diff options
| author | Mark Jackson <mpfj@mimc.co.uk> | 2008-10-13 10:46:27 +0000 |
|---|---|---|
| committer | Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 2008-10-13 16:36:11 +0200 |
| commit | 198f29358a31cdca1a496d19da90bd5d6c8527ce (patch) | |
| tree | 7966da29439dba833f240a60ce7b900d0d7b1813 /arch/avr32 | |
| parent | 45c349b58c58f3922bfdec917aa30ff8425caa3f (diff) | |
avr32: Fix MIMC200 board use of SPD network pins
The MIMC200 board uses the SPD output pin from the Ethernet MACs for
other purposes.
One of these is as a board-reset, so I've had to #define off the SPD
output pin declaration.
This is probably not the best way of achieving this, but works in the
current framework.
Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Diffstat (limited to 'arch/avr32')
| -rw-r--r-- | arch/avr32/mach-at32ap/at32ap700x.c | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 813b6844cdf..caec25a2eec 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1091,7 +1091,9 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data) pin_mask |= (1 << 11); /* RXD2 */ pin_mask |= (1 << 12); /* RXD3 */ pin_mask |= (1 << 14); /* RXCK */ +#ifndef CONFIG_BOARD_MIMC200 pin_mask |= (1 << 18); /* SPD */ +#endif } select_peripheral(PIOC, pin_mask, PERIPH_A, 0); @@ -1112,8 +1114,10 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data) pin_mask |= (1 << 3); /* MDC */ pin_mask |= (1 << 2); /* MDIO */ +#ifndef CONFIG_BOARD_MIMC200 if (!data->is_rmii) pin_mask |= (1 << 15); /* SPD */ +#endif select_peripheral(PIOD, pin_mask, PERIPH_B, 0); |