Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 132 insertions, 0 deletions

diff --git a/arch/cris/arch-v10/kernel/traps.c b/arch/cris/arch-v10/kernel/traps.c
new file mode 100644
index 00000000000..da491f438a6
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/traps.c
@@ -0,0 +1,132 @@
+/* $Id: traps.c,v 1.2 2003/07/04 08:27:41 starvik Exp $
+ *
+ *  linux/arch/cris/arch-v10/traps.c
+ *
+ *  Heler functions for trap handlers
+ * 
+ *  Copyright (C) 2000-2002 Axis Communications AB
+ *
+ *  Authors:   Bjorn Wesen
+ *  	       Hans-Peter Nilsson
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/ptrace.h>
+#include <asm/uaccess.h>
+#include <asm/arch/sv_addr_ag.h>
+
+void 
+show_registers(struct pt_regs * regs)
+{
+	/* We either use rdusp() - the USP register, which might not
+	   correspond to the current process for all cases we're called,
+	   or we use the current->thread.usp, which is not up to date for
+	   the current process.  Experience shows we want the USP
+	   register.  */
+	unsigned long usp = rdusp();
+
+	printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n",
+	       regs->irp, regs->srp, regs->dccr, usp, regs->mof );
+	printk(" r0: %08lx  r1: %08lx   r2: %08lx  r3: %08lx\n",
+	       regs->r0, regs->r1, regs->r2, regs->r3);
+	printk(" r4: %08lx  r5: %08lx   r6: %08lx  r7: %08lx\n",
+	       regs->r4, regs->r5, regs->r6, regs->r7);
+	printk(" r8: %08lx  r9: %08lx  r10: %08lx r11: %08lx\n",
+	       regs->r8, regs->r9, regs->r10, regs->r11);
+	printk("r12: %08lx r13: %08lx oR10: %08lx\n",
+	       regs->r12, regs->r13, regs->orig_r10);
+	printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE);
+	printk("Process %s (pid: %d, stackpage=%08lx)\n",
+	       current->comm, current->pid, (unsigned long)current);
+
+	/*
+         * When in-kernel, we also print out the stack and code at the
+         * time of the fault..
+         */
+        if (! user_mode(regs)) {
+	  	int i;
+
+                show_stack(NULL, (unsigned long*)usp);
+
+		/* Dump kernel stack if the previous dump wasn't one.  */
+		if (usp != 0)
+			show_stack (NULL, NULL);
+
+                printk("\nCode: ");
+                if(regs->irp < PAGE_OFFSET)
+                        goto bad;
+
+		/* Often enough the value at regs->irp does not point to
+		   the interesting instruction, which is most often the
+		   _previous_ instruction.  So we dump at an offset large
+		   enough that instruction decoding should be in sync at
+		   the interesting point, but small enough to fit on a row
+		   (sort of).  We point out the regs->irp location in a
+		   ksymoops-friendly way by wrapping the byte for that
+		   address in parentheses.  */
+                for(i = -12; i < 12; i++)
+                {
+                        unsigned char c;
+                        if(__get_user(c, &((unsigned char*)regs->irp)[i])) {
+bad:
+                                printk(" Bad IP value.");
+                                break;
+                        }
+
+			if (i == 0)
+			  printk("(%02x) ", c);
+			else
+			  printk("%02x ", c);
+                }
+		printk("\n");
+        }
+}
+
+/* Called from entry.S when the watchdog has bitten
+ * We print out something resembling an oops dump, and if
+ * we have the nice doggy development flag set, we halt here
+ * instead of rebooting.
+ */
+
+extern void reset_watchdog(void);
+extern void stop_watchdog(void);
+
+
+void
+watchdog_bite_hook(struct pt_regs *regs)
+{
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+	local_irq_disable();
+	stop_watchdog();
+	show_registers(regs);
+	while(1) /* nothing */;
+#else
+	show_registers(regs);
+#endif	
+}
+
+/* This is normally the 'Oops' routine */
+void 
+die_if_kernel(const char * str, struct pt_regs * regs, long err)
+{
+	if(user_mode(regs))
+		return;
+
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+	/* This printout might take too long and trigger the 
+	 * watchdog normally. If we're in the nice doggy
+	 * development mode, stop the watchdog during printout.
+	 */
+	stop_watchdog();
+#endif
+
+	printk("%s: %04lx\n", str, err & 0xffff);
+
+	show_registers(regs);
+
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+	reset_watchdog();
+#endif
+	do_exit(SIGSEGV);
+}