Merge tag 'usb-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.13

Final conversions to configfs for mass storage, acm_ms, and
multi gadgets.

MUSB should now work out of the box on AM335x-based boards
(beagle bone white and black) with DMA thanks to Sebastian's
work.

We can now enable VERBOSE_DEBUG on builds of drivers/usb/gadget/
by selecting CONFIG_USB_GADGET_VERBOSE.

s3c-hsotg got quite a few non-critical fixes but also learned
a few new tricks (isochronous transfers, multi count support).

The Marvel USB3 Controller driver got a memory leak fix.

devm_usb_get_phy() learned not to return NULL, ever.

Other than these patches, we have the usual set of cleanups
ranging from removal of unnecessary *_set_drvdata() to using
SIMPLE_DEV_PM_OPS.

Signed-of-by: Felipe Balbi <balbi@ti.com>

3 files changed, 9 insertions, 16 deletions

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index f26918467ef..8b9cd0690ce 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -289,18 +289,12 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = {
 
 static struct gpio_led gpio_leds[];
 
-/* PHY's VCC regulator might be added later, so flag that we need it */
-static struct usb_phy_gen_xceiv_platform_data hsusb2_phy_data = {
-	.needs_vcc = true,
-};
-
 static struct usbhs_phy_data phy_data[] = {
 	{
 		.port = 2,
 		.reset_gpio = 147,
 		.vcc_gpio = -1,		/* updated in beagle_twl_gpio_setup */
 		.vcc_polarity = 1,	/* updated in beagle_twl_gpio_setup */
-		.platform_data = &hsusb2_phy_data,
 	},
 };
 
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index e83a6a4b184..10855eb4ccc 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -435,6 +435,7 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 	struct platform_device *pdev;
 	char *phy_id;
 	struct platform_device_info pdevinfo;
+	struct usb_phy_gen_xceiv_platform_data nop_pdata;
 
 	for (i = 0; i < num_phys; i++) {
 
@@ -455,11 +456,18 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 			return -ENOMEM;
 		}
 
+		/* set platform data */
+		memset(&nop_pdata, 0, sizeof(nop_pdata));
+		if (gpio_is_valid(phy->vcc_gpio))
+			nop_pdata.needs_vcc = true;
+		nop_pdata.gpio_reset = phy->reset_gpio;
+		nop_pdata.type = USB_PHY_TYPE_USB2;
+
 		/* create a NOP PHY device */
 		memset(&pdevinfo, 0, sizeof(pdevinfo));
 		pdevinfo.name = nop_name;
 		pdevinfo.id = phy->port;
-		pdevinfo.data = phy->platform_data;
+		pdevinfo.data = &nop_pdata;
 		pdevinfo.size_data =
 			sizeof(struct usb_phy_gen_xceiv_platform_data);
 		scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d",
@@ -474,14 +482,6 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 
 		usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
 
-		/* Do we need RESET regulator ? */
-		if (gpio_is_valid(phy->reset_gpio)) {
-			scnprintf(rail_name, MAX_STR,
-					"hsusb%d_reset", phy->port);
-			usbhs_add_regulator(rail_name, phy_id, "reset",
-						phy->reset_gpio, 1);
-		}
-
 		/* Do we need VCC regulator ? */
 		if (gpio_is_valid(phy->vcc_gpio)) {
 			scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
index e7261ebcf7b..4ba2ae75989 100644
--- a/arch/arm/mach-omap2/usb.h
+++ b/arch/arm/mach-omap2/usb.h
@@ -58,7 +58,6 @@ struct usbhs_phy_data {
 	int reset_gpio;
 	int vcc_gpio;
 	bool vcc_polarity;	/* 1 active high, 0 active low */
-	void *platform_data;
 };
 
 extern void usb_musb_init(struct omap_musb_board_data *board_data);