tty: Blackin CTS/RTS

Both software emulated and hardware based CTS and RTS are enabled in
serial driver.

The CTS RTS PIN connection on BF548 UART port is defined as a modem
device not as a host device.  In order to test it under Linux, please
nake a cross UART cable to exchange CTS and RTS signal.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 files changed, 72 insertions, 58 deletions

diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index e21c1c3e4ec..0fb2ce5d840 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -53,9 +53,9 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
-#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
-#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
 #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
 
@@ -87,6 +87,7 @@
 struct bfin_serial_port {
 	struct uart_port port;
 	unsigned int old_status;
+	int status_irq;
 	unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	int tx_done;
@@ -125,6 +126,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 struct bfin_serial_res {
 	unsigned long uart_base_addr;
 	int uart_irq;
+	int uart_status_irq;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	unsigned int uart_tx_dma_channel;
 	unsigned int uart_rx_dma_channel;
@@ -140,6 +142,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	 0xFFC00400,
 	 IRQ_UART0_RX,
+	 IRQ_UART0_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	 CH_UART0_TX,
 	 CH_UART0_RX,
@@ -154,6 +157,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	 0xFFC02000,
 	 IRQ_UART1_RX,
+	 IRQ_UART1_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	 CH_UART1_TX,
 	 CH_UART1_RX,
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index d2b160c14f0..a625659dd67 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -53,9 +53,9 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
-#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
-#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
 #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
 
@@ -87,6 +87,7 @@
 struct bfin_serial_port {
 	struct uart_port port;
 	unsigned int old_status;
+	int status_irq;
 	unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	int tx_done;
@@ -125,6 +126,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 struct bfin_serial_res {
 	unsigned long uart_base_addr;
 	int uart_irq;
+	int uart_status_irq;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	unsigned int uart_tx_dma_channel;
 	unsigned int uart_rx_dma_channel;
@@ -140,6 +142,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	 0xFFC00400,
 	 IRQ_UART0_RX,
+	 IRQ_UART0_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	 CH_UART0_TX,
 	 CH_UART0_RX,
@@ -154,6 +157,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	 0xFFC02000,
 	 IRQ_UART1_RX,
+	 IRQ_UART1_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	 CH_UART1_TX,
 	 CH_UART1_RX,
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index 70356ddf850..a3789d7ccf8 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -53,9 +53,9 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
-#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
-#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
 #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
 
@@ -74,6 +74,7 @@
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
+	int			status_irq;
 	unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	int			tx_done;
@@ -116,6 +117,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
+	int		uart_status_irq;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	unsigned int	uart_tx_dma_channel;
 	unsigned int	uart_rx_dma_channel;
@@ -130,6 +132,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	0xFFC00400,
 	IRQ_UART_RX,
+	IRQ_UART_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	CH_UART_TX,
 	CH_UART_RX,
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index d46fc4f50cf..b86662fb9de 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -53,9 +53,9 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
-#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
-#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
 #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
 
@@ -87,6 +87,7 @@
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
+	int			status_irq;
 	unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	int			tx_done;
@@ -124,6 +125,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
+	int		uart_status_irq;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	unsigned int	uart_tx_dma_channel;
 	unsigned int	uart_rx_dma_channel;
@@ -139,6 +141,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	0xFFC00400,
 	IRQ_UART0_RX,
+	IRQ_UART0_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	CH_UART0_TX,
 	CH_UART0_RX,
@@ -153,6 +156,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	0xFFC02000,
 	IRQ_UART1_RX,
+	IRQ_UART1_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	CH_UART1_TX,
 	CH_UART1_RX,
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index 3c2811ebecd..c536551eb4b 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -53,9 +53,9 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
-#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
-#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
 #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
 
@@ -87,6 +87,7 @@
 struct bfin_serial_port {
 	struct uart_port	port;
 	unsigned int		old_status;
+	int			status_irq;
 	unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	int			tx_done;
@@ -125,6 +126,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
+	int		uart_status_irq;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	unsigned int	uart_tx_dma_channel;
 	unsigned int	uart_rx_dma_channel;
@@ -140,6 +142,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	0xFFC00400,
 	IRQ_UART0_RX,
+	IRQ_UART0_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	CH_UART0_TX,
 	CH_UART0_RX,
@@ -154,6 +157,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	0xFFC02000,
 	IRQ_UART1_RX,
+	IRQ_UART1_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	CH_UART1_TX,
 	CH_UART1_RX,
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index 388e2328aeb..2d1b5fa3cca 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -46,41 +46,27 @@
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
 #define UART_SET_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER_SET),v)
-#define UART_CLEAR_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v)
+#define UART_CLEAR_IER(uart,v)  bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v)
 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
 #define UART_PUT_LSR(uart,v)	bfin_write16(((uart)->port.membase + OFFSET_LSR),v)
 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
 #define UART_CLEAR_LSR(uart)    bfin_write16(((uart)->port.membase + OFFSET_LSR), -1)
 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
 #define UART_PUT_MCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_MCR),v)
+#define UART_CLEAR_SCTS(uart)   bfin_write16(((uart)->port.membase + OFFSET_MSR),SCTS)
 
 #define UART_SET_DLAB(uart)     /* MMRs not muxed on BF54x */
 #define UART_CLEAR_DLAB(uart)   /* MMRs not muxed on BF54x */
 
 #define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS)
-#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS))
-#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS))
+#define UART_DISABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) & ~(ARTS|MRTS))
+#define UART_ENABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS | ARTS)
 #define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
 #define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
 
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS)
-# define CONFIG_SERIAL_BFIN_CTSRTS
-
-# ifndef CONFIG_UART0_CTS_PIN
-#  define CONFIG_UART0_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART0_RTS_PIN
-#  define CONFIG_UART0_RTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART2_CTS_PIN
-#  define CONFIG_UART2_CTS_PIN -1
-# endif
-
-# ifndef CONFIG_UART2_RTS_PIN
-#  define CONFIG_UART2_RTS_PIN -1
-# endif
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) || \
+	defined(CONFIG_BFIN_UART2_CTSRTS) || defined(CONFIG_BFIN_UART3_CTSRTS)
+# define CONFIG_SERIAL_BFIN_HARD_CTSRTS
 #endif
 
 #define BFIN_UART_TX_FIFO_SIZE	2
@@ -91,6 +77,7 @@
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
+	int			status_irq;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	int			tx_done;
 	int			tx_count;
@@ -101,23 +88,24 @@ struct bfin_serial_port {
 	unsigned int		rx_dma_channel;
 	struct work_struct	tx_dma_workqueue;
 #endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	struct timer_list 	cts_timer;
-	int		cts_pin;
-	int 		rts_pin;
+#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+	int			scts;
+	int			cts_pin;
+	int			rts_pin;
 #endif
 };
 
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
+	int		uart_status_irq;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	unsigned int	uart_tx_dma_channel;
 	unsigned int	uart_rx_dma_channel;
 #endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	int	uart_cts_pin;
-	int	uart_rts_pin;
+#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+	int		uart_cts_pin;
+	int		uart_rts_pin;
 #endif
 };
 
@@ -126,13 +114,14 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	0xFFC00400,
 	IRQ_UART0_RX,
+	IRQ_UART0_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	CH_UART0_TX,
 	CH_UART0_RX,
 #endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	CONFIG_UART0_CTS_PIN,
-	CONFIG_UART0_RTS_PIN,
+#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+	0,
+	0,
 #endif
 	},
 #endif
@@ -140,13 +129,14 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	0xFFC02000,
 	IRQ_UART1_RX,
+	IRQ_UART1_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	CH_UART1_TX,
 	CH_UART1_RX,
 #endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	0,
-	0,
+#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+	GPIO_PE10,
+	GPIO_PE9,
 #endif
 	},
 #endif
@@ -154,13 +144,14 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	0xFFC02100,
 	IRQ_UART2_RX,
+	IRQ_UART2_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	CH_UART2_TX,
 	CH_UART2_RX,
 #endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	CONFIG_UART2_CTS_PIN,
-	CONFIG_UART2_RTS_PIN,
+#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+	0,
+	0,
 #endif
 	},
 #endif
@@ -168,13 +159,14 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	0xFFC03100,
 	IRQ_UART3_RX,
+	IRQ_UART3_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	CH_UART3_TX,
 	CH_UART3_RX,
 #endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	0,
-	0,
+#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+	GPIO_PB3,
+	GPIO_PB2,
 #endif
 	},
 #endif
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index d0469e3e16d..a1b50878553 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -53,9 +53,9 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
-#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
-#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
 #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
 
@@ -74,6 +74,7 @@
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
+	int			status_irq;
 	unsigned int lsr;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	int			tx_done;
@@ -116,6 +117,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
+	int		uart_status_irq;
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	unsigned int	uart_tx_dma_channel;
 	unsigned int	uart_rx_dma_channel;
@@ -130,6 +132,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	0xFFC00400,
 	IRQ_UART_RX,
+	IRQ_UART_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	CH_UART_TX,
 	CH_UART_RX,