Merge branch 'renesas/timer' into next/timer

Conflicts:
	arch/arm/mach-shmobile/timer.c

This resolves a nonobvious merge conflict between renesas
timer changes in the global timer changes with those
from the renesas soc branch and last minute bug fixes that
went into v3.3.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

105 files changed, 852 insertions, 584 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a48aecc17ea..dfb0312f4e7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1280,7 +1280,7 @@ config ARM_ERRATA_743622
 	depends on CPU_V7
 	help
 	  This option enables the workaround for the 743622 Cortex-A9
-	  (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+	  (r2p*) erratum. Under very rare conditions, a faulty
 	  optimisation in the Cortex-A9 Store Buffer may lead to data
 	  corruption. This workaround sets a specific bit in the diagnostic
 	  register of the Cortex-A9 which disables the Store Buffer
diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore
index ce1c5ff746e..3c79f85975a 100644
--- a/arch/arm/boot/.gitignore
+++ b/arch/arm/boot/.gitignore
@@ -3,3 +3,4 @@ zImage
 xipImage
 bootpImage
 uImage
+*.dtb
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index d1bcd7b13eb..fb1f1cfce60 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -320,13 +320,6 @@ err0:
 	return -EBUSY;
 }
 
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as we don't have even crappy BIOSes to set it properly.
- * The implementation is from arch/i386/pci/i386.c
- */
-unsigned int pcibios_max_latency = 255;
-
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PCI bus master devices
 */
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index d8e44a43047..ff3ad224482 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
 	struct pl330_thread *thrd = ch_id;
 	struct pl330_dmac *pl330;
 	unsigned long flags;
-	int ret = 0, active = thrd->req_running;
+	int ret = 0, active;
 
 	if (!thrd || thrd->free || thrd->dmac->state == DYING)
 		return -EINVAL;
 
 	pl330 = thrd->dmac;
+	active = thrd->req_running;
 
 	spin_lock_irqsave(&pl330->lock, flags);
 
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 62f8095d46d..23371b17b23 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -137,6 +137,11 @@
 	disable_irq
 	.endm
 
+	.macro	save_and_disable_irqs_notrace, oldcpsr
+	mrs	\oldcpsr, cpsr
+	disable_irq_notrace
+	.endm
+
 /*
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.
diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h
index 575fa8186ca..c1821385abf 100644
--- a/arch/arm/include/asm/hardware/pl330.h
+++ b/arch/arm/include/asm/hardware/pl330.h
@@ -41,7 +41,7 @@ enum pl330_dstcachectrl {
 	DCCTRL1, /* Bufferable only */
 	DCCTRL2, /* Cacheable, but do not allocate */
 	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
-	DINVALID1 = 8,
+	DINVALID1,              /* AWCACHE = 0x1000 */
 	DINVALID2,
 	DCCTRL6, /* Cacheable write-through, allocate on writes only */
 	DCCTRL7, /* Cacheable write-back, allocate on writes only */
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index b5a5be2536c..90114faa9f3 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
 
 u64 armpmu_event_update(struct perf_event *event,
 			struct hw_perf_event *hwc,
-			int idx, int overflow);
+			int idx);
 
 int armpmu_event_set_period(struct perf_event *event,
 			    struct hw_perf_event *hwc,
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index ce280b8d613..cb8d638924f 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -22,6 +22,7 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
+#include <asm/system.h>
 
 #ifdef __KERNEL__
 #define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 4dd0edab6a6..1651d495074 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm)
 
 	memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
 
+	vma.vm_flags = VM_EXEC;
 	vma.vm_mm = mm;
 
 	flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 5bb91bf3d47..b2abfa18f13 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event,
 u64
 armpmu_event_update(struct perf_event *event,
 		    struct hw_perf_event *hwc,
-		    int idx, int overflow)
+		    int idx)
 {
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
 	u64 delta, prev_raw_count, new_raw_count;
@@ -193,13 +193,7 @@ again:
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
-	new_raw_count &= armpmu->max_period;
-	prev_raw_count &= armpmu->max_period;
-
-	if (overflow)
-		delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
-	else
-		delta = new_raw_count - prev_raw_count;
+	delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
 
 	local64_add(delta, &event->count);
 	local64_sub(delta, &hwc->period_left);
@@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event)
 	if (hwc->idx < 0)
 		return;
 
-	armpmu_event_update(event, hwc, hwc->idx, 0);
+	armpmu_event_update(event, hwc, hwc->idx);
 }
 
 static void
@@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags)
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
 		barrier(); /* why? */
-		armpmu_event_update(event, hwc, hwc->idx, 0);
+		armpmu_event_update(event, hwc, hwc->idx);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
 }
@@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event)
 	hwc->config_base	    |= (unsigned long)mapping;
 
 	if (!hwc->sample_period) {
-		hwc->sample_period  = armpmu->max_period;
+		/*
+		 * For non-sampling runs, limit the sample_period to half
+		 * of the counter width. That way, the new counter value
+		 * is far less likely to overtake the previous one unless
+		 * you have some serious IRQ latency issues.
+		 */
+		hwc->sample_period  = armpmu->max_period >> 1;
 		hwc->last_period    = hwc->sample_period;
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
@@ -680,6 +680,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu)
 }
 
 /*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
+					unsigned long action, void *hcpu)
+{
+	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+		return NOTIFY_DONE;
+
+	if (cpu_pmu && cpu_pmu->reset)
+		cpu_pmu->reset(NULL);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
+	.notifier_call = pmu_cpu_notify,
+};
+
+/*
  * CPU PMU identification and registration.
  */
 static int __init
@@ -730,6 +752,7 @@ init_hw_perf_events(void)
 		pr_info("enabled with %s PMU driver, %d counters available\n",
 			cpu_pmu->name, cpu_pmu->num_events);
 		cpu_pmu_init(cpu_pmu);
+		register_cpu_notifier(&pmu_cpu_notifier);
 		armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
 	} else {
 		pr_info("no hardware support available\n");
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index 533be9930ec..b78af0cc6ef 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
-static int counter_is_active(unsigned long pmcr, int idx)
-{
-	unsigned long mask = 0;
-	if (idx == ARMV6_CYCLE_COUNTER)
-		mask = ARMV6_PMCR_CCOUNT_IEN;
-	else if (idx == ARMV6_COUNTER0)
-		mask = ARMV6_PMCR_COUNT0_IEN;
-	else if (idx == ARMV6_COUNTER1)
-		mask = ARMV6_PMCR_COUNT1_IEN;
-
-	if (mask)
-		return pmcr & mask;
-
-	WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-	return 0;
-}
-
 static irqreturn_t
 armv6pmu_handle_irq(int irq_num,
 		    void *dev)
@@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num,
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!counter_is_active(pmcr, idx))
+		/* Ignore if we don't have an event. */
+		if (!event)
 			continue;
 
 		/*
@@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num,
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 6933244c68f..4d7095af2ab 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx)
 
 	counter = ARMV7_IDX_TO_COUNTER(idx);
 	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
+	isb();
+	/* Clear the overflow flag in case an interrupt is pending. */
+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
+	isb();
+
 	return idx;
 }
 
@@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		/* Ignore if we don't have an event. */
+		if (!event)
+			continue;
+
 		/*
 		 * We have a single interrupt for all counters. Check that
 		 * each counter has overflowed before we process it.
@@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 3b99d826982..71a21e6712f 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		if (!event)
+			continue;
+
 		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+		if (!event)
+			continue;
+
+		if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
 static void
 xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 {
-	unsigned long flags, ien, evtsel;
+	unsigned long flags, ien, evtsel, of_flags;
 	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
 	ien = xscale2pmu_read_int_enable();
@@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	switch (idx) {
 	case XSCALE_CYCLE_COUNTER:
 		ien &= ~XSCALE2_CCOUNT_INT_EN;
+		of_flags = XSCALE2_CCOUNT_OVERFLOW;
 		break;
 	case XSCALE_COUNTER0:
 		ien &= ~XSCALE2_COUNT0_INT_EN;
 		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+		of_flags = XSCALE2_COUNT0_OVERFLOW;
 		break;
 	case XSCALE_COUNTER1:
 		ien &= ~XSCALE2_COUNT1_INT_EN;
 		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+		of_flags = XSCALE2_COUNT1_OVERFLOW;
 		break;
 	case XSCALE_COUNTER2:
 		ien &= ~XSCALE2_COUNT2_INT_EN;
 		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+		of_flags = XSCALE2_COUNT2_OVERFLOW;
 		break;
 	case XSCALE_COUNTER3:
 		ien &= ~XSCALE2_COUNT3_INT_EN;
 		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+		of_flags = XSCALE2_COUNT3_OVERFLOW;
 		break;
 	default:
 		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
@@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	xscale2pmu_write_event_select(evtsel);
 	xscale2pmu_write_int_enable(ien);
+	xscale2pmu_write_overflow_flags(of_flags);
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index e33870ff0ac..ede6443c34d 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -23,6 +23,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
+#include <linux/audit.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
+#ifdef __ARMEB__
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
+#else
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
+#endif
+
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
@@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 	if (!ip)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index a622e7a8b12..fef42b21cec 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -132,7 +132,7 @@ static struct notifier_block twd_cpufreq_nb = {
 
 static int twd_cpufreq_init(void)
 {
-	if (!IS_ERR(twd_clk))
+	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
 		return cpufreq_register_notifier(&twd_cpufreq_nb,
 			CPUFREQ_TRANSITION_NOTIFIER);
 
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index b7582dd10dc..96e2adcd5a8 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -38,10 +38,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 8,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_BASE_DMA,
@@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9g45_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
-	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
-	platform_device_register(&at_hdmac_device);
+#if defined(CONFIG_OF)
+	struct device_node *of_node =
+		of_find_node_by_name(NULL, "dma-controller");
+
+	if (of_node)
+		of_node_put(of_node);
+	else
+#endif
+		platform_device_register(&at_hdmac_device);
 }
 #else
 void __init at91_add_device_hdmac(void) {}
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 61908dce978..9be71c11d0f 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -33,10 +33,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 2,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9RL_BASE_DMA,
@@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9rl_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
 	platform_device_register(&at_hdmac_device);
 }
 #else
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index d5fb44f16d3..d67d0b4feb6 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -34,6 +34,7 @@
 #include <mach/ep93xx_spi.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -361,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	.atag_offset	= 0x100,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= vision_init_machine,
 	.restart	= ep93xx_restart,
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 0fc65ffde8f..38939956c34 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
@@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = {
 	.threshold	= 0x28,
 	.voltage	= 2800000,		/* 2.8V */
 	.orient		= MXT_DIAGONAL,
+	.irqflags	= IRQF_TRIGGER_FALLING,
 };
 
 static struct i2c_board_info i2c3_devs[] __initdata = {
diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h
index 2667f52e3b0..9e3b90df32e 100644
--- a/arch/arm/mach-lpc32xx/include/mach/irqs.h
+++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h
@@ -61,7 +61,7 @@
  */
 #define IRQ_LPC32XX_JTAG_COMM_TX	LPC32XX_SIC1_IRQ(1)
 #define IRQ_LPC32XX_JTAG_COMM_RX	LPC32XX_SIC1_IRQ(2)
-#define IRQ_LPC32XX_GPI_11		LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_GPI_28		LPC32XX_SIC1_IRQ(4)
 #define IRQ_LPC32XX_TS_P		LPC32XX_SIC1_IRQ(6)
 #define IRQ_LPC32XX_TS_IRQ		LPC32XX_SIC1_IRQ(7)
 #define IRQ_LPC32XX_TS_AUX		LPC32XX_SIC1_IRQ(8)
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
index 4eae566dfdc..c74de01ab5b 100644
--- a/arch/arm/mach-lpc32xx/irq.c
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
 		.event_group = &lpc32xx_event_pin_regs,
 		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
 	},
+	[IRQ_LPC32XX_GPI_28] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
+	},
 	[IRQ_LPC32XX_GPIO_00] = {
 		.event_group = &lpc32xx_event_int_regs,
 		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
@@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
 
 		if (state)
 			eventreg |= lpc32xx_events[d->irq].mask;
-		else
+		else {
 			eventreg &= ~lpc32xx_events[d->irq].mask;
 
+			/*
+			 * When disabling the wakeup, clear the latched
+			 * event
+			 */
+			__raw_writel(lpc32xx_events[d->irq].mask,
+				lpc32xx_events[d->irq].
+				event_group->rawstat_reg);
+		}
+
 		__raw_writel(eventreg,
 			lpc32xx_events[d->irq].event_group->enab_reg);
 
@@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void)
 
 	/* Setup SIC1 */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+	__raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+	__raw_writel(SIC1_ATR_DEFAULT,
+				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
 
 	/* Setup SIC2 */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+	__raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+	__raw_writel(SIC2_ATR_DEFAULT,
+				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
 
 	/* Configure supported IRQ's */
 	for (i = 0; i < NR_IRQS; i++) {
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 429cfdbb2b3..f2735281616 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -88,6 +88,7 @@ struct uartinit {
 	char *uart_ck_name;
 	u32 ck_mode_mask;
 	void __iomem *pdiv_clk_reg;
+	resource_size_t mapbase;
 };
 
 static struct uartinit uartinit_data[] __initdata = {
@@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+		.mapbase = LPC32XX_UART5_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
@@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+		.mapbase = LPC32XX_UART3_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
@@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+		.mapbase = LPC32XX_UART4_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
@@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+		.mapbase = LPC32XX_UART6_BASE,
 	},
 #endif
 };
@@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void)
 
 		/* pre-UART clock divider set to 1 */
 		__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+
+		/*
+		 * Force a flush of the RX FIFOs to work around a
+		 * HW bug
+		 */
+		puart = uartinit_data[i].mapbase;
+		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+		__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+		j = LPC32XX_SUART_FIFO_SIZE;
+		while (j--)
+			tmp = __raw_readl(
+				LPC32XX_UART_DLL_FIFO(puart));
+		__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
 	}
 
 	/* This needs to be done after all UART clocks are setup */
 	__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
-	for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
 		/* Force a flush of the RX FIFOs to work around a HW bug */
 		puart = serial_std_platform_data[i].mapbase;
 		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 17cb7606012..3588a558415 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -17,7 +17,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/interrupt.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 7bc17eaa12e..ada1213982b 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -24,7 +24,6 @@
 #include <mach/dma.h>
 #include <mach/devices.h>
 #include <mach/mfp.h>
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <mach/pxa168.h>
 
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index 8e3b5af04a5..bc97170125b 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 309369ea697..be2002f42de 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -416,13 +416,13 @@ static void __init innovator_init(void)
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		omap1_usb_init(&innovator1510_usb_config);
-		innovator_config[1].data = &innovator1510_lcd_config;
+		innovator_config[0].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
 		omap1_usb_init(&h2_usb_config);
-		innovator_config[1].data = &innovator1610_lcd_config;
+		innovator_config[0].data = &innovator1610_lcd_config;
 	}
 #endif
 	omap_board_config = innovator_config;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index d965da45160..e20c8ab80b0 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING
 	  going on could result in system crashes;
 
 config OMAP4_ERRATA_I688
-	bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
-	depends on ARCH_OMAP4 && BROKEN
+	bool "OMAP4 errata: Async Bridge Corruption"
+	depends on ARCH_OMAP4
 	select ARCH_HAS_BARRIERS
 	help
 	  If a data is stalled inside asynchronous bridge because of back
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 42a4d11fad2..67226271760 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
+#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
+#else
+	pr_warn("MMC: notify cover event not available\n");
+#endif
 }
 
 static int n8x0_mmc_late_init(struct device *dev)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c775bead149..c877236a844 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
 
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
 	platform_device_register(&leds_gpio);
 
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index febffde2ff1..7e9338e8d68 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -132,6 +132,7 @@ void omap3_map_io(void);
 void am33xx_map_io(void);
 void omap4_map_io(void);
 void ti81xx_map_io(void);
+void omap_barriers_init(void);
 
 /**
  * omap_test_timeout - busy-loop, testing a condition
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index cfdbb86bc84..72e018b9b26 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	struct timespec ts_preidle, ts_postidle, ts_idle;
 	u32 cpu1_state;
 	int idle_time;
-	int new_state_idx;
 	int cpu_id = smp_processor_id();
 
 	/* Used to keep track of the total time in idle */
@@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	 */
 	cpu1_state = pwrdm_read_pwrst(cpu1_pd);
 	if (cpu1_state != PWRDM_POWER_OFF) {
-		new_state_idx = drv->safe_state_index;
-		cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
+		index = drv->safe_state_index;
+		cx = cpuidle_get_statedata(&dev->states_usage[index]);
 	}
 
 	if (index > 0)
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index 997033129d2..bbb870c04a5 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -19,6 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 
 #include <plat/board.h>
 #include <plat/gpmc.h>
@@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
 	.flags		= SMSC911X_USE_16BIT,
 };
 
+static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+/* Generic regulator definition to satisfy smsc911x */
+static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(gpmc_smsc911x_supply),
+	.consumer_supplies	= gpmc_smsc911x_supply,
+};
+
+static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
+	.supply_name		= "gpmc_smsc911x",
+	.microvolts		= 3300000,
+	.gpio			= -EINVAL,
+	.startup_delay		= 0,
+	.enable_high		= 0,
+	.enabled_at_boot	= 1,
+	.init_data		= &gpmc_smsc911x_reg_init_data,
+};
+
+/*
+ * Platform device id of 42 is a temporary fix to avoid conflicts
+ * with other reg-fixed-voltage devices. The real fix should
+ * involve the driver core providing a way of dynamically
+ * assigning a unique id on registration for platform devices
+ * in the same name space.
+ */
+static struct platform_device gpmc_smsc911x_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= 42,
+	.dev = {
+		.platform_data	= &gpmc_smsc911x_fixed_reg_data,
+	},
+};
+
 /*
  * Initialize smsc911x device connected to the GPMC. Note that we
  * assume that pin multiplexing is done in the board-*.c file,
@@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
 
 	gpmc_cfg = board_data;
 
+	ret = platform_device_register(&gpmc_smsc911x_regulator);
+	if (ret < 0) {
+		pr_err("Unable to register smsc911x regulators: %d\n", ret);
+		return;
+	}
+
 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
 		pr_err("Failed to request GPMC mem region\n");
 		return;
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index b40c2889529..19dd1657245 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	return 0;
 }
 
+static int omap_hsmmc_done;
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
 
 void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
@@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	u32 reg;
 
+	if (omap_hsmmc_done)
+		return;
+
+	omap_hsmmc_done = 1;
+
 	if (!cpu_is_omap44xx()) {
 		if (cpu_is_omap2430()) {
 			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 6c5826605ea..719ee423abe 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev)
 	case 0xb944:
 		omap_revision = AM335X_REV_ES1_0;
 		*cpu_rev = "1.0";
+		break;
 	case 0xb8f2:
 		switch (rev) {
 		case 0:
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index eb50c29fb64..fb11b44fbde 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void)
 void __init omap44xx_map_common_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 609ea2ded7e..415a6f1cf41 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_iva_priv,
 };
+#endif
 
-struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
+#ifdef CONFIG_ARCH_OMAP2
+struct omap_mbox *omap2_mboxes[] = {
+	&mbox_dsp_info,
+#ifdef CONFIG_SOC_OMAP2420
+	&mbox_iva_info,
+#endif
+	NULL
+};
 #endif
 
 #if defined(CONFIG_ARCH_OMAP4)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index fb8bc9fa43b..611a0e3d54c 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
 	return -ENODEV;
 }
 
-static int __init
+static int
 omap_mux_get_by_name(const char *muxname,
 			struct omap_mux_partition **found_partition,
 			struct omap_mux **found_mux)
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index b8822048e40..ac49384d028 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -150,7 +150,8 @@ err_out:
 		platform_device_put(omap_iommu_pdev[i]);
 	return err;
 }
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
 
 static void __exit omap_iommu_exit(void)
 {
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 40a8fbc07e4..70de277f5c1 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -24,12 +24,14 @@
 
 #include <plat/irqs.h>
 #include <plat/sram.h>
+#include <plat/omap-secure.h>
 
 #include <mach/hardware.h>
 #include <mach/omap-wakeupgen.h>
 
 #include "common.h"
 #include "omap4-sar-layout.h"
+#include <linux/export.h>
 
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
@@ -43,6 +45,9 @@ static void __iomem *sar_ram_base;
 
 void __iomem *dram_sync, *sram_sync;
 
+static phys_addr_t paddr;
+static u32 size;
+
 void omap_bus_sync(void)
 {
 	if (dram_sync && sram_sync) {
@@ -51,19 +56,22 @@ void omap_bus_sync(void)
 		isb();
 	}
 }
+EXPORT_SYMBOL(omap_bus_sync);
 
-static int __init omap_barriers_init(void)
+/* Steal one page physical memory for barrier implementation */
+int __init omap_barrier_reserve_memblock(void)
 {
-	struct map_desc dram_io_desc[1];
-	phys_addr_t paddr;
-	u32 size;
-
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
 
 	size = ALIGN(PAGE_SIZE, SZ_1M);
 	paddr = arm_memblock_steal(size, SZ_1M);
 
+	return 0;
+}
+
+void __init omap_barriers_init(void)
+{
+	struct map_desc dram_io_desc[1];
+
 	dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
 	dram_io_desc[0].pfn = __phys_to_pfn(paddr);
 	dram_io_desc[0].length = size;
@@ -75,9 +83,10 @@ static int __init omap_barriers_init(void)
 	pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
 		(long long) paddr, dram_io_desc[0].virtual);
 
-	return 0;
 }
-core_initcall(omap_barriers_init);
+#else
+void __init omap_barriers_init(void)
+{}
 #endif
 
 void __init gic_init_irq(void)
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 1881fe91514..5a65dd04aa3 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	freq = clk->rate;
 	clk_put(clk);
 
+	rcu_read_lock();
 	opp = opp_find_freq_ceil(dev, &freq);
 	if (IS_ERR(opp)) {
+		rcu_read_unlock();
 		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
 			__func__, vdd_name);
 		goto exit;
 	}
 
 	bootup_volt = opp_get_voltage(opp);
+	rcu_read_unlock();
 	if (!bootup_volt) {
 		pr_err("%s: unable to find voltage corresponding "
 			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 10b20c652e5..4b57757bf9d 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = {
 	.constraints = {
 		.min_uV			= 3300000,
 		.max_uV			= 3300000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 771dc781b74..f51348dafaf 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
 	struct omap_hwmod	*oh[2];
-	struct omap_device	*od;
+	struct platform_device	*pdev;
 	int			bus_id = -1;
 	int			i;
 
@@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 		return;
 	}
 
-	od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+	pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
 				(void *)&usbhs_data, sizeof(usbhs_data),
 				omap_uhhtll_latency,
 				ARRAY_SIZE(omap_uhhtll_latency), false);
-	if (IS_ERR(od)) {
+	if (IS_ERR(pdev)) {
 		pr_err("Could not build hwmod devices %s,%s\n",
 			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
 		return;
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index c005e2f5e38..57db2038b23 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	if (cpu_is_omap3630()) {
 		omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
@@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void)
 		omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
 	}
+#endif
 
 	if (cpu_is_omap3517() || cpu_is_omap3505())
 		voltdms = voltagedomains_am35xx;
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index 4e11d022595..c3115f6853d 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
 	omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
 	omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
+#endif
 
 	for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
 		voltdm->sys_clk.name = sys_clk_name;
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 0d729e6619d..42d5cca6625 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
 #endif
 
 extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa_gpio_syscore_ops;
 extern struct syscore_ops pxa2xx_mfp_syscore_ops;
 extern struct syscore_ops pxa3xx_mfp_syscore_ops;
 
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index fb9b62dcf4c..208eef1c048 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -45,6 +45,7 @@
 #include <mach/hx4700.h>
 #include <mach/irda.h>
 
+#include <sound/ak4641.h>
 #include <video/platform_lcd.h>
 #include <video/w100fb.h>
 
@@ -765,6 +766,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = {
 };
 
 /*
+ * Asahi Kasei AK4641 on I2C
+ */
+
+static struct ak4641_platform_data ak4641_info = {
+	.gpio_power = GPIO27_HX4700_CODEC_ON,
+	.gpio_npdn  = GPIO109_HX4700_CODEC_nPDN,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("ak4641", 0x12),
+		.platform_data = &ak4641_info,
+	},
+};
+
+static struct platform_device audio = {
+	.name	= "hx4700-audio",
+	.id	= -1,
+};
+
+
+/*
  * PCMCIA
  */
 
@@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = {
 	&gpio_vbus,
 	&power_supply,
 	&strataflash,
+	&audio,
 	&pcmcia,
 };
 
@@ -827,6 +851,7 @@ static void __init hx4700_init(void)
 	pxa_set_ficp_info(&ficp_info);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
 	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index f14775536b8..29b62afc6f7 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void)
 {
 	int i;
 
+	/* running before pxa_gpio_probe() */
+#ifdef CONFIG_CPU_PXA26x
+	pxa_last_gpio = 89;
+#else
+	pxa_last_gpio = 84;
+#endif
 	for (i = 0; i <= pxa_last_gpio; i++)
 		gpio_desc[i].valid = 1;
 
@@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void)
 {
 	int i, gpio;
 
+	pxa_last_gpio = 120;	/* running before pxa_gpio_probe() */
 	for (i = 0; i <= pxa_last_gpio; i++) {
 		/* skip GPIO2, 5, 6, 7, 8, they are not
 		 * valid pins allow configuration
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 91e4f6c0376..3352b37b60c 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -25,7 +25,6 @@
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
@@ -209,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =
@@ -368,7 +368,6 @@ static int __init pxa25x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(pxa25x_devices,
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index aed6cbcf386..6bce78edce7 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -22,7 +22,6 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
@@ -230,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -456,7 +456,6 @@ static int __init pxa27x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 4f402afa660..3918a672238 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -462,7 +462,6 @@ static int __init pxa3xx_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index d082a583df7..5ce434b95e8 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -283,7 +283,6 @@ static int __init pxa95x_init(void)
 			return ret;
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index febc809ed5a..5aded5e6148 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -15,7 +15,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/mfd/88pm860x.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 8d5168d253a..30989baf7f2 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = {
 #define MAXCTRL_SEL_SH   4
 #define MAXCTRL_STR      (1u << 7)
 
+extern int max1111_read_channel(int);
 /*
  * Read MAX1111 ADC
  */
@@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 	if (machine_is_tosa())
 	    return 0;
 
-	extern int max1111_read_channel(int);
-
 	/* max1111 accepts channels from 0-3, however,
 	 * it is encoded from 0-7 here in the code.
 	 */
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 34cbdac5152..438f02fe122 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
 static unsigned long spitz_charger_wakeup(void)
 {
 	unsigned long ret;
-	ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
+	ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
 		<< GPIO_bit(SPITZ_GPIO_KEY_INT))
-		| (!gpio_get_value(SPITZ_GPIO_SYNC)
-		<< GPIO_bit(SPITZ_GPIO_SYNC));
+		| gpio_get_value(SPITZ_GPIO_SYNC));
 	return ret;
 }
 
diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h
index db8a98ac68c..0c1eb1dfc53 100644
--- a/arch/arm/mach-s3c2440/common.h
+++ b/arch/arm/mach-s3c2440/common.h
@@ -12,6 +12,6 @@
 #ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
 #define __ARCH_ARM_MACH_S3C2440_COMMON_H
 
-void s3c2440_restart(char mode, const char *cmd);
+void s3c244x_restart(char mode, const char *cmd);
 
 #endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 24569550de1..19b577bc09b 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index d6a9763110c..d7ae49c9011 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 5859e609d28..9a4a5bc008e 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index adbbb85bc4c..5d66fb218a4 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440")
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 40eaf844bc1..5198e3e1c5b 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 4c480ef734f..c5daeb612a8 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 80077f6472e..6f68abf44fa 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
 	.timer = &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 20103bafbd4..56af3544759 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 1deb60d12a6..83a1036d7dc 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 517623a09fc..2b3dddb49af 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -35,7 +35,6 @@
 #include <plat/cpu.h>
 #include <plat/s3c244x.h>
 #include <plat/pm.h>
-#include <plat/watchdog-reset.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -74,15 +73,3 @@ void __init s3c2440_map_io(void)
 	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
 	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }
-
-void s3c2440_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		soft_restart(0);
-	}
-
-	arch_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 36bc60f61d0..d15852f642b 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -46,6 +46,7 @@
 #include <plat/pm.h>
 #include <plat/pll.h>
 #include <plat/nand-core.h>
+#include <plat/watchdog-reset.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
@@ -196,3 +197,14 @@ struct syscore_ops s3c244x_pm_syscore_ops = {
 	.suspend	= s3c244x_suspend,
 	.resume		= s3c244x_resume,
 };
+
+void s3c244x_restart(char mode, const char *cmd)
+{
+	if (mode == 's')
+		soft_restart(0);
+
+	arch_wdt_reset();
+
+	/* we'll take a jump through zero as a poor second */
+	soft_restart(0);
+}
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index eff8a96c75e..bd7953b59a8 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -30,6 +30,7 @@
 #include <linux/serial_sci.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/mmc/host.h>
@@ -37,7 +38,7 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_clk.h>
-#include <linux/dma-mapping.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
@@ -46,8 +47,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/traps.h>
@@ -159,19 +158,12 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
 static struct sh_mmcif_plat_data sh_mmcif_platdata = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195,
 	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device mmc_device = {
@@ -321,12 +313,11 @@ static struct resource mipidsi0_resources[] = {
 	},
 };
 
-#define DSI0PHYCR	0xe615006c
 static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 				 void __iomem *base,
 				 int enable)
 {
-	struct clk *pck;
+	struct clk *pck, *phy;
 	int ret;
 
 	pck = clk_get(&pdev->dev, "dsip_clk");
@@ -335,18 +326,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 		goto sh_mipi_set_dot_clock_pck_err;
 	}
 
+	phy = clk_get(&pdev->dev, "dsiphy_clk");
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		goto sh_mipi_set_dot_clock_phy_err;
+	}
+
 	if (enable) {
 		clk_set_rate(pck, clk_round_rate(pck,  24000000));
-		__raw_writel(0x2a809010, DSI0PHYCR);
+		clk_set_rate(phy, clk_round_rate(pck, 510000000));
 		clk_enable(pck);
+		clk_enable(phy);
 	} else {
 		clk_disable(pck);
+		clk_disable(phy);
 	}
 
 	ret = 0;
 
+	clk_put(phy);
+sh_mipi_set_dot_clock_phy_err:
 	clk_put(pck);
-
 sh_mipi_set_dot_clock_pck_err:
 	return ret;
 }
@@ -485,27 +485,6 @@ static struct platform_device *ag5evm_devices[] __initdata = {
 	&sdhi1_device,
 };
 
-static struct map_desc ag5evm_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init ag5evm_map_io(void)
-{
-	iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
-
-	/* setup early devices and console here as well */
-	sh73a0_add_early_devices();
-	shmobile_setup_console();
-}
-
 static void __init ag5evm_init(void)
 {
 	sh73a0_pinmux_init();
@@ -621,22 +600,12 @@ static void __init ag5evm_init(void)
 	platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
 }
 
-static void __init ag5evm_timer_init(void)
-{
-	sh73a0_clock_init();
-	shmobile_timer.init();
-	return;
-}
-
-struct sys_timer ag5evm_timer = {
-	.init	= ag5evm_timer_init,
-};
-
 MACHINE_START(AG5EVM, "ag5evm")
-	.map_io		= ag5evm_map_io,
+	.map_io		= sh73a0_map_io,
+	.init_early	= sh73a0_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= sh73a0_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= ag5evm_init,
-	.timer		= &ag5evm_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index aab0a349f75..4739f039650 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -61,8 +61,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/setup.h>
 
 /*
@@ -295,15 +293,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -311,7 +300,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {
@@ -802,7 +792,7 @@ static struct fsi_ak4642_info fsi2_ak4643_info = {
 static struct platform_device fsi_ak4643_device = {
 	.name	= "fsi-ak4642-audio",
 	.dev	= {
-		.platform_data	= &fsi_info,
+		.platform_data	= &fsi2_ak4643_info,
 	},
 };
 
@@ -1198,27 +1188,6 @@ static struct i2c_board_info i2c1_devices[] = {
 	},
 };
 
-static struct map_desc ap4evb_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init ap4evb_map_io(void)
-{
-	iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
-
-	/* setup early devices and console here as well */
-	sh7372_add_early_devices();
-	shmobile_setup_console();
-}
-
 #define GPIO_PORT9CR	0xE6051009
 #define GPIO_PORT10CR	0xE605100A
 #define USCCR1		0xE6058144
@@ -1227,6 +1196,9 @@ static void __init ap4evb_init(void)
 	u32 srcr4;
 	struct clk *clk;
 
+	/* External clock source */
+	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
+
 	sh7372_pinmux_init();
 
 	/* enable SCIFA0 */
@@ -1463,23 +1435,11 @@ static void __init ap4evb_init(void)
 	pm_clk_add(&lcdc1_device.dev, "hdmi");
 }
 
-static void __init ap4evb_timer_init(void)
-{
-	sh7372_clock_init();
-	shmobile_timer.init();
-
-	/* External clock source */
-	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-}
-
-static struct sys_timer ap4evb_timer = {
-	.init		= ap4evb_timer_init,
-};
-
 MACHINE_START(AP4EVB, "ap4evb")
-	.map_io		= ap4evb_map_io,
+	.map_io		= sh7372_map_io,
+	.init_early	= sh7372_add_early_devices,
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= ap4evb_init,
-	.timer		= &ap4evb_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index 4d220162232..396814a6a2c 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -27,6 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
+#include <linux/videodev2.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -241,7 +242,7 @@ static struct sh_mobile_lcdc_info lcdc0_info = {
 	.clock_source	= LCDC_CLK_BUS,
 	.ch[0] = {
 		.chan			= LCDC_CHAN_MAINLCD,
-		.bpp			= 16,
+		.fourcc = V4L2_PIX_FMT_RGB565,
 		.interface_type		= RGB24,
 		.clock_divider		= 5,
 		.flags			= 0,
@@ -327,28 +328,6 @@ static struct platform_device *bonito_base_devices[] __initdata = {
  * map I/O
  */
 static struct map_desc bonito_io_desc[] __initdata = {
-	 /*
-	  * for CPGA/INTC/PFC
-	  * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff
-	  */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 160 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * for l2x0_init()
-	 * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000
-	 */
-	{
-		.virtual	= 0xf0002000,
-		.pfn		= __phys_to_pfn(0xf0100000),
-		.length		= PAGE_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	},
-#endif
 	/*
 	 * for FPGA (0x1800000-0x19ffffff)
 	 * 0x18000000-0x18002000 -> 0xf0003000-0xf0005000
@@ -363,11 +342,8 @@ static struct map_desc bonito_io_desc[] __initdata = {
 
 static void __init bonito_map_io(void)
 {
+	r8a7740_map_io();
 	iotable_init(bonito_io_desc, ARRAY_SIZE(bonito_io_desc));
-
-	/* setup early devices and console here as well */
-	r8a7740_add_early_devices();
-	shmobile_setup_console();
 }
 
 /*
@@ -491,7 +467,7 @@ static void __init bonito_init(void)
 	}
 }
 
-static void __init bonito_timer_init(void)
+static void __init bonito_earlytimer_init(void)
 {
 	u16 val;
 	u8 md_ck = 0;
@@ -506,17 +482,22 @@ static void __init bonito_timer_init(void)
 		md_ck |= MD_CK0;
 
 	r8a7740_clock_init(md_ck);
-	shmobile_timer.init();
+	shmobile_earlytimer_init();
 }
 
-struct sys_timer bonito_timer = {
-	.init	= bonito_timer_init,
-};
+void __init bonito_add_early_devices(void)
+{
+	r8a7740_add_early_devices();
+
+	/* override timer setup with board-specific code */
+	shmobile_timer.init = bonito_earlytimer_init;
+}
 
 MACHINE_START(BONITO, "bonito")
 	.map_io		= bonito_map_io,
+	.init_early	= bonito_add_early_devices,
 	.init_irq	= r8a7740_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= bonito_init,
-	.timer		= &bonito_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index 72d557281b1..b627e89037f 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -37,8 +37,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 /*
  * IrDA
@@ -246,27 +244,6 @@ static struct platform_device *g3evm_devices[] __initdata = {
 	&irda_device,
 };
 
-static struct map_desc g3evm_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init g3evm_map_io(void)
-{
-	iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
-
-	/* setup early devices and console here as well */
-	sh7367_add_early_devices();
-	shmobile_setup_console();
-}
-
 static void __init g3evm_init(void)
 {
 	sh7367_pinmux_init();
@@ -354,20 +331,11 @@ static void __init g3evm_init(void)
 	platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
 }
 
-static void __init g3evm_timer_init(void)
-{
-	sh7367_clock_init();
-	shmobile_timer.init();
-}
-
-static struct sys_timer g3evm_timer = {
-	.init		= g3evm_timer_init,
-};
-
 MACHINE_START(G3EVM, "g3evm")
-	.map_io		= g3evm_map_io,
+	.map_io		= sh7367_map_io,
+	.init_early	= sh7367_add_early_devices,
 	.init_irq	= sh7367_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= g3evm_init,
-	.timer		= &g3evm_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 2220b885cff..46d757d2759 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -38,8 +38,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 /*
  * SDHI
@@ -260,27 +258,6 @@ static struct platform_device *g4evm_devices[] __initdata = {
 	&sdhi1_device,
 };
 
-static struct map_desc g4evm_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init g4evm_map_io(void)
-{
-	iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
-
-	/* setup early devices and console here as well */
-	sh7377_add_early_devices();
-	shmobile_setup_console();
-}
-
 #define GPIO_SDHID0_D0	0xe60520fc
 #define GPIO_SDHID0_D1	0xe60520fd
 #define GPIO_SDHID0_D2	0xe60520fe
@@ -397,20 +374,11 @@ static void __init g4evm_init(void)
 	platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
 }
 
-static void __init g4evm_timer_init(void)
-{
-	sh7377_clock_init();
-	shmobile_timer.init();
-}
-
-static struct sys_timer g4evm_timer = {
-	.init		= g4evm_timer_init,
-};
-
 MACHINE_START(G4EVM, "g4evm")
-	.map_io		= g4evm_map_io,
+	.map_io		= sh7377_map_io,
+	.init_early	= sh7377_add_early_devices,
 	.init_irq	= sh7377_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= g4evm_init,
-	.timer		= &g4evm_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 857ceeec1bb..61c06729466 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -43,7 +43,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -143,11 +142,10 @@ static struct gpio_keys_button gpio_buttons[] = {
 static struct gpio_keys_platform_data gpio_key_info = {
 	.buttons        = gpio_buttons,
 	.nbuttons       = ARRAY_SIZE(gpio_buttons),
-	.poll_interval  = 250, /* polled for now */
 };
 
 static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys-polled", /* polled for now */
+	.name   = "gpio-keys",
 	.id     = -1,
 	.dev    = {
 		.platform_data  = &gpio_key_info,
@@ -410,27 +408,6 @@ static struct platform_device *kota2_devices[] __initdata = {
 	&sdhi1_device,
 };
 
-static struct map_desc kota2_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init kota2_map_io(void)
-{
-	iotable_init(kota2_io_desc, ARRAY_SIZE(kota2_io_desc));
-
-	/* setup early devices and console here as well */
-	sh73a0_add_early_devices();
-	shmobile_setup_console();
-}
-
 static void __init kota2_init(void)
 {
 	sh73a0_pinmux_init();
@@ -536,22 +513,12 @@ static void __init kota2_init(void)
 	platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices));
 }
 
-static void __init kota2_timer_init(void)
-{
-	sh73a0_clock_init();
-	shmobile_timer.init();
-	return;
-}
-
-struct sys_timer kota2_timer = {
-	.init	= kota2_timer_init,
-};
-
 MACHINE_START(KOTA2, "kota2")
-	.map_io		= kota2_map_io,
+	.map_io		= sh73a0_map_io,
+	.init_early	= sh73a0_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= sh73a0_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= kota2_init,
-	.timer		= &kota2_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9b42fbd10f8..71d27915047 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -43,7 +43,6 @@
 #include <linux/smsc911x.h>
 #include <linux/sh_intc.h>
 #include <linux/tca6416_keypad.h>
-#include <linux/usb/r8a66597.h>
 #include <linux/usb/renesas_usbhs.h>
 #include <linux/dma-mapping.h>
 
@@ -58,8 +57,6 @@
 #include <mach/sh7372.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
 #include <asm/mach-types.h>
 
 /*
@@ -145,11 +142,6 @@
  * 1-2 short | VBUS 5V       | Host
  * open      | external VBUS | Function
  *
- * *1
- * CN31 is used as
- * CONFIG_USB_R8A66597_HCD	Host
- * CONFIG_USB_RENESAS_USBHS	Function
- *
  * CAUTION
  *
  * renesas_usbhs driver can use external interrupt mode
@@ -161,15 +153,6 @@
  * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
  * because Touchscreen is using IRQ7-PORT40.
  * It is impossible to use IRQ7 demux on this board.
- *
- * We can use external interrupt mode USB-Function on "USB1".
- * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
- * But don't select both drivers in same time.
- * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
- *
- * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports shared IRQ,
  */
 
 /*
@@ -208,6 +191,16 @@
  */
 
 /*
+ * FSI - AK4642
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone" on
+ * amixer set "HPOUTL Mixer DACH" on
+ * amixer set "HPOUTR Mixer DACH" on
+ */
+
+/*
  * FIXME !!
  *
  * gpio_no_direction
@@ -676,51 +669,16 @@ static struct platform_device usbhs0_device = {
  * Use J30 to select between Host and Function. This setting
  * can however not be detected by software. Hotplug of USBHS1
  * is provided via IRQ8.
+ *
+ * Current USB1 works as "USB Host".
+ *  - set J30 "short"
+ *
+ * If you want to use it as "USB gadget",
+ *  - J30 "open"
+ *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
+ *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
  */
 #define IRQ8 evt2irq(0x0300)
-
-/* USBHS1 USB Host support via r8a66597_hcd */
-static void usb1_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on is supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
-	__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
-}
-
-static struct r8a66597_platdata usb1_host_data = {
-	.on_chip	= 1,
-	.port_power	= usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
-	[0] = {
-		.name	= "USBHS1",
-		.start	= 0xe68b0000,
-		.end	= 0xe68b00e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb1_host_device = {
-	.name	= "r8a66597_hcd",
-	.id	= 1,
-	.dev = {
-		.dma_mask		= NULL,         /*  not use dma */
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usb1_host_data,
-	},
-	.num_resources	= ARRAY_SIZE(usb1_host_resources),
-	.resource	= usb1_host_resources,
-};
-
-/* USBHS1 USB Function support via renesas_usbhs */
-
 #define USB_PHY_MODE		(1 << 4)
 #define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
 #define USB_PHY_ON		(1 << 1)
@@ -776,7 +734,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
 
 static int usbhs1_get_id(struct platform_device *pdev)
 {
-	return USBHS_GADGET;
+	return USBHS_HOST;
 }
 
 static u32 usbhs1_pipe_cfg[] = {
@@ -807,7 +765,6 @@ static struct usbhs_private usbhs1_private = {
 			.hardware_exit	= usbhs1_hardware_exit,
 			.get_id		= usbhs1_get_id,
 			.phy_reset	= usbhs_phy_reset,
-			.get_vbus	= usbhs_get_vbus,
 		},
 		.driver_param = {
 			.buswait_bwait	= 4,
@@ -1184,15 +1141,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -1200,7 +1148,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {
@@ -1311,7 +1260,6 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usb1_host_device,
 	&usbhs1_device,
 	&usbhs0_device,
 	&leds_device,
@@ -1387,25 +1335,13 @@ static struct i2c_board_info i2c1_devices[] = {
 	},
 };
 
-static struct map_desc mackerel_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
 static void __init mackerel_map_io(void)
 {
-	iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
-
-	/* setup early devices and console here as well */
-	sh7372_add_early_devices();
-	shmobile_setup_console();
+	sh7372_map_io();
+	/* DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't
+	 * enough to allocate the frame buffer memory.
+	 */
+	init_consistent_dma_size(12 << 20);
 }
 
 #define GPIO_PORT9CR	0xE6051009
@@ -1420,6 +1356,9 @@ static void __init mackerel_init(void)
 	struct clk *clk;
 	int ret;
 
+	/* External clock source */
+	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
+
 	sh7372_pinmux_init();
 
 	/* enable SCIFA0 */
@@ -1473,9 +1412,6 @@ static void __init mackerel_init(void)
 	gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
 	gpio_request(GPIO_FN_IDIN_1_113, NULL);
 
-	/* USB phy tweak to make the r8a66597_hcd host driver work */
-	__raw_writew(0x8a0a, 0xe6058130);       /* USBCR4 */
-
 	/* enable FSI2 port A (ak4643) */
 	gpio_request(GPIO_FN_FSIAIBT,	NULL);
 	gpio_request(GPIO_FN_FSIAILR,	NULL);
@@ -1626,23 +1562,11 @@ static void __init mackerel_init(void)
 	pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
 }
 
-static void __init mackerel_timer_init(void)
-{
-	sh7372_clock_init();
-	shmobile_timer.init();
-
-	/* External clock source */
-	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-}
-
-static struct sys_timer mackerel_timer = {
-	.init		= mackerel_timer_init,
-};
-
 MACHINE_START(MACKEREL, "mackerel")
 	.map_io		= mackerel_map_io,
+	.init_early	= sh7372_add_early_devices,
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= mackerel_init,
-	.timer		= &mackerel_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index f0e02c0ce99..cbd5e4cd06d 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -33,8 +33,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/hardware/gic.h>
 #include <asm/traps.h>
 
@@ -72,49 +70,6 @@ static struct platform_device *marzen_devices[] __initdata = {
 	&eth_device,
 };
 
-static struct map_desc marzen_io_desc[] __initdata = {
-	/* 2M entity map for 0xf0000000 (MPCORE) */
-	{
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(0xf0000000),
-		.length		= SZ_2M,
-		.type		= MT_DEVICE_NONSHARED
-	},
-	/* 16M entity map for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */
-	{
-		.virtual	= 0xfe000000,
-		.pfn		= __phys_to_pfn(0xfe000000),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-static void __init marzen_map_io(void)
-{
-	iotable_init(marzen_io_desc, ARRAY_SIZE(marzen_io_desc));
-}
-
-static void __init marzen_init_early(void)
-{
-	r8a7779_add_early_devices();
-
-	/* Early serial console setup is not included here due to
-	 * memory map collisions. The SCIF serial ports in r8a7779
-	 * are difficult to entity map 1:1 due to collision with the
-	 * virtual memory range used by the coherent DMA code on ARM.
-	 *
-	 * Anyone wanting to debug early can remove UPF_IOREMAP from
-	 * the sh-sci serial console platform data, adjust mapbase
-	 * to a static M:N virt:phys mapping that needs to be added to
-	 * the mappings passed with iotable_init() above.
-	 *
-	 * Then add a call to shmobile_setup_console() from this function.
-	 *
-	 * As a final step pass earlyprint=sh-sci.2,115200 on the kernel
-	 * command line.
-	 */
-}
-
 static void __init marzen_init(void)
 {
 	r8a7779_pinmux_init();
@@ -135,23 +90,12 @@ static void __init marzen_init(void)
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
 
-static void __init marzen_timer_init(void)
-{
-	r8a7779_clock_init();
-	shmobile_timer.init();
-	return;
-}
-
-struct sys_timer marzen_timer = {
-	.init	= marzen_timer_init,
-};
-
 MACHINE_START(MARZEN, "marzen")
-	.map_io		= marzen_map_io,
-	.init_early	= marzen_init_early,
+	.map_io		= r8a7779_map_io,
+	.init_early	= r8a7779_add_early_devices,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= marzen_init,
-	.timer		= &marzen_timer,
+	.timer		= &shmobile_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 3b35b9afc00..99c4d743a99 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -93,7 +93,7 @@ static unsigned long div_recalc(struct clk *clk)
 	return clk->parent->rate / (int)(clk->priv);
 }
 
-static struct clk_ops div_clk_ops = {
+static struct sh_clk_ops div_clk_ops = {
 	.recalc	= div_recalc,
 };
 
@@ -125,7 +125,7 @@ static struct clk extal2_div2_clk = {
 	.parent	= &extal2_clk,
 };
 
-static struct clk_ops followparent_clk_ops = {
+static struct sh_clk_ops followparent_clk_ops = {
 	.recalc	= followparent_recalc,
 };
 
@@ -156,7 +156,7 @@ static unsigned long pllc01_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc01_clk_ops = {
+static struct sh_clk_ops pllc01_clk_ops = {
 	.recalc		= pllc01_recalc,
 };
 
@@ -376,7 +376,7 @@ void __init r8a7740_clock_init(u8 md_ck)
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup r8a7740 clocks\n");
 }
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index b4b0e8cd096..7d6e9fe47b5 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -107,7 +107,7 @@ static unsigned long mul4_recalc(struct clk *clk)
 	return clk->parent->rate * 4;
 }
 
-static struct clk_ops mul4_clk_ops = {
+static struct sh_clk_ops mul4_clk_ops = {
 	.recalc		= mul4_recalc,
 };
 
@@ -170,7 +170,7 @@ void __init r8a7779_clock_init(void)
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup r8a7779 clocks\n");
 }
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
index 5218c34a9cc..006e7b5d304 100644
--- a/arch/arm/mach-shmobile/clock-sh7367.c
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -74,7 +74,7 @@ static unsigned long div2_recalc(struct clk *clk)
 	return clk->parent->rate / 2;
 }
 
-static struct clk_ops div2_clk_ops = {
+static struct sh_clk_ops div2_clk_ops = {
 	.recalc		= div2_recalc,
 };
 
@@ -101,7 +101,7 @@ static unsigned long pllc1_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc1_clk_ops = {
+static struct sh_clk_ops pllc1_clk_ops = {
 	.recalc		= pllc1_recalc,
 };
 
@@ -128,7 +128,7 @@ static unsigned long pllc2_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc2_clk_ops = {
+static struct sh_clk_ops pllc2_clk_ops = {
 	.recalc		= pllc2_recalc,
 };
 
@@ -349,7 +349,7 @@ void __init sh7367_clock_init(void)
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup sh7367 clocks\n");
 }
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 293456d8dcf..de243e3c839 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -89,7 +89,7 @@ static unsigned long div2_recalc(struct clk *clk)
 	return clk->parent->rate / 2;
 }
 
-static struct clk_ops div2_clk_ops = {
+static struct sh_clk_ops div2_clk_ops = {
 	.recalc		= div2_recalc,
 };
 
@@ -128,7 +128,7 @@ static unsigned long pllc01_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc01_clk_ops = {
+static struct sh_clk_ops pllc01_clk_ops = {
 	.recalc		= pllc01_recalc,
 };
 
@@ -276,7 +276,7 @@ static int pllc2_set_parent(struct clk *clk, struct clk *parent)
 	return 0;
 }
 
-static struct clk_ops pllc2_clk_ops = {
+static struct sh_clk_ops pllc2_clk_ops = {
 	.recalc		= pllc2_recalc,
 	.round_rate	= pllc2_round_rate,
 	.set_rate	= pllc2_set_rate,
@@ -468,7 +468,7 @@ static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static struct clk_ops fsidiv_clk_ops = {
+static struct sh_clk_ops fsidiv_clk_ops = {
 	.recalc		= fsidiv_recalc,
 	.round_rate	= fsidiv_round_rate,
 	.set_rate	= fsidiv_set_rate,
@@ -710,7 +710,7 @@ void __init sh7372_clock_init(void)
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup sh7372 clocks\n");
 
diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c
index 8cee7b151ae..0798a15936c 100644
--- a/arch/arm/mach-shmobile/clock-sh7377.c
+++ b/arch/arm/mach-shmobile/clock-sh7377.c
@@ -77,7 +77,7 @@ static unsigned long div2_recalc(struct clk *clk)
 	return clk->parent->rate / 2;
 }
 
-static struct clk_ops div2_clk_ops = {
+static struct sh_clk_ops div2_clk_ops = {
 	.recalc		= div2_recalc,
 };
 
@@ -110,7 +110,7 @@ static unsigned long pllc1_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc1_clk_ops = {
+static struct sh_clk_ops pllc1_clk_ops = {
 	.recalc		= pllc1_recalc,
 };
 
@@ -137,7 +137,7 @@ static unsigned long pllc2_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pllc2_clk_ops = {
+static struct sh_clk_ops pllc2_clk_ops = {
 	.recalc		= pllc2_recalc,
 };
 
@@ -360,7 +360,7 @@ void __init sh7377_clock_init(void)
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup sh7377 clocks\n");
 }
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index afbead6a6e1..472d1f5361e 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -88,7 +88,7 @@ static unsigned long div2_recalc(struct clk *clk)
 	return clk->parent->rate / 2;
 }
 
-static struct clk_ops div2_clk_ops = {
+static struct sh_clk_ops div2_clk_ops = {
 	.recalc		= div2_recalc,
 };
 
@@ -97,7 +97,7 @@ static unsigned long div7_recalc(struct clk *clk)
 	return clk->parent->rate / 7;
 }
 
-static struct clk_ops div7_clk_ops = {
+static struct sh_clk_ops div7_clk_ops = {
 	.recalc		= div7_recalc,
 };
 
@@ -106,7 +106,7 @@ static unsigned long div13_recalc(struct clk *clk)
 	return clk->parent->rate / 13;
 }
 
-static struct clk_ops div13_clk_ops = {
+static struct sh_clk_ops div13_clk_ops = {
 	.recalc		= div13_recalc,
 };
 
@@ -122,7 +122,7 @@ static struct clk extal2_div2_clk = {
 	.parent		= &sh73a0_extal2_clk,
 };
 
-static struct clk_ops main_clk_ops = {
+static struct sh_clk_ops main_clk_ops = {
 	.recalc		= followparent_recalc,
 };
 
@@ -156,7 +156,7 @@ static unsigned long pll_recalc(struct clk *clk)
 	return clk->parent->rate * mult;
 }
 
-static struct clk_ops pll_clk_ops = {
+static struct sh_clk_ops pll_clk_ops = {
 	.recalc		= pll_recalc,
 };
 
@@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = {
 			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
 };
 
+/* DSI DIV */
+static unsigned long dsiphy_recalc(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+
+	/* FIXME */
+	if (!(value & 0x000B8000))
+		return clk->parent->rate;
+
+	value &= 0x3f;
+	value += 1;
+
+	if ((value < 12) ||
+	    (value > 33)) {
+		pr_err("DSIPHY has wrong value (%d)", value);
+		return 0;
+	}
+
+	return clk->parent->rate / value;
+}
+
+static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_rate_mult_range_round(clk, 12, 33, rate);
+}
+
+static void dsiphy_disable(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+	value &= ~0x000B8000;
+
+	__raw_writel(value , clk->mapping->base);
+}
+
+static int dsiphy_enable(struct clk *clk)
+{
+	u32 value;
+	int multi;
+
+	value = __raw_readl(clk->mapping->base);
+	multi = (value & 0x3f) + 1;
+
+	if ((multi < 12) || (multi > 33))
+		return -EIO;
+
+	__raw_writel(value | 0x000B8000, clk->mapping->base);
+
+	return 0;
+}
+
+static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 value;
+	int idx;
+
+	idx = rate / clk->parent->rate;
+	if ((idx < 12) || (idx > 33))
+		return -EINVAL;
+
+	idx += -1;
+
+	value = __raw_readl(clk->mapping->base);
+	value = (value & ~0x3f) + idx;
+
+	__raw_writel(value, clk->mapping->base);
+
+	return 0;
+}
+
+static struct sh_clk_ops dsiphy_clk_ops = {
+	.recalc		= dsiphy_recalc,
+	.round_rate	= dsiphy_round_rate,
+	.set_rate	= dsiphy_set_rate,
+	.enable		= dsiphy_enable,
+	.disable	= dsiphy_disable,
+};
+
+static struct clk_mapping dsi0phy_clk_mapping = {
+	.phys	= DSI0PHYCR,
+	.len	= 4,
+};
+
+static struct clk_mapping dsi1phy_clk_mapping = {
+	.phys	= DSI1PHYCR,
+	.len	= 4,
+};
+
+static struct clk dsi0phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI0P], /* late install */
+	.mapping	= &dsi0phy_clk_mapping,
+};
+
+static struct clk dsi1phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI1P], /* late install */
+	.mapping	= &dsi1phy_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+	&dsi0phy_clk,
+	&dsi1phy_clk,
+};
+
 enum { MSTP001,
 	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
 	MSTP219,
@@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
@@ -504,10 +614,13 @@ void __init sh73a0_clock_init(void)
 	if (!ret)
 		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
+	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+		ret = clk_register(late_main_clks[k]);
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-		clk_init();
+		shmobile_clk_init();
 	else
 		panic("failed to setup sh73a0 clocks\n");
 }
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index 31654d78b96..e816ca9bd21 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -24,7 +24,7 @@
 #include <linux/sh_clk.h>
 #include <linux/export.h>
 
-int __init clk_init(void)
+int __init shmobile_clk_init(void)
 {
 	/* Kick the child clocks.. */
 	recalculate_root_clocks();
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 9fde3eb686a..83ad3fe0a75 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -1,6 +1,7 @@
 #ifndef __ARCH_MACH_COMMON_H
 #define __ARCH_MACH_COMMON_H
 
+extern void shmobile_earlytimer_init(void);
 extern struct sys_timer shmobile_timer;
 struct twd_local_timer;
 void shmobile_twd_init(struct twd_local_timer *twd_local_timer);
@@ -8,7 +9,7 @@ extern void shmobile_setup_console(void);
 extern void shmobile_secondary_vector(void);
 extern int shmobile_platform_cpu_kill(unsigned int cpu);
 struct clk;
-extern int clk_init(void);
+extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
 extern struct platform_suspend_ops shmobile_suspend_ops;
 struct cpuidle_driver;
@@ -16,6 +17,7 @@ extern void (*shmobile_cpuidle_modes[])(void);
 extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
 
 extern void sh7367_init_irq(void);
+extern void sh7367_map_io(void);
 extern void sh7367_add_early_devices(void);
 extern void sh7367_add_standard_devices(void);
 extern void sh7367_clock_init(void);
@@ -24,6 +26,7 @@ extern struct clk sh7367_extalb1_clk;
 extern struct clk sh7367_extal2_clk;
 
 extern void sh7377_init_irq(void);
+extern void sh7377_map_io(void);
 extern void sh7377_add_early_devices(void);
 extern void sh7377_add_standard_devices(void);
 extern void sh7377_clock_init(void);
@@ -32,6 +35,7 @@ extern struct clk sh7377_extalc1_clk;
 extern struct clk sh7377_extal2_clk;
 
 extern void sh7372_init_irq(void);
+extern void sh7372_map_io(void);
 extern void sh7372_add_early_devices(void);
 extern void sh7372_add_standard_devices(void);
 extern void sh7372_clock_init(void);
@@ -43,6 +47,7 @@ extern struct clk sh7372_extal1_clk;
 extern struct clk sh7372_extal2_clk;
 
 extern void sh73a0_init_irq(void);
+extern void sh73a0_map_io(void);
 extern void sh73a0_add_early_devices(void);
 extern void sh73a0_add_standard_devices(void);
 extern void sh73a0_clock_init(void);
@@ -58,12 +63,14 @@ extern int sh73a0_boot_secondary(unsigned int cpu);
 extern void sh73a0_smp_prepare_cpus(void);
 
 extern void r8a7740_init_irq(void);
+extern void r8a7740_map_io(void);
 extern void r8a7740_add_early_devices(void);
 extern void r8a7740_add_standard_devices(void);
 extern void r8a7740_clock_init(u8 md_ck);
 extern void r8a7740_pinmux_init(void);
 
 extern void r8a7779_init_irq(void);
+extern void r8a7779_map_io(void);
 extern void r8a7779_add_early_devices(void);
 extern void r8a7779_add_standard_devices(void);
 extern void r8a7779_clock_init(void);
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 881d515a968..cad57578cee 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -515,8 +515,8 @@ enum {
 	SHDMA_SLAVE_MMCIF_RX,
 };
 
-/* PINT interrupts are located at Linux IRQ 768 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+/* PINT interrupts are located at Linux IRQ 800 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
 
 #endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 1eda6b0b69e..9857595eaa7 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
@@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void)
 		setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
 
 		n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+		WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
 		irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
 					      handle_level_irq, "level");
 		set_irq_flags(n, IRQF_VALID); /* yuck */
diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c
index 963532f2b2c..d14c9b04807 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7779.c
@@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	    FN_AUDATA3, 0, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32,
-			     3, 1, 1, 1, 1, 1, 1, 3, 3, 1,
+			     3, 1, 1, 1, 1, 1, 1, 3, 3,
 			     1, 1, 1, 1, 1, 1, 3, 3, 3, 2) {
 	    /* IP4_31_29 [3] */
 	    FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0,
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 1bd6585a6ac..336093f9210 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <mach/irqs.h>
 #include <mach/sh7372.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx) \
@@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
 	{ },
 };
 
+#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
+static struct pinmux_irq pinmux_irqs[] = {
+	PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
+};
+
 static struct pinmux_info sh7372_pinmux_info = {
 	.name = "sh7372_pfc",
 	.reserved_id = PINMUX_RESERVED,
@@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = {
 
 	.gpio_data = pinmux_data,
 	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+	.gpio_irq = pinmux_irqs,
+	.gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
 };
 
 void sh7372_pinmux_init(void)
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 986dca6b3fa..74e52341dd1 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -25,8 +25,41 @@
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <mach/r8a7740.h>
+#include <mach/common.h>
 #include <asm/mach-types.h>
+#include <asm/mach/map.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+static struct map_desc r8a7740_io_desc[] __initdata = {
+	 /*
+	  * for CPGA/INTC/PFC
+	  * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff
+	  */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 160 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+#ifdef CONFIG_CACHE_L2X0
+	/*
+	 * for l2x0_init()
+	 * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000
+	 */
+	{
+		.virtual	= 0xf0002000,
+		.pfn		= __phys_to_pfn(0xf0100000),
+		.length		= PAGE_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	},
+#endif
+};
+
+void __init r8a7740_map_io(void)
+{
+	iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
+}
 
 /* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
@@ -345,8 +378,20 @@ void __init r8a7740_add_standard_devices(void)
 			     ARRAY_SIZE(r8a7740_late_devices));
 }
 
+static void __init r8a7740_earlytimer_init(void)
+{
+	r8a7740_clock_init(0);
+	shmobile_earlytimer_init();
+}
+
 void __init r8a7740_add_early_devices(void)
 {
 	early_platform_add_devices(r8a7740_early_devices,
 				   ARRAY_SIZE(r8a7740_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = r8a7740_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 4725663bd03..6820d785493 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -33,6 +33,31 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+static struct map_desc r8a7779_io_desc[] __initdata = {
+	/* 2M entity map for 0xf0000000 (MPCORE) */
+	{
+		.virtual	= 0xf0000000,
+		.pfn		= __phys_to_pfn(0xf0000000),
+		.length		= SZ_2M,
+		.type		= MT_DEVICE_NONSHARED
+	},
+	/* 16M entity map for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */
+	{
+		.virtual	= 0xfe000000,
+		.pfn		= __phys_to_pfn(0xfe000000),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init r8a7779_map_io(void)
+{
+	iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc));
+}
 
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xffe40000,
@@ -219,6 +244,10 @@ static struct platform_device *r8a7779_late_devices[] __initdata = {
 
 void __init r8a7779_add_standard_devices(void)
 {
+#ifdef CONFIG_CACHE_L2X0
+	/* Early BRESP enable, Shared attribute override enable, 64K*16way */
+	l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff);
+#endif
 	r8a7779_pm_init();
 
 	r8a7779_init_pm_domain(&r8a7779_sh4a);
@@ -232,8 +261,33 @@ void __init r8a7779_add_standard_devices(void)
 			    ARRAY_SIZE(r8a7779_late_devices));
 }
 
+static void __init r8a7779_earlytimer_init(void)
+{
+	r8a7779_clock_init();
+	shmobile_earlytimer_init();
+}
+
 void __init r8a7779_add_early_devices(void)
 {
 	early_platform_add_devices(r8a7779_early_devices,
 				   ARRAY_SIZE(r8a7779_early_devices));
+
+	/* Early serial console setup is not included here due to
+	 * memory map collisions. The SCIF serial ports in r8a7779
+	 * are difficult to entity map 1:1 due to collision with the
+	 * virtual memory range used by the coherent DMA code on ARM.
+	 *
+	 * Anyone wanting to debug early can remove UPF_IOREMAP from
+	 * the sh-sci serial console platform data, adjust mapbase
+	 * to a static M:N virt:phys mapping that needs to be added to
+	 * the mappings passed with iotable_init() above.
+	 *
+	 * Then add a call to shmobile_setup_console() from this function.
+	 *
+	 * As a final step pass earlyprint=sh-sci.2,115200 on the kernel
+	 * command line in case of the marzen board.
+	 */
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = r8a7779_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
index e546017f15d..a51e1a1e699 100644
--- a/arch/arm/mach-shmobile/setup-sh7367.c
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -29,8 +29,28 @@
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+static struct map_desc sh7367_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init sh7367_map_io(void)
+{
+	iotable_init(sh7367_io_desc, ARRAY_SIZE(sh7367_io_desc));
+}
 
 /* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
@@ -435,6 +455,12 @@ void __init sh7367_add_standard_devices(void)
 			    ARRAY_SIZE(sh7367_devices));
 }
 
+static void __init sh7367_earlytimer_init(void)
+{
+	sh7367_clock_init();
+	shmobile_earlytimer_init();
+}
+
 #define SYMSTPCR2 0xe6158048
 #define SYMSTPCR2_CMT1 (1 << 29)
 
@@ -445,4 +471,10 @@ void __init sh7367_add_early_devices(void)
 
 	early_platform_add_devices(sh7367_early_devices,
 				   ARRAY_SIZE(sh7367_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = sh7367_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index a83cf51fc09..c14fb35de47 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -33,8 +33,28 @@
 #include <linux/pm_domain.h>
 #include <mach/hardware.h>
 #include <mach/sh7372.h>
+#include <mach/common.h>
+#include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+static struct map_desc sh7372_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init sh7372_map_io(void)
+{
+	iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc));
+}
 
 /* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
@@ -1045,8 +1065,20 @@ void __init sh7372_add_standard_devices(void)
 	sh7372_add_device_to_domain(&sh7372_a4r, &jpu_device);
 }
 
+static void __init sh7372_earlytimer_init(void)
+{
+	sh7372_clock_init();
+	shmobile_earlytimer_init();
+}
+
 void __init sh7372_add_early_devices(void)
 {
 	early_platform_add_devices(sh7372_early_devices,
 				   ARRAY_SIZE(sh7372_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = sh7372_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c
index bb405b8e459..9f146095098 100644
--- a/arch/arm/mach-shmobile/setup-sh7377.c
+++ b/arch/arm/mach-shmobile/setup-sh7377.c
@@ -30,8 +30,28 @@
 #include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+static struct map_desc sh7377_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init sh7377_map_io(void)
+{
+	iotable_init(sh7377_io_desc, ARRAY_SIZE(sh7377_io_desc));
+}
 
 /* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
@@ -456,6 +476,12 @@ void __init sh7377_add_standard_devices(void)
 			    ARRAY_SIZE(sh7377_devices));
 }
 
+static void __init sh7377_earlytimer_init(void)
+{
+	sh7377_clock_init();
+	shmobile_earlytimer_init();
+}
+
 #define SMSTPCR3 0xe615013c
 #define SMSTPCR3_CMT1 (1 << 29)
 
@@ -466,4 +492,10 @@ void __init sh7377_add_early_devices(void)
 
 	early_platform_add_devices(sh7377_early_devices,
 				   ARRAY_SIZE(sh7377_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = sh7377_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 20e71e5cace..b6a0734a738 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -32,8 +32,28 @@
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
 #include <mach/sh73a0.h>
+#include <mach/common.h>
 #include <asm/mach-types.h>
+#include <asm/mach/map.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+static struct map_desc sh73a0_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+void __init sh73a0_map_io(void)
+{
+	iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
+}
 
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xe6c40000,
@@ -667,8 +687,20 @@ void __init sh73a0_add_standard_devices(void)
 			    ARRAY_SIZE(sh73a0_late_devices));
 }
 
+static void __init sh73a0_earlytimer_init(void)
+{
+	sh73a0_clock_init();
+	shmobile_earlytimer_init();
+}
+
 void __init sh73a0_add_early_devices(void)
 {
 	early_platform_add_devices(sh73a0_early_devices,
 				   ARRAY_SIZE(sh73a0_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+
+	/* override timer setup with soc-specific code */
+	shmobile_timer.init = sh73a0_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 2e687932f83..c0a9093ba3a 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -78,7 +78,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
 	/* enable cache coherency */
 	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
-	if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
+	if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
 		__raw_writel(1 << cpu, __io(WUPCR));	/* wake up */
 	else
 		__raw_writel(1 << cpu, __io(SRESCR));	/* reset */
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index be16231e86f..2fba5f3d1c8 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -37,11 +37,15 @@ static void __init shmobile_late_time_init(void)
 	early_platform_driver_probe("earlytimer", 2, 0);
 }
 
-static void __init shmobile_timer_init(void)
+void __init shmobile_earlytimer_init(void)
 {
 	late_time_init = shmobile_late_time_init;
 }
 
+static void __init shmobile_timer_init(void)
+{
+}
+
 void __init shmobile_twd_init(struct twd_local_timer *twd_local_timer)
 {
 #ifdef CONFIG_HAVE_ARM_TWD
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 52af00446a6..c59e8b892d6 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -5,7 +5,7 @@ config UX500_SOC_COMMON
 	default y
 	select ARM_GIC
 	select HAS_MTU
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369
 
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 9b3d0fbaee7..88c3ba151e8 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4
 	select ARM_GIC
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 1a3ca248816..7edef912163 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -631,7 +631,8 @@ comment "Processor Features"
 
 config ARM_LPAE
 	bool "Support for the Large Physical Address Extension"
-	depends on MMU && CPU_V7
+	depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
+		!CPU_32v4 && !CPU_32v3
 	help
 	  Say Y if you have an ARMv7 processor supporting the LPAE page
 	  table format and you would like to access memory beyond the
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 7a24d39661f..a655d3da386 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -55,7 +55,7 @@ loop1:
 	cmp	r1, #2				@ see what cache we have at this level
 	blt	skip				@ skip if no cache, or just i-cache
 #ifdef CONFIG_PREEMPT
-	save_and_disable_irqs r9		@ make cssr&csidr read atomic
+	save_and_disable_irqs_notrace r9	@ make cssr&csidr read atomic
 #endif
 	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
 	isb					@ isb to sych the new cssr&csidr
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 0404ccbb8aa..f1c8486f750 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -230,9 +230,7 @@ __v7_setup:
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
 #endif
 #ifdef CONFIG_ARM_ERRATA_743622
-	teq	r6, #0x20			@ present in r2p0
-	teqne	r6, #0x21			@ present in r2p1
-	teqne	r6, #0x22			@ present in r2p2
+	teq	r5, #0x00200000			@ only present in r2p*
 	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
 	orreq	r10, r10, #1 << 6		@ set bit #6
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 06383b51e65..4de7d1e79e7 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -69,6 +69,7 @@ void __init omap_reserve(void)
 	omap_vram_reserve_sdram_memblock();
 	omap_dsp_reserve_sdram_memblock();
 	omap_secure_ram_reserve_memblock();
+	omap_barrier_reserve_memblock();
 }
 
 void __init omap_init_consistent_dma_size(void)
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 2efd6454bce..37bbbbb981b 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -428,8 +428,16 @@
 #define OMAP_GPMC_NR_IRQS	8
 #define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
 
+/* PRCM IRQ handler */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define OMAP_PRCM_IRQ_BASE	(OMAP_GPMC_IRQ_END)
+#define OMAP_PRCM_NR_IRQS	64
+#define OMAP_PRCM_IRQ_END	(OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
+#else
+#define OMAP_PRCM_IRQ_END	OMAP_GPMC_IRQ_END
+#endif
 
-#define NR_IRQS			OMAP_GPMC_IRQ_END
+#define NR_IRQS			OMAP_PRCM_IRQ_END
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
index 3047ff923a6..8c7994ce986 100644
--- a/arch/arm/plat-omap/include/plat/omap-secure.h
+++ b/arch/arm/plat-omap/include/plat/omap-secure.h
@@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void)
 { }
 #endif
 
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
 #endif /* __OMAP_SECURE_H__ */
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 9fe35348e03..2bab4c99a23 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void)
 	struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
 	int channel;
 
-	for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
+	for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
 		s3c2410_dma_resume_chan(cp);
 }
 
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index f10768e988d..d21d744e4d9 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -1409,7 +1409,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
 
 #ifdef CONFIG_S3C_DEV_USB_HSOTG
 static struct resource s3c_usb_hsotg_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
+	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
 	[1] = DEFINE_RES_IRQ(IRQ_OTG),
 };
 
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index 0c77e429867..abb5bdecd50 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode,
 static int clockevent_next_event(unsigned long cycles,
 				 struct clock_event_device *clk_event_dev)
 {
-	u16 val;
+	u16 val = readw(gpt_base + CR(CLKEVT));
+
+	if (val & CTRL_ENABLE)
+		writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
 
 	writew(cycles, gpt_base + LOAD(CLKEVT));
 
-	val = readw(gpt_base + CR(CLKEVT));
 	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
 	writew(val, gpt_base + CR(CLKEVT));