summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf518
diff options
context:
space:
mode:
authorMike Frysinger <vapier@gentoo.org>2009-06-13 06:37:14 -0400
committerMike Frysinger <vapier@gentoo.org>2009-06-22 21:15:38 -0400
commita200ad22bb15fe01cf222fa631687876baad5e01 (patch)
treedd7c7e85a7ea56ff9a694348a68f66bb2d8a7c92 /arch/blackfin/mach-bf518
parent4d5e6fd42c137dad3b1aced073c6fcb494a8e507 (diff)
Blackfin: update anomaly lists
Update anomaly headers to match latest released anomaly sheets. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Diffstat (limited to 'arch/blackfin/mach-bf518')
-rw-r--r--arch/blackfin/mach-bf518/include/mach/anomaly.h37
1 files changed, 25 insertions, 12 deletions
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index b69bd9af38d..426e064062a 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -7,7 +7,7 @@
*/
/* This file should be up to date with:
- * - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
+ * - Revision C, 06/12/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
*/
/* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */
@@ -18,7 +18,7 @@
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
@@ -45,29 +45,31 @@
/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
#define ANOMALY_05000426 (1)
/* Software System Reset Corrupts PLL_LOCKCNT Register */
-#define ANOMALY_05000430 (1)
+#define ANOMALY_05000430 (__SILICON_REVISION__ < 1)
/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
#define ANOMALY_05000431 (1)
/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
-#define ANOMALY_05000435 (1)
+#define ANOMALY_05000435 (__SILICON_REVISION__ < 1)
/* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */
-#define ANOMALY_05000438 (1)
+#define ANOMALY_05000438 (__SILICON_REVISION__ < 1)
/* Preboot Cannot be Used to Alter the PLL_DIV Register */
-#define ANOMALY_05000439 (1)
+#define ANOMALY_05000439 (__SILICON_REVISION__ < 1)
/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
-#define ANOMALY_05000440 (1)
+#define ANOMALY_05000440 (__SILICON_REVISION__ < 1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
/* Incorrect L1 Instruction Bank B Memory Map Location */
-#define ANOMALY_05000444 (1)
+#define ANOMALY_05000444 (__SILICON_REVISION__ < 1)
/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
-#define ANOMALY_05000452 (1)
+#define ANOMALY_05000452 (__SILICON_REVISION__ < 1)
/* PWM_TRIPB Signal Not Available on PG10 */
-#define ANOMALY_05000453 (1)
+#define ANOMALY_05000453 (__SILICON_REVISION__ < 1)
/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
-#define ANOMALY_05000455 (1)
-/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000455 (__SILICON_REVISION__ < 1)
+/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
@@ -78,24 +80,30 @@
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000244 (0)
#define ANOMALY_05000248 (0)
#define ANOMALY_05000250 (0)
+#define ANOMALY_05000257 (0)
#define ANOMALY_05000261 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000274 (0)
#define ANOMALY_05000278 (0)
+#define ANOMALY_05000281 (0)
+#define ANOMALY_05000283 (0)
#define ANOMALY_05000285 (0)
#define ANOMALY_05000287 (0)
#define ANOMALY_05000301 (0)
@@ -103,10 +111,13 @@
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
+#define ANOMALY_05000315 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (0)
+#define ANOMALY_05000357 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000371 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (0)
#define ANOMALY_05000389 (0)
@@ -117,5 +128,7 @@
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
#endif