[PATCH] CRIS update: new subarchitecture v32

New CRIS sub architecture named v32.

From: Dave Jones <davej@redhat.com>

	Fix swapped kmalloc args

Signed-off-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 341 insertions, 0 deletions

diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
new file mode 100644
index 00000000000..d48e397f5fa
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -0,0 +1,341 @@
+/* $Id: time.c,v 1.19 2005/04/29 05:40:09 starvik Exp $
+ *
+ *  linux/arch/cris/arch-v32/kernel/time.c
+ *
+ *  Copyright (C) 2003 Axis Communications AB
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/timex.h>
+#include <linux/time.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/swap.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <asm/types.h>
+#include <asm/signal.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/rtc.h>
+#include <asm/irq.h>
+
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/timer_defs.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+
+/* Watchdog defines */
+#define ETRAX_WD_KEY_MASK 0x7F /* key is 7 bit */
+#define ETRAX_WD_HZ       763 /* watchdog counts at 763 Hz */
+#define ETRAX_WD_CNT      ((2*ETRAX_WD_HZ)/HZ + 1) /* Number of 763 counts before watchdog bites */
+
+unsigned long timer_regs[NR_CPUS] =
+{
+  regi_timer,
+#ifdef CONFIG_SMP
+  regi_timer2
+#endif
+};
+
+extern void update_xtime_from_cmos(void);
+extern int set_rtc_mmss(unsigned long nowtime);
+extern int setup_irq(int, struct irqaction *);
+extern int have_rtc;
+
+unsigned long get_ns_in_jiffie(void)
+{
+	reg_timer_r_tmr0_data data;
+	unsigned long ns;
+
+	data = REG_RD(timer, regi_timer, r_tmr0_data);
+	ns = (TIMER0_DIV - data) * 10;
+	return ns;
+}
+
+unsigned long do_slow_gettimeoffset(void)
+{
+	unsigned long count;
+	unsigned long usec_count = 0;
+
+	static unsigned long count_p = TIMER0_DIV;/* for the first call after boot */
+	static unsigned long jiffies_p = 0;
+
+	/*
+	 * cache volatile jiffies temporarily; we have IRQs turned off.
+	 */
+	unsigned long jiffies_t;
+
+	/* The timer interrupt comes from Etrax timer 0. In order to get
+	 * better precision, we check the current value. It might have
+	 * underflowed already though.
+	 */
+
+	count = REG_RD(timer, regi_timer, r_tmr0_data);
+ 	jiffies_t = jiffies;
+
+	/*
+	 * avoiding timer inconsistencies (they are rare, but they happen)...
+	 * there are one problem that must be avoided here:
+	 *  1. the timer counter underflows
+	 */
+	if( jiffies_t == jiffies_p ) {
+		if( count > count_p ) {
+			/* Timer wrapped, use new count and prescale
+			 * increase the time corresponding to one jiffie
+			 */
+			usec_count = 1000000/HZ;
+		}
+	} else
+		jiffies_p = jiffies_t;
+        count_p = count;
+	/* Convert timer value to usec */
+	/* 100 MHz timer, divide by 100 to get usec */
+	usec_count +=  (TIMER0_DIV - count) / 100;
+	return usec_count;
+}
+
+/* From timer MDS describing the hardware watchdog:
+ * 4.3.1 Watchdog Operation
+ * The watchdog timer is an 8-bit timer with a configurable start value.
+ * Once started the whatchdog counts downwards with a frequency of 763 Hz
+ * (100/131072 MHz). When the watchdog counts down to 1, it generates an
+ * NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the
+ * chip.
+ */
+/* This gives us 1.3 ms to do something useful when the NMI comes */
+
+/* right now, starting the watchdog is the same as resetting it */
+#define start_watchdog reset_watchdog
+
+#if defined(CONFIG_ETRAX_WATCHDOG)
+static short int watchdog_key = 42;  /* arbitrary 7 bit number */
+#endif
+
+/* number of pages to consider "out of memory". it is normal that the memory
+ * is used though, so put this really low.
+ */
+
+#define WATCHDOG_MIN_FREE_PAGES 8
+
+void
+reset_watchdog(void)
+{
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
+
+	/* only keep watchdog happy as long as we have memory left! */
+	if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) {
+		/* reset the watchdog with the inverse of the old key */
+		watchdog_key ^= ETRAX_WD_KEY_MASK; /* invert key, which is 7 bits */
+		wd_ctrl.cnt = ETRAX_WD_CNT;
+		wd_ctrl.cmd = regk_timer_start;
+		wd_ctrl.key = watchdog_key;
+		REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl);
+	}
+#endif
+}
+
+/* stop the watchdog - we still need the correct key */
+
+void
+stop_watchdog(void)
+{
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
+	watchdog_key ^= ETRAX_WD_KEY_MASK; /* invert key, which is 7 bits */
+	wd_ctrl.cnt = ETRAX_WD_CNT;
+	wd_ctrl.cmd = regk_timer_stop;
+	wd_ctrl.key = watchdog_key;
+	REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl);
+#endif
+}
+
+extern void show_registers(struct pt_regs *regs);
+
+void
+handle_watchdog_bite(struct pt_regs* regs)
+{
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	extern int cause_of_death;
+
+	raw_printk("Watchdog bite\n");
+
+	/* Check if forced restart or unexpected watchdog */
+	if (cause_of_death == 0xbedead) {
+		while(1);
+	}
+
+	/* Unexpected watchdog, stop the watchdog and dump registers*/
+	stop_watchdog();
+	raw_printk("Oops: bitten by watchdog\n");
+        show_registers(regs);
+#ifndef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+	reset_watchdog();
+#endif
+	while(1) /* nothing */;
+#endif
+}
+
+/* last time the cmos clock got updated */
+static long last_rtc_update = 0;
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+
+//static unsigned short myjiff; /* used by our debug routine print_timestamp */
+
+extern void cris_do_profile(struct pt_regs *regs);
+
+static inline irqreturn_t
+timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+	reg_timer_r_masked_intr masked_intr;
+	reg_timer_rw_ack_intr ack_intr = { 0 };
+
+	/* Check if the timer interrupt is for us (a tmr0 int) */
+	masked_intr = REG_RD(timer, timer_regs[cpu], r_masked_intr);
+	if (!masked_intr.tmr0)
+		return IRQ_NONE;
+
+	/* acknowledge the timer irq */
+	ack_intr.tmr0 = 1;
+	REG_WR(timer, timer_regs[cpu], rw_ack_intr, ack_intr);
+
+	/* reset watchdog otherwise it resets us! */
+	reset_watchdog();
+
+        /* Update statistics. */
+	update_process_times(user_mode(regs));
+
+	cris_do_profile(regs); /* Save profiling information */
+
+	/* The master CPU is responsible for the time keeping. */
+	if (cpu != 0)
+		return IRQ_HANDLED;
+
+	/* call the real timer interrupt handler */
+	do_timer(regs);
+
+	/*
+	 * If we have an externally synchronized Linux clock, then update
+	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+	 * called as close as possible to 500 ms before the new second starts.
+	 *
+	 * The division here is not time critical since it will run once in
+	 * 11 minutes
+	 */
+	if ((time_status & STA_UNSYNC) == 0 &&
+	    xtime.tv_sec > last_rtc_update + 660 &&
+	    (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
+	    (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {
+		if (set_rtc_mmss(xtime.tv_sec) == 0)
+			last_rtc_update = xtime.tv_sec;
+		else
+			last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
+	}
+        return IRQ_HANDLED;
+}
+
+/* timer is SA_SHIRQ so drivers can add stuff to the timer irq chain
+ * it needs to be SA_INTERRUPT to make the jiffies update work properly
+ */
+
+static struct irqaction irq_timer  = { timer_interrupt, SA_SHIRQ | SA_INTERRUPT,
+				  CPU_MASK_NONE, "timer", NULL, NULL};
+
+void __init
+cris_timer_init(void)
+{
+	int cpu = smp_processor_id();
+  	reg_timer_rw_tmr0_ctrl tmr0_ctrl = { 0 };
+       	reg_timer_rw_tmr0_div tmr0_div = TIMER0_DIV;
+	reg_timer_rw_intr_mask timer_intr_mask;
+
+	/* Setup the etrax timers
+	 * Base frequency is 100MHz, divider 1000000 -> 100 HZ
+	 * We use timer0, so timer1 is free.
+	 * The trig timer is used by the fasttimer API if enabled.
+	 */
+
+       	tmr0_ctrl.op = regk_timer_ld;
+	tmr0_ctrl.freq = regk_timer_f100;
+       	REG_WR(timer, timer_regs[cpu], rw_tmr0_div, tmr0_div);
+       	REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Load */
+       	tmr0_ctrl.op = regk_timer_run;
+       	REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Start */
+
+       	/* enable the timer irq */
+       	timer_intr_mask = REG_RD(timer, timer_regs[cpu], rw_intr_mask);
+       	timer_intr_mask.tmr0 = 1;
+       	REG_WR(timer, timer_regs[cpu], rw_intr_mask, timer_intr_mask);
+}
+
+void __init
+time_init(void)
+{
+	reg_intr_vect_rw_mask intr_mask;
+
+	/* probe for the RTC and read it if it exists
+	 * Before the RTC can be probed the loops_per_usec variable needs
+	 * to be initialized to make usleep work. A better value for
+	 * loops_per_usec is calculated by the kernel later once the
+	 * clock has started.
+	 */
+	loops_per_usec = 50;
+
+	if(RTC_INIT() < 0) {
+		/* no RTC, start at 1980 */
+		xtime.tv_sec = 0;
+		xtime.tv_nsec = 0;
+		have_rtc = 0;
+	} else {
+		/* get the current time */
+		have_rtc = 1;
+		update_xtime_from_cmos();
+	}
+
+	/*
+	 * Initialize wall_to_monotonic such that adding it to xtime will yield zero, the
+	 * tv_nsec field must be normalized (i.e., 0 <= nsec < NSEC_PER_SEC).
+	 */
+	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
+
+	/* Start CPU local timer */
+	cris_timer_init();
+
+	/* enable the timer irq in global config */
+	intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+	intr_mask.timer = 1;
+	REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+
+	/* now actually register the timer irq handler that calls timer_interrupt() */
+
+	setup_irq(TIMER_INTR_VECT, &irq_timer);
+
+	/* enable watchdog if we should use one */
+
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	printk("Enabling watchdog...\n");
+	start_watchdog();
+
+	/* If we use the hardware watchdog, we want to trap it as an NMI
+	   and dump registers before it resets us.  For this to happen, we
+	   must set the "m" NMI enable flag (which once set, is unset only
+	   when an NMI is taken).
+
+	   The same goes for the external NMI, but that doesn't have any
+	   driver or infrastructure support yet.  */
+        {
+          unsigned long flags;
+          local_save_flags(flags);
+          flags |= (1<<30); /* NMI M flag is at bit 30 */
+          local_irq_restore(flags);
+        }
+#endif
+}