diff options
author | Jesper Nilsson <jesper.nilsson@axis.com> | 2008-02-08 16:28:36 +0100 |
---|---|---|
committer | Jesper Nilsson <jesper.nilsson@axis.com> | 2008-02-08 16:28:36 +0100 |
commit | a34d24425e9c133e875a26c0bbc91783cf485b93 (patch) | |
tree | 86f0d6481a0b4f369fbcb7e2bc7eeb4513683570 /arch/cris/arch-v32/drivers | |
parent | 7800029df321b033ef27122fbb599ee0a839eb53 (diff) |
CRIS v32: Rewrite ARTPEC-3 gpio driver to avoid volatiles and general cleanup.
Changes as suggested by Andrew Morton, plus general cleanup to
ease later consolidation of driver into machine common driver.
- Correct parameter type of gpio_write to const char __user *
- Remove volatile from the arrays of machine dependent registers, use
readl and writel to access them instead.
- Remove useless casts of void.
- Use spin_lock_irqsave for locking.
- Break gpio_write into smaller sub-functions.
- Remove useless breaks after returns.
- Don't perform any change in IO_CFG_WRITE_MODE if values are invalid.
(previously values were set and then set to zero)
- Change cast for copy_to_user to (void __user *)
- Make file_operations gpio_fops static and const.
- Make setget_output static. (However, it's still inline since the CRIS
architecture is still not SMP, which makes the function small enough
to inline)
Diffstat (limited to 'arch/cris/arch-v32/drivers')
-rw-r--r-- | arch/cris/arch-v32/drivers/mach-a3/gpio.c | 348 |
1 files changed, 174 insertions, 174 deletions
diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c index 30a2b6e526d..de107dad9f4 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c +++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c @@ -72,13 +72,13 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg); #endif static int gpio_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); -static ssize_t gpio_write(struct file *file, const char *buf, size_t count, - loff_t *off); + unsigned int cmd, unsigned long arg); +static ssize_t gpio_write(struct file *file, const char __user *buf, + size_t count, loff_t *off); static int gpio_open(struct inode *inode, struct file *filp); static int gpio_release(struct inode *inode, struct file *filp); static unsigned int gpio_poll(struct file *filp, - struct poll_table_struct *wait); + struct poll_table_struct *wait); /* private data per open() of this driver */ @@ -96,6 +96,10 @@ struct gpio_private { }; static void gpio_set_alarm(struct gpio_private *priv); +static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg); +static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, + unsigned long arg); + /* linked list of alarms to check for */ @@ -103,23 +107,23 @@ static struct gpio_private *alarmlist; static int wanted_interrupts; -static DEFINE_SPINLOCK(alarm_lock); +static DEFINE_SPINLOCK(gpio_lock); #define NUM_PORTS (GPIO_MINOR_LAST+1) #define GIO_REG_RD_ADDR(reg) \ - (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg) + (unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg) #define GIO_REG_WR_ADDR(reg) \ - (volatile unsigned long *)(regi_gio + REG_WR_ADDR_gio_##reg) -unsigned long led_dummy; -unsigned long port_d_dummy; /* Only input on Artpec-3 */ -unsigned long port_e_dummy; /* Non existent on Artpec-3 */ + (unsigned long *)(regi_gio + REG_WR_ADDR_gio_##reg) +static unsigned long led_dummy; +static unsigned long port_d_dummy; /* Only input on Artpec-3 */ #ifdef CONFIG_ETRAX_VIRTUAL_GPIO +static unsigned long port_e_dummy; /* Non existent on Artpec-3 */ static unsigned long virtual_dummy; static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE; static unsigned short cached_virtual_gpio_read; #endif -static volatile unsigned long *data_out[NUM_PORTS] = { +static unsigned long *data_out[NUM_PORTS] = { GIO_REG_WR_ADDR(rw_pa_dout), GIO_REG_WR_ADDR(rw_pb_dout), &led_dummy, @@ -131,7 +135,7 @@ static volatile unsigned long *data_out[NUM_PORTS] = { #endif }; -static volatile unsigned long *data_in[NUM_PORTS] = { +static unsigned long *data_in[NUM_PORTS] = { GIO_REG_RD_ADDR(r_pa_din), GIO_REG_RD_ADDR(r_pb_din), &led_dummy, @@ -167,7 +171,7 @@ static unsigned long changeable_bits[NUM_PORTS] = { #endif }; -static volatile unsigned long *dir_oe[NUM_PORTS] = { +static unsigned long *dir_oe[NUM_PORTS] = { GIO_REG_WR_ADDR(rw_pa_oe), GIO_REG_WR_ADDR(rw_pb_oe), &led_dummy, @@ -179,8 +183,7 @@ static volatile unsigned long *dir_oe[NUM_PORTS] = { #endif }; -static void -gpio_set_alarm(struct gpio_private *priv) +static void gpio_set_alarm(struct gpio_private *priv) { int bit; int intr_cfg; @@ -188,7 +191,7 @@ gpio_set_alarm(struct gpio_private *priv) int pins; unsigned long flags; - local_irq_save(flags); + spin_lock_irqsave(&gpio_lock, flags); intr_cfg = REG_RD_INT(gio, regi_gio, rw_intr_cfg); pins = REG_RD_INT(gio, regi_gio, rw_intr_pins); mask = REG_RD_INT(gio, regi_gio, rw_intr_mask) & I2C_INTERRUPT_BITS; @@ -218,14 +221,13 @@ gpio_set_alarm(struct gpio_private *priv) REG_WR_INT(gio, regi_gio, rw_intr_pins, pins); REG_WR_INT(gio, regi_gio, rw_intr_mask, mask); - local_irq_restore(flags); + spin_unlock_irqrestore(&gpio_lock, flags); } -static unsigned int -gpio_poll(struct file *file, struct poll_table_struct *wait) +static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait) { unsigned int mask = 0; - struct gpio_private *priv = (struct gpio_private *)file->private_data; + struct gpio_private *priv = file->private_data; unsigned long data; unsigned long tmp; @@ -235,7 +237,7 @@ gpio_poll(struct file *file, struct poll_table_struct *wait) poll_wait(file, &priv->alarm_wq, wait); if (priv->minor <= GPIO_MINOR_D) { - data = *data_in[priv->minor]; + data = readl(data_in[priv->minor]); REG_WR_INT(gio, regi_gio, rw_ack_intr, wanted_interrupts); tmp = REG_RD_INT(gio, regi_gio, rw_intr_mask); tmp &= I2C_INTERRUPT_BITS; @@ -251,12 +253,12 @@ gpio_poll(struct file *file, struct poll_table_struct *wait) return mask; } -static irqreturn_t -gpio_interrupt(int irq, void *dev_id) +static irqreturn_t gpio_interrupt(int irq, void *dev_id) { reg_gio_rw_intr_mask intr_mask; reg_gio_r_masked_intr masked_intr; reg_gio_rw_ack_intr ack_intr; + unsigned long flags; unsigned long tmp; unsigned long tmp2; #ifdef CONFIG_ETRAX_VIRTUAL_GPIO @@ -268,9 +270,9 @@ gpio_interrupt(int irq, void *dev_id) tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr); /* Find those that we have enabled */ - spin_lock(&alarm_lock); + spin_lock_irqsave(&gpio_lock, flags); tmp &= wanted_interrupts; - spin_unlock(&alarm_lock); + spin_unlock_irqrestore(&gpio_lock, flags); #ifdef CONFIG_ETRAX_VIRTUAL_GPIO /* Something changed on virtual GPIO. Interrupt is acked by @@ -304,15 +306,42 @@ gpio_interrupt(int irq, void *dev_id) return IRQ_RETVAL(tmp); } +static void gpio_write_bit(unsigned long *port, unsigned char data, int bit, + unsigned char clk_mask, unsigned char data_mask) +{ + unsigned long shadow = readl(port) & ~clk_mask; + writel(shadow, port); + if (data & 1 << bit) + shadow |= data_mask; + else + shadow &= ~data_mask; + writel(shadow, port); + /* For FPGA: min 5.0ns (DCC) before CCLK high */ + shadow |= clk_mask; + writel(shadow, port); +} + +static void gpio_write_byte(struct gpio_private *priv, unsigned long *port, + unsigned char data) +{ + int i; + + if (priv->write_msb) + for (i = 7; i >= 0; i--) + gpio_write_bit(port, data, i, priv->clk_mask, + priv->data_mask); + else + for (i = 0; i <= 7; i++) + gpio_write_bit(port, data, i, priv->clk_mask, + priv->data_mask); +} + -static ssize_t gpio_write(struct file *file, const char *buf, size_t count, - loff_t *off) +static ssize_t gpio_write(struct file *file, const char __user *buf, + size_t count, loff_t *off) { - struct gpio_private *priv = (struct gpio_private *)file->private_data; - unsigned char data, clk_mask, data_mask, write_msb; + struct gpio_private *priv = file->private_data; unsigned long flags; - unsigned long shadow; - volatile unsigned long *port; ssize_t retval = count; /* Only bits 0-7 may be used for write operations but allow all devices except leds... */ @@ -330,55 +359,25 @@ static ssize_t gpio_write(struct file *file, const char *buf, size_t count, if (!access_ok(VERIFY_READ, buf, count)) return -EFAULT; - clk_mask = priv->clk_mask; - data_mask = priv->data_mask; /* It must have been configured using the IO_CFG_WRITE_MODE */ /* Perhaps a better error code? */ - if (clk_mask == 0 || data_mask == 0) + if (priv->clk_mask == 0 || priv->data_mask == 0) return -EPERM; - write_msb = priv->write_msb; D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X " "msb: %i\n", - count, data_mask, clk_mask, write_msb)); - port = data_out[priv->minor]; - - while (count--) { - int i; - data = *buf++; - if (priv->write_msb) { - for (i = 7; i >= 0; i--) { - local_irq_save(flags); - shadow = *port; - *port = shadow &= ~clk_mask; - if (data & 1<<i) - *port = shadow |= data_mask; - else - *port = shadow &= ~data_mask; - /* For FPGA: min 5.0ns (DCC) before CCLK high */ - *port = shadow |= clk_mask; - local_irq_restore(flags); - } - } else { - for (i = 0; i <= 7; i++) { - local_irq_save(flags); - shadow = *port; - *port = shadow &= ~clk_mask; - if (data & 1<<i) - *port = shadow |= data_mask; - else - *port = shadow &= ~data_mask; - /* For FPGA: min 5.0ns (DCC) before CCLK high */ - *port = shadow |= clk_mask; - local_irq_restore(flags); - } - } - } + count, priv->data_mask, priv->clk_mask, priv->write_msb)); + + spin_lock_irqsave(&gpio_lock, flags); + + while (count--) + gpio_write_byte(priv, data_out[priv->minor], *buf++); + + spin_unlock_irqrestore(&gpio_lock, flags); return retval; } -static int -gpio_open(struct inode *inode, struct file *filp) +static int gpio_open(struct inode *inode, struct file *filp) { struct gpio_private *priv; int p = iminor(inode); @@ -394,7 +393,7 @@ gpio_open(struct inode *inode, struct file *filp) memset(priv, 0, sizeof(*priv)); priv->minor = p; - filp->private_data = (void *)priv; + filp->private_data = priv; /* initialize the io/alarm struct, not for PWM ports though */ if (p <= GPIO_MINOR_LAST) { @@ -407,17 +406,16 @@ gpio_open(struct inode *inode, struct file *filp) init_waitqueue_head(&priv->alarm_wq); /* link it into our alarmlist */ - spin_lock_irq(&alarm_lock); + spin_lock_irq(&gpio_lock); priv->next = alarmlist; alarmlist = priv; - spin_unlock_irq(&alarm_lock); + spin_unlock_irq(&gpio_lock); } return 0; } -static int -gpio_release(struct inode *inode, struct file *filp) +static int gpio_release(struct inode *inode, struct file *filp) { struct gpio_private *p; struct gpio_private *todel; @@ -425,11 +423,11 @@ gpio_release(struct inode *inode, struct file *filp) unsigned long a_high, a_low; /* prepare to free private structure */ - todel = (struct gpio_private *)filp->private_data; + todel = filp->private_data; /* unlink from alarmlist - only for non-PWM ports though */ if (todel->minor <= GPIO_MINOR_LAST) { - spin_lock_irq(&alarm_lock); + spin_lock_irq(&gpio_lock); p = alarmlist; if (p == todel) @@ -463,7 +461,7 @@ gpio_release(struct inode *inode, struct file *filp) a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); #endif - spin_unlock_irq(&alarm_lock); + spin_unlock_irq(&gpio_lock); } kfree(todel); @@ -482,11 +480,13 @@ inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg) unsigned long flags; unsigned long dir_shadow; - local_irq_save(flags); - dir_shadow = *dir_oe[priv->minor]; - dir_shadow &= ~(arg & changeable_dir[priv->minor]); - *dir_oe[priv->minor] = dir_shadow; - local_irq_restore(flags); + spin_lock_irqsave(&gpio_lock, flags); + + dir_shadow = readl(dir_oe[priv->minor]) & + ~(arg & changeable_dir[priv->minor]); + writel(dir_shadow, dir_oe[priv->minor]); + + spin_unlock_irqrestore(&gpio_lock, flags); if (priv->minor == GPIO_MINOR_C) dir_shadow ^= 0xFFFF; /* Only 16 bits */ @@ -501,36 +501,32 @@ inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg) } /* setget_input */ -inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg) +static inline unsigned long setget_output(struct gpio_private *priv, + unsigned long arg) { unsigned long flags; unsigned long dir_shadow; - local_irq_save(flags); - dir_shadow = *dir_oe[priv->minor]; - dir_shadow |= (arg & changeable_dir[priv->minor]); - *dir_oe[priv->minor] = dir_shadow; - local_irq_restore(flags); - return dir_shadow; -} /* setget_output */ + spin_lock_irqsave(&gpio_lock, flags); -static int -gpio_leds_ioctl(unsigned int cmd, unsigned long arg); + dir_shadow = readl(dir_oe[priv->minor]) | + (arg & changeable_dir[priv->minor]); + writel(dir_shadow, dir_oe[priv->minor]); -static int -gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, unsigned long arg); + spin_unlock_irqrestore(&gpio_lock, flags); + return dir_shadow; +} /* setget_output */ -static int -gpio_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static int gpio_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) { unsigned long flags; unsigned long val; unsigned long shadow; - struct gpio_private *priv = (struct gpio_private *)file->private_data; + struct gpio_private *priv = file->private_data; if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) - return -EINVAL; + return -ENOTTY; /* Check for special ioctl handlers first */ @@ -549,23 +545,22 @@ gpio_ioctl(struct inode *inode, struct file *file, switch (_IOC_NR(cmd)) { case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ /* Read the port. */ - return *data_in[priv->minor]; - break; + return readl(data_in[priv->minor]); case IO_SETBITS: - local_irq_save(flags); + spin_lock_irqsave(&gpio_lock, flags); /* Set changeable bits with a 1 in arg. */ - shadow = *data_out[priv->minor]; - shadow |= (arg & changeable_bits[priv->minor]); - *data_out[priv->minor] = shadow; - local_irq_restore(flags); + shadow = readl(data_out[priv->minor]) | + (arg & changeable_bits[priv->minor]); + writel(shadow, data_out[priv->minor]); + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_CLRBITS: - local_irq_save(flags); + spin_lock_irqsave(&gpio_lock, flags); /* Clear changeable bits with a 1 in arg. */ - shadow = *data_out[priv->minor]; - shadow &= ~(arg & changeable_bits[priv->minor]); - *data_out[priv->minor] = shadow; - local_irq_restore(flags); + shadow = readl(data_out[priv->minor]) & + ~(arg & changeable_bits[priv->minor]); + writel(shadow, data_out[priv->minor]); + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_HIGHALARM: /* Set alarm when bits with 1 in arg go high. */ @@ -585,13 +580,14 @@ gpio_ioctl(struct inode *inode, struct file *file, break; case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ /* Read direction 0=input 1=output */ - return *dir_oe[priv->minor]; + return readl(dir_oe[priv->minor]); + case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ /* Set direction 0=unchanged 1=input, * return mask with 1=input */ return setget_input(priv, arg); - break; + case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ /* Set direction 0=unchanged 1=output, * return mask with 1=output @@ -600,56 +596,61 @@ gpio_ioctl(struct inode *inode, struct file *file, case IO_CFG_WRITE_MODE: { - unsigned long dir_shadow; - dir_shadow = *dir_oe[priv->minor]; + int res = -EPERM; + unsigned long dir_shadow, clk_mask, data_mask, write_msb; + + clk_mask = arg & 0xFF; + data_mask = (arg >> 8) & 0xFF; + write_msb = (arg >> 16) & 0x01; - priv->clk_mask = arg & 0xFF; - priv->data_mask = (arg >> 8) & 0xFF; - priv->write_msb = (arg >> 16) & 0x01; /* Check if we're allowed to change the bits and * the direction is correct */ - if (!((priv->clk_mask & changeable_bits[priv->minor]) && - (priv->data_mask & changeable_bits[priv->minor]) && - (priv->clk_mask & dir_shadow) && - (priv->data_mask & dir_shadow))) { - priv->clk_mask = 0; - priv->data_mask = 0; - return -EPERM; + spin_lock_irqsave(&gpio_lock, flags); + dir_shadow = readl(dir_oe[priv->minor]); + if ((clk_mask & changeable_bits[priv->minor]) && + (data_mask & changeable_bits[priv->minor]) && + (clk_mask & dir_shadow) && + (data_mask & dir_shadow)) { + priv->clk_mask = clk_mask; + priv->data_mask = data_mask; + priv->write_msb = write_msb; + res = 0; } - break; + spin_unlock_irqrestore(&gpio_lock, flags); + + return res; } case IO_READ_INBITS: /* *arg is result of reading the input pins */ - val = *data_in[priv->minor]; - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) + val = readl(data_in[priv->minor]); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) return -EFAULT; return 0; - break; case IO_READ_OUTBITS: /* *arg is result of reading the output shadow */ val = *data_out[priv->minor]; - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) + if (copy_to_user((void __user *)arg, &val, sizeof(val))) return -EFAULT; break; case IO_SETGET_INPUT: /* bits set in *arg is set to input, * *arg updated with current input pins. */ - if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) return -EFAULT; val = setget_input(priv, val); - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) + if (copy_to_user((void __user *)arg, &val, sizeof(val))) return -EFAULT; break; case IO_SETGET_OUTPUT: /* bits set in *arg is set to output, * *arg updated with current output pins. */ - if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) return -EFAULT; val = setget_output(priv, val); - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) + if (copy_to_user((void __user *)arg, &val, sizeof(val))) return -EFAULT; break; default: @@ -660,32 +661,32 @@ gpio_ioctl(struct inode *inode, struct file *file, } #ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static int -virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { unsigned long flags; unsigned short val; unsigned short shadow; - struct gpio_private *priv = (struct gpio_private *)file->private_data; + struct gpio_private *priv = file->private_data; switch (_IOC_NR(cmd)) { case IO_SETBITS: - local_irq_save(flags); + spin_lock_irqsave(&gpio_lock, flags); /* Set changeable bits with a 1 in arg. */ i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - shadow |= ~*dir_oe[priv->minor]; - shadow |= (arg & changeable_bits[priv->minor]); + shadow |= ~readl(dir_oe[priv->minor]) | + (arg & changeable_bits[priv->minor]); i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - local_irq_restore(flags); + spin_lock_irqrestore(&gpio_lock, flags); break; case IO_CLRBITS: - local_irq_save(flags); + spin_lock_irqsave(&gpio_lock, flags); /* Clear changeable bits with a 1 in arg. */ i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - shadow |= ~*dir_oe[priv->minor]; - shadow &= ~(arg & changeable_bits[priv->minor]); + shadow |= ~readl(dir_oe[priv->minor]) & + ~(arg & changeable_bits[priv->minor]); i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - local_irq_restore(flags); + spin_lock_irqrestore(&gpio_lock, flags); break; case IO_HIGHALARM: /* Set alarm when bits with 1 in arg go high. */ @@ -703,7 +704,7 @@ virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case IO_CFG_WRITE_MODE: { unsigned long dir_shadow; - dir_shadow = *dir_oe[priv->minor]; + dir_shadow = readl(dir_oe[priv->minor]); priv->clk_mask = arg & 0xFF; priv->data_mask = (arg >> 8) & 0xFF; @@ -723,17 +724,16 @@ virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } case IO_READ_INBITS: /* *arg is result of reading the input pins */ - val = cached_virtual_gpio_read; - val &= ~*dir_oe[priv->minor]; - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) + val = cached_virtual_gpio_read & ~readl(dir_oe[priv->minor]); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) return -EFAULT; return 0; - break; + case IO_READ_OUTBITS: /* *arg is result of reading the output shadow */ i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val)); - val &= *dir_oe[priv->minor]; - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) + val &= readl(dir_oe[priv->minor]); + if (copy_to_user((void __user *)arg, &val, sizeof(val))) return -EFAULT; break; case IO_SETGET_INPUT: @@ -741,11 +741,11 @@ virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) /* bits set in *arg is set to input, * *arg updated with current input pins. */ - unsigned short input_mask = ~*dir_oe[priv->minor]; - if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) + unsigned short input_mask = ~readl(dir_oe[priv->minor]); + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) return -EFAULT; val = setget_input(priv, val); - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) + if (copy_to_user((void __user *)arg, &val, sizeof(val))) return -EFAULT; if ((input_mask & val) != input_mask) { /* Input pins changed. All ports desired as input @@ -765,10 +765,10 @@ virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) /* bits set in *arg is set to output, * *arg updated with current output pins. */ - if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) + if (copy_from_user(&val, (void __user *)arg, sizeof(val))) return -EFAULT; val = setget_output(priv, val); - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) + if (copy_to_user((void __user *)arg, &val, sizeof(val))) return -EFAULT; break; default: @@ -778,8 +778,7 @@ virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } #endif /* CONFIG_ETRAX_VIRTUAL_GPIO */ -static int -gpio_leds_ioctl(unsigned int cmd, unsigned long arg) +static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg) { unsigned char green; unsigned char red; @@ -829,8 +828,7 @@ static int gpio_pwm_set_period(unsigned long arg, int pwm_port) struct io_pwm_set_period periods; reg_gio_rw_pwm0_var rw_pwm_widths; - if (copy_from_user(&periods, (struct io_pwm_set_period *) arg, - sizeof(periods))) + if (copy_from_user(&periods, (void __user *)arg, sizeof(periods))) return -EFAULT; if (periods.lo > 8191 || periods.hi > 8191) return -EINVAL; @@ -856,8 +854,8 @@ static int gpio_pwm_set_duty(unsigned long arg, int pwm_port) return 0; } -static int -gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, unsigned long arg) +static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, + unsigned long arg) { int pwm_port = priv->minor - GPIO_MINOR_PWM0; @@ -874,7 +872,7 @@ gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, unsigned long arg) return 0; } -struct file_operations gpio_fops = { +static const struct file_operations gpio_fops = { .owner = THIS_MODULE, .poll = gpio_poll, .ioctl = gpio_ioctl, @@ -884,8 +882,7 @@ struct file_operations gpio_fops = { }; #ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static void -virtual_gpio_init(void) +static void __init virtual_gpio_init(void) { reg_gio_rw_intr_cfg intr_cfg; reg_gio_rw_intr_mask intr_mask; @@ -943,11 +940,13 @@ virtual_gpio_init(void) /* main driver initialization routine, called from mem.c */ -static __init int -gpio_init(void) +static int __init gpio_init(void) { int res; + printk(KERN_INFO "ETRAX FS GPIO driver v2.7, (c) 2003-2008 " + "Axis Communications AB\n"); + /* do the formalities */ res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops); @@ -963,11 +962,12 @@ gpio_init(void) CRIS_LED_DISK_READ(0); CRIS_LED_DISK_WRITE(0); - printk(KERN_INFO "ETRAX FS GPIO driver v2.6, (c) 2003-2007 " - "Axis Communications AB\n"); - if (request_irq(GIO_INTR_VECT, gpio_interrupt, - IRQF_SHARED | IRQF_DISABLED, "gpio", &alarmlist)) + int res2 = request_irq(GIO_INTR_VECT, gpio_interrupt, + IRQF_SHARED | IRQF_DISABLED, "gpio", &alarmlist); + if (res2) { printk(KERN_ERR "err: irq for gpio\n"); + return res2; + } /* No IRQs by default. */ REG_WR_INT(gio, regi_gio, rw_intr_pins, 0); |