Merge tag 'spi-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into next

Pull spi updates from Mark Brown:
 "For this release SPI has been exceptionally quiet, all the work has
  been on improving drivers (including taking advantage of some of the
  recent framework updates):

   - DMA support for the rspi driver providing a nice performance boost
   - performance improvement for the SIRF controller in PIO mode
   - new support for the Cadence SPI IP and for pxa2xx on BayTrail"

* tag 'spi-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (59 commits)
  spi: rspi: Extract rspi_common_transfer()
  spi: rspi: Add DMA support for RSPI on RZ/A1H
  spi: rspi: Add DMA support for QSPI on R-Car Gen2
  spi: rspi: Absorb rspi_rz_transfer_out_in() into rspi_rz_transfer_one()
  spi: rspi: Merge rspi_*_dma() into rspi_dma_transfer()
  spi: rspi: Pass sg_tables instead of spi_tranfer to rspi_*_dma()
  spi: rspi: Move RSPI-specific setup out of DMA routines
  spi: rspi: Use SPI core DMA mapping framework
  spi: rspi: SPI DMA core needs both RX and TX DMA to function
  spi: rspi: Remove unneeded resource test in DMA setup
  spi: rspi: Extract rspi_request_dma_chan()
  spi: rspi: Don't consider DMA configuration failures fatal
  spi: rspi: Extract rspi_pio_transfer()
  spi: rspi: Use core SPI_MASTER_MUST_[RT]X handling
  spi: rspi: Remove unused 16-bit DMA support
  spi: rspi: Do not call rspi_receive_init() for TX-only
  spi: rspi: Extract rspi_wait_for_{tx_empty,rx_full}()
  spi/pxa2xx: fix runtime PM enabling order
  spi/fsl-espi: fix rx_buf in fsl_espi_cmd_trans()/fsl_espi_rw_trans()
  spi: core: Ignore unsupported spi-[tr]x-bus-width property values
  ...

3 files changed, 18 insertions, 269 deletions

diff --git a/arch/blackfin/include/asm/bfin_spi3.h b/arch/blackfin/include/asm/bfin_spi3.h
deleted file mode 100644
index 0957e65a54b..00000000000
--- a/arch/blackfin/include/asm/bfin_spi3.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Analog Devices SPI3 controller driver
- *
- * Copyright (c) 2011 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _SPI_CHANNEL_H_
-#define _SPI_CHANNEL_H_
-
-#include <linux/types.h>
-
-/* SPI_CONTROL */
-#define SPI_CTL_EN                  0x00000001    /* Enable */
-#define SPI_CTL_MSTR                0x00000002    /* Master/Slave */
-#define SPI_CTL_PSSE                0x00000004    /* controls modf error in master mode */
-#define SPI_CTL_ODM                 0x00000008    /* Open Drain Mode */
-#define SPI_CTL_CPHA                0x00000010    /* Clock Phase */
-#define SPI_CTL_CPOL                0x00000020    /* Clock Polarity */
-#define SPI_CTL_ASSEL               0x00000040    /* Slave Select Pin Control */
-#define SPI_CTL_SELST               0x00000080    /* Slave Select Polarity in-between transfers */
-#define SPI_CTL_EMISO               0x00000100    /* Enable MISO */
-#define SPI_CTL_SIZE                0x00000600    /* Word Transfer Size */
-#define SPI_CTL_SIZE08              0x00000000    /* SIZE: 8 bits */
-#define SPI_CTL_SIZE16              0x00000200    /* SIZE: 16 bits */
-#define SPI_CTL_SIZE32              0x00000400    /* SIZE: 32 bits */
-#define SPI_CTL_LSBF                0x00001000    /* LSB First */
-#define SPI_CTL_FCEN                0x00002000    /* Flow-Control Enable */
-#define SPI_CTL_FCCH                0x00004000    /* Flow-Control Channel Selection */
-#define SPI_CTL_FCPL                0x00008000    /* Flow-Control Polarity */
-#define SPI_CTL_FCWM                0x00030000    /* Flow-Control Water-Mark */
-#define SPI_CTL_FIFO0               0x00000000    /* FCWM: TFIFO empty or RFIFO Full */
-#define SPI_CTL_FIFO1               0x00010000    /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */
-#define SPI_CTL_FIFO2               0x00020000    /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */
-#define SPI_CTL_FMODE               0x00040000    /* Fast-mode Enable */
-#define SPI_CTL_MIOM                0x00300000    /* Multiple I/O Mode */
-#define SPI_CTL_MIO_DIS             0x00000000    /* MIOM: Disable */
-#define SPI_CTL_MIO_DUAL            0x00100000    /* MIOM: Enable DIOM (Dual I/O Mode) */
-#define SPI_CTL_MIO_QUAD            0x00200000    /* MIOM: Enable QUAD (Quad SPI Mode) */
-#define SPI_CTL_SOSI                0x00400000    /* Start on MOSI */
-/* SPI_RX_CONTROL */
-#define SPI_RXCTL_REN               0x00000001    /* Receive Channel Enable */
-#define SPI_RXCTL_RTI               0x00000004    /* Receive Transfer Initiate */
-#define SPI_RXCTL_RWCEN             0x00000008    /* Receive Word Counter Enable */
-#define SPI_RXCTL_RDR               0x00000070    /* Receive Data Request */
-#define SPI_RXCTL_RDR_DIS           0x00000000    /* RDR: Disabled */
-#define SPI_RXCTL_RDR_NE            0x00000010    /* RDR: RFIFO not empty */
-#define SPI_RXCTL_RDR_25            0x00000020    /* RDR: RFIFO 25% full */
-#define SPI_RXCTL_RDR_50            0x00000030    /* RDR: RFIFO 50% full */
-#define SPI_RXCTL_RDR_75            0x00000040    /* RDR: RFIFO 75% full */
-#define SPI_RXCTL_RDR_FULL          0x00000050    /* RDR: RFIFO full */
-#define SPI_RXCTL_RDO               0x00000100    /* Receive Data Over-Run */
-#define SPI_RXCTL_RRWM              0x00003000    /* FIFO Regular Water-Mark */
-#define SPI_RXCTL_RWM_0             0x00000000    /* RRWM: RFIFO Empty */
-#define SPI_RXCTL_RWM_25            0x00001000    /* RRWM: RFIFO 25% full */
-#define SPI_RXCTL_RWM_50            0x00002000    /* RRWM: RFIFO 50% full */
-#define SPI_RXCTL_RWM_75            0x00003000    /* RRWM: RFIFO 75% full */
-#define SPI_RXCTL_RUWM              0x00070000    /* FIFO Urgent Water-Mark */
-#define SPI_RXCTL_UWM_DIS           0x00000000    /* RUWM: Disabled */
-#define SPI_RXCTL_UWM_25            0x00010000    /* RUWM: RFIFO 25% full */
-#define SPI_RXCTL_UWM_50            0x00020000    /* RUWM: RFIFO 50% full */
-#define SPI_RXCTL_UWM_75            0x00030000    /* RUWM: RFIFO 75% full */
-#define SPI_RXCTL_UWM_FULL          0x00040000    /* RUWM: RFIFO full */
-/* SPI_TX_CONTROL */
-#define SPI_TXCTL_TEN               0x00000001    /* Transmit Channel Enable */
-#define SPI_TXCTL_TTI               0x00000004    /* Transmit Transfer Initiate */
-#define SPI_TXCTL_TWCEN             0x00000008    /* Transmit Word Counter Enable */
-#define SPI_TXCTL_TDR               0x00000070    /* Transmit Data Request */
-#define SPI_TXCTL_TDR_DIS           0x00000000    /* TDR: Disabled */
-#define SPI_TXCTL_TDR_NF            0x00000010    /* TDR: TFIFO not full */
-#define SPI_TXCTL_TDR_25            0x00000020    /* TDR: TFIFO 25% empty */
-#define SPI_TXCTL_TDR_50            0x00000030    /* TDR: TFIFO 50% empty */
-#define SPI_TXCTL_TDR_75            0x00000040    /* TDR: TFIFO 75% empty */
-#define SPI_TXCTL_TDR_EMPTY         0x00000050    /* TDR: TFIFO empty */
-#define SPI_TXCTL_TDU               0x00000100    /* Transmit Data Under-Run */
-#define SPI_TXCTL_TRWM              0x00003000    /* FIFO Regular Water-Mark */
-#define SPI_TXCTL_RWM_FULL          0x00000000    /* TRWM: TFIFO full */
-#define SPI_TXCTL_RWM_25            0x00001000    /* TRWM: TFIFO 25% empty */
-#define SPI_TXCTL_RWM_50            0x00002000    /* TRWM: TFIFO 50% empty */
-#define SPI_TXCTL_RWM_75            0x00003000    /* TRWM: TFIFO 75% empty */
-#define SPI_TXCTL_TUWM              0x00070000    /* FIFO Urgent Water-Mark */
-#define SPI_TXCTL_UWM_DIS           0x00000000    /* TUWM: Disabled */
-#define SPI_TXCTL_UWM_25            0x00010000    /* TUWM: TFIFO 25% empty */
-#define SPI_TXCTL_UWM_50            0x00020000    /* TUWM: TFIFO 50% empty */
-#define SPI_TXCTL_UWM_75            0x00030000    /* TUWM: TFIFO 75% empty */
-#define SPI_TXCTL_UWM_EMPTY         0x00040000    /* TUWM: TFIFO empty */
-/* SPI_CLOCK */
-#define SPI_CLK_BAUD                0x0000FFFF    /* Baud Rate */
-/* SPI_DELAY */
-#define SPI_DLY_STOP                0x000000FF    /* Transfer delay time in multiples of SCK period */
-#define SPI_DLY_LEADX               0x00000100    /* Extended (1 SCK) LEAD Control */
-#define SPI_DLY_LAGX                0x00000200    /* Extended (1 SCK) LAG control */
-/* SPI_SSEL */
-#define SPI_SLVSEL_SSE1             0x00000002    /* SPISSEL1 Enable */
-#define SPI_SLVSEL_SSE2             0x00000004    /* SPISSEL2 Enable */
-#define SPI_SLVSEL_SSE3             0x00000008    /* SPISSEL3 Enable */
-#define SPI_SLVSEL_SSE4             0x00000010    /* SPISSEL4 Enable */
-#define SPI_SLVSEL_SSE5             0x00000020    /* SPISSEL5 Enable */
-#define SPI_SLVSEL_SSE6             0x00000040    /* SPISSEL6 Enable */
-#define SPI_SLVSEL_SSE7             0x00000080    /* SPISSEL7 Enable */
-#define SPI_SLVSEL_SSEL1            0x00000200    /* SPISSEL1 Value */
-#define SPI_SLVSEL_SSEL2            0x00000400    /* SPISSEL2 Value */
-#define SPI_SLVSEL_SSEL3            0x00000800    /* SPISSEL3 Value */
-#define SPI_SLVSEL_SSEL4            0x00001000    /* SPISSEL4 Value */
-#define SPI_SLVSEL_SSEL5            0x00002000    /* SPISSEL5 Value */
-#define SPI_SLVSEL_SSEL6            0x00004000    /* SPISSEL6 Value */
-#define SPI_SLVSEL_SSEL7            0x00008000    /* SPISSEL7 Value */
-/* SPI_RWC */
-#define SPI_RWC_VALUE               0x0000FFFF    /* Received Word-Count */
-/* SPI_RWCR */
-#define SPI_RWCR_VALUE              0x0000FFFF    /* Received Word-Count Reload */
-/* SPI_TWC */
-#define SPI_TWC_VALUE               0x0000FFFF    /* Transmitted Word-Count */
-/* SPI_TWCR */
-#define SPI_TWCR_VALUE              0x0000FFFF    /* Transmitted Word-Count Reload */
-/* SPI_IMASK */
-#define SPI_IMSK_RUWM               0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_TUWM               0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_ROM                0x00000010    /* Receive Over-Run Error Interrupt Mask */
-#define SPI_IMSK_TUM                0x00000020    /* Transmit Under-Run Error Interrupt Mask */
-#define SPI_IMSK_TCM                0x00000040    /* Transmit Collision Error Interrupt Mask */
-#define SPI_IMSK_MFM                0x00000080    /* Mode Fault Error Interrupt Mask */
-#define SPI_IMSK_RSM                0x00000100    /* Receive Start Interrupt Mask */
-#define SPI_IMSK_TSM                0x00000200    /* Transmit Start Interrupt Mask */
-#define SPI_IMSK_RFM                0x00000400    /* Receive Finish Interrupt Mask */
-#define SPI_IMSK_TFM                0x00000800    /* Transmit Finish Interrupt Mask */
-/* SPI_IMASKCL */
-#define SPI_IMSK_CLR_RUW            0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_CLR_TUWM           0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_CLR_ROM            0x00000010    /* Receive Over-Run Error Interrupt Mask */
-#define SPI_IMSK_CLR_TUM            0x00000020    /* Transmit Under-Run Error Interrupt Mask */
-#define SPI_IMSK_CLR_TCM            0x00000040    /* Transmit Collision Error Interrupt Mask */
-#define SPI_IMSK_CLR_MFM            0x00000080    /* Mode Fault Error Interrupt Mask */
-#define SPI_IMSK_CLR_RSM            0x00000100    /* Receive Start Interrupt Mask */
-#define SPI_IMSK_CLR_TSM            0x00000200    /* Transmit Start Interrupt Mask */
-#define SPI_IMSK_CLR_RFM            0x00000400    /* Receive Finish Interrupt Mask */
-#define SPI_IMSK_CLR_TFM            0x00000800    /* Transmit Finish Interrupt Mask */
-/* SPI_IMASKST */
-#define SPI_IMSK_SET_RUWM           0x00000002    /* Receive Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_SET_TUWM           0x00000004    /* Transmit Urgent Water-Mark Interrupt Mask */
-#define SPI_IMSK_SET_ROM            0x00000010    /* Receive Over-Run Error Interrupt Mask */
-#define SPI_IMSK_SET_TUM            0x00000020    /* Transmit Under-Run Error Interrupt Mask */
-#define SPI_IMSK_SET_TCM            0x00000040    /* Transmit Collision Error Interrupt Mask */
-#define SPI_IMSK_SET_MFM            0x00000080    /* Mode Fault Error Interrupt Mask */
-#define SPI_IMSK_SET_RSM            0x00000100    /* Receive Start Interrupt Mask */
-#define SPI_IMSK_SET_TSM            0x00000200    /* Transmit Start Interrupt Mask */
-#define SPI_IMSK_SET_RFM            0x00000400    /* Receive Finish Interrupt Mask */
-#define SPI_IMSK_SET_TFM            0x00000800    /* Transmit Finish Interrupt Mask */
-/* SPI_STATUS */
-#define SPI_STAT_SPIF               0x00000001    /* SPI Finished */
-#define SPI_STAT_RUWM               0x00000002    /* Receive Urgent Water-Mark Breached */
-#define SPI_STAT_TUWM               0x00000004    /* Transmit Urgent Water-Mark Breached */
-#define SPI_STAT_ROE                0x00000010    /* Receive Over-Run Error Indication */
-#define SPI_STAT_TUE                0x00000020    /* Transmit Under-Run Error Indication */
-#define SPI_STAT_TCE                0x00000040    /* Transmit Collision Error Indication */
-#define SPI_STAT_MODF               0x00000080    /* Mode Fault Error Indication */
-#define SPI_STAT_RS                 0x00000100    /* Receive Start Indication */
-#define SPI_STAT_TS                 0x00000200    /* Transmit Start Indication */
-#define SPI_STAT_RF                 0x00000400    /* Receive Finish Indication */
-#define SPI_STAT_TF                 0x00000800    /* Transmit Finish Indication */
-#define SPI_STAT_RFS                0x00007000    /* SPI_RFIFO status */
-#define SPI_STAT_RFIFO_EMPTY        0x00000000    /* RFS: RFIFO Empty */
-#define SPI_STAT_RFIFO_25           0x00001000    /* RFS: RFIFO 25% Full */
-#define SPI_STAT_RFIFO_50           0x00002000    /* RFS: RFIFO 50% Full */
-#define SPI_STAT_RFIFO_75           0x00003000    /* RFS: RFIFO 75% Full */
-#define SPI_STAT_RFIFO_FULL         0x00004000    /* RFS: RFIFO Full */
-#define SPI_STAT_TFS                0x00070000    /* SPI_TFIFO status */
-#define SPI_STAT_TFIFO_FULL         0x00000000    /* TFS: TFIFO full */
-#define SPI_STAT_TFIFO_25           0x00010000    /* TFS: TFIFO 25% empty */
-#define SPI_STAT_TFIFO_50           0x00020000    /* TFS: TFIFO 50% empty */
-#define SPI_STAT_TFIFO_75           0x00030000    /* TFS: TFIFO 75% empty */
-#define SPI_STAT_TFIFO_EMPTY        0x00040000    /* TFS: TFIFO empty */
-#define SPI_STAT_FCS                0x00100000    /* Flow-Control Stall Indication */
-#define SPI_STAT_RFE                0x00400000    /* SPI_RFIFO Empty */
-#define SPI_STAT_TFF                0x00800000    /* SPI_TFIFO Full */
-/* SPI_ILAT */
-#define SPI_ILAT_RUWMI              0x00000002    /* Receive Urgent Water Mark Interrupt */
-#define SPI_ILAT_TUWMI              0x00000004    /* Transmit Urgent Water Mark Interrupt */
-#define SPI_ILAT_ROI                0x00000010    /* Receive Over-Run Error Indication */
-#define SPI_ILAT_TUI                0x00000020    /* Transmit Under-Run Error Indication */
-#define SPI_ILAT_TCI                0x00000040    /* Transmit Collision Error Indication */
-#define SPI_ILAT_MFI                0x00000080    /* Mode Fault Error Indication */
-#define SPI_ILAT_RSI                0x00000100    /* Receive Start Indication */
-#define SPI_ILAT_TSI                0x00000200    /* Transmit Start Indication */
-#define SPI_ILAT_RFI                0x00000400    /* Receive Finish Indication */
-#define SPI_ILAT_TFI                0x00000800    /* Transmit Finish Indication */
-/* SPI_ILATCL */
-#define SPI_ILAT_CLR_RUWMI          0x00000002    /* Receive Urgent Water Mark Interrupt */
-#define SPI_ILAT_CLR_TUWMI          0x00000004    /* Transmit Urgent Water Mark Interrupt */
-#define SPI_ILAT_CLR_ROI            0x00000010    /* Receive Over-Run Error Indication */
-#define SPI_ILAT_CLR_TUI            0x00000020    /* Transmit Under-Run Error Indication */
-#define SPI_ILAT_CLR_TCI            0x00000040    /* Transmit Collision Error Indication */
-#define SPI_ILAT_CLR_MFI            0x00000080    /* Mode Fault Error Indication */
-#define SPI_ILAT_CLR_RSI            0x00000100    /* Receive Start Indication */
-#define SPI_ILAT_CLR_TSI            0x00000200    /* Transmit Start Indication */
-#define SPI_ILAT_CLR_RFI            0x00000400    /* Receive Finish Indication */
-#define SPI_ILAT_CLR_TFI            0x00000800    /* Transmit Finish Indication */
-
-/*
- * bfin spi3 registers layout
- */
-struct bfin_spi_regs {
-	u32 revid;
-	u32 control;
-	u32 rx_control;
-	u32 tx_control;
-	u32 clock;
-	u32 delay;
-	u32 ssel;
-	u32 rwc;
-	u32 rwcr;
-	u32 twc;
-	u32 twcr;
-	u32 reserved0;
-	u32 emask;
-	u32 emaskcl;
-	u32 emaskst;
-	u32 reserved1;
-	u32 status;
-	u32 elat;
-	u32 elatcl;
-	u32 reserved2;
-	u32 rfifo;
-	u32 reserved3;
-	u32 tfifo;
-};
-
-#define MAX_CTRL_CS          8  /* cs in spi controller */
-
-/* device.platform_data for SSP controller devices */
-struct bfin_spi3_master {
-	u16 num_chipselect;
-	u16 pin_req[7];
-};
-
-/* spi_board_info.controller_data for SPI slave devices,
- * copied to spi_device.platform_data ... mostly for dma tuning
- */
-struct bfin_spi3_chip {
-	u32 control;
-	u16 cs_chg_udelay; /* Some devices require 16-bit delays */
-	u32 tx_dummy_val; /* tx value for rx only transfer */
-	bool enable_dma;
-};
-
-#endif /* _SPI_CHANNEL_H_ */
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
index 943f7e95ec1..1ba4600de69 100644
--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -20,7 +20,7 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/platform_data/pinctrl-adi2.h>
-#include <asm/bfin_spi3.h>
+#include <linux/spi/adi_spi3.h>
 #include <asm/dma.h>
 #include <asm/gpio.h>
 #include <asm/nand.h>
@@ -767,13 +767,13 @@ static struct flash_platform_data bfin_spi_flash_data = {
 	.type = "w25q32",
 };
 
-static struct bfin_spi3_chip spi_flash_chip_info = {
+static struct adi_spi3_chip spi_flash_chip_info = {
 	.enable_dma = true,         /* use dma transfer with this chip*/
 };
 #endif
 
 #if IS_ENABLED(CONFIG_SPI_SPIDEV)
-static struct bfin_spi3_chip spidev_chip_info = {
+static struct adi_spi3_chip spidev_chip_info = {
 	.enable_dma = true,
 };
 #endif
@@ -1736,7 +1736,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 };
-#if IS_ENABLED(CONFIG_SPI_BFIN_V3)
+#if IS_ENABLED(CONFIG_SPI_ADI_V3)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	{
@@ -1777,13 +1777,13 @@ static struct resource bfin_spi1_resource[] = {
 };
 
 /* SPI controller data */
-static struct bfin_spi3_master bf60x_spi_master_info0 = {
+static struct adi_spi3_master bf60x_spi_master_info0 = {
 	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
 	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bf60x_spi_master0 = {
-	.name = "bfin-spi3",
+	.name = "adi-spi3",
 	.id = 0, /* Bus number */
 	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
 	.resource = bfin_spi0_resource,
@@ -1792,13 +1792,13 @@ static struct platform_device bf60x_spi_master0 = {
 	},
 };
 
-static struct bfin_spi3_master bf60x_spi_master_info1 = {
+static struct adi_spi3_master bf60x_spi_master_info1 = {
 	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
 	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 };
 
 static struct platform_device bf60x_spi_master1 = {
-	.name = "bfin-spi3",
+	.name = "adi-spi3",
 	.id = 1, /* Bus number */
 	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
 	.resource = bfin_spi1_resource,
@@ -1990,7 +1990,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_sdh_device,
 #endif
 
-#if IS_ENABLED(CONFIG_SPI_BFIN_V3)
+#if IS_ENABLED(CONFIG_SPI_ADI_V3)
 	&bf60x_spi_master0,
 	&bf60x_spi_master1,
 #endif
@@ -2051,8 +2051,8 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1",  "pinctrl-adi2.0", NULL, "uart1"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0",  "pinctrl-adi2.0", NULL, "rsi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0",  "pinctrl-adi2.0", NULL, "eth0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.0",  "pinctrl-adi2.0", NULL, "spi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.1",  "pinctrl-adi2.0", NULL, "spi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0",  "pinctrl-adi2.0", NULL, "spi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1",  "pinctrl-adi2.0", NULL, "spi1"),
 	PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0",  "pinctrl-adi2.0", NULL, "twi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1",  "pinctrl-adi2.0", NULL, "twi1"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary",  "pinctrl-adi2.0", NULL, "rotary"),
diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c
index 56200f37cfc..244fa4ab4c5 100644
--- a/arch/blackfin/mach-bf609/clock.c
+++ b/arch/blackfin/mach-bf609/clock.c
@@ -363,6 +363,12 @@ static struct clk ethclk = {
 	.ops	    = &dummy_clk_ops,
 };
 
+static struct clk spiclk = {
+	.name       = "spi",
+	.parent     = &sclk1,
+	.ops        = &dummy_clk_ops,
+};
+
 static struct clk_lookup bf609_clks[] = {
 	CLK(sys_clkin, NULL, "SYS_CLKIN"),
 	CLK(pll_clk, NULL, "PLLCLK"),
@@ -375,6 +381,7 @@ static struct clk_lookup bf609_clks[] = {
 	CLK(dclk, NULL, "DCLK"),
 	CLK(oclk, NULL, "OCLK"),
 	CLK(ethclk, NULL, "stmmaceth"),
+	CLK(spiclk, NULL, "spi"),
 };
 
 int __init clk_init(void)