summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorIgor Grinberg <grinberg@compulab.co.il>2011-05-03 18:22:09 +0300
committerTony Lindgren <tony@atomide.com>2011-05-12 02:52:06 -0700
commitbc593f5d787d0a015539e21868302fb44a47c3e3 (patch)
tree75feac78712ae08e38b678c0dae62cb75765ddb0 /arch/arm
parent9e18630b689d658d65bf59508bfec084f61ff5c6 (diff)
arm: omap2plus: GPIO cleanup
use gpio_request_<one|array>() instead of multiple gpiolib calls, remove unneeded variables, etc. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-omap2/board-2430sdp.c7
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c47
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c98
-rw-r--r--arch/arm/mach-omap2/board-am3517crane.c10
-rw-r--r--arch/arm/mach-omap2/board-am3517evm.c54
-rw-r--r--arch/arm/mach-omap2/board-apollon.c29
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c74
-rw-r--r--arch/arm/mach-omap2/board-cm-t3517.c9
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c12
-rw-r--r--arch/arm/mach-omap2/board-igep0020.c143
-rw-r--r--arch/arm/mach-omap2/board-igep0030.c93
-rw-r--r--arch/arm/mach-omap2/board-n8x0.c28
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c128
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c99
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c21
-rw-r--r--arch/arm/mach-omap2/board-omap3stalker.c7
-rw-r--r--arch/arm/mach-omap2/board-omap3touchbook.c20
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c62
-rw-r--r--arch/arm/mach-omap2/board-overo.c55
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c29
-rw-r--r--arch/arm/mach-omap2/board-rx51-video.c5
-rw-r--r--arch/arm/mach-omap2/board-zoom-debugboard.c9
-rw-r--r--arch/arm/mach-omap2/board-zoom-display.c31
-rw-r--r--arch/arm/mach-omap2/board-zoom-peripherals.c8
-rw-r--r--arch/arm/mach-omap2/gpmc-smc91x.c11
-rw-r--r--arch/arm/mach-omap2/gpmc-smsc911x.c7
-rw-r--r--arch/arm/mach-omap2/usb-tusb6010.c3
27 files changed, 398 insertions, 701 deletions
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index a8810f83a57..d54969be0a5 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -226,8 +226,6 @@ static struct omap_board_mux board_mux[] __initdata = {
static void __init omap_2430sdp_init(void)
{
- int ret;
-
omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
omap_board_config = sdp2430_config;
@@ -246,9 +244,8 @@ static void __init omap_2430sdp_init(void)
board_smc91x_init();
/* Turn off secondary LCD backlight */
- ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
- if (ret == 0)
- gpio_direction_output(SECONDARY_LCD_GPIO, 0);
+ gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
+ "Secondary LCD backlight");
}
static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 951e5857ad3..99218a5299c 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -126,8 +126,11 @@ static struct twl4030_keypad_data sdp3430_kp_data = {
#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8
#define SDP3430_LCD_PANEL_ENABLE_GPIO 5
-static unsigned backlight_gpio;
-static unsigned enable_gpio;
+static struct gpio sdp3430_dss_gpios[] __initdata = {
+ {SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" },
+ {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"},
+};
+
static int lcd_enabled;
static int dvi_enabled;
@@ -135,29 +138,11 @@ static void __init sdp3430_display_init(void)
{
int r;
- enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO;
- backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
-
- r = gpio_request(enable_gpio, "LCD reset");
- if (r) {
- printk(KERN_ERR "failed to get LCD reset GPIO\n");
- goto err0;
- }
-
- r = gpio_request(backlight_gpio, "LCD Backlight");
- if (r) {
- printk(KERN_ERR "failed to get LCD backlight GPIO\n");
- goto err1;
- }
-
- gpio_direction_output(enable_gpio, 0);
- gpio_direction_output(backlight_gpio, 0);
+ r = gpio_request_array(sdp3430_dss_gpios,
+ ARRAY_SIZE(sdp3430_dss_gpios));
+ if (r)
+ printk(KERN_ERR "failed to get LCD control GPIOs\n");
- return;
-err1:
- gpio_free(enable_gpio);
-err0:
- return;
}
static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
@@ -167,8 +152,8 @@ static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
return -EINVAL;
}
- gpio_direction_output(enable_gpio, 1);
- gpio_direction_output(backlight_gpio, 1);
+ gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1);
+ gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1);
lcd_enabled = 1;
@@ -179,8 +164,8 @@ static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
{
lcd_enabled = 0;
- gpio_direction_output(enable_gpio, 0);
- gpio_direction_output(backlight_gpio, 0);
+ gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0);
+ gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0);
}
static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
@@ -308,12 +293,10 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
omap2_hsmmc_init(mmc);
/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
- gpio_request(gpio + 7, "sub_lcd_en_bkl");
- gpio_direction_output(gpio + 7, 0);
+ gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
/* gpio + 15 is "sub_lcd_nRST" (output) */
- gpio_request(gpio + 15, "sub_lcd_nRST");
- gpio_direction_output(gpio + 15, 0);
+ gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST");
return 0;
}
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 707354222d4..ae3153c5396 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -252,58 +252,22 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
},
};
+static struct gpio sdp4430_eth_gpios[] __initdata = {
+ { ETH_KS8851_POWER_ON, GPIOF_OUT_INIT_HIGH, "eth_power" },
+ { ETH_KS8851_QUART, GPIOF_OUT_INIT_HIGH, "quart" },
+ { ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" },
+};
+
static int omap_ethernet_init(void)
{
int status;
/* Request of GPIO lines */
+ status = gpio_request_array(sdp4430_eth_gpios,
+ ARRAY_SIZE(sdp4430_eth_gpios));
+ if (status)
+ pr_err("Cannot request ETH GPIOs\n");
- status = gpio_request(ETH_KS8851_POWER_ON, "eth_power");
- if (status) {
- pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON);
- return status;
- }
-
- status = gpio_request(ETH_KS8851_QUART, "quart");
- if (status) {
- pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART);
- goto error1;
- }
-
- status = gpio_request(ETH_KS8851_IRQ, "eth_irq");
- if (status) {
- pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ);
- goto error2;
- }
-
- /* Configuration of requested GPIO lines */
-
- status = gpio_direction_output(ETH_KS8851_POWER_ON, 1);
- if (status) {
- pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ);
- goto error3;
- }
-
- status = gpio_direction_output(ETH_KS8851_QUART, 1);
- if (status) {
- pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART);
- goto error3;
- }
-
- status = gpio_direction_input(ETH_KS8851_IRQ);
- if (status) {
- pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ);
- goto error3;
- }
-
- return 0;
-
-error3:
- gpio_free(ETH_KS8851_IRQ);
-error2:
- gpio_free(ETH_KS8851_QUART);
-error1:
- gpio_free(ETH_KS8851_POWER_ON);
return status;
}
@@ -602,21 +566,13 @@ static int __init omap4_i2c_init(void)
static void __init omap_sfh7741prox_init(void)
{
- int error;
+ int error;
- error = gpio_request(OMAP4_SFH7741_ENABLE_GPIO, "sfh7741");
- if (error < 0) {
+ error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO,
+ GPIOF_OUT_INIT_LOW, "sfh7741");
+ if (error < 0)
pr_err("%s:failed to request GPIO %d, error %d\n",
__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
- return;
- }
-
- error = gpio_direction_output(OMAP4_SFH7741_ENABLE_GPIO , 0);
- if (error < 0) {
- pr_err("%s: GPIO configuration failed: GPIO %d,error %d\n",
- __func__, OMAP4_SFH7741_ENABLE_GPIO, error);
- gpio_free(OMAP4_SFH7741_ENABLE_GPIO);
- }
}
static void sdp4430_hdmi_mux_init(void)
@@ -633,27 +589,19 @@ static void sdp4430_hdmi_mux_init(void)
OMAP_PIN_INPUT_PULLUP);
}
+static struct gpio sdp4430_hdmi_gpios[] = {
+ { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
+ { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+};
+
static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
{
int status;
- status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH,
- "hdmi_gpio_hpd");
- if (status) {
- pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD);
- return status;
- }
- status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH,
- "hdmi_gpio_ls_oe");
- if (status) {
- pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE);
- goto error1;
- }
-
- return 0;
-
-error1:
- gpio_free(HDMI_GPIO_HPD);
+ status = gpio_request_array(sdp4430_hdmi_gpios,
+ ARRAY_SIZE(sdp4430_hdmi_gpios));
+ if (status)
+ pr_err("%s: Cannot request HDMI GPIOs\n", __func__);
return status;
}
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index a890d244fec..5e438a77cd7 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -89,19 +89,13 @@ static void __init am3517_crane_init(void)
return;
}
- ret = gpio_request(GPIO_USB_POWER, "usb_ehci_enable");
+ ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
+ "usb_ehci_enable");
if (ret < 0) {
pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
return;
}
- ret = gpio_direction_output(GPIO_USB_POWER, 1);
- if (ret < 0) {
- gpio_free(GPIO_USB_POWER);
- pr_err("Unable to initialize EHCI power\n");
- return;
- }
-
usbhs_init(&usbhs_bdata);
}
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index ce7d5e6e415..6c470603880 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -174,19 +174,14 @@ static void __init am3517_evm_rtc_init(void)
int r;
omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP);
- r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq");
+
+ r = gpio_request_one(GPIO_RTCS35390A_IRQ, GPIOF_IN, "rtcs35390a-irq");
if (r < 0) {
printk(KERN_WARNING "failed to request GPIO#%d\n",
GPIO_RTCS35390A_IRQ);
return;
}
- r = gpio_direction_input(GPIO_RTCS35390A_IRQ);
- if (r < 0) {
- printk(KERN_WARNING "GPIO#%d cannot be configured as input\n",
- GPIO_RTCS35390A_IRQ);
- gpio_free(GPIO_RTCS35390A_IRQ);
- return;
- }
+
am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
}
@@ -242,6 +237,15 @@ static int dvi_enabled;
#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
+static struct gpio am3517_evm_dss_gpios[] __initdata = {
+ /* GPIO 182 = LCD Backlight Power */
+ { LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" },
+ /* GPIO 181 = LCD Panel PWM */
+ { LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd bl enable" },
+ /* GPIO 176 = LCD Panel Power enable pin */
+ { LCD_PANEL_PWR, GPIOF_OUT_INIT_HIGH, "dvi enable" },
+};
+
static void __init am3517_evm_display_init(void)
{
int r;
@@ -249,41 +253,15 @@ static void __init am3517_evm_display_init(void)
omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP);
omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN);
- /*
- * Enable GPIO 182 = LCD Backlight Power
- */
- r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr");
+
+ r = gpio_request_array(am3517_evm_dss_gpios,
+ ARRAY_SIZE(am3517_evm_dss_gpios));
if (r) {
- printk(KERN_ERR "failed to get lcd_backlight_pwr\n");
+ printk(KERN_ERR "failed to get DSS panel control GPIOs\n");
return;
}
- gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1);
- /*
- * Enable GPIO 181 = LCD Panel PWM
- */
- r = gpio_request(LCD_PANEL_PWM, "lcd_pwm");
- if (r) {
- printk(KERN_ERR "failed to get lcd_pwm\n");
- goto err_1;
- }
- gpio_direction_output(LCD_PANEL_PWM, 1);
- /*
- * Enable GPIO 176 = LCD Panel Power enable pin
- */
- r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr");
- if (r) {
- printk(KERN_ERR "failed to get lcd_panel_pwr\n");
- goto err_2;
- }
- gpio_direction_output(LCD_PANEL_PWR, 1);
printk(KERN_INFO "Display initialized successfully\n");
- return;
-
-err_2:
- gpio_free(LCD_PANEL_PWM);
-err_1:
- gpio_free(LCD_PANEL_BKLIGHT_PWR);
}
#else
static void __init am3517_evm_display_init(void) {}
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index f4f8374a029..f3beb8eeef7 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -202,6 +202,7 @@ static inline void __init apollon_init_smc91x(void)
unsigned int rate;
struct clk *gpmc_fck;
int eth_cs;
+ int err;
gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
if (IS_ERR(gpmc_fck)) {
@@ -245,15 +246,13 @@ static inline void __init apollon_init_smc91x(void)
apollon_smc91x_resources[0].end = base + 0x30f;
udelay(100);
- omap_mux_init_gpio(74, 0);
- if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
+ omap_mux_init_gpio(APOLLON_ETHR_GPIO_IRQ, 0);
+ err = gpio_request_one(APOLLON_ETHR_GPIO_IRQ, GPIOF_IN, "SMC91x irq");
+ if (err) {
printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
APOLLON_ETHR_GPIO_IRQ);
gpmc_cs_free(APOLLON_ETH_CS);
- goto out;
}
- gpio_direction_input(APOLLON_ETHR_GPIO_IRQ);
-
out:
clk_disable(gpmc_fck);
clk_put(gpmc_fck);
@@ -280,20 +279,19 @@ static void __init omap_apollon_init_early(void)
omap2_init_common_devices(NULL, NULL);
}
+static struct gpio apollon_gpio_leds[] __initdata = {
+ { LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */
+ { LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */
+ { LED2_GPIO15, GPIOF_OUT_INIT_LOW, "LED2" }, /* LED2 - AA4 */
+};
+
static void __init apollon_led_init(void)
{
- /* LED0 - AA10 */
omap_mux_init_signal("vlynq_clk.gpio_13", 0);
- gpio_request(LED0_GPIO13, "LED0");
- gpio_direction_output(LED0_GPIO13, 0);
- /* LED1 - AA6 */
omap_mux_init_signal("vlynq_rx1.gpio_14", 0);
- gpio_request(LED1_GPIO14, "LED1");
- gpio_direction_output(LED1_GPIO14, 0);
- /* LED2 - AA4 */
omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
- gpio_request(LED2_GPIO15, "LED2");
- gpio_direction_output(LED2_GPIO15, 0);
+
+ gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds));
}
static void __init apollon_usb_init(void)
@@ -301,8 +299,7 @@ static void __init apollon_usb_init(void)
/* USB device */
/* DEVICE_SUSPEND */
omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
- gpio_request(12, "USB suspend");
- gpio_direction_output(12, 0);
+ gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend");
omap2_usbfs_init(&apollon_usb_config);
}
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e0e2d483800..6063be82b56 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -182,10 +182,6 @@ static inline void cm_t35_init_nand(void) {}
#define CM_T35_LCD_BL_GPIO 58
#define CM_T35_DVI_EN_GPIO 54
-static int lcd_bl_gpio;
-static int lcd_en_gpio;
-static int dvi_en_gpio;
-
static int lcd_enabled;
static int dvi_enabled;
@@ -196,8 +192,8 @@ static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev)
return -EINVAL;
}
- gpio_set_value(lcd_en_gpio, 1);
- gpio_set_value(lcd_bl_gpio, 1);
+ gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
+ gpio_set_value(CM_T35_LCD_BL_GPIO, 1);
lcd_enabled = 1;
@@ -208,8 +204,8 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
{
lcd_enabled = 0;
- gpio_set_value(lcd_bl_gpio, 0);
- gpio_set_value(lcd_en_gpio, 0);
+ gpio_set_value(CM_T35_LCD_BL_GPIO, 0);
+ gpio_set_value(CM_T35_LCD_EN_GPIO, 0);
}
static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev)
@@ -219,7 +215,7 @@ static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev)
return -EINVAL;
}
- gpio_set_value(dvi_en_gpio, 0);
+ gpio_set_value(CM_T35_DVI_EN_GPIO, 0);
dvi_enabled = 1;
return 0;
@@ -227,7 +223,7 @@ static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev)
static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev)
{
- gpio_set_value(dvi_en_gpio, 1);
+ gpio_set_value(CM_T35_DVI_EN_GPIO, 1);
dvi_enabled = 0;
}
@@ -309,62 +305,38 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
},
};
+static struct gpio cm_t35_dss_gpios[] __initdata = {
+ { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" },
+ { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" },
+ { CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable" },
+};
+
static void __init cm_t35_init_display(void)
{
int err;
- lcd_en_gpio = CM_T35_LCD_EN_GPIO;
- lcd_bl_gpio = CM_T35_LCD_BL_GPIO;
- dvi_en_gpio = CM_T35_DVI_EN_GPIO;
-
spi_register_board_info(cm_t35_lcd_spi_board_info,
ARRAY_SIZE(cm_t35_lcd_spi_board_info));
- err = gpio_request(lcd_en_gpio, "LCD RST");
- if (err) {
- pr_err("CM-T35: failed to get LCD reset GPIO\n");
- goto out;
- }
-
- err = gpio_request(lcd_bl_gpio, "LCD BL");
+ err = gpio_request_array(cm_t35_dss_gpios,
+ ARRAY_SIZE(cm_t35_dss_gpios));
if (err) {
- pr_err("CM-T35: failed to get LCD backlight control GPIO\n");
- goto err_lcd_bl;
+ pr_err("CM-T35: failed to request DSS control GPIOs\n");
+ return;
}
- err = gpio_request(dvi_en_gpio, "DVI EN");
- if (err) {
- pr_err("CM-T35: failed to get DVI reset GPIO\n");
- goto err_dvi_en;
- }
-
- gpio_export(lcd_en_gpio, 0);
- gpio_export(lcd_bl_gpio, 0);
- gpio_export(dvi_en_gpio, 0);
- gpio_direction_output(lcd_en_gpio, 0);
- gpio_direction_output(lcd_bl_gpio, 0);
- gpio_direction_output(dvi_en_gpio, 1);
+ gpio_export(CM_T35_LCD_EN_GPIO, 0);
+ gpio_export(CM_T35_LCD_BL_GPIO, 0);
+ gpio_export(CM_T35_DVI_EN_GPIO, 0);
msleep(50);
- gpio_set_value(lcd_en_gpio, 1);
+ gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
err = omap_display_init(&cm_t35_dss_data);
if (err) {
pr_err("CM-T35: failed to register DSS device\n");
- goto err_dev_reg;
+ gpio_free_array(cm_t35_dss_gpios, ARRAY_SIZE(cm_t35_dss_gpios));
}
-
- return;
-
-err_dev_reg:
- gpio_free(dvi_en_gpio);
-err_dvi_en:
- gpio_free(lcd_bl_gpio);
-err_lcd_bl:
- gpio_free(lcd_en_gpio);
-out:
-
- return;
}
static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
@@ -497,10 +469,8 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
{
int wlan_rst = gpio + 2;
- if ((gpio_request(wlan_rst, "WLAN RST") == 0) &&
- (gpio_direction_output(wlan_rst, 1) == 0)) {
+ if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) {
gpio_export(wlan_rst, 0);
-
udelay(10);
gpio_set_value(wlan_rst, 0);
udelay(10);
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index a27e3eee829..08f08e81249 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -148,14 +148,13 @@ static void __init cm_t3517_init_rtc(void)
{
int err;
- err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en");
+ err = gpio_request_one(RTC_CS_EN_GPIO, GPIOF_OUT_INIT_HIGH,
+ "rtc cs en");
if (err) {
pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err);
return;
}
- gpio_direction_output(RTC_CS_EN_GPIO, 1);
-
platform_device_register(&cm_t3517_rtc_device);
}
#else
@@ -182,11 +181,11 @@ static int cm_t3517_init_usbh(void)
{
int err;
- err = gpio_request(USB_HUB_RESET_GPIO, "usb hub rst");
+ err = gpio_request_one(USB_HUB_RESET_GPIO, GPIOF_OUT_INIT_LOW,
+ "usb hub rst");
if (err) {
pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err);
} else {
- gpio_direction_output(USB_HUB_RESET_GPIO, 0);
udelay(10);
gpio_set_value(USB_HUB_RESET_GPIO, 1);
msleep(1);
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 405542af6ca..3bd344a527e 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -242,7 +242,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
- GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN");
+ GPIOF_OUT_INIT_LOW, "LCD_PWREN");
if (ret < 0) {
devkit8000_lcd_device.reset_gpio = -EINVAL;
printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
@@ -251,7 +251,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
/* gpio + 7 is "DVI_PD" (out, active low) */
devkit8000_dvi_device.reset_gpio = gpio + 7;
ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
- GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown");
+ GPIOF_OUT_INIT_LOW, "DVI PowerDown");
if (ret < 0) {
devkit8000_dvi_device.reset_gpio = -EINVAL;
printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
@@ -483,14 +483,14 @@ static void __init omap_dm9000_init(void)
{
unsigned char *eth_addr = omap_dm9000_platdata.dev_addr;
struct omap_die_id odi;
+ int ret;
- if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) {
+ ret = gpio_request_one(OMAP_DM9000_GPIO_IRQ, GPIOF_IN, "dm9000 irq");
+ if (ret < 0) {
printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
OMAP_DM9000_GPIO_IRQ);
return;
- }
-
- gpio_direction_input(OMAP_DM9000_GPIO_IRQ);
+ }
/* init the mac address using DIE id */
omap_get_die_id(&odi);
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 2c9a9197d2b..c62c297e0a3 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -78,22 +78,22 @@ static void __init igep2_get_revision(void)
omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT);
- if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_HW0_REV") == 0) &&
- (gpio_direction_input(IGEP2_GPIO_LED1_RED) == 0)) {
- ret = gpio_get_value(IGEP2_GPIO_LED1_RED);
- if (ret == 0) {
- pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n");
- hwrev = IGEP2_BOARD_HWREV_C;
- } else if (ret == 1) {
- pr_info("IGEP2: Hardware Revision B/C (B compatible)\n");
- hwrev = IGEP2_BOARD_HWREV_B;
- } else {
- pr_err("IGEP2: Unknown Hardware Revision\n");
- hwrev = -1;
- }
- } else {
+ if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) {
pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n");
pr_err("IGEP2: Unknown Hardware Revision\n");
+ return;
+ }
+
+ ret = gpio_get_value(IGEP2_GPIO_LED1_RED);
+ if (ret == 0) {
+ pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n");
+ hwrev = IGEP2_BOARD_HWREV_C;
+ } else if (ret == 1) {
+ pr_info("IGEP2: Hardware Revision B/C (B compatible)\n");
+ hwrev = IGEP2_BOARD_HWREV_B;
+ } else {
+ pr_err("IGEP2: Unknown Hardware Revision\n");
+ hwrev = -1;
}
gpio_free(IGEP2_GPIO_LED1_RED);
@@ -339,32 +339,35 @@ static void __init igep2_leds_init(void)
}
#else
+static struct gpio igep2_gpio_leds[] __initdata = {
+ { IGEP2_GPIO_LED0_RED, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" },
+ { IGEP2_GPIO_LED0_GREEN, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" },
+ { IGEP2_GPIO_LED1_RED, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" },
+};
+
static inline void igep2_leds_init(void)
{
- if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) &&
- (gpio_direction_output(IGEP2_GPIO_LED0_RED, 0) == 0))
- gpio_export(IGEP2_GPIO_LED0_RED, 0);
- else
- pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
-
- if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) &&
- (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 0) == 0))
- gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
- else
- pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
-
- if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) &&
- (gpio_direction_output(IGEP2_GPIO_LED1_RED, 0) == 0))
- gpio_export(IGEP2_GPIO_LED1_RED, 0);
- else
- pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
+ if (gpio_request_array(igep2_gpio_leds, ARRAY_SIZE(igep2_gpio_leds))) {
+ pr_warning("IGEP v2: Could not obtain leds gpios\n");
+ return;
+ }
+ gpio_export(IGEP2_GPIO_LED0_RED, 0);
+ gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
+ gpio_export(IGEP2_GPIO_LED1_RED, 0);
}
#endif
+static struct gpio igep2_twl_gpios[] = {
+ { -EINVAL, GPIOF_IN, "GPIO_EHCI_NOC" },
+ { -EINVAL, GPIOF_OUT_INIT_LOW, "GPIO_USBH_CPEN" },
+};
+
static int igep2_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
+ int ret;
+
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
@@ -373,22 +376,20 @@ static int igep2_twl_gpio_setup(struct device *dev,
* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
- if ((gpio_request(gpio + 1, "GPIO_EHCI_NOC") < 0) ||
- (gpio_direction_input(gpio + 1) < 0))
- pr_err("IGEP2: Could not obtain gpio for EHCI NOC");
+ igep2_twl_gpios[0].gpio = gpio + 1;
- /*
- * TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN
- * (out, active low)
- */
- if ((gpio_request(gpio + TWL4030_GPIO_MAX, "GPIO_USBH_CPEN") < 0) ||
- (gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0) < 0))
+ /* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */
+ igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX;
+
+ ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios));
+ if (ret < 0)
pr_err("IGEP2: Could not obtain gpio for USBH_CPEN");
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
- if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)
- && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0))
+ ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH,
+ "gpio-led:green:d1");
+ if (ret == 0)
gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
else
pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n");
@@ -469,8 +470,9 @@ static struct regulator_init_data igep2_vpll2 = {
static void __init igep2_display_init(void)
{
- if (gpio_request(IGEP2_GPIO_DVI_PUP, "GPIO_DVI_PUP") &&
- gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1))
+ int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
+ "GPIO_DVI_PUP");
+ if (err)
pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
}
@@ -577,44 +579,43 @@ static struct omap_board_mux board_mux[] __initdata = {
#endif
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
+static struct gpio igep2_wlan_bt_gpios[] __initdata = {
+ { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" },
+ { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" },
+ { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" },
+};
static void __init igep2_wlan_bt_init(void)
{
- unsigned npd, wreset, btreset;
+ int err;
/* GPIO's for WLAN-BT combo depends on hardware revision */
if (hwrev == IGEP2_BOARD_HWREV_B) {
- npd = IGEP2_RB_GPIO_WIFI_NPD;
- wreset = IGEP2_RB_GPIO_WIFI_NRESET;
- btreset = IGEP2_RB_GPIO_BT_NRESET;
+ igep2_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD;
+ igep2_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET;
+ igep2_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET;
} else if (hwrev == IGEP2_BOARD_HWREV_C) {
- npd = IGEP2_RC_GPIO_WIFI_NPD;
- wreset = IGEP2_RC_GPIO_WIFI_NRESET;
- btreset = IGEP2_RC_GPIO_BT_NRESET;
+ igep2_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD;
+ igep2_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET;
+ igep2_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET;
} else
return;
- /* Set GPIO's for WLAN-BT combo module */
- if ((gpio_request(npd, "GPIO_WIFI_NPD") == 0) &&
- (gpio_direction_output(npd, 1) == 0)) {
- gpio_export(npd, 0);
- } else
- pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NPD\n");
-
- if ((gpio_request(wreset, "GPIO_WIFI_NRESET") == 0) &&
- (gpio_direction_output(wreset, 1) == 0)) {
- gpio_export(wreset, 0);
- gpio_set_value(wreset, 0);
- udelay(10);
- gpio_set_value(wreset, 1);
- } else
- pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NRESET\n");
+ err = gpio_request_array(igep2_wlan_bt_gpios,
+ ARRAY_SIZE(igep2_wlan_bt_gpios));
+ if (err) {
+ pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n");
+ return;
+ }
+
+ gpio_export(igep2_wlan_bt_gpios[0].gpio, 0);
+ gpio_export(igep2_wlan_bt_gpios[1].gpio, 0);
+ gpio_export(igep2_wlan_bt_gpios[2].gpio, 0);
+
+ gpio_set_value(igep2_wlan_bt_gpios[1].gpio, 0);
+ udelay(10);
+ gpio_set_value(igep2_wlan_bt_gpios[1].gpio, 1);
- if ((gpio_request(btreset, "GPIO_BT_NRESET") == 0) &&
- (gpio_direction_output(btreset, 1) == 0)) {
- gpio_export(btreset, 0);
- } else
- pr_warning("IGEP2: Could not obtain gpio GPIO_BT_NRESET\n");
}
#else
static inline void __init igep2_wlan_bt_init(void) { }
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index 512a7eb9c2d..83f6be2a0de 100644
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -269,49 +269,43 @@ static void __init igep3_leds_init(void)
}
#else
+static struct gpio igep3_gpio_leds[] __initdata = {
+ { IGEP3_GPIO_LED0_RED, GPIOF_OUT_INIT_HIGH, "gpio-led:red:d0" },
+ { IGEP3_GPIO_LED0_GREEN, GPIOF_OUT_INIT_HIGH, "gpio-led:green:d0" },
+ { IGEP3_GPIO_LED1_RED, GPIOF_OUT_INIT_HIGH, "gpio-led:red:d1" },
+};
+
static inline void igep3_leds_init(void)
{
- if ((gpio_request(IGEP3_GPIO_LED0_RED, "gpio-led:red:d0") == 0) &&
- (gpio_direction_output(IGEP3_GPIO_LED0_RED, 1) == 0)) {
- gpio_export(IGEP3_GPIO_LED0_RED, 0);
- gpio_set_value(IGEP3_GPIO_LED0_RED, 1);
- } else
- pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_RED\n");
-
- if ((gpio_request(IGEP3_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) &&
- (gpio_direction_output(IGEP3_GPIO_LED0_GREEN, 1) == 0)) {
- gpio_export(IGEP3_GPIO_LED0_GREEN, 0);
- gpio_set_value(IGEP3_GPIO_LED0_GREEN, 1);
- } else
- pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_GREEN\n");
-
- if ((gpio_request(IGEP3_GPIO_LED1_RED, "gpio-led:red:d1") == 0) &&
- (gpio_direction_output(IGEP3_GPIO_LED1_RED, 1) == 0)) {
- gpio_export(IGEP3_GPIO_LED1_RED, 0);
- gpio_set_value(IGEP3_GPIO_LED1_RED, 1);
- } else
- pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_RED\n");
+ if (gpio_request_array(igep3_gpio_leds, ARRAY_SIZE(igep3_gpio_leds))) {
+ pr_warning("IGEP3: Could not obtain leds gpios\n");
+ return;
+ }
+ gpio_export(IGEP3_GPIO_LED0_RED, 0);
+ gpio_export(IGEP3_GPIO_LED0_GREEN, 0);
+ gpio_export(IGEP3_GPIO_LED1_RED, 0);
}
#endif
static int igep3_twl4030_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
+ int ret;
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
- if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)
- && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) {
- gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
- gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0);
- } else
+ ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH,
+ "gpio-led:green:d1");
+ if (ret)
pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_GREEN\n");
+ else
+ gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
#else
igep3_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
#endif
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ mmc[0].gpio_cd = gpio + 0;
+ omap2_hsmmc_init(mmc);
return 0;
};
@@ -358,35 +352,36 @@ static int __init igep3_i2c_init(void)
}
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
+static struct gpio igep3_wlan_bt_gpios[] __initdata = {
+ { IGEP3_GPIO_WIFI_NPD, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" },
+ { IGEP3_GPIO_WIFI_NRESET, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" },
+ { IGEP3_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" },
+};
static void __init igep3_wifi_bt_init(void)
{
+ int err;
+
/* Configure MUX values for W-LAN + Bluetooth GPIO's */
omap_mux_init_gpio(IGEP3_GPIO_WIFI_NPD, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(IGEP3_GPIO_WIFI_NRESET, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(IGEP3_GPIO_BT_NRESET, OMAP_PIN_OUTPUT);
/* Set GPIO's for W-LAN + Bluetooth combo module */
- if ((gpio_request(IGEP3_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) &&
- (gpio_direction_output(IGEP3_GPIO_WIFI_NPD, 1) == 0)) {
- gpio_export(IGEP3_GPIO_WIFI_NPD, 0);
- } else
- pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NPD\n");
-
- if ((gpio_request(IGEP3_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) &&
- (gpio_direction_output(IGEP3_GPIO_WIFI_NRESET, 1) == 0)) {
- gpio_export(IGEP3_GPIO_WIFI_NRESET, 0);
- gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0);
- udelay(10);
- gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1);
- } else
- pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NRESET\n");
-
- if ((gpio_request(IGEP3_GPIO_BT_NRESET, "GPIO_BT_NRESET") == 0) &&
- (gpio_direction_output(IGEP3_GPIO_BT_NRESET, 1) == 0)) {
- gpio_export(IGEP3_GPIO_BT_NRESET, 0);
- } else
- pr_warning("IGEP3: Could not obtain gpio GPIO_BT_NRESET\n");
+ err = gpio_request_array(igep3_wlan_bt_gpios,
+ ARRAY_SIZE(igep3_wlan_bt_gpios));
+ if (err) {
+ pr_warning("IGEP3: Could not obtain WIFI/BT gpios\n");
+ return;
+ }
+
+ gpio_export(IGEP3_GPIO_WIFI_NPD, 0);
+ gpio_export(IGEP3_GPIO_WIFI_NRESET, 0);
+ gpio_export(IGEP3_GPIO_BT_NRESET, 0);
+
+ gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0);
+ udelay(10);
+ gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1);
}
#else
void __init igep3_wifi_bt_init(void) {}
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e710cd9e079..8d74318ed49 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -106,14 +106,13 @@ static void __init n8x0_usb_init(void)
static char announce[] __initdata = KERN_INFO "TUSB 6010\n";
/* PM companion chip power control pin */
- ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable");
+ ret = gpio_request_one(TUSB6010_GPIO_ENABLE, GPIOF_OUT_INIT_LOW,
+ "TUSB6010 enable");
if (ret != 0) {
printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
TUSB6010_GPIO_ENABLE);
return;
}
- gpio_direction_output(TUSB6010_GPIO_ENABLE, 0);
-
tusb_set_power(0);
ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
@@ -494,8 +493,12 @@ static struct omap_mmc_platform_data mmc1_data = {
static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
-static void __init n8x0_mmc_init(void)
+static struct gpio n810_emmc_gpios[] __initdata = {
+ { N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vddf" },
+ { N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vdd" },
+};
+static void __init n8x0_mmc_init(void)
{
int err;
@@ -512,27 +515,18 @@ static void __init n8x0_mmc_init(void)
mmc1_data.slots[1].ban_openended = 1;
}
- err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch");
+ err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW,
+ "MMC slot switch");
if (err)
return;
- gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0);
-
if (machine_is_nokia_n810()) {
- err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf");
- if (err) {
- gpio_free(N8X0_SLOT_SWITCH_GPIO);
- return;
- }
- gpio_direction_output(N810_EMMC_VSD_GPIO, 0);
-
- err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
+ err = gpio_request_array(n810_emmc_gpios,
+ ARRAY_SIZE(n810_emmc_gpios));
if (err) {
gpio_free(N8X0_SLOT_SWITCH_GPIO);
- gpio_free(N810_EMMC_VSD_GPIO);
return;
}
- gpio_direction_output(N810_EMMC_VIO_GPIO, 0);
}
mmc_data[0] = &mmc1_data;
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index bc30ab092d1..3ff3a2c4b86 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -80,6 +80,12 @@ static u8 omap3_beagle_get_rev(void)
return omap3_beagle_version;
}
+static struct gpio omap3_beagle_rev_gpios[] __initdata = {
+ { 171, GPIOF_IN, "rev_id_0" },
+ { 172, GPIOF_IN, "rev_id_1" },
+ { 173, GPIOF_IN, "rev_id_2" },
+};
+
static void __init omap3_beagle_init_rev(void)
{
int ret;
@@ -89,21 +95,13 @@ static void __init omap3_beagle_init_rev(void)
omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP);
omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP);
- ret = gpio_request(171, "rev_id_0");
- if (ret < 0)
- goto fail0;
-
- ret = gpio_request(172, "rev_id_1");
- if (ret < 0)
- goto fail1;
-
- ret = gpio_request(173, "rev_id_2");
- if (ret < 0)
- goto fail2;
-
- gpio_direction_input(171);
- gpio_direction_input(172);
- gpio_direction_input(173);
+ ret = gpio_request_array(omap3_beagle_rev_gpios,
+ ARRAY_SIZE(omap3_beagle_rev_gpios));
+ if (ret < 0) {
+ printk(KERN_ERR "Unable to get revision detection GPIO pins\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
+ return;
+ }
beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
| (gpio_get_value(173) << 2);
@@ -129,18 +127,6 @@ static void __init omap3_beagle_init_rev(void)
printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
}
-
- return;
-
-fail2:
- gpio_free(172);
-fail1:
- gpio_free(171);
-fail0:
- printk(KERN_ERR "Unable to get revision detection GPIO pins\n");
- omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
-
- return;
}
static struct mtd_partition omap3beagle_nand_partitions[] = {
@@ -235,13 +221,10 @@ static void __init beagle_display_init(void)
{
int r;
- r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
- if (r < 0) {
+ r = gpio_request_one(beagle_dvi_device.reset_gpio, GPIOF_OUT_INIT_LOW,
+ "DVI reset");
+ if (r < 0)
printk(KERN_ERR "Unable to get DVI reset GPIO\n");
- return;
- }
-
- gpio_direction_output(beagle_dvi_device.reset_gpio, 0);
}
#include "sdram-micron-mt46h32m32lf-6.h"
@@ -268,7 +251,7 @@ static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- int r;
+ int r, usb_pwr_level;
if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
mmc[0].gpio_wp = -EINVAL;
@@ -287,66 +270,46 @@ static int beagle_twl_gpio_setup(struct device *dev,
beagle_vmmc1_supply.dev = mmc[0].dev;
beagle_vsim_supply.dev = mmc[0].dev;
- /* REVISIT: need ehci-omap hooks for external VBUS
- * power switch and overcurrent detect
- */
- if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) {
- r = gpio_request(gpio + 1, "EHCI_nOC");
- if (!r) {
- r = gpio_direction_input(gpio + 1);
- if (r)
- gpio_free(gpio + 1);
- }
- if (r)
- pr_err("%s: unable to configure EHCI_nOC\n", __func__);
- }
-
/*
* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
* high / others active low)
- */
- gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
- else
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
-
- /* DVI reset GPIO is different between beagle revisions */
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
- beagle_dvi_device.reset_gpio = 129;
- else
- beagle_dvi_device.reset_gpio = 170;
-
- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
- /*
- * gpio + 1 on Xm controls the TFP410's enable line (active low)
- * gpio + 2 control varies depending on the board rev as follows:
- * P7/P8 revisions(prototype): Camera EN
- * A2+ revisions (production): LDO (supplies DVI, serial, led blocks)
+ * DVI reset GPIO is different between beagle revisions
*/
if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
- r = gpio_request(gpio + 1, "nDVI_PWR_EN");
- if (!r) {
- r = gpio_direction_output(gpio + 1, 0);
- if (r)
- gpio_free(gpio + 1);
- }
+ usb_pwr_level = GPIOF_OUT_INIT_HIGH;
+ beagle_dvi_device.reset_gpio = 129;
+ /*
+ * gpio + 1 on Xm controls the TFP410's enable line (active low)
+ * gpio + 2 control varies depending on the board rev as below:
+ * P7/P8 revisions(prototype): Camera EN
+ * A2+ revisions (production): LDO (DVI, serial, led blocks)
+ */
+ r = gpio_request_one(gpio + 1, GPIOF_OUT_INIT_LOW,
+ "nDVI_PWR_EN");
if (r)
pr_err("%s: unable to configure nDVI_PWR_EN\n",
__func__);
- r = gpio_request(gpio + 2, "DVI_LDO_EN");
- if (!r) {
- r = gpio_direction_output(gpio + 2, 1);
- if (r)
- gpio_free(gpio + 2);
- }
+ r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
+ "DVI_LDO_EN");
if (r)
pr_err("%s: unable to configure DVI_LDO_EN\n",
__func__);
+ } else {
+ usb_pwr_level = GPIOF_OUT_INIT_LOW;
+ beagle_dvi_device.reset_gpio = 170;
+ /*
+ * REVISIT: need ehci-omap hooks for external VBUS
+ * power switch and overcurrent detect
+ */
+ if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
+ pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
+ gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR");
+
+ /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
return 0;
}
@@ -608,9 +571,8 @@ static void __init omap3_beagle_init(void)
omap_serial_init();
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
- gpio_request(170, "DVI_nPD");
/* REVISIT leave DVI powered down until it's needed ... */
- gpio_direction_output(170, true);
+ gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 5066b0bbf63..02e1ad29e1e 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -149,6 +149,15 @@ static inline void __init omap3evm_init_smsc911x(void) { return; }
#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210
#define OMAP3EVM_DVI_PANEL_EN_GPIO 199
+static struct gpio omap3_evm_dss_gpios[] __initdata = {
+ { OMAP3EVM_LCD_PANEL_RESB, GPIOF_OUT_INIT_HIGH, "lcd_panel_resb" },
+ { OMAP3EVM_LCD_PANEL_INI, GPIOF_OUT_INIT_HIGH, "lcd_panel_ini" },
+ { OMAP3EVM_LCD_PANEL_QVGA, GPIOF_OUT_INIT_LOW, "lcd_panel_qvga" },
+ { OMAP3EVM_LCD_PANEL_LR, GPIOF_OUT_INIT_HIGH, "lcd_panel_lr" },
+ { OMAP3EVM_LCD_PANEL_UD, GPIOF_OUT_INIT_HIGH, "lcd_panel_ud" },
+ { OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, "lcd_panel_envdd" },
+};
+
static int lcd_enabled;
static int dvi_enabled;
@@ -156,61 +165,10 @@ static void __init omap3_evm_display_init(void)
{
int r;
- r = gpio_request(OMAP3EVM_LCD_PANEL_RESB, "lcd_panel_resb");
- if (r) {
- printk(KERN_ERR "failed to get lcd_panel_resb\n");
- return;
- }
- gpio_direction_output(OMAP3EVM_LCD_PANEL_RESB, 1);
-
- r = gpio_request(OMAP3EVM_LCD_PANEL_INI, "lcd_panel_ini");
- if (r) {
- printk(KERN_ERR "failed to get lcd_panel_ini\n");
- goto err_1;
- }
- gpio_direction_output(OMAP3EVM_LCD_PANEL_INI, 1);
-
- r = gpio_request(OMAP3EVM_LCD_PANEL_QVGA, "lcd_panel_qvga");
- if (r) {
- printk(KERN_ERR "failed to get lcd_panel_qvga\n");
- goto err_2;
- }
- gpio_direction_output(OMAP3EVM_LCD_PANEL_QVGA, 0);
-
- r = gpio_request(OMAP3EVM_LCD_PANEL_LR, "lcd_panel_lr");
- if (r) {
- printk(KERN_ERR "failed to get lcd_panel_lr\n");
- goto err_3;
- }
- gpio_direction_output(OMAP3EVM_LCD_PANEL_LR, 1);
-
- r = gpio_request(OMAP3EVM_LCD_PANEL_UD, "lcd_panel_ud");
- if (r) {
- printk(KERN_ERR "failed to get lcd_panel_ud\n");
- goto err_4;
- }
- gpio_direction_output(OMAP3EVM_LCD_PANEL_UD, 1);
-
- r = gpio_request(OMAP3EVM_LCD_PANEL_ENVDD, "lcd_panel_envdd");
- if (r) {
- printk(KERN_ERR "failed to get lcd_panel_envdd\n");
- goto err_5;
- }
- gpio_direction_output(OMAP3EVM_LCD_PANEL_ENVDD, 0);
-
- return;
-
-err_5:
- gpio_free(OMAP3EVM_LCD_PANEL_UD);
-err_4:
- gpio_free(OMAP3EVM_LCD_PANEL_LR);
-err_3:
- gpio_free(OMAP3EVM_LCD_PANEL_QVGA);
-err_2:
- gpio_free(OMAP3EVM_LCD_PANEL_INI);
-err_1:
- gpio_free(OMAP3EVM_LCD_PANEL_RESB);
-
+ r = gpio_request_array(omap3_evm_dss_gpios,
+ ARRAY_SIZE(omap3_evm_dss_gpios));
+ if (r)
+ printk(KERN_ERR "failed to get lcd_panel_* gpios\n");
}
static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
@@ -400,7 +358,7 @@ static struct platform_device leds_gpio = {
static int omap3evm_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- int r;
+ int r, lcd_bl_en;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
@@ -417,16 +375,14 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
*/
/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
- r = gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
- if (!r)
- r = gpio_direction_output(gpio + TWL4030_GPIO_MAX,
- (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) ? 1 : 0);
+ lcd_bl_en = get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2 ?
+ GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+ r = gpio_request_one(gpio + TWL4030_GPIO_MAX, lcd_bl_en, "EN_LCD_BKL");
if (r)
printk(KERN_ERR "failed to get/set lcd_bkl gpio\n");
/* gpio + 7 == DVI Enable */
- gpio_request(gpio + 7, "EN_DVI");
- gpio_direction_output(gpio + 7, 0);
+ gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -717,6 +673,11 @@ static struct omap_musb_board_data musb_board_data = {
.power = 100,
};
+static struct gpio omap3_evm_ehci_gpios[] __initdata = {
+ { OMAP3_EVM_EHCI_VBUS, GPIOF_OUT_INIT_HIGH, "enable EHCI VBUS" },
+ { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" },
+};
+
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
@@ -740,16 +701,12 @@ static void __init omap3_evm_init(void)
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
/* enable EHCI VBUS using GPIO22 */
- omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
- gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
- gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
- gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
-
+ omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP);
/* Select EHCI port on main board */
- omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP);
- gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
- gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
- gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
+ omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT,
+ OMAP_PIN_INPUT_PULLUP);
+ gpio_request_array(omap3_evm_ehci_gpios,
+ ARRAY_SIZE(omap3_evm_ehci_gpios));
/* setup EHCI phy reset config */
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 6c22d3f238e..78dd2a7fe6e 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -305,24 +305,13 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
/* gpio + 13 drives 32kHz buffer for wifi module */
gpio_32khz = gpio + 13;
- ret = gpio_request(gpio_32khz, "wifi 32kHz");
+ ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz");
if (ret < 0) {
pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret);
- goto fail;
- }
-
- ret = gpio_direction_output(gpio_32khz, 1);
- if (ret < 0) {
- pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret);
- goto fail_direction;
+ return -ENODEV;
}
return 0;
-
-fail_direction:
- gpio_free(gpio_32khz);
-fail:
- return -ENODEV;
}
static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
@@ -584,14 +573,10 @@ static void __init pandora_wl1251_init(void)
memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
- ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
+ ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
if (ret < 0)
goto fail;
- ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO);
- if (ret < 0)
- goto fail_irq;
-
pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
if (pandora_wl1251_pdata.irq < 0)
goto fail_irq;
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 9981d06b726..085c60a7c47 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -331,12 +331,11 @@ omap3stalker_twl_gpio_setup(struct device *dev,
*/
/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
- gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+ gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW,
+ "EN_LCD_BKL");
/* gpio + 7 == DVI Enable */
- gpio_request(gpio + 7, "EN_DVI");
- gpio_direction_output(gpio + 7, 0);
+ gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
/* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 392278d9a88..82872d7d313 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -146,13 +146,11 @@ static int touchbook_twl_gpio_setup(struct device *dev,
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
-
- gpio_request(gpio + 1, "EHCI_nOC");
- gpio_direction_input(gpio + 1);
+ gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC");
/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
- gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+ gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW,
+ "nEN_USB_PWR");
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -401,15 +399,10 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static void omap3_touchbook_poweroff(void)
{
- int r;
+ int pwr_off = TB_KILL_POWER_GPIO;
- r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset");
- if (r < 0) {
+ if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0)
printk(KERN_ERR "Unable to get kill power GPIO\n");
- return;
- }
-
- gpio_direction_output(TB_KILL_POWER_GPIO, 0);
}
static int __init early_touchbook_revision(char *p)
@@ -435,9 +428,8 @@ static void __init omap3_touchbook_init(void)
omap_serial_init();
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
- gpio_request(176, "DVI_nPD");
/* REVISIT leave DVI powered down until it's needed ... */
- gpio_direction_output(176, true);
+ gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
/* Touchscreen and accelerometer */
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 7eaad629c4c..5d7c0a313dc 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -112,6 +112,11 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
+static struct gpio panda_ehci_gpios[] __initdata = {
+ { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" },
+ { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" },
+};
+
static void __init omap4_ehci_init(void)
{
int ret;
@@ -121,44 +126,27 @@ static void __init omap4_ehci_init(void)
phy_ref_clk = clk_get(NULL, "auxclk3_ck");
if (IS_ERR(phy_ref_clk)) {
pr_err("Cannot request auxclk3\n");
- goto error1;
+ return;
}
clk_set_rate(phy_ref_clk, 19200000);
clk_enable(phy_ref_clk);
- /* disable the power to the usb hub prior to init */
- ret = gpio_request(GPIO_HUB_POWER, "hub_power");
+ /* disable the power to the usb hub prior to init and reset phy+hub */
+ ret = gpio_request_array(panda_ehci_gpios,
+ ARRAY_SIZE(panda_ehci_gpios));
if (ret) {
- pr_err("Cannot request GPIO %d\n", GPIO_HUB_POWER);
- goto error1;
+ pr_err("Unable to initialize EHCI power/reset\n");
+ return;
}
- gpio_export(GPIO_HUB_POWER, 0);
- gpio_direction_output(GPIO_HUB_POWER, 0);
- gpio_set_value(GPIO_HUB_POWER, 0);
- /* reset phy+hub */
- ret = gpio_request(GPIO_HUB_NRESET, "hub_nreset");
- if (ret) {
- pr_err("Cannot request GPIO %d\n", GPIO_HUB_NRESET);
- goto error2;
- }
+ gpio_export(GPIO_HUB_POWER, 0);
gpio_export(GPIO_HUB_NRESET, 0);
- gpio_direction_output(GPIO_HUB_NRESET, 0);
- gpio_set_value(GPIO_HUB_NRESET, 0);
gpio_set_value(GPIO_HUB_NRESET, 1);
usbhs_init(&usbhs_bdata);
/* enable power to hub */
gpio_set_value(GPIO_HUB_POWER, 1);
- return;
-
-error2:
- gpio_free(GPIO_HUB_POWER);
-error1:
- pr_err("Unable to initialize EHCI power/reset\n");
- return;
-
}
static struct omap_musb_board_data musb_board_data = {
@@ -638,27 +626,19 @@ static void omap4_panda_hdmi_mux_init(void)
OMAP_PIN_INPUT_PULLUP);
}
+static struct gpio panda_hdmi_gpios[] = {
+ { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
+ { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+};
+
static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
{
int status;
- status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH,
- "hdmi_gpio_hpd");
- if (status) {
- pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD);
- return status;
- }
- status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH,
- "hdmi_gpio_ls_oe");
- if (status) {
- pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE);
- goto error1;
- }
-
- return 0;
-
-error1:
- gpio_free(HDMI_GPIO_HPD);
+ status = gpio_request_array(panda_hdmi_gpios,
+ ARRAY_SIZE(panda_hdmi_gpios));
+ if (status)
+ pr_err("Cannot request HDMI GPIOs\n");
return status;
}
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index e152c13ded7..c03f92b14f9 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -151,21 +151,20 @@ static int dvi_enabled;
#define OVERO_GPIO_LCD_EN 144
#define OVERO_GPIO_LCD_BL 145
+static struct gpio overo_dss_gpios[] __initdata = {
+ { OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" },
+ { OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" },
+};
+
static void __init overo_display_init(void)
{
- if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) &&
- (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0))
- gpio_export(OVERO_GPIO_LCD_EN, 0);
- else
- printk(KERN_ERR "could not obtain gpio for "
- "OVERO_GPIO_LCD_EN\n");
+ if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) {
+ printk(KERN_ERR "could not obtain DSS control GPIOs\n");
+ return;
+ }
- if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) &&
- (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0))
- gpio_export(OVERO_GPIO_LCD_BL, 0);
- else
- printk(KERN_ERR "could not obtain gpio for "
- "OVERO_GPIO_LCD_BL\n");
+ gpio_export(OVERO_GPIO_LCD_EN, 0);
+ gpio_export(OVERO_GPIO_LCD_BL, 0);
}
static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
@@ -553,8 +552,15 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
+static struct gpio overo_bt_gpios[] __initdata = {
+ { OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" },
+ { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" },
+};
+
static void __init overo_init(void)
{
+ int ret;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
overo_i2c_init();
omap_display_init(&overo_dss_data);
@@ -574,9 +580,9 @@ static void __init overo_init(void)
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
- if ((gpio_request(OVERO_GPIO_W2W_NRESET,
- "OVERO_GPIO_W2W_NRESET") == 0) &&
- (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) {
+ ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH,
+ "OVERO_GPIO_W2W_NRESET");
+ if (ret == 0) {
gpio_export(OVERO_GPIO_W2W_NRESET, 0);
gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
udelay(10);
@@ -586,25 +592,20 @@ static void __init overo_init(void)
"OVERO_GPIO_W2W_NRESET\n");
}
- if ((gpio_request(OVERO_GPIO_BT_XGATE, "OVERO_GPIO_BT_XGATE") == 0) &&
- (gpio_direction_output(OVERO_GPIO_BT_XGATE, 0) == 0))
+ ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
+ if (ret) {
+ pr_err("%s: could not obtain BT gpios\n", __func__);
+ } else {
gpio_export(OVERO_GPIO_BT_XGATE, 0);
- else
- printk(KERN_ERR "could not obtain gpio for OVERO_GPIO_BT_XGATE\n");
-
- if ((gpio_request(OVERO_GPIO_BT_NRESET, "OVERO_GPIO_BT_NRESET") == 0) &&
- (gpio_direction_output(OVERO_GPIO_BT_NRESET, 1) == 0)) {
gpio_export(OVERO_GPIO_BT_NRESET, 0);
gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
mdelay(6);
gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
- } else {
- printk(KERN_ERR "could not obtain gpio for "
- "OVERO_GPIO_BT_NRESET\n");
}
- if ((gpio_request(OVERO_GPIO_USBH_CPEN, "OVERO_GPIO_USBH_CPEN") == 0) &&
- (gpio_direction_output(OVERO_GPIO_USBH_CPEN, 1) == 0))
+ ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH,
+ "OVERO_GPIO_USBH_CPEN");
+ if (ret == 0)
gpio_export(OVERO_GPIO_USBH_CPEN, 0);
else
printk(KERN_ERR "could not obtain gpio for "
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index a5bf5e92eae..2e509f9149e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -558,10 +558,8 @@ static __init void rx51_init_si4713(void)
static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
{
/* FIXME this gpio setup is just a placeholder for now */
- gpio_request(gpio + 6, "backlight_pwm");
- gpio_direction_output(gpio + 6, 0);
- gpio_request(gpio + 7, "speaker_en");
- gpio_direction_output(gpio + 7, 1);
+ gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm");
+ gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en");
return 0;
}
@@ -912,26 +910,20 @@ static void rx51_wl1251_set_power(bool enable)
gpio_set_value(RX51_WL1251_POWER_GPIO, enable);
}
+static struct gpio rx51_wl1251_gpios[] __initdata = {
+ { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" },
+ { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" },
+};
+
static void __init rx51_init_wl1251(void)
{
int irq, ret;
- ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power");
+ ret = gpio_request_array(rx51_wl1251_gpios,
+ ARRAY_SIZE(rx51_wl1251_gpios));
if (ret < 0)
goto error;
- ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0);
- if (ret < 0)
- goto err_power;
-
- ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq");
- if (ret < 0)
- goto err_power;
-
- ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO);
- if (ret < 0)
- goto err_irq;
-
irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO);
if (irq < 0)
goto err_irq;
@@ -943,10 +935,7 @@ static void __init rx51_init_wl1251(void)
err_irq:
gpio_free(RX51_WL1251_IRQ_GPIO);
-
-err_power:
gpio_free(RX51_WL1251_POWER_GPIO);
-
error:
printk(KERN_ERR "wl1251 board initialisation failed\n");
wl1251_pdata.set_power = NULL;
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index 89a66db8b77..19777333aef 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -76,13 +76,12 @@ static int __init rx51_video_init(void)
return 0;
}
- if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) {
+ if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH,
+ "LCD ACX565AKM reset")) {
pr_err("%s failed to get LCD Reset GPIO\n", __func__);
return 0;
}
- gpio_direction_output(RX51_LCD_RESET_GPIO, 1);
-
omap_display_init(&rx51_dss_board_info);
return 0;
}
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 2ee9ab92e0c..6402e781c45 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -77,12 +77,9 @@ static inline void __init zoom_init_quaduart(void)
quart_gpio = ZOOM_QUADUART_GPIO;
- if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
+ if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0)
printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
quart_gpio);
- return;
- }
- gpio_direction_input(quart_gpio);
}
static inline int omap_zoom_debugboard_detect(void)
@@ -92,12 +89,12 @@ static inline int omap_zoom_debugboard_detect(void)
debug_board_detect = ZOOM_SMSC911X_GPIO;
- if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) {
+ if (gpio_request_one(debug_board_detect, GPIOF_IN,
+ "Zoom debug board detect") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
"board detect\n", debug_board_detect);
return 0;
}
- gpio_direction_input(debug_board_detect);
if (!gpio_get_value(debug_board_detect)) {
ret = 0;
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index 37b84c2b850..ce53e82ba13 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -21,34 +21,19 @@
#define LCD_PANEL_RESET_GPIO_PILOT 55
#define LCD_PANEL_QVGA_GPIO 56
+static struct gpio zoom_lcd_gpios[] __initdata = {
+ { -EINVAL, GPIOF_OUT_INIT_HIGH, "lcd reset" },
+ { LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" },
+};
+
static void zoom_lcd_panel_init(void)
{
- int ret;
- unsigned char lcd_panel_reset_gpio;
-
- lcd_panel_reset_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
+ zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
LCD_PANEL_RESET_GPIO_PROD :
LCD_PANEL_RESET_GPIO_PILOT;
- ret = gpio_request(lcd_panel_reset_gpio, "lcd reset");
- if (ret) {
- pr_err("Failed to get LCD reset GPIO (gpio%d).\n",
- lcd_panel_reset_gpio);
- return;
- }
- gpio_direction_output(lcd_panel_reset_gpio, 1);
-
- ret = gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga");
- if (ret) {
- pr_err("Failed to get LCD_PANEL_QVGA_GPIO (gpio%d).\n",
- LCD_PANEL_QVGA_GPIO);
- goto err0;
- }
- gpio_direction_output(LCD_PANEL_QVGA_GPIO, 1);
-
- return;
-err0:
- gpio_free(lcd_panel_reset_gpio);
+ if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios)))
+ pr_err("%s: Failed to get LCD GPIOs.\n", __func__);
}
static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev)
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 489294a715c..118c6f53c5e 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -277,13 +277,11 @@ static int zoom_twl_gpio_setup(struct device *dev,
zoom_vsim_supply.dev = mmc[0].dev;
zoom_vmmc2_supply.dev = mmc[1].dev;
- ret = gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd enable");
- if (ret) {
+ ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
+ "lcd enable");
+ if (ret)
pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n",
LCD_PANEL_ENABLE_GPIO);
- return ret;
- }
- gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
return ret;
}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index 877c6f5807b..ba10c24f3d8 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -147,25 +147,24 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
goto free1;
}
- if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0)
+ if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0)
goto free1;
- gpio_direction_input(gpmc_cfg->gpio_irq);
gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
if (gpmc_cfg->gpio_pwrdwn) {
- ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown");
+ ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn,
+ GPIOF_OUT_INIT_LOW, "SMC91X powerdown");
if (ret)
goto free2;
- gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0);
}
if (gpmc_cfg->gpio_reset) {
- ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset");
+ ret = gpio_request_one(gpmc_cfg->gpio_reset,
+ GPIOF_OUT_INIT_LOW, "SMC91X reset");
if (ret)
goto free3;
- gpio_direction_output(gpmc_cfg->gpio_reset, 0);
gpio_set_value(gpmc_cfg->gpio_reset, 1);
msleep(100);
gpio_set_value(gpmc_cfg->gpio_reset, 0);
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index e09374a48dd..997033129d2 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -63,23 +63,22 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0;
gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff;
- if (gpio_request(gpmc_cfg->gpio_irq, "smsc911x irq") < 0) {
+ if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) {
pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq);
goto free1;
}
- gpio_direction_input(gpmc_cfg->gpio_irq);
gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
if (gpio_is_valid(gpmc_cfg->gpio_reset)) {
- ret = gpio_request(gpmc_cfg->gpio_reset, "smsc911x reset");
+ ret = gpio_request_one(gpmc_cfg->gpio_reset,
+ GPIOF_OUT_INIT_HIGH, "smsc911x reset");
if (ret) {
pr_err("Failed to request reset GPIO%d\n",
gpmc_cfg->gpio_reset);
goto free2;
}
- gpio_direction_output(gpmc_cfg->gpio_reset, 1);
gpio_set_value(gpmc_cfg->gpio_reset, 0);
msleep(100);
gpio_set_value(gpmc_cfg->gpio_reset, 1);
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 8a3c05f3c1d..8dd26b765b7 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -293,12 +293,11 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
);
/* IRQ */
- status = gpio_request(irq, "TUSB6010 irq");
+ status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq");
if (status < 0) {
printk(error, 3, status);
return status;
}
- gpio_direction_input(irq);
tusb_resources[2].start = irq + IH_GPIO_BASE;
/* set up memory timings ... can speed them up later */