summaryrefslogtreecommitdiffstats
path: root/arch/cris/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/cris/Kconfig
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/cris/Kconfig')
-rw-r--r--arch/cris/Kconfig180
1 files changed, 180 insertions, 0 deletions
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
new file mode 100644
index 00000000000..4332ca348d5
--- /dev/null
+++ b/arch/cris/Kconfig
@@ -0,0 +1,180 @@
+#
+# For a description of the syntax of this configuration file,
+# see the Configure script.
+#
+
+mainmenu "Linux/CRIS Kernel Configuration"
+
+config MMU
+ bool
+ default y
+
+config UID16
+ bool
+ default y
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config CRIS
+ bool
+ default y
+
+source "init/Kconfig"
+
+menu "General setup"
+
+source "fs/Kconfig.binfmt"
+
+config ETRAX_CMDLINE
+ string "Kernel command line"
+ default "root=/dev/mtdblock3"
+ help
+ Pass additional commands to the kernel.
+
+config ETRAX_WATCHDOG
+ bool "Enable ETRAX watchdog"
+ help
+ Enable the built-in watchdog timer support on ETRAX based embedded
+ network computers.
+
+config ETRAX_WATCHDOG_NICE_DOGGY
+ bool "Disable watchdog during Oops printouts"
+ depends on ETRAX_WATCHDOG
+ help
+ By enabling this you make sure that the watchdog does not bite while
+ printing oopses. Recommended for development systems but not for
+ production releases.
+
+config ETRAX_FAST_TIMER
+ bool "Enable ETRAX fast timer API"
+ help
+ This options enables the API to a fast timer implementation using
+ timer1 to get sub jiffie resolution timers (primarily one-shot
+ timers).
+ This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
+
+config PREEMPT
+ bool "Preemptible Kernel"
+ help
+ This option reduces the latency of the kernel when reacting to
+ real-time or interactive events by allowing a low priority process to
+ be preempted even if it is in kernel mode executing a system call.
+ This allows applications to run more reliably even when the system is
+ under load.
+
+ Say Y here if you are building a kernel for a desktop, embedded
+ or real-time system. Say N if you are unsure.
+
+endmenu
+
+menu "Hardware setup"
+
+choice
+ prompt "Processor type"
+ default ETRAX100LX
+
+config ETRAX100LX
+ bool "ETRAX-100LX-v1"
+ help
+ Support version 1 of the ETRAX 100LX.
+
+config ETRAX100LX_V2
+ bool "ETRAX-100LX-v2"
+ help
+ Support version 2 of the ETRAX 100LX.
+
+config SVINTO_SIM
+ bool "ETRAX-100LX-for-xsim-simulator"
+ help
+ Support the xsim ETRAX Simulator.
+
+endchoice
+
+config ETRAX_ARCH_V10
+ bool
+ default y if ETRAX100LX || ETRAX100LX_V2
+ default n if !(ETRAX100LX || ETRAX100LX_V2)
+
+config ETRAX_DRAM_SIZE
+ int "DRAM size (dec, in MB)"
+ default "8"
+ help
+ Size of DRAM (decimal in MB) typically 2, 8 or 16.
+
+config ETRAX_FLASH_BUSWIDTH
+ int "Buswidth of flash in bytes"
+ default "2"
+ help
+ Width in bytes of the Flash bus (1, 2 or 4). Is usually 2.
+
+source arch/cris/arch-v10/Kconfig
+
+endmenu
+
+# bring in ETRAX built-in drivers
+menu "Drivers for built-in interfaces"
+source arch/cris/arch-v10/drivers/Kconfig
+
+endmenu
+
+source "drivers/base/Kconfig"
+
+# standard linux drivers
+source "drivers/mtd/Kconfig"
+
+source "drivers/parport/Kconfig"
+
+source "drivers/pnp/Kconfig"
+
+source "drivers/block/Kconfig"
+
+source "drivers/md/Kconfig"
+
+source "drivers/ide/Kconfig"
+
+source "drivers/scsi/Kconfig"
+
+source "drivers/ieee1394/Kconfig"
+
+source "drivers/message/i2o/Kconfig"
+
+source "net/Kconfig"
+
+source "drivers/isdn/Kconfig"
+
+source "drivers/telephony/Kconfig"
+
+source "drivers/cdrom/Kconfig"
+
+#
+# input before char - char/joystick depends on it. As does USB.
+#
+source "drivers/input/Kconfig"
+
+source "drivers/char/Kconfig"
+
+#source drivers/misc/Config.in
+source "drivers/media/Kconfig"
+
+source "fs/Kconfig"
+
+source "sound/Kconfig"
+
+source "drivers/usb/Kconfig"
+
+source "arch/cris/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"