Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 730 insertions, 0 deletions

diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c
new file mode 100644
index 00000000000..8bbe233ba7b
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/i2c.c
@@ -0,0 +1,730 @@
+/*!***************************************************************************
+*!
+*! FILE NAME  : i2c.c
+*!
+*! DESCRIPTION: implements an interface for IIC/I2C, both directly from other
+*!              kernel modules (i2c_writereg/readreg) and from userspace using
+*!              ioctl()'s
+*!
+*! Nov 30 1998  Torbjorn Eliasson  Initial version.
+*!              Bjorn Wesen        Elinux kernel version.
+*! Jan 14 2000  Johan Adolfsson    Fixed PB shadow register stuff - 
+*!                                 don't use PB_I2C if DS1302 uses same bits,
+*!                                 use PB.
+*! $Log: i2c.c,v $
+*! Revision 1.9  2004/08/24 06:49:14  starvik
+*! Whitespace cleanup
+*!
+*! Revision 1.8  2004/06/08 08:48:26  starvik
+*! Removed unused code
+*!
+*! Revision 1.7  2004/05/28 09:26:59  starvik
+*! Modified I2C initialization to work in 2.6.
+*!
+*! Revision 1.6  2004/05/14 07:58:03  starvik
+*! Merge of changes from 2.4
+*!
+*! Revision 1.4  2002/12/11 13:13:57  starvik
+*! Added arch/ to v10 specific includes
+*! Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
+*!
+*! Revision 1.3  2002/11/20 11:56:11  starvik
+*! Merge of Linux 2.5.48
+*!
+*! Revision 1.2  2002/11/18 13:16:06  starvik
+*! Linux 2.5 port of latest 2.4 drivers
+*!
+*! Revision 1.9  2002/10/31 15:32:26  starvik
+*! Update Port B register and shadow even when running with hardware support
+*!   to avoid glitches when reading bits
+*! Never set direction to out in i2c_inbyte
+*! Removed incorrect clock togling at end of i2c_inbyte
+*!
+*! Revision 1.8  2002/08/13 06:31:53  starvik
+*! Made SDA and SCL line configurable
+*! Modified i2c_inbyte to work with PCF8563
+*!
+*! Revision 1.7  2001/04/04 13:11:36  markusl
+*! Updated according to review remarks
+*!
+*! Revision 1.6  2001/03/19 12:43:00  markusl
+*! Made some symbols unstatic (used by the eeprom driver)
+*!
+*! Revision 1.5  2001/02/27 13:52:48  bjornw
+*! malloc.h -> slab.h
+*!
+*! Revision 1.4  2001/02/15 07:17:40  starvik
+*! Corrected usage if port_pb_i2c_shadow
+*!
+*! Revision 1.3  2001/01/26 17:55:13  bjornw
+*! * Made I2C_USES_PB_NOT_PB_I2C a CONFIG option instead of assigning it
+*!   magically. Config.in needs to set it for the options that need it, like
+*!   Dallas 1302 support. Actually, it should be default since it screws up
+*!   the PB bits even if you don't use I2C..
+*! * Include linux/config.h to get the above
+*!
+*! Revision 1.2  2001/01/18 15:49:30  bjornw
+*! 2.4 port of I2C including some cleanups (untested of course)
+*!
+*! Revision 1.1  2001/01/18 15:35:25  bjornw
+*! Verbatim copy of the Etrax i2c driver, 2.0 elinux version
+*!
+*!
+*! ---------------------------------------------------------------------------
+*!
+*! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN
+*!
+*!***************************************************************************/
+/* $Id: i2c.c,v 1.9 2004/08/24 06:49:14 starvik Exp $ */
+
+/****************** INCLUDE FILES SECTION ***********************************/
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/config.h>
+
+#include <asm/etraxi2c.h>
+
+#include <asm/system.h>
+#include <asm/arch/svinto.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#include "i2c.h"
+
+/****************** I2C DEFINITION SECTION *************************/
+
+#define D(x)
+
+#define I2C_MAJOR 123  /* LOCAL/EXPERIMENTAL */
+static const char i2c_name[] = "i2c";
+
+#define CLOCK_LOW_TIME            8
+#define CLOCK_HIGH_TIME           8
+#define START_CONDITION_HOLD_TIME 8
+#define STOP_CONDITION_HOLD_TIME  8
+#define ENABLE_OUTPUT 0x01
+#define ENABLE_INPUT 0x00
+#define I2C_CLOCK_HIGH 1
+#define I2C_CLOCK_LOW 0
+#define I2C_DATA_HIGH 1
+#define I2C_DATA_LOW 0
+
+#ifdef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
+/* Use PB and not PB_I2C */
+#ifndef CONFIG_ETRAX_I2C_DATA_PORT
+#define CONFIG_ETRAX_I2C_DATA_PORT 0
+#endif
+#ifndef CONFIG_ETRAX_I2C_CLK_PORT
+#define CONFIG_ETRAX_I2C_CLK_PORT 1
+#endif
+
+#define SDABIT CONFIG_ETRAX_I2C_DATA_PORT
+#define SCLBIT CONFIG_ETRAX_I2C_CLK_PORT
+#define i2c_enable() 
+#define i2c_disable() 
+
+/* enable or disable output-enable, to select output or input on the i2c bus */
+
+#define i2c_dir_out() \
+  REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, SDABIT, 1)
+#define i2c_dir_in()  \
+  REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, SDABIT, 0)
+
+/* control the i2c clock and data signals */
+
+#define i2c_clk(x) \
+  REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, SCLBIT, x)
+#define i2c_data(x) \
+  REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, SDABIT, x)
+
+/* read a bit from the i2c interface */
+
+#define i2c_getbit() (((*R_PORT_PB_READ & (1 << SDABIT))) >> SDABIT)
+
+#else
+/* enable or disable the i2c interface */
+
+#define i2c_enable() *R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_en))
+#define i2c_disable() *R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_en))
+
+/* enable or disable output-enable, to select output or input on the i2c bus */
+
+#define i2c_dir_out() \
+	*R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
+	REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1); 
+#define i2c_dir_in() \
+	*R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
+	REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 0);
+
+/* control the i2c clock and data signals */
+
+#define i2c_clk(x) \
+	*R_PORT_PB_I2C = (port_pb_i2c_shadow = (port_pb_i2c_shadow & \
+       ~IO_MASK(R_PORT_PB_I2C, i2c_clk)) | IO_FIELD(R_PORT_PB_I2C, i2c_clk, (x))); \
+       REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, 1, x);
+
+#define i2c_data(x) \
+	*R_PORT_PB_I2C = (port_pb_i2c_shadow = (port_pb_i2c_shadow & \
+	   ~IO_MASK(R_PORT_PB_I2C, i2c_d)) | IO_FIELD(R_PORT_PB_I2C, i2c_d, (x))); \
+	REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, 0, x);
+
+/* read a bit from the i2c interface */
+
+#define i2c_getbit() (*R_PORT_PB_READ & 0x1)
+#endif
+
+/* use the kernels delay routine */
+
+#define i2c_delay(usecs) udelay(usecs)
+
+
+/****************** FUNCTION DEFINITION SECTION *************************/
+
+
+/* generate i2c start condition */
+
+void
+i2c_start(void)
+{
+	/*
+	 * SCL=1 SDA=1
+	 */
+	i2c_dir_out();
+	i2c_delay(CLOCK_HIGH_TIME/6);
+	i2c_data(I2C_DATA_HIGH);
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+	/*
+	 * SCL=1 SDA=0
+	 */
+	i2c_data(I2C_DATA_LOW);
+	i2c_delay(START_CONDITION_HOLD_TIME);
+	/*
+	 * SCL=0 SDA=0
+	 */
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_LOW_TIME);
+}
+
+/* generate i2c stop condition */
+
+void
+i2c_stop(void)
+{
+	i2c_dir_out();
+
+	/*
+	 * SCL=0 SDA=0
+	 */
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_data(I2C_DATA_LOW);
+	i2c_delay(CLOCK_LOW_TIME*2);
+	/*
+	 * SCL=1 SDA=0
+	 */
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME*2);
+	/*
+	 * SCL=1 SDA=1
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	i2c_delay(STOP_CONDITION_HOLD_TIME);
+
+	i2c_dir_in();
+}
+
+/* write a byte to the i2c interface */
+
+void
+i2c_outbyte(unsigned char x)
+{
+	int i;
+
+	i2c_dir_out();
+
+	for (i = 0; i < 8; i++) {
+		if (x & 0x80) {
+			i2c_data(I2C_DATA_HIGH);
+		} else {
+			i2c_data(I2C_DATA_LOW);
+		}
+		
+		i2c_delay(CLOCK_LOW_TIME/2);
+		i2c_clk(I2C_CLOCK_HIGH);
+		i2c_delay(CLOCK_HIGH_TIME);
+		i2c_clk(I2C_CLOCK_LOW);
+		i2c_delay(CLOCK_LOW_TIME/2);
+		x <<= 1;
+	}
+	i2c_data(I2C_DATA_LOW);
+	i2c_delay(CLOCK_LOW_TIME/2);
+
+	/*
+	 * enable input
+	 */
+	i2c_dir_in();
+}
+
+/* read a byte from the i2c interface */
+
+unsigned char
+i2c_inbyte(void)
+{
+	unsigned char aBitByte = 0;
+	int i;
+
+	/* Switch off I2C to get bit */
+	i2c_disable();
+	i2c_dir_in();
+	i2c_delay(CLOCK_HIGH_TIME/2);
+
+	/* Get bit */
+	aBitByte |= i2c_getbit();
+
+	/* Enable I2C */
+	i2c_enable();
+	i2c_delay(CLOCK_LOW_TIME/2);
+
+	for (i = 1; i < 8; i++) {
+		aBitByte <<= 1;
+		/* Clock pulse */
+		i2c_clk(I2C_CLOCK_HIGH);
+		i2c_delay(CLOCK_HIGH_TIME);
+		i2c_clk(I2C_CLOCK_LOW);
+		i2c_delay(CLOCK_LOW_TIME);
+
+		/* Switch off I2C to get bit */
+		i2c_disable();
+		i2c_dir_in();
+		i2c_delay(CLOCK_HIGH_TIME/2);
+
+		/* Get bit */
+		aBitByte |= i2c_getbit();
+
+		/* Enable I2C */
+		i2c_enable();
+		i2c_delay(CLOCK_LOW_TIME/2);
+	}
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+
+        /*
+	 * we leave the clock low, getbyte is usually followed
+	 * by sendack/nack, they assume the clock to be low
+	 */
+        i2c_clk(I2C_CLOCK_LOW);
+	return aBitByte;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_getack
+*#
+*# DESCRIPTION  : checks if ack was received from ic2
+*#
+*#--------------------------------------------------------------------------*/
+
+int
+i2c_getack(void)
+{
+	int ack = 1;
+	/*
+	 * enable output
+	 */
+	i2c_dir_out();
+	/*
+	 * Release data bus by setting
+	 * data high
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	/*
+	 * enable input
+	 */
+	i2c_dir_in();
+	i2c_delay(CLOCK_HIGH_TIME/4);
+	/*
+	 * generate ACK clock pulse
+	 */
+	i2c_clk(I2C_CLOCK_HIGH);
+	/*
+	 * Use PORT PB instead of I2C
+	 * for input. (I2C not working)
+	 */
+	i2c_clk(1);
+	i2c_data(1);
+	/*
+	 * switch off I2C
+	 */
+	i2c_data(1);
+	i2c_disable();
+	i2c_dir_in();
+	/*
+	 * now wait for ack
+	 */
+	i2c_delay(CLOCK_HIGH_TIME/2);
+	/*
+	 * check for ack
+	 */
+	if(i2c_getbit())
+		ack = 0;
+	i2c_delay(CLOCK_HIGH_TIME/2);
+	if(!ack){
+		if(!i2c_getbit()) /* receiver pulld SDA low */
+			ack = 1;
+		i2c_delay(CLOCK_HIGH_TIME/2);
+	}
+
+	/*
+	 * our clock is high now, make sure data is low
+	 * before we enable our output. If we keep data high
+	 * and enable output, we would generate a stop condition.
+	 */
+	i2c_data(I2C_DATA_LOW);
+
+	/*
+	 * end clock pulse
+	 */
+	i2c_enable();
+	i2c_dir_out();
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_HIGH_TIME/4);
+	/*
+	 * enable output
+	 */
+	i2c_dir_out();
+	/*
+	 * remove ACK clock pulse
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	i2c_delay(CLOCK_LOW_TIME/2);
+	return ack;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: I2C::sendAck
+*#
+*# DESCRIPTION  : Send ACK on received data
+*#
+*#--------------------------------------------------------------------------*/
+void
+i2c_sendack(void)
+{
+	/*
+	 * enable output
+	 */
+	i2c_delay(CLOCK_LOW_TIME);
+	i2c_dir_out();
+	/*
+	 * set ack pulse high
+	 */
+	i2c_data(I2C_DATA_LOW);
+	/*
+	 * generate clock pulse
+	 */
+	i2c_delay(CLOCK_HIGH_TIME/6);
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_LOW_TIME/6);
+	/*
+	 * reset data out
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	i2c_delay(CLOCK_LOW_TIME);
+
+	i2c_dir_in();
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_sendnack
+*#
+*# DESCRIPTION  : Sends NACK on received data
+*#
+*#--------------------------------------------------------------------------*/
+void
+i2c_sendnack(void)
+{
+	/*
+	 * enable output
+	 */
+	i2c_delay(CLOCK_LOW_TIME);
+	i2c_dir_out();
+	/*
+	 * set data high
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	/*
+	 * generate clock pulse
+	 */
+	i2c_delay(CLOCK_HIGH_TIME/6);
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_LOW_TIME);
+
+	i2c_dir_in();
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_writereg
+*#
+*# DESCRIPTION  : Writes a value to an I2C device
+*#
+*#--------------------------------------------------------------------------*/
+int
+i2c_writereg(unsigned char theSlave, unsigned char theReg, 
+	     unsigned char theValue)
+{
+	int error, cntr = 3;
+	unsigned long flags;
+
+	do {
+		error = 0;
+		/*
+		 * we don't like to be interrupted
+		 */
+		local_irq_save(flags);
+		local_irq_disable();
+
+		i2c_start();
+		/*
+		 * send slave address
+		 */
+		i2c_outbyte((theSlave & 0xfe));
+		/*
+		 * wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * now select register
+		 */
+		i2c_dir_out();
+		i2c_outbyte(theReg);
+		/*
+		 * now it's time to wait for ack
+		 */
+		if(!i2c_getack())
+			error |= 2;
+		/*
+		 * send register register data
+		 */
+		i2c_outbyte(theValue);
+		/*
+		 * now it's time to wait for ack
+		 */
+		if(!i2c_getack())
+			error |= 4;
+		/*
+		 * end byte stream
+		 */
+		i2c_stop();
+		/*
+		 * enable interrupt again
+		 */
+		local_irq_restore(flags);
+		
+	} while(error && cntr--);
+
+	i2c_delay(CLOCK_LOW_TIME);
+
+	return -error;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_readreg
+*#
+*# DESCRIPTION  : Reads a value from the decoder registers.
+*#
+*#--------------------------------------------------------------------------*/
+unsigned char
+i2c_readreg(unsigned char theSlave, unsigned char theReg)
+{
+	unsigned char b = 0;
+	int error, cntr = 3;
+	unsigned long flags;
+
+	do {
+		error = 0;
+		/*
+		 * we don't like to be interrupted
+		 */
+		local_irq_save(flags);
+		local_irq_disable();
+		/*
+		 * generate start condition
+		 */
+		i2c_start();
+    
+		/*
+		 * send slave address
+		 */
+		i2c_outbyte((theSlave & 0xfe));
+		/*
+		 * wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * now select register
+		 */
+		i2c_dir_out();
+		i2c_outbyte(theReg);
+		/*
+		 * now it's time to wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * repeat start condition
+		 */
+		i2c_delay(CLOCK_LOW_TIME);
+		i2c_start();
+		/*
+		 * send slave address
+		 */
+		i2c_outbyte(theSlave | 0x01);
+		/*
+		 * wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * fetch register
+		 */
+		b = i2c_inbyte();
+		/*
+		 * last received byte needs to be nacked
+		 * instead of acked
+		 */
+		i2c_sendack();
+		/*
+		 * end sequence
+		 */
+		i2c_stop();
+		/*
+		 * enable interrupt again
+		 */
+		local_irq_restore(flags);
+		
+	} while(error && cntr--);
+
+	return b;
+}
+
+static int
+i2c_open(struct inode *inode, struct file *filp)
+{
+	return 0;
+}
+
+static int
+i2c_release(struct inode *inode, struct file *filp)
+{
+	return 0;
+}
+
+/* Main device API. ioctl's to write or read to/from i2c registers.
+ */
+
+static int
+i2c_ioctl(struct inode *inode, struct file *file,
+	  unsigned int cmd, unsigned long arg)
+{
+	if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
+		return -EINVAL;
+	}
+
+	switch (_IOC_NR(cmd)) {
+		case I2C_WRITEREG:
+			/* write to an i2c slave */
+			D(printk("i2cw %d %d %d\n", 
+				 I2C_ARGSLAVE(arg),
+				 I2C_ARGREG(arg),
+				 I2C_ARGVALUE(arg)));
+
+			return i2c_writereg(I2C_ARGSLAVE(arg),
+					    I2C_ARGREG(arg),
+					    I2C_ARGVALUE(arg));
+		case I2C_READREG:
+		{
+			unsigned char val;
+			/* read from an i2c slave */
+			D(printk("i2cr %d %d ", 
+				I2C_ARGSLAVE(arg),
+				I2C_ARGREG(arg)));
+			val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
+			D(printk("= %d\n", val));
+			return val;
+		}					    
+		default:
+			return -EINVAL;
+
+	}
+	
+	return 0;
+}
+
+static struct file_operations i2c_fops = {
+	.owner    = THIS_MODULE,
+	.ioctl    = i2c_ioctl,
+	.open     = i2c_open,
+	.release  = i2c_release,
+};
+
+int __init
+i2c_init(void)
+{
+	/* Setup and enable the Port B I2C interface */
+
+#ifndef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
+	*R_PORT_PB_I2C = port_pb_i2c_shadow |= 
+		IO_STATE(R_PORT_PB_I2C, i2c_en,  on) |
+		IO_FIELD(R_PORT_PB_I2C, i2c_d,   1)  |
+		IO_FIELD(R_PORT_PB_I2C, i2c_clk, 1)  |
+		IO_STATE(R_PORT_PB_I2C, i2c_oe_, enable);
+#endif
+
+	port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir0);
+	port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir1);
+
+	*R_PORT_PB_DIR = (port_pb_dir_shadow |=
+			  IO_STATE(R_PORT_PB_DIR, dir0, input)  |
+			  IO_STATE(R_PORT_PB_DIR, dir1, output));
+
+	return 0;
+}
+
+static int __init
+i2c_register(void)
+{
+	int res;
+
+	i2c_init();
+  	res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops);
+	if(res < 0) {
+		printk(KERN_ERR "i2c: couldn't get a major number.\n");
+		return res;
+	}
+
+	printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n");
+	
+	return 0;
+}
+
+/* this makes sure that i2c_register is called during boot */
+
+module_init(i2c_register);
+
+/****************** END OF FILE i2c.c ********************************/