Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>

6 files changed, 39 insertions, 37 deletions

diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
index 44eb1b9accb..c7ea9efd010 100644
--- a/arch/cris/arch-v10/Kconfig
+++ b/arch/cris/arch-v10/Kconfig
@@ -323,7 +323,7 @@ config ETRAX_DEF_R_WAITSTATES
 	depends on ETRAX_ARCH_V10
 	default "95a6"
 	help
-	  Waitstates for SRAM, Flash and peripherials (not DRAM).  95f8 is a
+	  Waitstates for SRAM, Flash and peripherals (not DRAM).  95f8 is a
 	  good choice for most Axis products...
 
 config ETRAX_DEF_R_BUS_CONFIG
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 734d5f3a530..e7e724bc0ba 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -839,7 +839,7 @@ config ETRAX_DS1302_TRICKLE_CHARGE
 	default "0"
 	help
 	  This controls the initial value of the trickle charge register.
-	  0 = disabled (use this if you are unsure or have a non rechargable battery)
+	  0 = disabled (use this if you are unsure or have a non rechargeable battery)
 	  Otherwise the following values can be OR:ed together to control the
 	  charge current:
 	  1 = 2kohm, 2 = 4kohm, 3 = 4kohm
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c
index 6e1f191a71e..284ebfda03f 100644
--- a/arch/cris/arch-v10/drivers/eeprom.c
+++ b/arch/cris/arch-v10/drivers/eeprom.c
@@ -1,7 +1,7 @@
 /*!*****************************************************************************
 *!
-*!  Implements an interface for i2c compatible eeproms to run under linux.
-*!  Supports 2k, 8k(?) and 16k. Uses adaptive timing adjustents by
+*!  Implements an interface for i2c compatible eeproms to run under Linux.
+*!  Supports 2k, 8k(?) and 16k. Uses adaptive timing adjustments by
 *!  Johan.Adolfsson@axis.com
 *!
 *!  Probing results:
@@ -51,7 +51,7 @@
 *!  Revision 1.8  2001/06/15 13:24:29  jonashg
 *!  * Added verification of pointers from userspace in read and write.
 *!  * Made busy counter volatile.
-*!  * Added define for inital write delay.
+*!  * Added define for initial write delay.
 *!  * Removed warnings by using loff_t instead of unsigned long.
 *!
 *!  Revision 1.7  2001/06/14 15:26:54  jonashg
diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c
index 6114596c3b3..092c724a645 100644
--- a/arch/cris/arch-v10/drivers/i2c.c
+++ b/arch/cris/arch-v10/drivers/i2c.c
@@ -47,7 +47,7 @@
 *! Update Port B register and shadow even when running with hardware support
 *!   to avoid glitches when reading bits
 *! Never set direction to out in i2c_inbyte
-*! Removed incorrect clock togling at end of i2c_inbyte
+*! Removed incorrect clock toggling at end of i2c_inbyte
 *!
 *! Revision 1.8  2002/08/13 06:31:53  starvik
 *! Made SDA and SCL line configurable
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index 34528da9881..07628a13c6c 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -33,7 +33,7 @@
 *!
 *! Revision 1.2  2002/11/19 14:35:24  starvik
 *! Changes from linux 2.4
-*! Changed struct initializer syntax to the currently prefered notation
+*! Changed struct initializer syntax to the currently preferred notation
 *!
 *! Revision 1.1  2001/12/17 13:59:27  bjornw
 *! Initial revision
diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c
index 22a6f0aa9ce..497634a6482 100644
--- a/arch/cris/arch-v10/lib/old_checksum.c
+++ b/arch/cris/arch-v10/lib/old_checksum.c
@@ -47,39 +47,41 @@
 
 #include <asm/delay.h>
 
-unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum)
+__wsum csum_partial(const void *p, int len, __wsum __sum)
 {
-  /*
-   * Experiments with ethernet and slip connections show that buff
-   * is aligned on either a 2-byte or 4-byte boundary.
-   */
-  const unsigned char *endMarker = buff + len;
-  const unsigned char *marker = endMarker - (len % 16);
+	u32 sum = (__force u32)__sum;
+	const u16 *buff = p;
+	/*
+	* Experiments with ethernet and slip connections show that buff
+	* is aligned on either a 2-byte or 4-byte boundary.
+	*/
+	const void *endMarker = p + len;
+	const void *marker = endMarker - (len % 16);
 #if 0
-  if((int)buff & 0x3)
-    printk("unaligned buff %p\n", buff);
-  __delay(900); /* extra delay of 90 us to test performance hit */
+	if((int)buff & 0x3)
+		printk("unaligned buff %p\n", buff);
+	__delay(900); /* extra delay of 90 us to test performance hit */
 #endif
-  BITON;
-  while (buff < marker) {
-    sum += *((unsigned short *)buff)++;
-    sum += *((unsigned short *)buff)++;
-    sum += *((unsigned short *)buff)++;
-    sum += *((unsigned short *)buff)++;
-    sum += *((unsigned short *)buff)++;
-    sum += *((unsigned short *)buff)++;
-    sum += *((unsigned short *)buff)++;
-    sum += *((unsigned short *)buff)++;
-  }
-  marker = endMarker - (len % 2);
-  while(buff < marker) {
-    sum += *((unsigned short *)buff)++;
-  }
-  if(endMarker - buff > 0) {
-    sum += *buff;                 /* add extra byte seperately */
-  }
-  BITOFF;
-  return(sum);
+	BITON;
+	while (buff < marker) {
+		sum += *buff++;
+		sum += *buff++;
+		sum += *buff++;
+		sum += *buff++;
+		sum += *buff++;
+		sum += *buff++;
+		sum += *buff++;
+		sum += *buff++;
+	}
+	marker = endMarker - (len % 2);
+	while (buff < marker)
+		sum += *buff++;
+
+	if (endMarker > buff)
+		sum += *(const u8 *)buff;	/* add extra byte seperately */
+
+	BITOFF;
+	return (__force __wsum)sum;
 }
 
 EXPORT_SYMBOL(csum_partial);