[Blackfin] arch: move all code related to CPLB handling into a new subdirectory under kernel/

Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

7 files changed, 993 insertions, 1 deletions

diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 8a4cfb293b2..318b9b692a4 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -7,7 +7,7 @@ extra-y := init_task.o vmlinux.lds
 obj-y := \
 	entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
 	sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \
-	fixed_code.o cplbinit.o cacheinit.o reboot.o bfin_gpio.o
+	fixed_code.o reboot.o bfin_gpio.o
 
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_MODULES)                += module.o
diff --git a/arch/blackfin/kernel/cplb-nompu/Makefile b/arch/blackfin/kernel/cplb-nompu/Makefile
new file mode 100644
index 00000000000..d36ea9b5382
--- /dev/null
+++ b/arch/blackfin/kernel/cplb-nompu/Makefile
@@ -0,0 +1,8 @@
+#
+# arch/blackfin/kernel/cplb-nompu/Makefile
+#
+
+obj-y := cplbinit.o cacheinit.o cplbhdlr.o cplbmgr.o
+
+obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
+
diff --git a/arch/blackfin/kernel/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
index 62cbba7364b..62cbba7364b 100644
--- a/arch/blackfin/kernel/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
new file mode 100644
index 00000000000..2788532de72
--- /dev/null
+++ b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
@@ -0,0 +1,130 @@
+/*
+ * File:         arch/blackfin/mach-common/cplbhdlr.S
+ * Based on:
+ * Author:       LG Soft India
+ *
+ * Created:      ?
+ * Description:  CPLB exception handler
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/cplb.h>
+#include <asm/entry.h>
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.type _cplb_mgr, STT_FUNC;
+.type _panic_cplb_error, STT_FUNC;
+
+.align 2
+
+ENTRY(__cplb_hdr)
+	R2 = SEQSTAT;
+
+	/* Mask the contents of SEQSTAT and leave only EXCAUSE in R2 */
+	R2 <<= 26;
+	R2 >>= 26;
+
+	R1 = 0x23; /* Data access CPLB protection violation */
+	CC = R2 == R1;
+	IF !CC JUMP .Lnot_data_write;
+	R0 = 2;		/* is a write to data space*/
+	JUMP .Lis_icplb_miss;
+
+.Lnot_data_write:
+	R1 = 0x2C; /* CPLB miss on an instruction fetch */
+	CC = R2 == R1;
+	R0 = 0;		/* is_data_miss == False*/
+	IF CC JUMP .Lis_icplb_miss;
+
+	R1 = 0x26;
+	CC = R2 == R1;
+	IF !CC JUMP .Lunknown;
+
+	R0 = 1;		/* is_data_miss == True*/
+
+.Lis_icplb_miss:
+
+#if defined(CONFIG_BFIN_ICACHE) || defined(CONFIG_BFIN_DCACHE)
+# if defined(CONFIG_BFIN_ICACHE) && !defined(CONFIG_BFIN_DCACHE)
+	R1 = CPLB_ENABLE_ICACHE;
+# endif
+# if !defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE)
+	R1 = CPLB_ENABLE_DCACHE;
+# endif
+# if defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE)
+	R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE;
+# endif
+#else
+	R1 = 0;
+#endif
+
+	[--SP] = RETS;
+	CALL _cplb_mgr;
+	RETS = [SP++];
+	CC = R0 == 0;
+	IF !CC JUMP .Lnot_replaced;
+	RTS;
+
+/*
+ * Diagnostic exception handlers
+ */
+.Lunknown:
+	R0 = CPLB_UNKNOWN_ERR;
+	JUMP .Lcplb_error;
+
+.Lnot_replaced:
+	CC = R0 == CPLB_NO_UNLOCKED;
+	IF !CC JUMP .Lnext_check;
+	R0 = CPLB_NO_UNLOCKED;
+	JUMP .Lcplb_error;
+
+.Lnext_check:
+	CC = R0 == CPLB_NO_ADDR_MATCH;
+	IF !CC JUMP .Lnext_check2;
+	R0 = CPLB_NO_ADDR_MATCH;
+	JUMP .Lcplb_error;
+
+.Lnext_check2:
+	CC = R0 == CPLB_PROT_VIOL;
+	IF !CC JUMP .Lstrange_return_from_cplb_mgr;
+	R0 = CPLB_PROT_VIOL;
+	JUMP .Lcplb_error;
+
+.Lstrange_return_from_cplb_mgr:
+	IDLE;
+	CSYNC;
+	JUMP .Lstrange_return_from_cplb_mgr;
+
+.Lcplb_error:
+	R1 = sp;
+	SP += -12;
+	call _panic_cplb_error;
+	SP += 12;
+	JUMP _handle_bad_cplb;
+
+ENDPROC(__cplb_hdr)
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinfo.c b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c
new file mode 100644
index 00000000000..a4f0b428a34
--- /dev/null
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c
@@ -0,0 +1,208 @@
+/*
+ * File:         arch/blackfin/mach-common/cplbinfo.c
+ * Based on:
+ * Author:       Sonic Zhang <sonic.zhang@analog.com>
+ *
+ * Created:      Jan. 2005
+ * Description:  Display CPLB status
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+
+#include <asm/current.h>
+#include <asm/system.h>
+#include <asm/cplb.h>
+#include <asm/blackfin.h>
+
+#define CPLB_I 1
+#define CPLB_D 2
+
+#define SYNC_SYS    SSYNC()
+#define SYNC_CORE   CSYNC()
+
+#define CPLB_BIT_PAGESIZE 0x30000
+
+static int page_size_table[4] = {
+	0x00000400,		/* 1K */
+	0x00001000,		/* 4K */
+	0x00100000,		/* 1M */
+	0x00400000		/* 4M */
+};
+
+static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" };
+
+static int cplb_find_entry(unsigned long *cplb_addr,
+			   unsigned long *cplb_data, unsigned long addr,
+			   unsigned long data)
+{
+	int ii;
+
+	for (ii = 0; ii < 16; ii++)
+		if (addr >= cplb_addr[ii] && addr < cplb_addr[ii] +
+		    page_size_table[(cplb_data[ii] & CPLB_BIT_PAGESIZE) >> 16]
+			&& (cplb_data[ii] == data))
+			return ii;
+
+	return -1;
+}
+
+static char *cplb_print_entry(char *buf, int type)
+{
+	unsigned long *p_addr = dpdt_table;
+	unsigned long *p_data = dpdt_table + 1;
+	unsigned long *p_icount = dpdt_swapcount_table;
+	unsigned long *p_ocount = dpdt_swapcount_table + 1;
+	unsigned long *cplb_addr = (unsigned long *)DCPLB_ADDR0;
+	unsigned long *cplb_data = (unsigned long *)DCPLB_DATA0;
+	int entry = 0, used_cplb = 0;
+
+	if (type == CPLB_I) {
+		buf += sprintf(buf, "Instruction CPLB entry:\n");
+		p_addr = ipdt_table;
+		p_data = ipdt_table + 1;
+		p_icount = ipdt_swapcount_table;
+		p_ocount = ipdt_swapcount_table + 1;
+		cplb_addr = (unsigned long *)ICPLB_ADDR0;
+		cplb_data = (unsigned long *)ICPLB_DATA0;
+	} else
+		buf += sprintf(buf, "Data CPLB entry:\n");
+
+	buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\tiCount\toCount\n");
+
+	while (*p_addr != 0xffffffff) {
+		entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data);
+		if (entry >= 0)
+			used_cplb |= 1 << entry;
+
+		buf +=
+		    sprintf(buf,
+			    "0x%08lx\t0x%05lx\t%s\t%c\t%c\t%2d\t%ld\t%ld\n",
+			    *p_addr, *p_data,
+			    page_size_string_table[(*p_data & 0x30000) >> 16],
+			    (*p_data & CPLB_VALID) ? 'Y' : 'N',
+			    (*p_data & CPLB_LOCK) ? 'Y' : 'N', entry, *p_icount,
+			    *p_ocount);
+
+		p_addr += 2;
+		p_data += 2;
+		p_icount += 2;
+		p_ocount += 2;
+	}
+
+	if (used_cplb != 0xffff) {
+		buf += sprintf(buf, "Unused/mismatched CPLBs:\n");
+
+		for (entry = 0; entry < 16; entry++)
+			if (0 == ((1 << entry) & used_cplb)) {
+				int flags = cplb_data[entry];
+				buf +=
+				    sprintf(buf,
+					    "%2d: 0x%08lx\t0x%05x\t%s\t%c\t%c\n",
+					    entry, cplb_addr[entry], flags,
+					    page_size_string_table[(flags &
+								    0x30000) >>
+								   16],
+					    (flags & CPLB_VALID) ? 'Y' : 'N',
+					    (flags & CPLB_LOCK) ? 'Y' : 'N');
+			}
+	}
+
+	buf += sprintf(buf, "\n");
+
+	return buf;
+}
+
+static int cplbinfo_proc_output(char *buf)
+{
+	char *p;
+
+	p = buf;
+
+	p += sprintf(p, "------------------ CPLB Information ------------------\n\n");
+
+	if (bfin_read_IMEM_CONTROL() & ENICPLB)
+		p = cplb_print_entry(p, CPLB_I);
+	else
+		p += sprintf(p, "Instruction CPLB is disabled.\n\n");
+
+	if (bfin_read_DMEM_CONTROL() & ENDCPLB)
+		p = cplb_print_entry(p, CPLB_D);
+	else
+		p += sprintf(p, "Data CPLB is disabled.\n");
+
+	return p - buf;
+}
+
+static int cplbinfo_read_proc(char *page, char **start, off_t off,
+			      int count, int *eof, void *data)
+{
+	int len;
+
+	len = cplbinfo_proc_output(page);
+	if (len <= off + count)
+		*eof = 1;
+	*start = page + off;
+	len -= off;
+	if (len > count)
+		len = count;
+	if (len < 0)
+		len = 0;
+	return len;
+}
+
+static int cplbinfo_write_proc(struct file *file, const char __user *buffer,
+			       unsigned long count, void *data)
+{
+	printk(KERN_INFO "Reset the CPLB swap in/out counts.\n");
+	memset(ipdt_swapcount_table, 0, MAX_SWITCH_I_CPLBS * sizeof(unsigned long));
+	memset(dpdt_swapcount_table, 0, MAX_SWITCH_D_CPLBS * sizeof(unsigned long));
+
+	return count;
+}
+
+static int __init cplbinfo_init(void)
+{
+	struct proc_dir_entry *entry;
+
+	entry = create_proc_entry("cplbinfo", 0, NULL);
+	if (!entry)
+		return -ENOMEM;
+
+	entry->read_proc = cplbinfo_read_proc;
+	entry->write_proc = cplbinfo_write_proc;
+	entry->data = NULL;
+
+	return 0;
+}
+
+static void __exit cplbinfo_exit(void)
+{
+	remove_proc_entry("cplbinfo", NULL);
+}
+
+module_init(cplbinfo_init);
+module_exit(cplbinfo_exit);
diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 6320bc45fbb..6320bc45fbb 100644
--- a/arch/blackfin/kernel/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.S b/arch/blackfin/kernel/cplb-nompu/cplbmgr.S
new file mode 100644
index 00000000000..f5cf3accef3
--- /dev/null
+++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.S
@@ -0,0 +1,646 @@
+/*
+ * File:         arch/blackfin/mach-common/cplbmgtr.S
+ * Based on:
+ * Author:       LG Soft India
+ *
+ * Created:      ?
+ * Description:  CPLB replacement routine for CPLB mismatch
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+/* Usage: int _cplb_mgr(is_data_miss,int enable_cache)
+ * is_data_miss==2 => Mark as Dirty, write to the clean data page
+ * is_data_miss==1 => Replace a data CPLB.
+ * is_data_miss==0 => Replace an instruction CPLB.
+ *
+ * Returns:
+ * CPLB_RELOADED	=> Successfully updated CPLB table.
+ * CPLB_NO_UNLOCKED	=> All CPLBs are locked, so cannot be evicted.
+ *			   This indicates that the CPLBs in the configuration
+ *			   tablei are badly configured, as this should never
+ *			   occur.
+ * CPLB_NO_ADDR_MATCH	=> The address being accessed, that triggered the
+ *			   exception, is not covered by any of the CPLBs in
+ *			   the configuration table. The application is
+ *			   presumably misbehaving.
+ * CPLB_PROT_VIOL	=> The address being accessed, that triggered the
+ *			   exception, was not a first-write to a clean Write
+ *			   Back Data page, and so presumably is a genuine
+ *			   violation of the page's protection attributes.
+ *			   The application is misbehaving.
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <asm/cplb.h>
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2;
+ENTRY(_cplb_mgr)
+
+	[--SP]=( R7:4,P5:3 );
+
+	CC = R0 == 2;
+	IF CC JUMP .Ldcplb_write;
+
+	CC = R0 == 0;
+	IF !CC JUMP .Ldcplb_miss_compare;
+
+	/* ICPLB Miss Exception. We need to choose one of the
+	* currently-installed CPLBs, and replace it with one
+	* from the configuration table.
+	*/
+
+	/* A multi-word instruction can cross a page boundary. This means the
+	 * first part of the instruction can be in a valid page, but the
+	 * second part is not, and hence generates the instruction miss.
+	 * However, the fault address is for the start of the instruction,
+	 * not the part that's in the bad page. Therefore, we have to check
+	 * whether the fault address applies to a page that is already present
+	 * in the table.
+	 */
+
+	P4.L = LO(ICPLB_FAULT_ADDR);
+	P4.H = HI(ICPLB_FAULT_ADDR);
+
+	P1 = 16;
+	P5.L = _page_size_table;
+	P5.H = _page_size_table;
+
+	P0.L = LO(ICPLB_DATA0);
+	P0.H = HI(ICPLB_DATA0);
+	R4 = [P4];		/* Get faulting address*/
+	R6 = 64;		/* Advance past the fault address, which*/
+	R6 = R6 + R4;		/* we'll use if we find a match*/
+	R3 = ((16 << 8) | 2);	/* Extract mask, two bits at posn 16 */
+
+	R5 = 0;
+.Lisearch:
+
+	R1 = [P0-0x100];	/* Address for this CPLB */
+
+	R0 = [P0++];		/* Info for this CPLB*/
+	CC = BITTST(R0,0);	/* Is the CPLB valid?*/
+	IF !CC JUMP .Lnomatch;	/* Skip it, if not.*/
+	CC = R4 < R1(IU);	/* If fault address less than page start*/
+	IF CC JUMP .Lnomatch;	/* then skip this one.*/
+	R2 = EXTRACT(R0,R3.L) (Z);	/* Get page size*/
+	P1 = R2;
+	P1 = P5 + (P1<<2);	/* index into page-size table*/
+	R2 = [P1];		/* Get the page size*/
+	R1 = R1 + R2;		/* and add to page start, to get page end*/
+	CC = R4 < R1(IU);	/* and see whether fault addr is in page.*/
+	IF !CC R4 = R6;		/* If so, advance the address and finish loop.*/
+	IF !CC JUMP .Lisearch_done;
+.Lnomatch:
+	/* Go around again*/
+	R5 += 1;
+	CC = BITTST(R5, 4);	/* i.e CC = R5 >= 16*/
+	IF !CC JUMP .Lisearch;
+
+.Lisearch_done:
+	I0 = R4;		/* Fault address we'll search for*/
+
+	/* set up pointers */
+	P0.L = LO(ICPLB_DATA0);
+	P0.H = HI(ICPLB_DATA0);
+
+	/* The replacement procedure for ICPLBs */
+
+	P4.L = LO(IMEM_CONTROL);
+	P4.H = HI(IMEM_CONTROL);
+
+	/* Turn off CPLBs while we work, necessary according to HRM before
+	 * modifying CPLB descriptors
+	 */
+	R5 = [P4];		/* Control Register*/
+	BITCLR(R5,ENICPLB_P);
+	CLI R1;
+	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
+	.align 8;
+	[P4] = R5;
+	SSYNC;
+	STI R1;
+
+	R1 = -1;		/* end point comparison */
+	R3 = 16;		/* counter */
+
+	/* Search through CPLBs for first non-locked entry */
+	/* Overwrite it by moving everyone else up by 1 */
+.Licheck_lock:
+	R0 = [P0++];
+	R3 = R3 + R1;
+	CC = R3 == R1;
+	IF CC JUMP .Lall_locked;
+	CC = BITTST(R0, 0);		/* an invalid entry is good */
+	IF !CC JUMP .Lifound_victim;
+	CC = BITTST(R0,1);		/* but a locked entry isn't */
+	IF CC JUMP .Licheck_lock;
+
+.Lifound_victim:
+#ifdef CONFIG_CPLB_INFO
+	R7 = [P0 - 0x104];
+	P2.L = _ipdt_table;
+	P2.H = _ipdt_table;
+	P3.L = _ipdt_swapcount_table;
+	P3.H = _ipdt_swapcount_table;
+	P3 += -4;
+.Licount:
+	R2 = [P2];	/* address from config table */
+	P2 += 8;
+	P3 += 8;
+	CC = R2==-1;
+	IF CC JUMP .Licount_done;
+	CC = R7==R2;
+	IF !CC JUMP .Licount;
+	R7 = [P3];
+	R7 += 1;
+	[P3] = R7;
+	CSYNC;
+.Licount_done:
+#endif
+	LC0=R3;
+	LSETUP(.Lis_move,.Lie_move) LC0;
+.Lis_move:
+	R0 = [P0];
+	[P0 - 4] = R0;
+	R0 = [P0 - 0x100];
+	[P0-0x104] = R0;
+.Lie_move:
+	P0+=4;
+
+	/* Clear ICPLB_DATA15, in case we don't find a replacement
+	 * otherwise, we would have a duplicate entry, and will crash
+	 */
+	R0 = 0;
+	[P0 - 4] = R0;
+
+	/* We've made space in the ICPLB table, so that ICPLB15
+	 * is now free to be overwritten. Next, we have to determine
+	 * which CPLB we need to install, from the configuration
+	 * table. This is a matter of getting the start-of-page
+	 * addresses and page-lengths from the config table, and
+	 * determining whether the fault address falls within that
+	 * range.
+ 	 */
+
+	P2.L = _ipdt_table;
+	P2.H = _ipdt_table;
+#ifdef	CONFIG_CPLB_INFO
+	P3.L = _ipdt_swapcount_table;
+	P3.H = _ipdt_swapcount_table;
+	P3 += -8;
+#endif
+	P0.L = _page_size_table;
+	P0.H = _page_size_table;
+
+	/* Retrieve our fault address (which may have been advanced
+	 * because the faulting instruction crossed a page boundary).
+	 */
+
+	R0 = I0;
+
+	/* An extraction pattern, to get the page-size bits from
+	 * the CPLB data entry. Bits 16-17, so two bits at posn 16.
+	 */
+
+	R1 = ((16<<8)|2);
+.Linext:	R4 = [P2++];	/* address from config table */
+	R2 = [P2++];	/* data from config table */
+#ifdef	CONFIG_CPLB_INFO
+	P3 += 8;
+#endif
+
+	CC = R4 == -1;	/* End of config table*/
+	IF CC JUMP .Lno_page_in_table;
+
+	/* See if failed address > start address */
+	CC = R4 <= R0(IU);
+	IF !CC JUMP .Linext;
+
+	/* extract page size (17:16)*/
+	R3 = EXTRACT(R2, R1.L) (Z);
+
+	/* add page size to addr to get range */
+
+	P5 = R3;
+	P5 = P0 + (P5 << 2);	/* scaled, for int access*/
+	R3 = [P5];
+	R3 = R3 + R4;
+
+	/* See if failed address < (start address + page size) */
+	CC = R0 < R3(IU);
+	IF !CC JUMP .Linext;
+
+	/* We've found a CPLB in the config table that covers
+	 * the faulting address, so install this CPLB into the
+	 * last entry of the table.
+	 */
+
+	P1.L = LO(ICPLB_DATA15);		/* ICPLB_DATA15 */
+	P1.H = HI(ICPLB_DATA15);
+	[P1] = R2;
+	[P1-0x100] = R4;
+#ifdef	CONFIG_CPLB_INFO
+	R3 = [P3];
+	R3 += 1;
+	[P3] = R3;
+#endif
+
+	/* P4 points to IMEM_CONTROL, and R5 contains its old
+	 * value, after we disabled ICPLBS. Re-enable them.
+	 */
+
+	BITSET(R5,ENICPLB_P);
+	CLI R2;
+	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
+	.align 8;
+	[P4] = R5;
+	SSYNC;
+	STI R2;
+
+	( R7:4,P5:3 ) = [SP++];
+	R0 = CPLB_RELOADED;
+	RTS;
+
+/* FAILED CASES*/
+.Lno_page_in_table:
+	R0 = CPLB_NO_ADDR_MATCH;
+	JUMP .Lfail_ret;
+
+.Lall_locked:
+	R0 = CPLB_NO_UNLOCKED;
+	JUMP .Lfail_ret;
+
+.Lprot_violation:
+	R0 = CPLB_PROT_VIOL;
+
+.Lfail_ret:
+	/* Make sure we turn protection/cache back on, even in the failing case */
+	BITSET(R5,ENICPLB_P);
+	CLI R2;
+	SSYNC;          /* SSYNC required before writing to IMEM_CONTROL. */
+	.align 8;
+	[P4] = R5;
+	SSYNC;
+	STI R2;
+
+	( R7:4,P5:3 ) = [SP++];
+	RTS;
+
+.Ldcplb_write:
+
+	/* if a DCPLB is marked as write-back (CPLB_WT==0), and
+	 * it is clean (CPLB_DIRTY==0), then a write to the
+	 * CPLB's page triggers a protection violation. We have to
+	 * mark the CPLB as dirty, to indicate that there are
+	 * pending writes associated with the CPLB.
+	 */
+
+	P4.L = LO(DCPLB_STATUS);
+	P4.H = HI(DCPLB_STATUS);
+	P3.L = LO(DCPLB_DATA0);
+	P3.H = HI(DCPLB_DATA0);
+	R5 = [P4];
+
+	/* A protection violation can be caused by more than just writes
+	 * to a clean WB page, so we have to ensure that:
+	 * - It's a write
+	 * - to a clean WB page
+	 * - and is allowed in the mode the access occurred.
+	 */
+
+	CC = BITTST(R5, 16);	/* ensure it was a write*/
+	IF !CC JUMP .Lprot_violation;
+
+	/* to check the rest, we have to retrieve the DCPLB.*/
+
+	/* The low half of DCPLB_STATUS is a bit mask*/
+
+	R2 = R5.L (Z);	/* indicating which CPLB triggered the event.*/
+	R3 = 30;	/* so we can use this to determine the offset*/
+	R2.L = SIGNBITS R2;
+	R2 = R2.L (Z);	/* into the DCPLB table.*/
+	R3 = R3 - R2;
+	P4 = R3;
+	P3 = P3 + (P4<<2);
+	R3 = [P3];	/* Retrieve the CPLB*/
+
+	/* Now we can check whether it's a clean WB page*/
+
+	CC = BITTST(R3, 14);	/* 0==WB, 1==WT*/
+	IF CC JUMP .Lprot_violation;
+	CC = BITTST(R3, 7);	/* 0 == clean, 1 == dirty*/
+	IF CC JUMP .Lprot_violation;
+
+	/* Check whether the write is allowed in the mode that was active.*/
+
+	R2 = 1<<3;		/* checking write in user mode*/
+	CC = BITTST(R5, 17);	/* 0==was user, 1==was super*/
+	R5 = CC;
+	R2 <<= R5;		/* if was super, check write in super mode*/
+	R2 = R3 & R2;
+	CC = R2 == 0;
+	IF CC JUMP .Lprot_violation;
+
+	/* It's a genuine write-to-clean-page.*/
+
+	BITSET(R3, 7);		/* mark as dirty*/
+	[P3] = R3;		/* and write back.*/
+	NOP;
+	CSYNC;
+	( R7:4,P5:3 ) = [SP++];
+	R0 = CPLB_RELOADED;
+	RTS;
+
+.Ldcplb_miss_compare:
+
+	/* Data CPLB Miss event. We need to choose a CPLB to
+	 * evict, and then locate a new CPLB to install from the
+	 * config table, that covers the faulting address.
+	 */
+
+	P1.L = LO(DCPLB_DATA15);
+	P1.H = HI(DCPLB_DATA15);
+
+	P4.L = LO(DCPLB_FAULT_ADDR);
+	P4.H = HI(DCPLB_FAULT_ADDR);
+	R4 = [P4];
+	I0 = R4;
+
+	/* The replacement procedure for DCPLBs*/
+
+	R6 = R1;	/* Save for later*/
+
+	/* Turn off CPLBs while we work.*/
+	P4.L = LO(DMEM_CONTROL);
+	P4.H = HI(DMEM_CONTROL);
+	R5 = [P4];
+	BITCLR(R5,ENDCPLB_P);
+	CLI R0;
+	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
+	.align 8;
+	[P4] = R5;
+	SSYNC;
+	STI R0;
+
+	/* Start looking for a CPLB to evict. Our order of preference
+	 * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs
+	 * are no good.
+	 */
+
+	I1.L = LO(DCPLB_DATA0);
+	I1.H = HI(DCPLB_DATA0);
+	P1 = 2;
+	P2 = 16;
+	I2.L = _dcplb_preference;
+	I2.H = _dcplb_preference;
+	LSETUP(.Lsdsearch1, .Ledsearch1) LC0 = P1;
+.Lsdsearch1:
+	R0 = [I2++];		/* Get the bits we're interested in*/
+	P0 = I1;		/* Go back to start of table*/
+	LSETUP (.Lsdsearch2, .Ledsearch2) LC1 = P2;
+.Lsdsearch2:
+	R1 = [P0++];		/* Fetch each installed CPLB in turn*/
+	R2 = R1 & R0;		/* and test for interesting bits.*/
+	CC = R2 == 0;		/* If none are set, it'll do.*/
+	IF !CC JUMP .Lskip_stack_check;
+
+	R2 = [P0 - 0x104]; 	/* R2 - PageStart */
+	P3.L = _page_size_table; /* retrieve end address */
+	P3.H = _page_size_table; /* retrieve end address */
+	R3 = 0x1002;		/* 16th - position, 2 bits -length */
+#if ANOMALY_05000209
+	nop;			/* Anomaly 05000209 */
+#endif
+	R7 = EXTRACT(R1,R3.l);
+	R7 = R7 << 2;		/* Page size index offset */
+	P5 = R7;
+	P3 = P3 + P5;
+	R7 = [P3];		/* page size in bytes */
+
+	R7 = R2 + R7;		/* R7 - PageEnd */
+	R4 = SP; 		/* Test SP is in range */
+
+	CC = R7 < R4;		/* if PageEnd < SP */
+	IF CC JUMP .Ldfound_victim;
+	R3 = 0x284;		/* stack length from start of trap till
+				 * the point.
+				 * 20 stack locations for future modifications
+				 */
+	R4 = R4 + R3;
+	CC = R4 < R2;		/* if SP + stacklen < PageStart */
+	IF CC JUMP .Ldfound_victim;
+.Lskip_stack_check:
+
+.Ledsearch2: NOP;
+.Ledsearch1: NOP;
+
+	/* If we got here, we didn't find a DCPLB we considered
+	 * replacable, which means all of them were locked.
+	 */
+
+	JUMP .Lall_locked;
+.Ldfound_victim:
+
+#ifdef CONFIG_CPLB_INFO
+	R7 = [P0 - 0x104];
+	P2.L = _dpdt_table;
+	P2.H = _dpdt_table;
+	P3.L = _dpdt_swapcount_table;
+	P3.H = _dpdt_swapcount_table;
+	P3 += -4;
+.Ldicount:
+	R2 = [P2];
+	P2 += 8;
+	P3 += 8;
+	CC = R2==-1;
+	IF CC JUMP .Ldicount_done;
+	CC = R7==R2;
+	IF !CC JUMP .Ldicount;
+	R7 = [P3];
+	R7 += 1;
+	[P3] = R7;
+.Ldicount_done:
+#endif
+
+	/* Clean down the hardware loops*/
+	R2 = 0;
+	LC1 = R2;
+	LC0 = R2;
+
+	/* There's a suitable victim in [P0-4] (because we've
+	 * advanced already).
+	 */
+
+.LDdoverwrite:
+
+	/* [P0-4] is a suitable victim CPLB, so we want to
+	 * overwrite it by moving all the following CPLBs
+	 * one space closer to the start.
+	 */
+
+	R1.L = LO(DCPLB_DATA16);		/* DCPLB_DATA15 + 4 */
+	R1.H = HI(DCPLB_DATA16);
+	R0 = P0;
+
+	/* If the victim happens to be in DCPLB15,
+	 * we don't need to move anything.
+	 */
+
+	CC = R1 == R0;
+	IF CC JUMP .Lde_moved;
+	R1 = R1 - R0;
+	R1 >>= 2;
+	P1 = R1;
+	LSETUP(.Lds_move, .Lde_move) LC0=P1;
+.Lds_move:
+	R0 = [P0++];	/* move data */
+	[P0 - 8] = R0;
+	R0 = [P0-0x104]	/* move address */
+.Lde_move:
+	 [P0-0x108] = R0;
+
+.Lde_moved:
+	NOP;
+
+	/* Clear DCPLB_DATA15, in case we don't find a replacement
+	 * otherwise, we would have a duplicate entry, and will crash
+	 */
+	R0 = 0;
+	[P0 - 0x4] = R0;
+
+	/* We've now made space in DCPLB15 for the new CPLB to be
+	 * installed. The next stage is to locate a CPLB in the
+	 * config table that covers the faulting address.
+	 */
+
+	R0 = I0;		/* Our faulting address */
+
+	P2.L = _dpdt_table;
+	P2.H = _dpdt_table;
+#ifdef	CONFIG_CPLB_INFO
+	P3.L = _dpdt_swapcount_table;
+	P3.H = _dpdt_swapcount_table;
+	P3 += -8;
+#endif
+
+	P1.L = _page_size_table;
+	P1.H = _page_size_table;
+
+	/* An extraction pattern, to retrieve bits 17:16.*/
+
+	R1 = (16<<8)|2;
+.Ldnext:	R4 = [P2++];	/* address */
+	R2 = [P2++];	/* data */
+#ifdef	CONFIG_CPLB_INFO
+	P3 += 8;
+#endif
+
+	CC = R4 == -1;
+	IF CC JUMP .Lno_page_in_table;
+
+	/* See if failed address > start address */
+	CC = R4 <= R0(IU);
+	IF !CC JUMP .Ldnext;
+
+	/* extract page size (17:16)*/
+	R3 = EXTRACT(R2, R1.L) (Z);
+
+	/* add page size to addr to get range */
+
+	P5 = R3;
+	P5 = P1 + (P5 << 2);
+	R3 = [P5];
+	R3 = R3 + R4;
+
+	/* See if failed address < (start address + page size) */
+	CC = R0 < R3(IU);
+	IF !CC JUMP .Ldnext;
+
+	/* We've found the CPLB that should be installed, so
+	 * write it into CPLB15, masking off any caching bits
+	 * if necessary.
+	 */
+
+	P1.L = LO(DCPLB_DATA15);
+	P1.H = HI(DCPLB_DATA15);
+
+	/* If the DCPLB has cache bits set, but caching hasn't
+	 * been enabled, then we want to mask off the cache-in-L1
+	 * bit before installing. Moreover, if caching is off, we
+	 * also want to ensure that the DCPLB has WT mode set, rather
+	 * than WB, since WB pages still trigger first-write exceptions
+	 * even when not caching is off, and the page isn't marked as
+	 * cachable. Finally, we could mark the page as clean, not dirty,
+	 * but we choose to leave that decision to the user; if the user
+	 * chooses to have a CPLB pre-defined as dirty, then they always
+	 * pay the cost of flushing during eviction, but don't pay the
+	 * cost of first-write exceptions to mark the page as dirty.
+	 */
+
+#ifdef CONFIG_BFIN_WT
+	BITSET(R6, 14);		/* Set WT*/
+#endif
+
+	[P1] = R2;
+	[P1-0x100] = R4;
+#ifdef	CONFIG_CPLB_INFO
+	R3 = [P3];
+	R3 += 1;
+	[P3] = R3;
+#endif
+
+	/* We've installed the CPLB, so re-enable CPLBs. P4
+	 * points to DMEM_CONTROL, and R5 is the value we
+	 * last wrote to it, when we were disabling CPLBs.
+	 */
+
+	BITSET(R5,ENDCPLB_P);
+	CLI R2;
+	.align 8;
+	[P4] = R5;
+	SSYNC;
+	STI R2;
+
+	( R7:4,P5:3 ) = [SP++];
+	R0 = CPLB_RELOADED;
+	RTS;
+ENDPROC(_cplb_mgr)
+
+.data
+.align 4;
+_page_size_table:
+.byte4	0x00000400;	/* 1K */
+.byte4	0x00001000;	/* 4K */
+.byte4	0x00100000;	/* 1M */
+.byte4	0x00400000;	/* 4M */
+
+.align 4;
+_dcplb_preference:
+.byte4	0x00000001;	/* valid bit */
+.byte4	0x00000002;	/* lock bit */