Blackfin arch: update platform driver resource information to all board files

Signed-off-by: Bryan Wu <bryan.wu@analog.com>

1 files changed, 82 insertions, 9 deletions

diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 0000b8f1239..5c1e35d3c01 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -35,7 +35,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/usb_isp1362.h>
+#include <linux/pata_platform.h>
 #include <linux/irq.h>
+#include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 
 /*
@@ -50,6 +52,12 @@ static struct platform_device rtc_device = {
 };
 #endif
 
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+	.name = "bfin-adv7393",
+};
+#endif
+
 /*
  *  USB-LAN EzExtender board
  *  Driver needs to know address, irq and flag pin.
@@ -131,7 +139,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		/* the modalias must be the same as spi device driver name */
 		.modalias = "m25p80", /* Name of spi_driver for this device */
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 1, /* Framework bus number */
+		.bus_num = 0, /* Framework bus number */
 		.chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
 		.platform_data = &bfin_spi_flash_data,
 		.controller_data = &spi_flash_chip_info,
@@ -143,7 +151,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 1, /* Framework bus number */
+		.bus_num = 0, /* Framework bus number */
 		.chip_select = 1, /* Framework chip select. */
 		.platform_data = NULL, /* No spi_driver specific config */
 		.controller_data = &spi_adc_chip_info,
@@ -154,24 +162,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	{
 		.modalias = "ad1836-spi",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 1,
+		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
 };
 
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
 /* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
 	.num_chipselect = 8,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 };
 
-static struct platform_device spi_bfin_master_device = {
-	.name = "bfin-spi-master",
-	.id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
 	.dev = {
-		.platform_data = &spi_bfin_master_info, /* Passed to driver */
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
 	},
 };
 #endif  /* spi master and devices */
@@ -193,13 +217,54 @@ static struct platform_device bfin_uart_device = {
 };
 #endif
 
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT	55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 1,
+	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x20314020,
+		.end = 0x2031403F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2031401C,
+		.end = 0x2031401F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
 static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 	&smc91x_device,
 #endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	&spi_bfin_master_device,
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+	&bfin_fb_adv7393_device,
 #endif
 
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
@@ -209,6 +274,10 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 	&bfin_uart_device,
 #endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	&bfin_pata_device,
+#endif
 };
 
 static int __init ezkit_init(void)
@@ -218,6 +287,10 @@ static int __init ezkit_init(void)
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
 	return 0;
 }