Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (226 commits)
  mtd: tests: annotate as DANGEROUS in Kconfig
  mtd: tests: don't use mtd0 as a default
  mtd: clean up usage of MTD_DOCPROBE_ADDRESS
  jffs2: add compr=lzo and compr=zlib options
  jffs2: implement mount option parsing and compression overriding
  mtd: nand: initialize ops.mode
  mtd: provide an alias for the redboot module name
  mtd: m25p80: don't probe device which has status of 'disabled'
  mtd: nand_h1900 never worked
  mtd: Add DiskOnChip G3 support
  mtd: m25p80: add EON flash EN25Q32B into spi flash id table
  mtd: mark block device queue as non-rotational
  mtd: r852: make r852_pm_ops static
  mtd: m25p80: add support for at25df321a spi data flash
  mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks
  mtd: nand: switch `check_pattern()' to standard `memcmp()'
  mtd: nand: invalidate cache on unaligned reads
  mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set
  mtd: nand: wait to set BBT version
  mtd: nand: scrub BBT on ECC errors
  ...

Fix up trivial conflicts:
 - arch/arm/mach-at91/board-usb-a9260.c
	Merged into board-usb-a926x.c
 - drivers/mtd/maps/lantiq-flash.c
	add_mtd_partitions -> mtd_device_register vs changed to use
	mtd_device_parse_register.

3 files changed, 6 insertions, 14 deletions

diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index fafed4c38fd..1f17bde52cd 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -90,11 +90,6 @@ static struct mtd_partition nand_partitions[] = {
 	},
 };
 
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(nand_partitions);
-	return nand_partitions;
-}
 
 static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
 	.cle		= 21,
@@ -102,7 +97,8 @@ static struct atmel_nand_data atngw100mkii_nand_data __initdata = {
 	.rdy_pin	= GPIO_PIN_PB(28),
 	.enable_pin	= GPIO_PIN_PE(23),
 	.bus_width_16	= true,
-	.partition_info	= nand_part_info,
+	.parts		= nand_partitions,
+	.num_parts	= ARRAY_SIZE(nand_partitions),
 };
 #endif
 
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 6ce30fb2ec9..4643ff5107c 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -90,18 +90,13 @@ static struct mtd_partition nand_partitions[] = {
 	},
 };
 
-static struct mtd_partition *nand_part_info(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(nand_partitions);
-	return nand_partitions;
-}
-
 static struct atmel_nand_data atstk1006_nand_data __initdata = {
 	.cle		= 21,
 	.ale		= 22,
 	.rdy_pin	= GPIO_PIN_PB(30),
 	.enable_pin	= GPIO_PIN_PB(29),
-	.partition_info	= nand_part_info,
+	.parts		= nand_partitions,
+	.num_parts	= ARRAY_SIZE(num_partitions),
 };
 #endif
 
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 679458d9a62..5d7ffca7d69 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -128,7 +128,8 @@ struct atmel_nand_data {
 	u8	ale;		/* address line number connected to ALE */
 	u8	cle;		/* address line number connected to CLE */
 	u8	bus_width_16;	/* buswidth is 16 bit */
-	struct mtd_partition *(*partition_info)(int size, int *num_partitions);
+	struct mtd_partition *parts;
+	unsigned int	num_parts;
 };
 struct platform_device *
 at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);