Merge branch 'master' into for-next

Conflicts:
	arch/arm/mach-omap1/board-nokia770.c

8 files changed, 45 insertions, 424 deletions

diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 7d08c752449..4070079e2c0 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -5,7 +5,7 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
@@ -28,7 +28,7 @@
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */
+/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */
 #define ANOMALY_05000220 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
@@ -210,10 +210,16 @@
 #define ANOMALY_05000473 (1)
 /* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */
 #define ANOMALY_05000474 (1)
-/* Core Hang With L2/L3 Configured in Writeback Cache Mode */
-#define ANOMALY_05000475 (1)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */
+#define ANOMALY_05000483 (1)
+/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
+#define ANOMALY_05000485 (__SILICON_REVISION__ >= 2)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -229,6 +235,7 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
@@ -263,5 +270,6 @@
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000475 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
index 32f71e6a7c1..ea3ec4ea9e2 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
@@ -301,10 +301,10 @@
 
 /* DMAC0 Registers */
 
-#define bfin_read_DMAC0_TCPER()		bfin_read16(DMAC0_TCPER)
-#define bfin_write_DMAC0_TCPER(val)	bfin_write16(DMAC0_TCPER, val)
-#define bfin_read_DMAC0_TCCNT()		bfin_read16(DMAC0_TCCNT)
-#define bfin_write_DMAC0_TCCNT(val)	bfin_write16(DMAC0_TCCNT, val)
+#define bfin_read_DMAC0_TC_PER()		bfin_read16(DMAC0_TC_PER)
+#define bfin_write_DMAC0_TC_PER(val)	bfin_write16(DMAC0_TC_PER, val)
+#define bfin_read_DMAC0_TC_CNT()		bfin_read16(DMAC0_TC_CNT)
+#define bfin_write_DMAC0_TC_CNT(val)	bfin_write16(DMAC0_TC_CNT, val)
 
 /* DMA Channel 0 Registers */
 
@@ -1155,10 +1155,10 @@
 
 /* DMAC1 Registers */
 
-#define bfin_read_DMAC1_TCPER()			bfin_read16(DMAC1_TCPER)
-#define bfin_write_DMAC1_TCPER(val)		bfin_write16(DMAC1_TCPER, val)
-#define bfin_read_DMAC1_TCCNT()			bfin_read16(DMAC1_TCCNT)
-#define bfin_write_DMAC1_TCCNT(val)		bfin_write16(DMAC1_TCCNT, val)
+#define bfin_read_DMAC1_TC_PER()			bfin_read16(DMAC1_TC_PER)
+#define bfin_write_DMAC1_TC_PER(val)		bfin_write16(DMAC1_TC_PER, val)
+#define bfin_read_DMAC1_TC_CNT()			bfin_read16(DMAC1_TC_CNT)
+#define bfin_write_DMAC1_TC_CNT(val)		bfin_write16(DMAC1_TC_CNT, val)
 
 /* DMA Channel 12 Registers */
 
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h
index d3bc6d1df54..abf5f750dd8 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h
@@ -366,136 +366,6 @@
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
 
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index f916c52a148..e2771094de0 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -60,15 +60,15 @@
 #define                     TWI1_REGBASE  0xffc02200
 #define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
 #define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
-#define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
+#define                   TWI1_SLAVE_CTL  0xffc02208   /* TWI Slave Mode Control Register */
 #define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
 #define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
-#define                 TWI1_MASTER_CTRL  0xffc02214   /* TWI Master Mode Control Register */
+#define                  TWI1_MASTER_CTL  0xffc02214   /* TWI Master Mode Control Register */
 #define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
 #define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
 #define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
 #define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
-#define                   TWI1_FIFO_CTRL  0xffc02228   /* TWI FIFO Control Register */
+#define                    TWI1_FIFO_CTL  0xffc02228   /* TWI FIFO Control Register */
 #define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
 #define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
 #define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 72c343646b2..be21ba5b3aa 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -99,15 +99,15 @@
 #define                     TWI1_REGBASE  0xffc02200
 #define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
 #define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
-#define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
+#define                   TWI1_SLAVE_CTL  0xffc02208   /* TWI Slave Mode Control Register */
 #define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
 #define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
-#define                 TWI1_MASTER_CTRL  0xffc02214   /* TWI Master Mode Control Register */
+#define                  TWI1_MASTER_CTL  0xffc02214   /* TWI Master Mode Control Register */
 #define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
 #define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
 #define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
 #define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
-#define                   TWI1_FIFO_CTRL  0xffc02228   /* TWI FIFO Control Register */
+#define                    TWI1_FIFO_CTL  0xffc02228   /* TWI FIFO Control Register */
 #define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
 #define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
 #define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
@@ -646,136 +646,6 @@
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
 
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index 0ed06c2366f..95ff44601fd 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -105,15 +105,15 @@
 #define                     TWI0_REGBASE  0xffc00700
 #define                      TWI0_CLKDIV  0xffc00700   /* Clock Divider Register */
 #define                     TWI0_CONTROL  0xffc00704   /* TWI Control Register */
-#define                  TWI0_SLAVE_CTRL  0xffc00708   /* TWI Slave Mode Control Register */
+#define                   TWI0_SLAVE_CTL  0xffc00708   /* TWI Slave Mode Control Register */
 #define                  TWI0_SLAVE_STAT  0xffc0070c   /* TWI Slave Mode Status Register */
 #define                  TWI0_SLAVE_ADDR  0xffc00710   /* TWI Slave Mode Address Register */
-#define                 TWI0_MASTER_CTRL  0xffc00714   /* TWI Master Mode Control Register */
+#define                  TWI0_MASTER_CTL  0xffc00714   /* TWI Master Mode Control Register */
 #define                 TWI0_MASTER_STAT  0xffc00718   /* TWI Master Mode Status Register */
 #define                 TWI0_MASTER_ADDR  0xffc0071c   /* TWI Master Mode Address Register */
 #define                    TWI0_INT_STAT  0xffc00720   /* TWI Interrupt Status Register */
 #define                    TWI0_INT_MASK  0xffc00724   /* TWI Interrupt Mask Register */
-#define                   TWI0_FIFO_CTRL  0xffc00728   /* TWI FIFO Control Register */
+#define                    TWI0_FIFO_CTL  0xffc00728   /* TWI FIFO Control Register */
 #define                   TWI0_FIFO_STAT  0xffc0072c   /* TWI FIFO Status Register */
 #define                   TWI0_XMT_DATA8  0xffc00780   /* TWI FIFO Transmit Data Single Byte Register */
 #define                  TWI0_XMT_DATA16  0xffc00784   /* TWI FIFO Transmit Data Double Byte Register */
@@ -198,8 +198,8 @@
 
 /* DMAC0 Registers */
 
-#define                      DMAC0_TCPER  0xffc00b0c   /* DMA Controller 0 Traffic Control Periods Register */
-#define                      DMAC0_TCCNT  0xffc00b10   /* DMA Controller 0 Current Counts Register */
+#define                     DMAC0_TC_PER  0xffc00b0c   /* DMA Controller 0 Traffic Control Periods Register */
+#define                     DMAC0_TC_CNT  0xffc00b10   /* DMA Controller 0 Current Counts Register */
 
 /* DMA Channel 0 Registers */
 
@@ -688,8 +688,8 @@
 
 /* DMAC1 Registers */
 
-#define                      DMAC1_TCPER  0xffc01b0c   /* DMA Controller 1 Traffic Control Periods Register */
-#define                      DMAC1_TCCNT  0xffc01b10   /* DMA Controller 1 Current Counts Register */
+#define                     DMAC1_TC_PER  0xffc01b0c   /* DMA Controller 1 Traffic Control Periods Register */
+#define                     DMAC1_TC_CNT  0xffc01b10   /* DMA Controller 1 Current Counts Register */
 
 /* DMA Channel 12 Registers */
 
@@ -1958,57 +1958,6 @@
 #define                     TRUN6  0x40000000 /* Timer 6 Slave Enable Status */
 #define                     TRUN7  0x80000000 /* Timer 7 Slave Enable Status */
 
-/* Bit masks for CNT_CONFIG */
-
-#define                      CNTE  0x1        /* Counter Enable */
-#define                      DEBE  0x2        /* Debounce Enable */
-#define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
-#define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
-#define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
-#define                   CNTMODE  0x700      /* Counter Operating Mode */
-#define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
-#define                   BNDMODE  0x3000     /* Boundary register Mode */
-#define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
-
-/* Bit masks for CNT_IMASK */
-
-#define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
-#define                      UCIE  0x2        /* Up count Interrupt Enable */
-#define                      DCIE  0x4        /* Down count Interrupt Enable */
-#define                    MINCIE  0x8        /* Min Count Interrupt Enable */
-#define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
-#define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
-#define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
-#define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
-#define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
-#define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
-#define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
-
-/* Bit masks for CNT_STATUS */
-
-#define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
-#define                      UCII  0x2        /* Up count Interrupt Identifier */
-#define                      DCII  0x4        /* Down count Interrupt Identifier */
-#define                    MINCII  0x8        /* Min Count Interrupt Identifier */
-#define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
-#define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
-#define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
-#define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
-#define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
-#define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
-#define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
-
-/* Bit masks for CNT_COMMAND */
-
-#define                    W1LCNT  0xf        /* Load Counter Register */
-#define                    W1LMIN  0xf0       /* Load Min Register */
-#define                    W1LMAX  0xf00      /* Load Max Register */
-#define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
-
-/* Bit masks for CNT_DEBOUNCE */
-
-#define                 DPRESCALE  0xf        /* Load Counter Register */
-
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
@@ -2044,66 +1993,6 @@
 #define                RESET_WDOG 0x4000       /* SW Reset Generated By Watchdog Timer */
 #define            RESET_SOFTWARE 0x8000       /* SW Reset Occurred Since Last Read Of SWRST */
 
-/* Bit masks for NFC_CTL */
-
-#define                    WR_DLY  0xf        /* Write Strobe Delay */
-#define                    RD_DLY  0xf0       /* Read Strobe Delay */
-#define                    NWIDTH  0x100      /* NAND Data Width */
-#define                   PG_SIZE  0x200      /* Page Size */
-
-/* Bit masks for NFC_STAT */
-
-#define                     NBUSY  0x1        /* Not Busy */
-#define                   WB_FULL  0x2        /* Write Buffer Full */
-#define                PG_WR_STAT  0x4        /* Page Write Pending */
-#define                PG_RD_STAT  0x8        /* Page Read Pending */
-#define                  WB_EMPTY  0x10       /* Write Buffer Empty */
-
-/* Bit masks for NFC_IRQSTAT */
-
-#define                  NBUSYIRQ  0x1        /* Not Busy IRQ */
-#define                    WB_OVF  0x2        /* Write Buffer Overflow */
-#define                   WB_EDGE  0x4        /* Write Buffer Edge Detect */
-#define                    RD_RDY  0x8        /* Read Data Ready */
-#define                   WR_DONE  0x10       /* Page Write Done */
-
-/* Bit masks for NFC_IRQMASK */
-
-#define              MASK_BUSYIRQ  0x1        /* Mask Not Busy IRQ */
-#define                MASK_WBOVF  0x2        /* Mask Write Buffer Overflow */
-#define              MASK_WBEMPTY  0x4        /* Mask Write Buffer Empty */
-#define                MASK_RDRDY  0x8        /* Mask Read Data Ready */
-#define               MASK_WRDONE  0x10       /* Mask Write Done */
-
-/* Bit masks for NFC_RST */
-
-#define                   ECC_RST  0x1        /* ECC (and NFC counters) Reset */
-
-/* Bit masks for NFC_PGCTL */
-
-#define               PG_RD_START  0x1        /* Page Read Start */
-#define               PG_WR_START  0x2        /* Page Write Start */
-
-/* Bit masks for NFC_ECC0 */
-
-#define                      ECC0  0x7ff      /* Parity Calculation Result0 */
-
-/* Bit masks for NFC_ECC1 */
-
-#define                      ECC1  0x7ff      /* Parity Calculation Result1 */
-
-/* Bit masks for NFC_ECC2 */
-
-#define                      ECC2  0x7ff      /* Parity Calculation Result2 */
-
-/* Bit masks for NFC_ECC3 */
-
-#define                      ECC3  0x7ff      /* Parity Calculation Result3 */
-
-/* Bit masks for NFC_COUNT */
-
-#define                    ECCCNT  0x3ff      /* Transfer Count */
-
 /* Bit masks for EPPIx_STATUS */
 
 #define                 CFIFO_ERR  0x1        /* Chroma FIFO Error */
@@ -2472,33 +2361,6 @@
 #define BCODE_QUICKBOOT 0x0020  /* always perform quick boot */
 #define BCODE_NOBOOT    0x0030  /* always perform full boot */
 
-/* CNT_COMMAND bit field options */
-
-#define W1LCNT_ZERO   0x0001   /* write 1 to load CNT_COUNTER with zero */
-#define W1LCNT_MIN    0x0004   /* write 1 to load CNT_COUNTER from CNT_MIN */
-#define W1LCNT_MAX    0x0008   /* write 1 to load CNT_COUNTER from CNT_MAX */
-
-#define W1LMIN_ZERO   0x0010   /* write 1 to load CNT_MIN with zero */
-#define W1LMIN_CNT    0x0020   /* write 1 to load CNT_MIN from CNT_COUNTER */
-#define W1LMIN_MAX    0x0080   /* write 1 to load CNT_MIN from CNT_MAX */
-
-#define W1LMAX_ZERO   0x0100   /* write 1 to load CNT_MAX with zero */
-#define W1LMAX_CNT    0x0200   /* write 1 to load CNT_MAX from CNT_COUNTER */
-#define W1LMAX_MIN    0x0400   /* write 1 to load CNT_MAX from CNT_MIN */
-
-/* CNT_CONFIG bit field options */
-
-#define CNTMODE_QUADENC  0x0000  /* quadrature encoder mode */
-#define CNTMODE_BINENC   0x0100  /* binary encoder mode */
-#define CNTMODE_UDCNT    0x0200  /* up/down counter mode */
-#define CNTMODE_DIRCNT   0x0400  /* direction counter mode */
-#define CNTMODE_DIRTMR   0x0500  /* direction timer mode */
-
-#define BNDMODE_COMP     0x0000  /* boundary compare mode */
-#define BNDMODE_ZERO     0x1000  /* boundary compare and zero mode */
-#define BNDMODE_CAPT     0x2000  /* boundary capture mode */
-#define BNDMODE_AEXT     0x3000  /* boundary auto-extend mode */
-
 /* TMODE in TIMERx_CONFIG bit field options */
 
 #define PWM_OUT  0x0001
diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h
index 850e39d193e..28037e33196 100644
--- a/arch/blackfin/mach-bf548/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf548/include/mach/gpio.h
@@ -3,6 +3,10 @@
  * Licensed under the GPL-2 or later.
  */
 
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
 #define GPIO_PA0	0
 #define GPIO_PA1	1
 #define GPIO_PA2	2
@@ -166,6 +170,8 @@
 
 #define MAX_BLACKFIN_GPIOS 160
 
+#ifndef __ASSEMBLY__
+
 struct gpio_port_t {
 	unsigned short port_fer;
 	unsigned short dummy1;
@@ -191,3 +197,7 @@ struct gpio_port_s {
 	unsigned short inen;
 	unsigned int mux;
 };
+
+#endif
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
index 89ad6a88636..e2224620273 100644
--- a/arch/blackfin/mach-bf548/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
 
 #define P_SPORT2_TFS	(P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0))
 #define P_SPORT2_DTSEC	(P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0))
@@ -131,6 +131,7 @@
 #define P_KEY_COL2	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
 #define P_KEY_COL3	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
 
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PE4
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 #define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
 #define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))