bf60x: update bf60x anomaly list.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

1 files changed, 56 insertions, 88 deletions

diff --git a/arch/blackfin/mach-bf609/include/mach/anomaly.h b/arch/blackfin/mach-bf609/include/mach/anomaly.h
index bdd39aefb56..13ed8ad7e58 100644
--- a/arch/blackfin/mach-bf609/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf609/include/mach/anomaly.h
@@ -5,126 +5,94 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2011 Analog Devices Inc.
+ * Copyright 2004-2012 Analog Devices Inc.
  * Licensed under the Clear BSD license.
  */
 
 /* This file should be up to date with:
+ *  - Revision A, 15/06/2012; ADSP-BF609 Blackfin Processor Anomaly List
  */
 
 #if __SILICON_REVISION__ < 0
-# error will not work on BF506 silicon version
+# error will not work on BF609 silicon version
 #endif
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
-#define ANOMALY_05000074 (1)
-/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
-#define ANOMALY_05000119 (1)
-/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
-#define ANOMALY_05000122 (1)
-/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
-#define ANOMALY_05000245 (1)
-/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
-#define ANOMALY_05000254 (1)
-/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
-#define ANOMALY_05000265 (1)
-/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
-#define ANOMALY_05000310 (1)
-/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
-#define ANOMALY_05000366 (1)
-/* Speculative Fetches Can Cause Undesired External FIFO Operations */
-#define ANOMALY_05000416 (1)
-/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
-#define ANOMALY_05000426 (1)
+/* TRU_STAT.ADDRERR and TRU_ERRADDR.ADDR May Not Reflect the Correct Status */
+#define ANOMALY_16000003 (1)
+/* The EPPI Data Enable (DEN) Signal is Not Functional */
+#define ANOMALY_16000004 (1)
+/* Using L1 Instruction Cache with Parity Enabled is Unreliable */
+#define ANOMALY_16000005 (1)
+/* SEQSTAT.SYSNMI Clears Upon Entering the NMI ISR */
+#define ANOMALY_16000006 (1)
+/* DDR2 Memory Reads May Fail Intermittently */
+#define ANOMALY_16000007 (1)
+/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
+#define ANOMALY_16000008 (1)
+/* TestSET Instruction Cannot Be Interrupted */
+#define ANOMALY_16000009 (1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
-#define ANOMALY_05000443 (1)
-/* UART IrDA Receiver Fails on Extended Bit Pulses */
-#define ANOMALY_05000447 (1)
+#define ANOMALY_16000010 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
-#define ANOMALY_05000461 (1)
-/* PLL Latches Incorrect Settings During Reset */
-#define ANOMALY_05000469 (1)
-/* Incorrect Default MSEL Value in PLL_CTL */
-#define ANOMALY_05000472 (1)
-/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
-#define ANOMALY_05000473 (1)
-/* TESTSET Instruction Cannot Be Interrupted */
-#define ANOMALY_05000477 (1)
-/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
-#define ANOMALY_05000481 (1)
-/* IFLUSH sucks at life */
-#define ANOMALY_05000491 (1)
-/* Tempopary anomaly ID for data loss in MMR read operation if interrupted */
-#define ANOMALY_05001001 (__SILICON_REVISION__ < 1)
+#define ANOMALY_16000011 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_16000012 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_16000013 (1)
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_16000014 (1)
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_16000015 (1)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_16000017 (1)
+/* RSI Boot Cleanup Routine Does Not Clear Registers */
+#define ANOMALY_16000018 (1)
+/* SPI Master Boot Device Auto-detection Frequency is Set Incorrectly */
+#define ANOMALY_16000019 (1)
+/* rom_SysControl() Fails to Set DDR0_CTL.INIT for Wakeup From Hibernate */
+#define ANOMALY_16000020 (1)
+/* rom_SysControl() Fails to Save and Restore DDR0_PHYCTL3 for Hibernate/Wakeup Sequence */
+#define ANOMALY_16000021 (1)
+/* Boot Code Fails to Enable Parity Fault Detection */
+#define ANOMALY_16000022 (1)
+/* USB DMA interrupt status do not show the DMA channel interrupt in the DMA ISR */
+#define ANOMALY_16000027 (1)
+/* Interrupted Core Reads of MMRs May Cause Data Loss */
+#define ANOMALY_16000030 (1)
 
 /* Anomalies that don't exist on this proc */
-#define ANOMALY_05000099 (0)
-#define ANOMALY_05000120 (0)
-#define ANOMALY_05000125 (0)
-#define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
-#define ANOMALY_05000171 (0)
-#define ANOMALY_05000179 (0)
-#define ANOMALY_05000182 (0)
-#define ANOMALY_05000183 (0)
 #define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
-#define ANOMALY_05000202 (0)
-#define ANOMALY_05000215 (0)
-#define ANOMALY_05000219 (0)
-#define ANOMALY_05000220 (0)
-#define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
-#define ANOMALY_05000233 (0)
-#define ANOMALY_05000234 (0)
-#define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
-#define ANOMALY_05000248 (0)
-#define ANOMALY_05000250 (0)
-#define ANOMALY_05000257 (0)
-#define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
-#define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
 #define ANOMALY_05000281 (0)
-#define ANOMALY_05000283 (0)
-#define ANOMALY_05000285 (0)
 #define ANOMALY_05000287 (0)
-#define ANOMALY_05000301 (0)
-#define ANOMALY_05000305 (0)
-#define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
-#define ANOMALY_05000315 (0)
 #define ANOMALY_05000323 (0)
-#define ANOMALY_05000353 (1)
-#define ANOMALY_05000357 (0)
-#define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
-#define ANOMALY_05000364 (0)
-#define ANOMALY_05000371 (0)
-#define ANOMALY_05000380 (0)
-#define ANOMALY_05000386 (0)
-#define ANOMALY_05000389 (0)
-#define ANOMALY_05000400 (0)
-#define ANOMALY_05000402 (0)
-#define ANOMALY_05000412 (0)
-#define ANOMALY_05000432 (0)
-#define ANOMALY_05000440 (0)
-#define ANOMALY_05000448 (0)
-#define ANOMALY_05000456 (0)
-#define ANOMALY_05000450 (0)
-#define ANOMALY_05000465 (0)
-#define ANOMALY_05000467 (0)
-#define ANOMALY_05000474 (0)
-#define ANOMALY_05000475 (0)
 #define ANOMALY_05000480 (0)
-#define ANOMALY_05000485 (0)
+#define ANOMALY_05000481 (1)
+
+/* Reuse BF5xx anomalies IDs for the same anomaly in BF60x */
+#define ANOMALY_05000491 ANOMALY_16000008
+#define ANOMALY_05000477 ANOMALY_16000009
+#define ANOMALY_05000443 ANOMALY_16000010
+#define ANOMALY_05000461 ANOMALY_16000011
+#define ANOMALY_05000426 ANOMALY_16000012
+#define ANOMALY_05000310 ANOMALY_16000013
+#define ANOMALY_05000245 ANOMALY_16000014
+#define ANOMALY_05000074 ANOMALY_16000015
+#define ANOMALY_05000416 ANOMALY_16000017
+
 
 #endif