summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorRichard Purdie <rpurdie@rpsys.net>2005-11-10 17:42:29 +0000
committerRussell King <rmk+kernel@arm.linux.org.uk>2005-11-10 17:42:29 +0000
commit078abcf95cdb95c78d786dbc61ae3c22ee70fb61 (patch)
treefec0579ccb61371019248eee68c624734c8533d2 /arch/arm
parentb1faebb672edecf48d4745fb05eeca3c704b6823 (diff)
[ARM] 3096/1: Add SharpSL Zaurus power and battery management core driver
Patch from Richard Purdie This patch adds a power and battery management core driver which with the addition of the right device files, supports the c7x0 and cxx00 series of Sharp Zaurus handhelds. The driver is complex for several reasons. Battery charging is manually monitored and controlled. When suspended, the device needs to periodically partially resume, check the charging status and then re-suspend. It does without bothering the higher linux layers as a full resume and re-suspend is unnecessary. The code is carefully written to avoid interrupts or calling code outside the module under these circumstances. It also vets the various wake up sources and monitors the device's power situation. Hooks to limit the backlight intensity and to notify the battery monitoring code of backlight events are connected/added as the backlight is one of the biggest users of power on the device. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-pxa/sharpsl.h87
-rw-r--r--arch/arm/mach-pxa/sharpsl_pm.c992
2 files changed, 1079 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 3977a77aacd..4879c0f7da7 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -32,3 +32,90 @@ void corgi_put_hsync(void);
void spitz_put_hsync(void);
void corgi_wait_hsync(void);
void spitz_wait_hsync(void);
+
+/*
+ * SharpSL Battery/PM Driver
+ */
+
+struct sharpsl_charger_machinfo {
+ void (*init)(void);
+ int gpio_acin;
+ int gpio_batfull;
+ int gpio_batlock;
+ int gpio_fatal;
+ int (*status_acin)(void);
+ void (*discharge)(int);
+ void (*discharge1)(int);
+ void (*charge)(int);
+ void (*chargeled)(int);
+ void (*measure_temp)(int);
+ void (*presuspend)(void);
+ void (*postsuspend)(void);
+ unsigned long (*charger_wakeup)(void);
+ int (*should_wakeup)(unsigned int resume_on_alarm);
+ int bat_levels;
+ struct battery_thresh *bat_levels_noac;
+ struct battery_thresh *bat_levels_acin;
+ int status_high_acin;
+ int status_low_acin;
+ int status_high_noac;
+ int status_low_noac;
+};
+
+struct battery_thresh {
+ int voltage;
+ int percentage;
+};
+
+struct battery_stat {
+ int ac_status; /* APM AC Present/Not Present */
+ int mainbat_status; /* APM Main Battery Status */
+ int mainbat_percent; /* Main Battery Percentage Charge */
+ int mainbat_voltage; /* Main Battery Voltage */
+};
+
+struct sharpsl_pm_status {
+ struct device *dev;
+ struct timer_list ac_timer;
+ struct timer_list chrg_full_timer;
+
+ int charge_mode;
+#define CHRG_ERROR (-1)
+#define CHRG_OFF (0)
+#define CHRG_ON (1)
+#define CHRG_DONE (2)
+
+ unsigned int flags;
+#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */
+#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */
+#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */
+#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */
+#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */
+
+ int full_count;
+ unsigned long charge_start_time;
+ struct sharpsl_charger_machinfo *machinfo;
+ struct battery_stat battstat;
+};
+
+extern struct sharpsl_pm_status sharpsl_pm;
+extern struct battery_thresh spitz_battery_levels_acin[];
+extern struct battery_thresh spitz_battery_levels_noac[];
+
+#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x))
+
+#define SHARPSL_LED_ERROR 2
+#define SHARPSL_LED_ON 1
+#define SHARPSL_LED_OFF 0
+
+#define CHARGE_ON() sharpsl_pm.machinfo->charge(1)
+#define CHARGE_OFF() sharpsl_pm.machinfo->charge(0)
+#define CHARGE_LED_ON() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ON)
+#define CHARGE_LED_OFF() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_OFF)
+#define CHARGE_LED_ERR() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR)
+#define DISCHARGE_ON() sharpsl_pm.machinfo->discharge(1)
+#define DISCHARGE_OFF() sharpsl_pm.machinfo->discharge(0)
+#define STATUS_AC_IN sharpsl_pm.machinfo->status_acin()
+#define STATUS_BATT_LOCKED READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock)
+#define STATUS_CHRG_FULL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull)
+#define STATUS_FATAL READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal)
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
new file mode 100644
index 00000000000..6c9e871c53d
--- /dev/null
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -0,0 +1,992 @@
+/*
+ * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
+ * series of PDAs
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on code written by Sharp for 2.4 kernels
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/apm_bios.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/scoop.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/apm.h>
+
+#include <asm/arch/pm.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/sharpsl.h>
+#include "sharpsl.h"
+
+/*
+ * Constants
+ */
+#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */
+#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */
+#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */
+#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */
+#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */
+#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD 10 /* 10 msec */
+#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */
+#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */
+#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */
+
+#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
+#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
+#define SHARPSL_CHARGE_ON_JKVAD_HIGH 0x9b /* 6V */
+#define SHARPSL_CHARGE_ON_JKVAD_LOW 0x34 /* 2V */
+#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */
+#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */
+
+struct battery_thresh spitz_battery_levels_acin[] = {
+ { 213, 100},
+ { 212, 98},
+ { 211, 95},
+ { 210, 93},
+ { 209, 90},
+ { 208, 88},
+ { 207, 85},
+ { 206, 83},
+ { 205, 80},
+ { 204, 78},
+ { 203, 75},
+ { 202, 73},
+ { 201, 70},
+ { 200, 68},
+ { 199, 65},
+ { 198, 63},
+ { 197, 60},
+ { 196, 58},
+ { 195, 55},
+ { 194, 53},
+ { 193, 50},
+ { 192, 48},
+ { 192, 45},
+ { 191, 43},
+ { 191, 40},
+ { 190, 38},
+ { 190, 35},
+ { 189, 33},
+ { 188, 30},
+ { 187, 28},
+ { 186, 25},
+ { 185, 23},
+ { 184, 20},
+ { 183, 18},
+ { 182, 15},
+ { 181, 13},
+ { 180, 10},
+ { 179, 8},
+ { 178, 5},
+ { 0, 0},
+};
+
+struct battery_thresh spitz_battery_levels_noac[] = {
+ { 213, 100},
+ { 212, 98},
+ { 211, 95},
+ { 210, 93},
+ { 209, 90},
+ { 208, 88},
+ { 207, 85},
+ { 206, 83},
+ { 205, 80},
+ { 204, 78},
+ { 203, 75},
+ { 202, 73},
+ { 201, 70},
+ { 200, 68},
+ { 199, 65},
+ { 198, 63},
+ { 197, 60},
+ { 196, 58},
+ { 195, 55},
+ { 194, 53},
+ { 193, 50},
+ { 192, 48},
+ { 191, 45},
+ { 190, 43},
+ { 189, 40},
+ { 188, 38},
+ { 187, 35},
+ { 186, 33},
+ { 185, 30},
+ { 184, 28},
+ { 183, 25},
+ { 182, 23},
+ { 181, 20},
+ { 180, 18},
+ { 179, 15},
+ { 178, 13},
+ { 177, 10},
+ { 176, 8},
+ { 175, 5},
+ { 0, 0},
+};
+
+/* MAX1111 Commands */
+#define MAXCTRL_PD0 1u << 0
+#define MAXCTRL_PD1 1u << 1
+#define MAXCTRL_SGL 1u << 2
+#define MAXCTRL_UNI 1u << 3
+#define MAXCTRL_SEL_SH 4
+#define MAXCTRL_STR 1u << 7
+
+/* MAX1111 Channel Definitions */
+#define BATT_AD 4u
+#define BATT_THM 2u
+#define JK_VAD 6u
+
+
+/*
+ * Prototypes
+ */
+static int sharpsl_read_MainBattery(void);
+static int sharpsl_off_charge_battery(void);
+static int sharpsl_check_battery(int mode);
+static int sharpsl_ac_check(void);
+static int sharpsl_fatal_check(void);
+static int sharpsl_average_value(int ad);
+static void sharpsl_average_clear(void);
+static void sharpsl_charge_toggle(void *private_);
+static void sharpsl_battery_thread(void *private_);
+
+
+/*
+ * Variables
+ */
+struct sharpsl_pm_status sharpsl_pm;
+DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL);
+DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL);
+
+
+static int get_percentage(int voltage)
+{
+ int i = sharpsl_pm.machinfo->bat_levels - 1;
+ struct battery_thresh *thresh;
+
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ thresh=sharpsl_pm.machinfo->bat_levels_acin;
+ else
+ thresh=sharpsl_pm.machinfo->bat_levels_noac;
+
+ while (i > 0 && (voltage > thresh[i].voltage))
+ i--;
+
+ return thresh[i].percentage;
+}
+
+static int get_apm_status(int voltage)
+{
+ int low_thresh, high_thresh;
+
+ if (sharpsl_pm.charge_mode == CHRG_ON) {
+ high_thresh = sharpsl_pm.machinfo->status_high_acin;
+ low_thresh = sharpsl_pm.machinfo->status_low_acin;
+ } else {
+ high_thresh = sharpsl_pm.machinfo->status_high_noac;
+ low_thresh = sharpsl_pm.machinfo->status_low_noac;
+ }
+
+ if (voltage >= high_thresh)
+ return APM_BATTERY_STATUS_HIGH;
+ if (voltage >= low_thresh)
+ return APM_BATTERY_STATUS_LOW;
+ return APM_BATTERY_STATUS_CRITICAL;
+}
+
+void sharpsl_battery_kick(void)
+{
+ schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
+}
+EXPORT_SYMBOL(sharpsl_battery_kick);
+
+
+static void sharpsl_battery_thread(void *private_)
+{
+ int voltage, percent, apm_status, i = 0;
+
+ if (!sharpsl_pm.machinfo)
+ return;
+
+ sharpsl_pm.battstat.ac_status = (!(STATUS_AC_IN) ? APM_AC_OFFLINE : APM_AC_ONLINE);
+
+ /* Corgi cannot confirm when battery fully charged so periodically kick! */
+ if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON)
+ && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
+ schedule_work(&toggle_charger);
+
+ while(1) {
+ voltage = sharpsl_read_MainBattery();
+ if (voltage > 0) break;
+ if (i++ > 5) {
+ voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+ dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+ break;
+ }
+ }
+
+ voltage = sharpsl_average_value(voltage);
+ apm_status = get_apm_status(voltage);
+ percent = get_percentage(voltage);
+
+ /* At low battery voltages, the voltage has a tendency to start
+ creeping back up so we try to avoid this here */
+ if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) {
+ sharpsl_pm.battstat.mainbat_voltage = voltage;
+ sharpsl_pm.battstat.mainbat_status = apm_status;
+ sharpsl_pm.battstat.mainbat_percent = percent;
+ }
+
+ dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage,
+ sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
+
+ /* If battery is low. limit backlight intensity to save power. */
+ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+ && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
+ (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+ if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
+ corgibl_limit_intensity(1);
+ sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
+ }
+ } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
+ corgibl_limit_intensity(0);
+ sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
+ }
+
+ /* Suspend if critical battery level */
+ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+ && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+ && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+ sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+ dev_err(sharpsl_pm.dev, "Fatal Off\n");
+ apm_queue_event(APM_CRITICAL_SUSPEND);
+ }
+
+ schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
+}
+
+static void sharpsl_charge_on(void)
+{
+ dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
+
+ sharpsl_pm.full_count = 0;
+ sharpsl_pm.charge_mode = CHRG_ON;
+ schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
+ schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
+}
+
+static void sharpsl_charge_off(void)
+{
+ dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
+
+ CHARGE_OFF();
+ CHARGE_LED_OFF();
+ sharpsl_pm.charge_mode = CHRG_OFF;
+
+ schedule_work(&sharpsl_bat);
+}
+
+static void sharpsl_charge_error(void)
+{
+ CHARGE_LED_ERR();
+ CHARGE_OFF();
+ sharpsl_pm.charge_mode = CHRG_ERROR;
+}
+
+static void sharpsl_charge_toggle(void *private_)
+{
+ dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+
+ if (STATUS_AC_IN == 0) {
+ sharpsl_charge_off();
+ return;
+ } else if ((sharpsl_check_battery(1) < 0) || (sharpsl_ac_check() < 0)) {
+ sharpsl_charge_error();
+ return;
+ }
+
+ CHARGE_LED_ON();
+ CHARGE_OFF();
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ CHARGE_ON();
+
+ sharpsl_pm.charge_start_time = jiffies;
+}
+
+static void sharpsl_ac_timer(unsigned long data)
+{
+ int acin = STATUS_AC_IN;
+
+ dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+
+ sharpsl_average_clear();
+ if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
+ sharpsl_charge_on();
+ else if (sharpsl_pm.charge_mode == CHRG_ON)
+ sharpsl_charge_off();
+
+ schedule_work(&sharpsl_bat);
+}
+
+
+static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp)
+{
+ /* Delay the event slightly to debounce */
+ /* Must be a smaller delay than the chrg_full_isr below */
+ mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+ return IRQ_HANDLED;
+}
+
+static void sharpsl_chrg_full_timer(unsigned long data)
+{
+ dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
+
+ sharpsl_pm.full_count++;
+
+ if (STATUS_AC_IN == 0) {
+ dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ sharpsl_charge_off();
+ } else if (sharpsl_pm.full_count < 2) {
+ dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
+ schedule_work(&toggle_charger);
+ } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
+ dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
+ schedule_work(&toggle_charger);
+ } else {
+ sharpsl_charge_off();
+ sharpsl_pm.charge_mode = CHRG_DONE;
+ dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
+ }
+}
+
+/* Charging Finished Interrupt (Not present on Corgi) */
+/* Can trigger at the same time as an AC staus change so
+ delay until after that has been processed */
+static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp)
+{
+ if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
+ return IRQ_HANDLED;
+
+ /* delay until after any ac interrupt */
+ mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp)
+{
+ int is_fatal = 0;
+
+ if (STATUS_BATT_LOCKED == 0) {
+ dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
+ is_fatal = 1;
+ }
+
+ if (sharpsl_pm.machinfo->gpio_fatal && (STATUS_FATAL == 0)) {
+ dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
+ is_fatal = 1;
+ }
+
+ if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
+ sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+ apm_queue_event(APM_CRITICAL_SUSPEND);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Maintain an average of the last 10 readings
+ */
+#define SHARPSL_CNV_VALUE_NUM 10
+static int sharpsl_ad_index;
+
+static void sharpsl_average_clear(void)
+{
+ sharpsl_ad_index = 0;
+}
+
+static int sharpsl_average_value(int ad)
+{
+ int i, ad_val = 0;
+ static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
+
+ if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
+ sharpsl_ad_index = 0;
+ return ad;
+ }
+
+ sharpsl_ad[sharpsl_ad_index] = ad;
+ sharpsl_ad_index++;
+ if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
+ for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+ sharpsl_ad[i] = sharpsl_ad[i+1];
+ sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
+ }
+ for (i=0; i < sharpsl_ad_index; i++)
+ ad_val += sharpsl_ad[i];
+
+ return (ad_val / sharpsl_ad_index);
+}
+
+
+/*
+ * Read MAX1111 ADC
+ */
+static int read_max1111(int channel)
+{
+ return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
+ | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
+}
+
+static int sharpsl_read_MainBattery(void)
+{
+ return read_max1111(BATT_AD);
+}
+
+static int sharpsl_read_Temp(void)
+{
+ int temp;
+
+ sharpsl_pm.machinfo->measure_temp(1);
+
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+ temp = read_max1111(BATT_THM);
+
+ sharpsl_pm.machinfo->measure_temp(0);
+
+ return temp;
+}
+
+static int sharpsl_read_jkvad(void)
+{
+ return read_max1111(JK_VAD);
+}
+
+/*
+ * Take an array of 5 integers, remove the maximum and minimum values
+ * and return the average.
+ */
+static int get_select_val(int *val)
+{
+ int i, j, k, temp, sum = 0;
+
+ /* Find MAX val */
+ temp = val[0];
+ j=0;
+ for (i=1; i<5; i++) {
+ if (temp < val[i]) {
+ temp = val[i];
+ j = i;
+ }
+ }
+
+ /* Find MIN val */
+ temp = val[4];
+ k=4;
+ for (i=3; i>=0; i--) {
+ if (temp > val[i]) {
+ temp = val[i];
+ k = i;
+ }
+ }
+
+ for (i=0; i<5; i++)
+ if (i != j && i != k )
+ sum += val[i];
+
+ dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
+
+ return (sum/3);
+}
+
+/* mode 0 - Check temperature and voltage
+ * 1 - Check temperature only */
+static int sharpsl_check_battery(int mode)
+{
+ int val, i, buff[5];
+
+ /* Check battery temperature */
+ for (i=0; i<5; i++) {
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+ buff[i] = sharpsl_read_Temp();
+ }
+
+ val = get_select_val(buff);
+
+ dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
+ if (val > SHARPSL_CHARGE_ON_TEMP)
+ return -1;
+ if (mode == 1)
+ return 0;
+
+ /* disable charge, enable discharge */
+ CHARGE_OFF();
+ DISCHARGE_ON();
+ mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(1);
+
+ /* Check battery voltage */
+ for (i=0; i<5; i++) {
+ buff[i] = sharpsl_read_MainBattery();
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+ }
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(0);
+
+ DISCHARGE_OFF();
+
+ val = get_select_val(buff);
+ dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
+
+ if (val < SHARPSL_CHARGE_ON_VOLT)
+ return -1;
+
+ return 0;
+}
+
+static int sharpsl_ac_check(void)
+{
+ int temp, i, buff[5];
+
+ for (i=0; i<5; i++) {
+ buff[i] = sharpsl_read_jkvad();
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_JKVAD);
+ }
+
+ temp = get_select_val(buff);
+ dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+
+ if ((temp > SHARPSL_CHARGE_ON_JKVAD_HIGH) || (temp < SHARPSL_CHARGE_ON_JKVAD_LOW)) {
+ dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_pm_suspend(struct device *dev, pm_message_t state)
+{
+ sharpsl_pm.flags |= SHARPSL_SUSPENDED;
+ flush_scheduled_work();
+
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+ else
+ sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+
+ return 0;
+}
+
+static int sharpsl_pm_resume(struct device *dev)
+{
+ /* Clear the reset source indicators as they break the bootloader upon reboot */
+ RCSR = 0x0f;
+ sharpsl_average_clear();
+ sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
+ sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
+
+ return 0;
+}
+
+static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+ dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+ /* not charging and AC-IN! */
+
+ if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (STATUS_AC_IN != 0)) {
+ dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
+ sharpsl_pm.charge_mode = CHRG_OFF;
+ sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+ sharpsl_off_charge_battery();
+ }
+
+ sharpsl_pm.machinfo->presuspend();
+
+ PEDR = 0xffffffff; /* clear it */
+
+ sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
+ if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
+ RTSR &= RTSR_ALE;
+ RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
+ dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+ sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
+ } else if (alarm_enable) {
+ RTSR &= RTSR_ALE;
+ RTAR = alarm_time;
+ dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+ } else {
+ dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
+ }
+
+ pxa_pm_enter(state);
+
+ sharpsl_pm.machinfo->postsuspend();
+
+ dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+}
+
+static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+ if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
+ {
+ if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
+ dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
+ corgi_goto_sleep(alarm_time, alarm_enable, state);
+ return 1;
+ }
+ if(sharpsl_off_charge_battery()) {
+ dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
+ corgi_goto_sleep(alarm_time, alarm_enable, state);
+ return 1;
+ }
+ dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
+ }
+
+ if ((STATUS_BATT_LOCKED == 0) || (sharpsl_fatal_check() < 0) )
+ {
+ dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
+ corgi_goto_sleep(alarm_time, alarm_enable, state);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int corgi_pxa_pm_enter(suspend_state_t state)
+{
+ unsigned long alarm_time = RTAR;
+ unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
+
+ dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
+
+ corgi_goto_sleep(alarm_time, alarm_status, state);
+
+ while (corgi_enter_suspend(alarm_time,alarm_status,state))
+ {}
+
+ dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
+
+ return 0;
+}
+#endif
+
+
+/*
+ * Check for fatal battery errors
+ * Fatal returns -1
+ */
+static int sharpsl_fatal_check(void)
+{
+ int buff[5], temp, i, acin;
+
+ dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
+
+ /* Check AC-Adapter */
+ acin = STATUS_AC_IN;
+
+ if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+ CHARGE_OFF();
+ udelay(100);
+ DISCHARGE_ON(); /* enable discharge */
+ mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+ }
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(1);
+
+ /* Check battery : check inserting battery ? */
+ for (i=0; i<5; i++) {
+ buff[i] = sharpsl_read_MainBattery();
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+ }
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(0);
+
+ if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+ udelay(100);
+ CHARGE_ON();
+ DISCHARGE_OFF();
+ }
+
+ temp = get_select_val(buff);
+ dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_read_MainBattery());
+
+ if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) ||
+ (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT)))
+ return -1;
+ return 0;
+}
+
+static int sharpsl_off_charge_error(void)
+{
+ dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n");
+ CHARGE_OFF();
+ CHARGE_LED_ERR();
+ sharpsl_pm.charge_mode = CHRG_ERROR;
+ return 1;
+}
+
+/*
+ * Charging Control while suspended
+ * Return 1 - go straight to sleep
+ * Return 0 - sleep or wakeup depending on other factors
+ */
+static int sharpsl_off_charge_battery(void)
+{
+ int time;
+
+ dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
+
+ if (sharpsl_pm.charge_mode == CHRG_OFF) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
+
+ /* AC Check */
+ if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery(1) < 0))
+ return sharpsl_off_charge_error();
+
+ /* Start Charging */
+ CHARGE_LED_ON();
+ CHARGE_OFF();
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ CHARGE_ON();
+
+ sharpsl_pm.charge_mode = CHRG_ON;
+ sharpsl_pm.full_count = 0;
+
+ return 1;
+ } else if (sharpsl_pm.charge_mode != CHRG_ON) {
+ return 1;
+ }
+
+ if (sharpsl_pm.full_count == 0) {
+ int time;
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
+
+ if (sharpsl_check_battery(0) < 0)
+ return sharpsl_off_charge_error();
+
+ CHARGE_OFF();
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ CHARGE_ON();
+ sharpsl_pm.charge_mode = CHRG_ON;
+
+ mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+ time = RCNR;
+ while(1) {
+ /* Check if any wakeup event had occured */
+ if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+ return 0;
+ /* Check for timeout */
+ if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
+ return 1;
+ if (STATUS_CHRG_FULL) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n");
+ sharpsl_pm.full_count++;
+ CHARGE_OFF();
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ CHARGE_ON();
+ return 1;
+ }
+ }
+ }
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
+
+ mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+ time = RCNR;
+ while(1) {
+ /* Check if any wakeup event had occured */
+ if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+ return 0;
+ /* Check for timeout */
+ if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
+ if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
+ sharpsl_pm.full_count = 0;
+ }
+ sharpsl_pm.full_count++;
+ return 1;
+ }
+ if (STATUS_CHRG_FULL) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
+ CHARGE_LED_OFF();
+ CHARGE_OFF();
+ sharpsl_pm.charge_mode = CHRG_DONE;
+ return 1;
+ }
+ }
+}
+
+
+static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+}
+
+static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+}
+
+static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
+static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
+
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+static void sharpsl_apm_get_power_status(struct apm_power_info *info)
+{
+ info->ac_line_status = sharpsl_pm.battstat.ac_status;
+
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ info->battery_status = APM_BATTERY_STATUS_CHARGING;
+ else
+ info->battery_status = sharpsl_pm.battstat.mainbat_status;
+
+ info->battery_flag = (1 << info->battery_status);
+ info->battery_life = sharpsl_pm.battstat.mainbat_percent;
+}
+
+static struct pm_ops sharpsl_pm_ops = {
+ .pm_disk_mode = PM_DISK_FIRMWARE,
+ .prepare = pxa_pm_prepare,
+ .enter = corgi_pxa_pm_enter,
+ .finish = pxa_pm_finish,
+};
+
+static int __init sharpsl_pm_probe(struct device *dev)
+{
+ if (!dev->platform_data)
+ return -EINVAL;
+
+ sharpsl_pm.dev = dev;
+ sharpsl_pm.machinfo = dev->platform_data;
+ sharpsl_pm.charge_mode = CHRG_OFF;
+ sharpsl_pm.flags = 0;
+
+ sharpsl_pm.machinfo->init();
+
+ init_timer(&sharpsl_pm.ac_timer);
+ sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
+
+ init_timer(&sharpsl_pm.chrg_full_timer);
+ sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+
+ pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
+ pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN);
+ pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
+
+ /* Register interrupt handlers */
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, SA_INTERRUPT, "AC Input Detect", sharpsl_ac_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
+ }
+ else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
+
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, SA_INTERRUPT, "Battery Cover", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
+ }
+ else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
+
+ if (sharpsl_pm.machinfo->gpio_fatal) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, SA_INTERRUPT, "Fatal Battery", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
+ }
+ else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
+ }
+
+ if (!machine_is_corgi())
+ {
+ /* Register interrupt handler. */
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, SA_INTERRUPT, "CO", sharpsl_chrg_full_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
+ }
+ else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
+ }
+
+ device_create_file(dev, &dev_attr_battery_percentage);
+ device_create_file(dev, &dev_attr_battery_voltage);
+
+ apm_get_power_status = sharpsl_apm_get_power_status;
+
+ pm_set_ops(&sharpsl_pm_ops);
+
+ mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+ return 0;
+}
+
+static int sharpsl_pm_remove(struct device *dev)
+{
+ pm_set_ops(NULL);
+
+ device_remove_file(dev, &dev_attr_battery_percentage);
+ device_remove_file(dev, &dev_attr_battery_voltage);
+
+ free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
+ free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
+
+ if (sharpsl_pm.machinfo->gpio_fatal)
+ free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
+
+ if (!machine_is_corgi())
+ free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+
+ del_timer_sync(&sharpsl_pm.chrg_full_timer);
+ del_timer_sync(&sharpsl_pm.ac_timer);
+
+ return 0;
+}
+
+static struct device_driver sharpsl_pm_driver = {
+ .name = "sharpsl-pm",
+ .bus = &platform_bus_type,
+ .probe = sharpsl_pm_probe,
+ .remove = sharpsl_pm_remove,
+ .suspend = sharpsl_pm_suspend,
+ .resume = sharpsl_pm_resume,
+};
+
+static int __devinit sharpsl_pm_init(void)
+{
+ return driver_register(&sharpsl_pm_driver);
+}
+
+static void sharpsl_pm_exit(void)
+{
+ driver_unregister(&sharpsl_pm_driver);
+}
+
+late_initcall(sharpsl_pm_init);
+module_exit(sharpsl_pm_exit);