can't work without events!\n",
-			__func__, __LINE__);
-		return -EINVAL;
-	}
-
-	pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
-	if (!pl330) {
-		dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
-			__func__, __LINE__);
-		return -ENOMEM;
-	}
-
-	/* Assign the info structure and private data */
-	pl330->pinfo = pi;
-	pi->pl330_data = pl330;
-
-	spin_lock_init(&pl330->lock);
-
-	INIT_LIST_HEAD(&pl330->req_done);
-
-	/* Use default MC buffer size if not provided */
-	if (!pi->mcbufsz)
-		pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
-
-	/* Mark all events as free */
-	for (i = 0; i < pi->pcfg.num_events; i++)
-		pl330->events[i] = -1;
-
-	/* Allocate resources needed by the DMAC */
-	ret = dmac_alloc_resources(pl330);
-	if (ret) {
-		dev_err(pi->dev, "Unable to create channels for DMAC\n");
-		kfree(pl330);
-		return ret;
-	}
-
-	tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
-
-	pl330->state = INIT;
-
-	return 0;
-}
-EXPORT_SYMBOL(pl330_add);
-
-static int dmac_free_threads(struct pl330_dmac *pl330)
-{
-	struct pl330_info *pi = pl330->pinfo;
-	int chans = pi->pcfg.num_chan;
-	struct pl330_thread *thrd;
-	int i;
-
-	/* Release Channel threads */
-	for (i = 0; i < chans; i++) {
-		thrd = &pl330->channels[i];
-		pl330_release_channel((void *)thrd);
-	}
-
-	/* Free memory */
-	kfree(pl330->channels);
-
-	return 0;
-}
-
-static void dmac_free_resources(struct pl330_dmac *pl330)
-{
-	struct pl330_info *pi = pl330->pinfo;
-	int chans = pi->pcfg.num_chan;
-
-	dmac_free_threads(pl330);
-
-	dma_free_coherent(pi->dev, chans * pi->mcbufsz,
-				pl330->mcode_cpu, pl330->mcode_bus);
-}
-
-void pl330_del(struct pl330_info *pi)
-{
-	struct pl330_dmac *pl330;
-
-	if (!pi || !pi->pl330_data)
-		return;
-
-	pl330 = pi->pl330_data;
-
-	pl330->state = UNINIT;
-
-	tasklet_kill(&pl330->tasks);
-
-	/* Free DMAC resources */
-	dmac_free_resources(pl330);
-
-	kfree(pl330);
-	pi->pl330_data = NULL;
-}
-EXPORT_SYMBOL(pl330_del);
diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h
index 59b8c3892f7..122f86d8c99 100644
--- a/arch/arm/include/asm/hardware/iop_adma.h
+++ b/arch/arm/include/asm/hardware/iop_adma.h
@@ -49,7 +49,6 @@ struct iop_adma_device {
 /**
  * struct iop_adma_chan - internal representation of an ADMA device
  * @pending: allows batching of hardware operations
- * @completed_cookie: identifier for the most recently completed operation
  * @lock: serializes enqueue/dequeue operations to the slot pool
  * @mmr_base: memory mapped register base
  * @chain: device chain view of the descriptors
@@ -62,7 +61,6 @@ struct iop_adma_device {
  */
 struct iop_adma_chan {
 	int pending;
-	dma_cookie_t completed_cookie;
 	spinlock_t lock; /* protects the descriptor slot pool */
 	void __iomem *mmr_base;
 	struct list_head chain;
diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h
deleted file mode 100644
index c1821385abf..00000000000
--- a/arch/arm/include/asm/hardware/pl330.h
+++ /dev/null
@@ -1,217 +0,0 @@
-/* linux/include/asm/hardware/pl330.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __PL330_CORE_H
-#define __PL330_CORE_H
-
-#define PL330_MAX_CHAN		8
-#define PL330_MAX_IRQS		32
-#define PL330_MAX_PERI		32
-
-enum pl330_srccachectrl {
-	SCCTRL0 = 0, /* Noncacheable and nonbufferable */
-	SCCTRL1, /* Bufferable only */
-	SCCTRL2, /* Cacheable, but do not allocate */
-	SCCTRL3, /* Cacheable and bufferable, but do not allocate */
-	SINVALID1,
-	SINVALID2,
-	SCCTRL6, /* Cacheable write-through, allocate on reads only */
-	SCCTRL7, /* Cacheable write-back, allocate on reads only */
-};
-
-enum pl330_dstcachectrl {
-	DCCTRL0 = 0, /* Noncacheable and nonbufferable */
-	DCCTRL1, /* Bufferable only */
-	DCCTRL2, /* Cacheable, but do not allocate */
-	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
-	DINVALID1,              /* AWCACHE = 0x1000 */
-	DINVALID2,
-	DCCTRL6, /* Cacheable write-through, allocate on writes only */
-	DCCTRL7, /* Cacheable write-back, allocate on writes only */
-};
-
-/* Populated by the PL330 core driver for DMA API driver's info */
-struct pl330_config {
-	u32	periph_id;
-	u32	pcell_id;
-#define DMAC_MODE_NS	(1 << 0)
-	unsigned int	mode;
-	unsigned int	data_bus_width:10; /* In number of bits */
-	unsigned int	data_buf_dep:10;
-	unsigned int	num_chan:4;
-	unsigned int	num_peri:6;
-	u32		peri_ns;
-	unsigned int	num_events:6;
-	u32		irq_ns;
-};
-
-/* Handle to the DMAC provided to the PL330 core */
-struct pl330_info {
-	/* Owning device */
-	struct device *dev;
-	/* Size of MicroCode buffers for each channel. */
-	unsigned mcbufsz;
-	/* ioremap'ed address of PL330 registers. */
-	void __iomem	*base;
-	/* Client can freely use it. */
-	void	*client_data;
-	/* PL330 core data, Client must not touch it. */
-	void	*pl330_data;
-	/* Populated by the PL330 core driver during pl330_add */
-	struct pl330_config	pcfg;
-	/*
-	 * If the DMAC has some reset mechanism, then the
-	 * client may want to provide pointer to the method.
-	 */
-	void (*dmac_reset)(struct pl330_info *pi);
-};
-
-enum pl330_byteswap {
-	SWAP_NO = 0,
-	SWAP_2,
-	SWAP_4,
-	SWAP_8,
-	SWAP_16,
-};
-
-/**
- * Request Configuration.
- * The PL330 core does not modify this and uses the last
- * working configuration if the request doesn't provide any.
- *
- * The Client may want to provide this info only for the
- * first request and a request with new settings.
- */
-struct pl330_reqcfg {
-	/* Address Incrementing */
-	unsigned dst_inc:1;
-	unsigned src_inc:1;
-
-	/*
-	 * For now, the SRC & DST protection levels
-	 * and burst size/length are assumed same.
-	 */
-	bool nonsecure;
-	bool privileged;
-	bool insnaccess;
-	unsigned brst_len:5;
-	unsigned brst_size:3; /* in power of 2 */
-
-	enum pl330_dstcachectrl dcctl;
-	enum pl330_srccachectrl scctl;
-	enum pl330_byteswap swap;
-};
-
-/*
- * One cycle of DMAC operation.
- * There may be more than one xfer in a request.
- */
-struct pl330_xfer {
-	u32 src_addr;
-	u32 dst_addr;
-	/* Size to xfer */
-	u32 bytes;
-	/*
-	 * Pointer to next xfer in the list.
-	 * The last xfer in the req must point to NULL.
-	 */
-	struct pl330_xfer *next;
-};
-
-/* The xfer callbacks are made with one of these arguments. */
-enum pl330_op_err {
-	/* The all xfers in the request were success. */
-	PL330_ERR_NONE,
-	/* If req aborted due to global error. */
-	PL330_ERR_ABORT,
-	/* If req failed due to problem with Channel. */
-	PL330_ERR_FAIL,
-};
-
-enum pl330_reqtype {
-	MEMTOMEM,
-	MEMTODEV,
-	DEVTOMEM,
-	DEVTODEV,
-};
-
-/* A request defining Scatter-Gather List ending with NULL xfer. */
-struct pl330_req {
-	enum pl330_reqtype rqtype;
-	/* Index of peripheral for the xfer. */
-	unsigned peri:5;
-	/* Unique token for this xfer, set by the client. */
-	void *token;
-	/* Callback to be called after xfer. */
-	void (*xfer_cb)(void *token, enum pl330_op_err err);
-	/* If NULL, req will be done at last set parameters. */
-	struct pl330_reqcfg *cfg;
-	/* Pointer to first xfer in the request. */
-	struct pl330_xfer *x;
-};
-
-/*
- * To know the status of the channel and DMAC, the client
- * provides a pointer to this structure. The PL330 core
- * fills it with current information.
- */
-struct pl330_chanstatus {
-	/*
-	 * If the DMAC engine halted due to some error,
-	 * the client should remove-add DMAC.
-	 */
-	bool dmac_halted;
-	/*
-	 * If channel is halted due to some error,
-	 * the client should ABORT/FLUSH and START the channel.
-	 */
-	bool faulting;
-	/* Location of last load */
-	u32 src_addr;
-	/* Location of last store */
-	u32 dst_addr;
-	/*
-	 * Pointer to the currently active req, NULL if channel is
-	 * inactive, even though the requests may be present.
-	 */
-	struct pl330_req *top_req;
-	/* Pointer to req waiting second in the queue if any. */
-	struct pl330_req *wait_req;
-};
-
-enum pl330_chan_op {
-	/* Start the channel */
-	PL330_OP_START,
-	/* Abort the active xfer */
-	PL330_OP_ABORT,
-	/* Stop xfer and flush queue */
-	PL330_OP_FLUSH,
-};
-
-extern int pl330_add(struct pl330_info *);
-extern void pl330_del(struct pl330_info *pi);
-extern int pl330_update(const struct pl330_info *pi);
-extern void pl330_release_channel(void *ch_id);
-extern void *pl330_request_channel(const struct pl330_info *pi);
-extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus);
-extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op);
-extern int pl330_submit_req(void *ch_id, struct pl330_req *r);
-
-#endif	/* __PL330_CORE_H */
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 4320b209678..698479f1e19 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -437,7 +437,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 
 	/* DMA slave channel configuration */
 	atslave->dma_dev = &at_hdmac_device.dev;
-	atslave->reg_width = AT_DMA_SLAVE_WIDTH_32BIT;
 	atslave->cfg = ATC_FIFOCFG_HALFFIFO
 			| ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
 	atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16;
diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
index 187cb58345c..fff48d1a0f4 100644
--- a/arch/arm/mach-at91/include/mach/at_hdmac.h
+++ b/arch/arm/mach-at91/include/mach/at_hdmac.h
@@ -24,18 +24,6 @@ struct at_dma_platform_data {
 };
 
 /**
- * enum at_dma_slave_width - DMA slave register access width.
- * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
- * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
- * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
- */
-enum at_dma_slave_width {
-	AT_DMA_SLAVE_WIDTH_8BIT = 0,
-	AT_DMA_SLAVE_WIDTH_16BIT,
-	AT_DMA_SLAVE_WIDTH_32BIT,
-};
-
-/**
  * struct at_dma_slave - Controller-specific information about a slave
  * @dma_dev: required DMA master device
  * @tx_reg: physical address of data register used for
@@ -48,9 +36,6 @@ enum at_dma_slave_width {
  */
 struct at_dma_slave {
 	struct device		*dma_dev;
-	dma_addr_t		tx_reg;
-	dma_addr_t		rx_reg;
-	enum at_dma_slave_width	reg_width;
 	u32			cfg;
 	u32			ctrla;
 };
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 52359f80c42..7561eca131b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,6 +1,3 @@
-config IMX_HAVE_DMA_V1
-	bool
-
 config HAVE_IMX_GPC
 	bool
 
@@ -38,7 +35,6 @@ config SOC_IMX1
 	bool
 	select ARCH_MX1
 	select CPU_ARM920T
-	select IMX_HAVE_DMA_V1
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
@@ -46,7 +42,6 @@ config SOC_IMX21
 	bool
 	select MACH_MX21
 	select CPU_ARM926T
-	select IMX_HAVE_DMA_V1
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
@@ -61,7 +56,6 @@ config SOC_IMX27
 	bool
 	select MACH_MX27
 	select CPU_ARM926T
-	select IMX_HAVE_DMA_V1
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 35fc450fa26..ab939c5046c 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,5 +1,3 @@
-obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
-
 obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o
 
diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c
deleted file mode 100644
index 3189a6004cf..00000000000
--- a/arch/arm/mach-imx/dma-v1.c
+++ /dev/null
@@ -1,845 +0,0 @@
-/*
- *  linux/arch/arm/plat-mxc/dma-v1.c
- *
- *  i.MX DMA registration and IRQ dispatching
- *
- * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
- * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/scatterlist.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma-v1.h>
-
-#define DMA_DCR     0x00		/* Control Register */
-#define DMA_DISR    0x04		/* Interrupt status Register */
-#define DMA_DIMR    0x08		/* Interrupt mask Register */
-#define DMA_DBTOSR  0x0c		/* Burst timeout status Register */
-#define DMA_DRTOSR  0x10		/* Request timeout Register */
-#define DMA_DSESR   0x14		/* Transfer Error Status Register */
-#define DMA_DBOSR   0x18		/* Buffer overflow status Register */
-#define DMA_DBTOCR  0x1c		/* Burst timeout control Register */
-#define DMA_WSRA    0x40		/* W-Size Register A */
-#define DMA_XSRA    0x44		/* X-Size Register A */
-#define DMA_YSRA    0x48		/* Y-Size Register A */
-#define DMA_WSRB    0x4c		/* W-Size Register B */
-#define DMA_XSRB    0x50		/* X-Size Register B */
-#define DMA_YSRB    0x54		/* Y-Size Register B */
-#define DMA_SAR(x)  (0x80 + ((x) << 6))	/* Source Address Registers */
-#define DMA_DAR(x)  (0x84 + ((x) << 6))	/* Destination Address Registers */
-#define DMA_CNTR(x) (0x88 + ((x) << 6))	/* Count Registers */
-#define DMA_CCR(x)  (0x8c + ((x) << 6))	/* Control Registers */
-#define DMA_RSSR(x) (0x90 + ((x) << 6))	/* Request source select Registers */
-#define DMA_BLR(x)  (0x94 + ((x) << 6))	/* Burst length Registers */
-#define DMA_RTOR(x) (0x98 + ((x) << 6))	/* Request timeout Registers */
-#define DMA_BUCR(x) (0x98 + ((x) << 6))	/* Bus Utilization Registers */
-#define DMA_CCNR(x) (0x9C + ((x) << 6))	/* Channel counter Registers */
-
-#define DCR_DRST           (1<<1)
-#define DCR_DEN            (1<<0)
-#define DBTOCR_EN          (1<<15)
-#define DBTOCR_CNT(x)      ((x) & 0x7fff)
-#define CNTR_CNT(x)        ((x) & 0xffffff)
-#define CCR_ACRPT          (1<<14)
-#define CCR_DMOD_LINEAR    (0x0 << 12)
-#define CCR_DMOD_2D        (0x1 << 12)
-#define CCR_DMOD_FIFO      (0x2 << 12)
-#define CCR_DMOD_EOBFIFO   (0x3 << 12)
-#define CCR_SMOD_LINEAR    (0x0 << 10)
-#define CCR_SMOD_2D        (0x1 << 10)
-#define CCR_SMOD_FIFO      (0x2 << 10)
-#define CCR_SMOD_EOBFIFO   (0x3 << 10)
-#define CCR_MDIR_DEC       (1<<9)
-#define CCR_MSEL_B         (1<<8)
-#define CCR_DSIZ_32        (0x0 << 6)
-#define CCR_DSIZ_8         (0x1 << 6)
-#define CCR_DSIZ_16        (0x2 << 6)
-#define CCR_SSIZ_32        (0x0 << 4)
-#define CCR_SSIZ_8         (0x1 << 4)
-#define CCR_SSIZ_16        (0x2 << 4)
-#define CCR_REN            (1<<3)
-#define CCR_RPT            (1<<2)
-#define CCR_FRC            (1<<1)
-#define CCR_CEN            (1<<0)
-#define RTOR_EN            (1<<15)
-#define RTOR_CLK           (1<<14)
-#define RTOR_PSC           (1<<13)
-
-/*
- * struct imx_dma_channel - i.MX specific DMA extension
- * @name: name specified by DMA client
- * @irq_handler: client callback for end of transfer
- * @err_handler: client callback for error condition
- * @data: clients context data for callbacks
- * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
- * @sg: pointer to the actual read/written chunk for scatter-gather emulation
- * @resbytes: total residual number of bytes to transfer
- *            (it can be lower or same as sum of SG mapped chunk sizes)
- * @sgcount: number of chunks to be read/written
- *
- * Structure is used for IMX DMA processing. It would be probably good
- * @struct dma_struct in the future for external interfacing and use
- * @struct imx_dma_channel only as extension to it.
- */
-
-struct imx_dma_channel {
-	const char *name;
-	void (*irq_handler) (int, void *);
-	void (*err_handler) (int, void *, int errcode);
-	void (*prog_handler) (int, void *, struct scatterlist *);
-	void *data;
-	unsigned int dma_mode;
-	struct scatterlist *sg;
-	unsigned int resbytes;
-	int dma_num;
-
-	int in_use;
-
-	u32 ccr_from_device;
-	u32 ccr_to_device;
-
-	struct timer_list watchdog;
-
-	int hw_chaining;
-};
-
-static void __iomem *imx_dmav1_baseaddr;
-
-static void imx_dmav1_writel(unsigned val, unsigned offset)
-{
-	__raw_writel(val, imx_dmav1_baseaddr + offset);
-}
-
-static unsigned imx_dmav1_readl(unsigned offset)
-{
-	return __raw_readl(imx_dmav1_baseaddr + offset);
-}
-
-static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-static struct clk *dma_clk;
-
-static int imx_dma_hw_chain(struct imx_dma_channel *imxdma)
-{
-	if (cpu_is_mx27())
-		return imxdma->hw_chaining;
-	else
-		return 0;
-}
-
-/*
- * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
- */
-static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	unsigned long now;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, channel);
-		return 0;
-	}
-
-	now = min(imxdma->resbytes, sg->length);
-	if (imxdma->resbytes != IMX_DMA_LENGTH_LOOP)
-		imxdma->resbytes -= now;
-
-	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
-		imx_dmav1_writel(sg->dma_address, DMA_DAR(channel));
-	else
-		imx_dmav1_writel(sg->dma_address, DMA_SAR(channel));
-
-	imx_dmav1_writel(now, DMA_CNTR(channel));
-
-	pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, "
-		"size 0x%08x\n", channel,
-		 imx_dmav1_readl(DMA_DAR(channel)),
-		 imx_dmav1_readl(DMA_SAR(channel)),
-		 imx_dmav1_readl(DMA_CNTR(channel)));
-
-	return now;
-}
-
-/**
- * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from
- * device transfer
- *
- * @channel: i.MX DMA channel number
- * @dma_address: the DMA/physical memory address of the linear data block
- *		to transfer
- * @dma_length: length of the data block in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- *		Zero indicates success.
- */
-int
-imx_dma_setup_single(int channel, dma_addr_t dma_address,
-		     unsigned int dma_length, unsigned int dev_addr,
-		     unsigned int dmamode)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-
-	imxdma->sg = NULL;
-	imxdma->dma_mode = dmamode;
-
-	if (!dma_address) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
-		       channel);
-		return -EINVAL;
-	}
-
-	if (!dma_length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
-		       channel);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
-			"dev_addr=0x%08x for read\n",
-			channel, __func__, (unsigned int)dma_address,
-			dma_length, dev_addr);
-
-		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
-		imx_dmav1_writel(dma_address, DMA_DAR(channel));
-		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
-			"dev_addr=0x%08x for write\n",
-			channel, __func__, (unsigned int)dma_address,
-			dma_length, dev_addr);
-
-		imx_dmav1_writel(dma_address, DMA_SAR(channel));
-		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
-		imx_dmav1_writel(imxdma->ccr_to_device,
-				DMA_CCR(channel));
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
-		       channel);
-		return -EINVAL;
-	}
-
-	imx_dmav1_writel(dma_length, DMA_CNTR(channel));
-
-	return 0;
-}
-EXPORT_SYMBOL(imx_dma_setup_single);
-
-/**
- * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
- * @channel: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- * @dma_length: total length of the transfer request in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function sets up DMA channel state and registers to be ready for
- * transfer specified by provided parameters. The scatter-gather emulation
- * is set up according to the parameters.
- *
- * The full preparation of the transfer requires setup of more register
- * by the caller before imx_dma_enable() can be called.
- *
- * %BLR(channel) holds transfer burst length in bytes, 0 means 64 bytes
- *
- * %RSSR(channel) has to be set to the DMA request line source %DMA_REQ_xxx
- *
- * %CCR(channel) has to specify transfer parameters, the next settings is
- * typical for linear or simple scatter-gather transfers if %DMA_MODE_READ is
- * specified
- *
- * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
- *
- * The typical setup for %DMA_MODE_WRITE is specified by next options
- * combination
- *
- * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
- *
- * Be careful here and do not mistakenly mix source and target device
- * port sizes constants, they are really different:
- * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
- * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_sg(int channel,
-		 struct scatterlist *sg, unsigned int sgcount,
-		 unsigned int dma_length, unsigned int dev_addr,
-		 unsigned int dmamode)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-
-	if (imxdma->in_use)
-		return -EBUSY;
-
-	imxdma->sg = sg;
-	imxdma->dma_mode = dmamode;
-	imxdma->resbytes = dma_length;
-
-	if (!sg || !sgcount) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg empty sg list\n",
-		       channel);
-		return -EINVAL;
-	}
-
-	if (!sg->length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
-		       channel);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
-			"dev_addr=0x%08x for read\n",
-			channel, __func__, sg, sgcount, dma_length, dev_addr);
-
-		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
-		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
-			"dev_addr=0x%08x for write\n",
-			channel, __func__, sg, sgcount, dma_length, dev_addr);
-
-		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
-		imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel));
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
-		       channel);
-		return -EINVAL;
-	}
-
-	imx_dma_sg_next(channel, sg);
-
-	return 0;
-}
-EXPORT_SYMBOL(imx_dma_setup_sg);
-
-int
-imx_dma_config_channel(int channel, unsigned int config_port,
-	unsigned int config_mem, unsigned int dmareq, int hw_chaining)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	u32 dreq = 0;
-
-	imxdma->hw_chaining = 0;
-
-	if (hw_chaining) {
-		imxdma->hw_chaining = 1;
-		if (!imx_dma_hw_chain(imxdma))
-			return -EINVAL;
-	}
-
-	if (dmareq)
-		dreq = CCR_REN;
-
-	imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq;
-	imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq;
-
-	imx_dmav1_writel(dmareq, DMA_RSSR(channel));
-
-	return 0;
-}
-EXPORT_SYMBOL(imx_dma_config_channel);
-
-void imx_dma_config_burstlen(int channel, unsigned int burstlen)
-{
-	imx_dmav1_writel(burstlen, DMA_BLR(channel));
-}
-EXPORT_SYMBOL(imx_dma_config_burstlen);
-
-/**
- * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification
- * handlers
- * @channel: i.MX DMA channel number
- * @irq_handler: the pointer to the function called if the transfer
- *		ends successfully
- * @err_handler: the pointer to the function called if the premature
- *		end caused by error occurs
- * @data: user specified value to be passed to the handlers
- */
-int
-imx_dma_setup_handlers(int channel,
-		       void (*irq_handler) (int, void *),
-		       void (*err_handler) (int, void *, int),
-		       void *data)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	unsigned long flags;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, channel);
-		return -ENODEV;
-	}
-
-	local_irq_save(flags);
-	imx_dmav1_writel(1 << channel, DMA_DISR);
-	imxdma->irq_handler = irq_handler;
-	imxdma->err_handler = err_handler;
-	imxdma->data = data;
-	local_irq_restore(flags);
-	return 0;
-}
-EXPORT_SYMBOL(imx_dma_setup_handlers);
-
-/**
- * imx_dma_setup_progression_handler - setup i.MX DMA channel progression
- * handlers
- * @channel: i.MX DMA channel number
- * @prog_handler: the pointer to the function called if the transfer progresses
- */
-int
-imx_dma_setup_progression_handler(int channel,
-			void (*prog_handler) (int, void*, struct scatterlist*))
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	unsigned long flags;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, channel);
-		return -ENODEV;
-	}
-
-	local_irq_save(flags);
-	imxdma->prog_handler = prog_handler;
-	local_irq_restore(flags);
-	return 0;
-}
-EXPORT_SYMBOL(imx_dma_setup_progression_handler);
-
-/**
- * imx_dma_enable - function to start i.MX DMA channel operation
- * @channel: i.MX DMA channel number
- *
- * The channel has to be allocated by driver through imx_dma_request()
- * or imx_dma_request_by_prio() function.
- * The transfer parameters has to be set to the channel registers through
- * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
- * and registers %BLR(channel), %RSSR(channel) and %CCR(channel) has to
- * be set prior this function call by the channel user.
- */
-void imx_dma_enable(int channel)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_enable\n", channel);
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, channel);
-		return;
-	}
-
-	if (imxdma->in_use)
-		return;
-
-	local_irq_save(flags);
-
-	imx_dmav1_writel(1 << channel, DMA_DISR);
-	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR);
-	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN |
-		CCR_ACRPT, DMA_CCR(channel));
-
-	if ((cpu_is_mx21() || cpu_is_mx27()) &&
-			imxdma->sg && imx_dma_hw_chain(imxdma)) {
-		imxdma->sg = sg_next(imxdma->sg);
-		if (imxdma->sg) {
-			u32 tmp;
-			imx_dma_sg_next(channel, imxdma->sg);
-			tmp = imx_dmav1_readl(DMA_CCR(channel));
-			imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT,
-				DMA_CCR(channel));
-		}
-	}
-	imxdma->in_use = 1;
-
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(imx_dma_enable);
-
-/**
- * imx_dma_disable - stop, finish i.MX DMA channel operatin
- * @channel: i.MX DMA channel number
- */
-void imx_dma_disable(int channel)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_disable\n", channel);
-
-	if (imx_dma_hw_chain(imxdma))
-		del_timer(&imxdma->watchdog);
-
-	local_irq_save(flags);
-	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR);
-	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN,
-			DMA_CCR(channel));
-	imx_dmav1_writel(1 << channel, DMA_DISR);
-	imxdma->in_use = 0;
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(imx_dma_disable);
-
-static void imx_dma_watchdog(unsigned long chno)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
-
-	imx_dmav1_writel(0, DMA_CCR(chno));
-	imxdma->in_use = 0;
-	imxdma->sg = NULL;
-
-	if (imxdma->err_handler)
-		imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT);
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
-	int i, disr;
-	struct imx_dma_channel *imxdma;
-	unsigned int err_mask;
-	int errcode;
-
-	disr = imx_dmav1_readl(DMA_DISR);
-
-	err_mask = imx_dmav1_readl(DMA_DBTOSR) |
-		   imx_dmav1_readl(DMA_DRTOSR) |
-		   imx_dmav1_readl(DMA_DSESR)  |
-		   imx_dmav1_readl(DMA_DBOSR);
-
-	if (!err_mask)
-		return IRQ_HANDLED;
-
-	imx_dmav1_writel(disr & err_mask, DMA_DISR);
-
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if (!(err_mask & (1 << i)))
-			continue;
-		imxdma = &imx_dma_channels[i];
-		errcode = 0;
-
-		if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) {
-			imx_dmav1_writel(1 << i, DMA_DBTOSR);
-			errcode |= IMX_DMA_ERR_BURST;
-		}
-		if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) {
-			imx_dmav1_writel(1 << i, DMA_DRTOSR);
-			errcode |= IMX_DMA_ERR_REQUEST;
-		}
-		if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) {
-			imx_dmav1_writel(1 << i, DMA_DSESR);
-			errcode |= IMX_DMA_ERR_TRANSFER;
-		}
-		if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) {
-			imx_dmav1_writel(1 << i, DMA_DBOSR);
-			errcode |= IMX_DMA_ERR_BUFFER;
-		}
-		if (imxdma->name && imxdma->err_handler) {
-			imxdma->err_handler(i, imxdma->data, errcode);
-			continue;
-		}
-
-		imx_dma_channels[i].sg = NULL;
-
-		printk(KERN_WARNING
-		       "DMA timeout on channel %d (%s) -%s%s%s%s\n",
-		       i, imxdma->name,
-		       errcode & IMX_DMA_ERR_BURST ?    " burst" : "",
-		       errcode & IMX_DMA_ERR_REQUEST ?  " request" : "",
-		       errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
-		       errcode & IMX_DMA_ERR_BUFFER ?   " buffer" : "");
-	}
-	return IRQ_HANDLED;
-}
-
-static void dma_irq_handle_channel(int chno)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
-
-	if (!imxdma->name) {
-		/*
-		 * IRQ for an unregistered DMA channel:
-		 * let's clear the interrupts and disable it.
-		 */
-		printk(KERN_WARNING
-		       "spurious IRQ for DMA channel %d\n", chno);
-		return;
-	}
-
-	if (imxdma->sg) {
-		u32 tmp;
-		struct scatterlist *current_sg = imxdma->sg;
-		imxdma->sg = sg_next(imxdma->sg);
-
-		if (imxdma->sg) {
-			imx_dma_sg_next(chno, imxdma->sg);
-
-			tmp = imx_dmav1_readl(DMA_CCR(chno));
-
-			if (imx_dma_hw_chain(imxdma)) {
-				/* FIXME: The timeout should probably be
-				 * configurable
-				 */
-				mod_timer(&imxdma->watchdog,
-					jiffies + msecs_to_jiffies(500));
-
-				tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT;
-				imx_dmav1_writel(tmp, DMA_CCR(chno));
-			} else {
-				imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno));
-				tmp |= CCR_CEN;
-			}
-
-			imx_dmav1_writel(tmp, DMA_CCR(chno));
-
-			if (imxdma->prog_handler)
-				imxdma->prog_handler(chno, imxdma->data,
-						current_sg);
-
-			return;
-		}
-
-		if (imx_dma_hw_chain(imxdma)) {
-			del_timer(&imxdma->watchdog);
-			return;
-		}
-	}
-
-	imx_dmav1_writel(0, DMA_CCR(chno));
-	imxdma->in_use = 0;
-	if (imxdma->irq_handler)
-		imxdma->irq_handler(chno, imxdma->data);
-}
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i, disr;
-
-	if (cpu_is_mx21() || cpu_is_mx27())
-		dma_err_handler(irq, dev_id);
-
-	disr = imx_dmav1_readl(DMA_DISR);
-
-	pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
-		     disr);
-
-	imx_dmav1_writel(disr, DMA_DISR);
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if (disr & (1 << i))
-			dma_irq_handle_channel(i);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/**
- * imx_dma_request - request/allocate specified channel number
- * @channel: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- */
-int imx_dma_request(int channel, const char *name)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	unsigned long flags;
-	int ret = 0;
-
-	/* basic sanity checks */
-	if (!name)
-		return -EINVAL;
-
-	if (channel >= IMX_DMA_CHANNELS) {
-		printk(KERN_CRIT "%s: called for  non-existed channel %d\n",
-		       __func__, channel);
-		return -EINVAL;
-	}
-
-	local_irq_save(flags);
-	if (imxdma->name) {
-		local_irq_restore(flags);
-		return -EBUSY;
-	}
-	memset(imxdma, 0, sizeof(*imxdma));
-	imxdma->name = name;
-	local_irq_restore(flags); /* request_irq() can block */
-
-	if (cpu_is_mx21() || cpu_is_mx27()) {
-		ret = request_irq(MX2x_INT_DMACH0 + channel,
-				dma_irq_handler, 0, "DMA", NULL);
-		if (ret) {
-			imxdma->name = NULL;
-			pr_crit("Can't register IRQ %d for DMA channel %d\n",
-					MX2x_INT_DMACH0 + channel, channel);
-			return ret;
-		}
-		init_timer(&imxdma->watchdog);
-		imxdma->watchdog.function = &imx_dma_watchdog;
-		imxdma->watchdog.data = channel;
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(imx_dma_request);
-
-/**
- * imx_dma_free - release previously acquired channel
- * @channel: i.MX DMA channel number
- */
-void imx_dma_free(int channel)
-{
-	unsigned long flags;
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT
-		       "%s: trying to free free channel %d\n",
-		       __func__, channel);
-		return;
-	}
-
-	local_irq_save(flags);
-	/* Disable interrupts */
-	imx_dma_disable(channel);
-	imxdma->name = NULL;
-
-	if (cpu_is_mx21() || cpu_is_mx27())
-		free_irq(MX2x_INT_DMACH0 + channel, NULL);
-
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(imx_dma_free);
-
-/**
- * imx_dma_request_by_prio - find and request some of free channels best
- * suiting requested priority
- * @channel: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- *
- * This function tries to find a free channel in the specified priority group
- * if the priority cannot be achieved it tries to look for free channel
- * in the higher and then even lower priority groups.
- *
- * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- *               On successful allocation channel is returned.
- */
-int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio)
-{
-	int i;
-	int best;
-
-	switch (prio) {
-	case (DMA_PRIO_HIGH):
-		best = 8;
-		break;
-	case (DMA_PRIO_MEDIUM):
-		best = 4;
-		break;
-	case (DMA_PRIO_LOW):
-	default:
-		best = 0;
-		break;
-	}
-
-	for (i = best; i < IMX_DMA_CHANNELS; i++)
-		if (!imx_dma_request(i, name))
-			return i;
-
-	for (i = best - 1; i >= 0; i--)
-		if (!imx_dma_request(i, name))
-			return i;
-
-	printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
-
-	return -ENODEV;
-}
-EXPORT_SYMBOL(imx_dma_request_by_prio);
-
-static int __init imx_dma_init(void)
-{
-	int ret = 0;
-	int i;
-
-	if (cpu_is_mx1())
-		imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
-	else if (cpu_is_mx21())
-		imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
-	else if (cpu_is_mx27())
-		imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
-	else
-		return 0;
-
-	dma_clk = clk_get(NULL, "dma");
-	if (IS_ERR(dma_clk))
-		return PTR_ERR(dma_clk);
-	clk_enable(dma_clk);
-
-	/* reset DMA module */
-	imx_dmav1_writel(DCR_DRST, DMA_DCR);
-
-	if (cpu_is_mx1()) {
-		ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-		if (ret) {
-			pr_crit("Wow!  Can't register IRQ for DMA\n");
-			return ret;
-		}
-
-		ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL);
-		if (ret) {
-			pr_crit("Wow!  Can't register ERRIRQ for DMA\n");
-			free_irq(MX1_DMA_INT, NULL);
-			return ret;
-		}
-	}
-
-	/* enable DMA module */
-	imx_dmav1_writel(DCR_DEN, DMA_DCR);
-
-	/* clear all interrupts */
-	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR);
-
-	/* disable interrupts */
-	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR);
-
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		imx_dma_channels[i].sg = NULL;
-		imx_dma_channels[i].dma_num = i;
-	}
-
-	return ret;
-}
-
-arch_initcall(imx_dma_init);
diff --git a/arch/arm/mach-imx/include/mach/dma-v1.h b/arch/arm/mach-imx/include/mach/dma-v1.h
deleted file mode 100644
index ac6fd713828..00000000000
--- a/arch/arm/mach-imx/include/mach/dma-v1.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/include/mach/dma-v1.h
- *
- *  i.MX DMA registration and IRQ dispatching
- *
- * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
- * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_DMA_V1_H__
-#define __MACH_DMA_V1_H__
-
-#define imx_has_dma_v1()	(cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
-
-#include <mach/dma.h>
-
-#define IMX_DMA_CHANNELS  16
-
-#define DMA_MODE_READ		0
-#define DMA_MODE_WRITE		1
-#define DMA_MODE_MASK		1
-
-#define MX1_DMA_REG(offset)	MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset))
-
-/* DMA Interrupt Mask Register */
-#define MX1_DMA_DIMR		MX1_DMA_REG(0x08)
-
-/* Channel Control Register */
-#define MX1_DMA_CCR(x)		MX1_DMA_REG(0x8c + ((x) << 6))
-
-#define IMX_DMA_MEMSIZE_32	(0 << 4)
-#define IMX_DMA_MEMSIZE_8	(1 << 4)
-#define IMX_DMA_MEMSIZE_16	(2 << 4)
-#define IMX_DMA_TYPE_LINEAR	(0 << 10)
-#define IMX_DMA_TYPE_2D		(1 << 10)
-#define IMX_DMA_TYPE_FIFO	(2 << 10)
-
-#define IMX_DMA_ERR_BURST     (1 << 0)
-#define IMX_DMA_ERR_REQUEST   (1 << 1)
-#define IMX_DMA_ERR_TRANSFER  (1 << 2)
-#define IMX_DMA_ERR_BUFFER    (1 << 3)
-#define IMX_DMA_ERR_TIMEOUT   (1 << 4)
-
-int
-imx_dma_config_channel(int channel, unsigned int config_port,
-	unsigned int config_mem, unsigned int dmareq, int hw_chaining);
-
-void
-imx_dma_config_burstlen(int channel, unsigned int burstlen);
-
-int
-imx_dma_setup_single(int channel, dma_addr_t dma_address,
-		unsigned int dma_length, unsigned int dev_addr,
-		unsigned int dmamode);
-
-
-/*
- * Use this flag as the dma_length argument to imx_dma_setup_sg()
- * to create an endless running dma loop. The end of the scatterlist
- * must be linked to the beginning for this to work.
- */
-#define IMX_DMA_LENGTH_LOOP	((unsigned int)-1)
-
-int
-imx_dma_setup_sg(int channel, struct scatterlist *sg,
-		unsigned int sgcount, unsigned int dma_length,
-		unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_handlers(int channel,
-		void (*irq_handler) (int, void *),
-		void (*err_handler) (int, void *, int), void *data);
-
-int
-imx_dma_setup_progression_handler(int channel,
-		void (*prog_handler) (int, void*, struct scatterlist*));
-
-void imx_dma_enable(int channel);
-
-void imx_dma_disable(int channel);
-
-int imx_dma_request(int channel, const char *name);
-
-void imx_dma_free(int channel);
-
-int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
-
-#endif	/* __MACH_DMA_V1_H__ */
diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
index fd0ee84c45d..9ff93b06568 100644
--- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h
+++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
@@ -200,8 +200,7 @@ dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
 	sg.dma_address = addr;
 	sg.length = size;
 
-	return chan->device->device_prep_slave_sg(chan, &sg, 1,
-						  direction, flags);
+	return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags);
 }
 
 #else
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index 301d9c319d0..eb9f4f53400 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -79,11 +79,11 @@ static int samsung_dmadev_prepare(unsigned ch,
 			    info->len, offset_in_page(info->buf));
 		sg_dma_address(&sg) = info->buf;
 
-		desc = chan->device->device_prep_slave_sg(chan,
+		desc = dmaengine_prep_slave_sg(chan,
 			&sg, 1, info->direction, DMA_PREP_INTERRUPT);
 		break;
 	case DMA_CYCLIC:
-		desc = chan->device->device_prep_dma_cyclic(chan,
+		desc = dmaengine_prep_dma_cyclic(chan,
 			info->buf, info->len, info->period, info->direction);
 		break;
 	default: