summaryrefslogtreecommitdiffstats
path: root/arch/cris/arch-v32/lib
diff options
context:
space:
mode:
authorMikael Starvik <mikael.starvik@axis.com>2005-07-27 11:44:44 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2005-07-27 16:26:01 -0700
commit51533b615e605d86154ec1b4e585c8ca1b0b15b7 (patch)
tree4a6d7d8494d2017632d83624fb71b36031e0e7e5 /arch/cris/arch-v32/lib
parent5d01e6ce785884a5db5792cd2e5bb36fa82fe23c (diff)
[PATCH] CRIS update: new subarchitecture v32
New CRIS sub architecture named v32. From: Dave Jones <davej@redhat.com> Fix swapped kmalloc args Signed-off-by: Mikael Starvik <starvik@axis.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'arch/cris/arch-v32/lib')
-rw-r--r--arch/cris/arch-v32/lib/Makefile6
-rw-r--r--arch/cris/arch-v32/lib/checksum.S111
-rw-r--r--arch/cris/arch-v32/lib/checksumcopy.S120
-rw-r--r--arch/cris/arch-v32/lib/csumcpfruser.S69
-rw-r--r--arch/cris/arch-v32/lib/dram_init.S120
-rw-r--r--arch/cris/arch-v32/lib/hw_settings.S73
-rw-r--r--arch/cris/arch-v32/lib/memset.c253
-rw-r--r--arch/cris/arch-v32/lib/nand_init.S179
-rw-r--r--arch/cris/arch-v32/lib/spinlock.S33
-rw-r--r--arch/cris/arch-v32/lib/string.c219
-rw-r--r--arch/cris/arch-v32/lib/usercopy.c470
11 files changed, 1653 insertions, 0 deletions
diff --git a/arch/cris/arch-v32/lib/Makefile b/arch/cris/arch-v32/lib/Makefile
new file mode 100644
index 00000000000..05b3ec6978d
--- /dev/null
+++ b/arch/cris/arch-v32/lib/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Etrax-specific library files..
+#
+
+lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o spinlock.o
+
diff --git a/arch/cris/arch-v32/lib/checksum.S b/arch/cris/arch-v32/lib/checksum.S
new file mode 100644
index 00000000000..32e66181b82
--- /dev/null
+++ b/arch/cris/arch-v32/lib/checksum.S
@@ -0,0 +1,111 @@
+/*
+ * A fast checksum routine using movem
+ * Copyright (c) 1998-2001, 2003 Axis Communications AB
+ *
+ * csum_partial(const unsigned char * buff, int len, unsigned int sum)
+ */
+
+ .globl csum_partial
+csum_partial:
+
+ ;; r10 - src
+ ;; r11 - length
+ ;; r12 - checksum
+
+ ;; check for breakeven length between movem and normal word looping versions
+ ;; we also do _NOT_ want to compute a checksum over more than the
+ ;; actual length when length < 40
+
+ cmpu.w 80,$r11
+ blo _word_loop
+ nop
+
+ ;; need to save the registers we use below in the movem loop
+ ;; this overhead is why we have a check above for breakeven length
+ ;; only r0 - r8 have to be saved, the other ones are clobber-able
+ ;; according to the ABI
+
+ subq 9*4,$sp
+ subq 10*4,$r11 ; update length for the first loop
+ movem $r8,[$sp]
+
+ ;; do a movem checksum
+
+_mloop: movem [$r10+],$r9 ; read 10 longwords
+
+ ;; perform dword checksumming on the 10 longwords
+
+ add.d $r0,$r12
+ addc $r1,$r12
+ addc $r2,$r12
+ addc $r3,$r12
+ addc $r4,$r12
+ addc $r5,$r12
+ addc $r6,$r12
+ addc $r7,$r12
+ addc $r8,$r12
+ addc $r9,$r12
+
+ ;; fold the carry into the checksum, to avoid having to loop the carry
+ ;; back into the top
+
+ addc 0,$r12
+ addc 0,$r12 ; do it again, since we might have generated a carry
+
+ subq 10*4,$r11
+ bge _mloop
+ nop
+
+ addq 10*4,$r11 ; compensate for last loop underflowing length
+
+ movem [$sp+],$r8 ; restore regs
+
+_word_loop:
+ ;; only fold if there is anything to fold.
+
+ cmpq 0,$r12
+ beq _no_fold
+
+ ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below.
+ ;; r9 and r13 can be used as temporaries.
+
+ moveq -1,$r9 ; put 0xffff in r9, faster than move.d 0xffff,r9
+ lsrq 16,$r9
+
+ move.d $r12,$r13
+ lsrq 16,$r13 ; r13 = checksum >> 16
+ and.d $r9,$r12 ; checksum = checksum & 0xffff
+ add.d $r13,$r12 ; checksum += r13
+ move.d $r12,$r13 ; do the same again, maybe we got a carry last add
+ lsrq 16,$r13
+ and.d $r9,$r12
+ add.d $r13,$r12
+
+_no_fold:
+ cmpq 2,$r11
+ blt _no_words
+ nop
+
+ ;; checksum the rest of the words
+
+ subq 2,$r11
+
+_wloop: subq 2,$r11
+ bge _wloop
+ addu.w [$r10+],$r12
+
+ addq 2,$r11
+
+_no_words:
+ ;; see if we have one odd byte more
+ cmpq 1,$r11
+ beq _do_byte
+ nop
+ ret
+ move.d $r12,$r10
+
+_do_byte:
+ ;; copy and checksum the last byte
+ addu.b [$r10],$r12
+ ret
+ move.d $r12,$r10
diff --git a/arch/cris/arch-v32/lib/checksumcopy.S b/arch/cris/arch-v32/lib/checksumcopy.S
new file mode 100644
index 00000000000..9303ccbadc6
--- /dev/null
+++ b/arch/cris/arch-v32/lib/checksumcopy.S
@@ -0,0 +1,120 @@
+/*
+ * A fast checksum+copy routine using movem
+ * Copyright (c) 1998, 2001, 2003 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen
+ *
+ * csum_partial_copy_nocheck(const char *src, char *dst,
+ * int len, unsigned int sum)
+ */
+
+ .globl csum_partial_copy_nocheck
+csum_partial_copy_nocheck:
+
+ ;; r10 - src
+ ;; r11 - dst
+ ;; r12 - length
+ ;; r13 - checksum
+
+ ;; check for breakeven length between movem and normal word looping versions
+ ;; we also do _NOT_ want to compute a checksum over more than the
+ ;; actual length when length < 40
+
+ cmpu.w 80,$r12
+ blo _word_loop
+ nop
+
+ ;; need to save the registers we use below in the movem loop
+ ;; this overhead is why we have a check above for breakeven length
+ ;; only r0 - r8 have to be saved, the other ones are clobber-able
+ ;; according to the ABI
+
+ subq 9*4,$sp
+ subq 10*4,$r12 ; update length for the first loop
+ movem $r8,[$sp]
+
+ ;; do a movem copy and checksum
+
+1: ;; A failing userspace access (the read) will have this as PC.
+_mloop: movem [$r10+],$r9 ; read 10 longwords
+ movem $r9,[$r11+] ; write 10 longwords
+
+ ;; perform dword checksumming on the 10 longwords
+
+ add.d $r0,$r13
+ addc $r1,$r13
+ addc $r2,$r13
+ addc $r3,$r13
+ addc $r4,$r13
+ addc $r5,$r13
+ addc $r6,$r13
+ addc $r7,$r13
+ addc $r8,$r13
+ addc $r9,$r13
+
+ ;; fold the carry into the checksum, to avoid having to loop the carry
+ ;; back into the top
+
+ addc 0,$r13
+ addc 0,$r13 ; do it again, since we might have generated a carry
+
+ subq 10*4,$r12
+ bge _mloop
+ nop
+
+ addq 10*4,$r12 ; compensate for last loop underflowing length
+
+ movem [$sp+],$r8 ; restore regs
+
+_word_loop:
+ ;; only fold if there is anything to fold.
+
+ cmpq 0,$r13
+ beq _no_fold
+
+ ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below
+ ;; r9 can be used as temporary.
+
+ move.d $r13,$r9
+ lsrq 16,$r9 ; r0 = checksum >> 16
+ and.d 0xffff,$r13 ; checksum = checksum & 0xffff
+ add.d $r9,$r13 ; checksum += r0
+ move.d $r13,$r9 ; do the same again, maybe we got a carry last add
+ lsrq 16,$r9
+ and.d 0xffff,$r13
+ add.d $r9,$r13
+
+_no_fold:
+ cmpq 2,$r12
+ blt _no_words
+ nop
+
+ ;; copy and checksum the rest of the words
+
+ subq 2,$r12
+
+2: ;; A failing userspace access for the read below will have this as PC.
+_wloop: move.w [$r10+],$r9
+ addu.w $r9,$r13
+ subq 2,$r12
+ bge _wloop
+ move.w $r9,[$r11+]
+
+ addq 2,$r12
+
+_no_words:
+ ;; see if we have one odd byte more
+ cmpq 1,$r12
+ beq _do_byte
+ nop
+ ret
+ move.d $r13,$r10
+
+_do_byte:
+ ;; copy and checksum the last byte
+3: ;; A failing userspace access for the read below will have this as PC.
+ move.b [$r10],$r9
+ addu.b $r9,$r13
+ move.b $r9,[$r11]
+ ret
+ move.d $r13,$r10
diff --git a/arch/cris/arch-v32/lib/csumcpfruser.S b/arch/cris/arch-v32/lib/csumcpfruser.S
new file mode 100644
index 00000000000..600ec16b9f2
--- /dev/null
+++ b/arch/cris/arch-v32/lib/csumcpfruser.S
@@ -0,0 +1,69 @@
+/*
+ * Add-on to transform csum_partial_copy_nocheck in checksumcopy.S into
+ * csum_partial_copy_from_user by adding exception records.
+ *
+ * Copyright (C) 2001, 2003 Axis Communications AB.
+ *
+ * Author: Hans-Peter Nilsson.
+ */
+
+#include <asm/errno.h>
+
+/* Same function body, but a different name. If we just added exception
+ records to _csum_partial_copy_nocheck and made it generic, we wouldn't
+ know a user fault from a kernel fault and we would have overhead in
+ each kernel caller for the error-pointer argument.
+
+ unsigned int csum_partial_copy_from_user
+ (const char *src, char *dst, int len, unsigned int sum, int *errptr);
+
+ Note that the errptr argument is only set if we encounter an error.
+ It is conveniently located on the stack, so the normal function body
+ does not have to handle it. */
+
+#define csum_partial_copy_nocheck csum_partial_copy_from_user
+
+/* There are local labels numbered 1, 2 and 3 present to mark the
+ different from-user accesses. */
+#include "checksumcopy.S"
+
+ .section .fixup,"ax"
+
+;; Here from the movem loop; restore stack.
+4:
+ movem [$sp+],$r8
+;; r12 is already decremented. Add back chunk_size-2.
+ addq 40-2,$r12
+
+;; Here from the word loop; r12 is off by 2; add it back.
+5:
+ addq 2,$r12
+
+;; Here from a failing single byte.
+6:
+
+;; Signal in *errptr that we had a failing access.
+ move.d [$sp],$acr
+ moveq -EFAULT,$r9
+ subq 4,$sp
+ move.d $r9,[$acr]
+
+;; Clear the rest of the destination area using memset. Preserve the
+;; checksum for the readable bytes.
+ move.d $r13,[$sp]
+ subq 4,$sp
+ move.d $r11,$r10
+ move $srp,[$sp]
+ jsr memset
+ clear.d $r11
+
+ move [$sp+],$srp
+ ret
+ move.d [$sp+],$r10
+
+ .previous
+ .section __ex_table,"a"
+ .dword 1b,4b
+ .dword 2b,5b
+ .dword 3b,6b
+ .previous
diff --git a/arch/cris/arch-v32/lib/dram_init.S b/arch/cris/arch-v32/lib/dram_init.S
new file mode 100644
index 00000000000..47b6cf5f4af
--- /dev/null
+++ b/arch/cris/arch-v32/lib/dram_init.S
@@ -0,0 +1,120 @@
+/* $Id: dram_init.S,v 1.4 2005/04/24 18:48:32 starvik Exp $
+ *
+ * DRAM/SDRAM initialization - alter with care
+ * This file is intended to be included from other assembler files
+ *
+ * Note: This file may not modify r8 or r9 because they are used to
+ * carry information from the decompresser to the kernel
+ *
+ * Copyright (C) 2000-2003 Axis Communications AB
+ *
+ * Authors: Mikael Starvik (starvik@axis.com)
+ */
+
+/* Just to be certain the config file is included, we include it here
+ * explicitely instead of depending on it being included in the file that
+ * uses this code.
+ */
+
+#include <linux/config.h>
+#include <asm/arch/hwregs/asm/reg_map_asm.h>
+#include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
+
+ ;; WARNING! The registers r8 and r9 are used as parameters carrying
+ ;; information from the decompressor (if the kernel was compressed).
+ ;; They should not be used in the code below.
+
+ ; Refer to BIF MDS for a description of SDRAM initialization
+
+ ; Bank configuration
+ move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp0), $r0
+ move.d CONFIG_ETRAX_SDRAM_GRP0_CONFIG, $r1
+ move.d $r1, [$r0]
+ move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp1), $r0
+ move.d CONFIG_ETRAX_SDRAM_GRP1_CONFIG, $r1
+ move.d $r1, [$r0]
+
+ ; Calculate value of mrs_data
+ ; CAS latency = 2 && bus_width = 32 => 0x40
+ ; CAS latency = 3 && bus_width = 32 => 0x60
+ ; CAS latency = 2 && bus_width = 16 => 0x20
+ ; CAS latency = 3 && bus_width = 16 => 0x30
+
+ ; Check if value is already supplied in kernel config
+ move.d CONFIG_ETRAX_SDRAM_COMMAND, $r2
+ bne _set_timing
+ nop
+
+ move.d 0x40, $r4 ; Assume 32 bits and CAS latency = 2
+ move.d CONFIG_ETRAX_SDRAM_TIMING, $r1
+ and.d 0x07, $r1 ; Get CAS latency
+ cmpq 2, $r1 ; CL = 2 ?
+ beq _bw_check
+ nop
+ move.d 0x60, $r4
+
+_bw_check:
+ ; Assume that group 0 width is equal to group 1. This assumption
+ ; is wrong for a group 1 only hardware (such as the grand old
+ ; StorPoint+).
+ move.d CONFIG_ETRAX_SDRAM_GRP0_CONFIG, $r1
+ and.d 0x200, $r1 ; DRAM width is bit 9
+ beq _set_timing
+ lslq 2, $r4 ; mrs_data starts at bit 2
+ lsrq 1, $r4 ; 16 bits. Shift down value.
+
+ ; Set timing parameters (refresh off to avoid Guinness TR 83)
+_set_timing:
+ move.d CONFIG_ETRAX_SDRAM_TIMING, $r1
+ and.d ~(3 << reg_bif_core_rw_sdram_timing___ref___lsb), $r1
+ move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing), $r0
+ move.d $r1, [$r0]
+
+ ; Issue NOP command
+ move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_cmd), $r5
+ moveq regk_bif_core_nop, $r1
+ move.d $r1, [$r5]
+
+ ; Wait 200us
+ move.d 10000, $r2
+1: bne 1b
+ subq 1, $r2
+
+ ; Issue initialization command sequence
+ move.d _sdram_commands_start, $r2
+ and.d 0x000fffff, $r2 ; Make sure commands are read from flash
+ move.d _sdram_commands_end, $r3
+ and.d 0x000fffff, $r3
+1: clear.d $r6
+ move.b [$r2+], $r6 ; Load command
+ or.d $r4, $r6 ; Add calculated mrs
+ move.d $r6, [$r5] ; Write rw_sdram_cmd
+ ; Wait 80 ns between each command
+ move.d 4000, $r7
+2: bne 2b
+ subq 1, $r7
+ cmp.d $r2, $r3 ; Last command?
+ bne 1b
+ nop
+
+ ; Start refresh
+ move.d CONFIG_ETRAX_SDRAM_TIMING, $r1
+ move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing), $r0
+ move.d $r1, [$r0]
+
+ ; Initialization finished
+ ba _sdram_commands_end
+ nop
+
+_sdram_commands_start:
+ .byte regk_bif_core_pre ; Precharge
+ .byte regk_bif_core_ref ; refresh
+ .byte regk_bif_core_ref ; refresh
+ .byte regk_bif_core_ref ; refresh
+ .byte regk_bif_core_ref ; refresh
+ .byte regk_bif_core_ref ; refresh
+ .byte regk_bif_core_ref ; refresh
+ .byte regk_bif_core_ref ; refresh
+ .byte regk_bif_core_ref ; refresh
+ .byte regk_bif_core_mrs ; mrs
+_sdram_commands_end:
diff --git a/arch/cris/arch-v32/lib/hw_settings.S b/arch/cris/arch-v32/lib/hw_settings.S
new file mode 100644
index 00000000000..5182e8c2cff
--- /dev/null
+++ b/arch/cris/arch-v32/lib/hw_settings.S
@@ -0,0 +1,73 @@
+/*
+ * $Id: hw_settings.S,v 1.3 2005/04/24 18:36:57 starvik Exp $
+ *
+ * This table is used by some tools to extract hardware parameters.
+ * The table should be included in the kernel and the decompressor.
+ * Don't forget to update the tools if you change this table.
+ *
+ * Copyright (C) 2001 Axis Communications AB
+ *
+ * Authors: Mikael Starvik (starvik@axis.com)
+ */
+
+#include <linux/config.h>
+#include <asm/arch/hwregs/asm/reg_map_asm.h>
+#include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
+#include <asm/arch/hwregs/asm/gio_defs_asm.h>
+
+ .ascii "HW_PARAM_MAGIC" ; Magic number
+ .dword 0xc0004000 ; Kernel start address
+
+ ; Debug port
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+ .dword 0
+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
+ .dword 1
+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
+ .dword 2
+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
+ .dword 3
+#else
+ .dword 4 ; No debug
+#endif
+
+ ; Register values
+ .dword REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg)
+ .dword CONFIG_ETRAX_MEM_GRP1_CONFIG
+ .dword REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg)
+ .dword CONFIG_ETRAX_MEM_GRP2_CONFIG
+ .dword REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg)
+ .dword CONFIG_ETRAX_MEM_GRP3_CONFIG
+ .dword REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg)
+ .dword CONFIG_ETRAX_MEM_GRP4_CONFIG
+ .dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp0)
+ .dword CONFIG_ETRAX_SDRAM_GRP0_CONFIG
+ .dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp1)
+ .dword CONFIG_ETRAX_SDRAM_GRP1_CONFIG
+ .dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing)
+ .dword CONFIG_ETRAX_SDRAM_TIMING
+ .dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cmd)
+ .dword CONFIG_ETRAX_SDRAM_COMMAND
+
+ .dword REG_ADDR(gio, regi_gio, rw_pa_dout)
+ .dword CONFIG_ETRAX_DEF_GIO_PA_OUT
+ .dword REG_ADDR(gio, regi_gio, rw_pa_oe)
+ .dword CONFIG_ETRAX_DEF_GIO_PA_OE
+ .dword REG_ADDR(gio, regi_gio, rw_pb_dout)
+ .dword CONFIG_ETRAX_DEF_GIO_PB_OUT
+ .dword REG_ADDR(gio, regi_gio, rw_pb_oe)
+ .dword CONFIG_ETRAX_DEF_GIO_PB_OE
+ .dword REG_ADDR(gio, regi_gio, rw_pc_dout)
+ .dword CONFIG_ETRAX_DEF_GIO_PC_OUT
+ .dword REG_ADDR(gio, regi_gio, rw_pc_oe)
+ .dword CONFIG_ETRAX_DEF_GIO_PC_OE
+ .dword REG_ADDR(gio, regi_gio, rw_pd_dout)
+ .dword CONFIG_ETRAX_DEF_GIO_PD_OUT
+ .dword REG_ADDR(gio, regi_gio, rw_pd_oe)
+ .dword CONFIG_ETRAX_DEF_GIO_PD_OE
+ .dword REG_ADDR(gio, regi_gio, rw_pe_dout)
+ .dword CONFIG_ETRAX_DEF_GIO_PE_OUT
+ .dword REG_ADDR(gio, regi_gio, rw_pe_oe)
+ .dword CONFIG_ETRAX_DEF_GIO_PE_OE
+
+ .dword 0 ; No more register values
diff --git a/arch/cris/arch-v32/lib/memset.c b/arch/cris/arch-v32/lib/memset.c
new file mode 100644
index 00000000000..ffca1214674
--- /dev/null
+++ b/arch/cris/arch-v32/lib/memset.c
@@ -0,0 +1,253 @@
+/*#************************************************************************#*/
+/*#-------------------------------------------------------------------------*/
+/*# */
+/*# FUNCTION NAME: memset() */
+/*# */
+/*# PARAMETERS: void* dst; Destination address. */
+/*# int c; Value of byte to write. */
+/*# int len; Number of bytes to write. */
+/*# */
+/*# RETURNS: dst. */
+/*# */
+/*# DESCRIPTION: Sets the memory dst of length len bytes to c, as standard. */
+/*# Framework taken from memcpy. This routine is */
+/*# very sensitive to compiler changes in register allocation. */
+/*# Should really be rewritten to avoid this problem. */
+/*# */
+/*#-------------------------------------------------------------------------*/
+/*# */
+/*# HISTORY */
+/*# */
+/*# DATE NAME CHANGES */
+/*# ---- ---- ------- */
+/*# 990713 HP Tired of watching this function (or */
+/*# really, the nonoptimized generic */
+/*# implementation) take up 90% of simulator */
+/*# output. Measurements needed. */
+/*# */
+/*#-------------------------------------------------------------------------*/
+
+#include <linux/types.h>
+
+/* No, there's no macro saying 12*4, since it is "hard" to get it into
+ the asm in a good way. Thus better to expose the problem everywhere.
+ */
+
+/* Assuming 1 cycle per dword written or read (ok, not really true), and
+ one per instruction, then 43+3*(n/48-1) <= 24+24*(n/48-1)
+ so n >= 45.7; n >= 0.9; we win on the first full 48-byte block to set. */
+
+#define ZERO_BLOCK_SIZE (1*12*4)
+
+void *memset(void *pdst,
+ int c,
+ size_t plen)
+{
+ /* Ok. Now we want the parameters put in special registers.
+ Make sure the compiler is able to make something useful of this. */
+
+ register char *return_dst __asm__ ("r10") = pdst;
+ register int n __asm__ ("r12") = plen;
+ register int lc __asm__ ("r11") = c;
+
+ /* Most apps use memset sanely. Only those memsetting about 3..4
+ bytes or less get penalized compared to the generic implementation
+ - and that's not really sane use. */
+
+ /* Ugh. This is fragile at best. Check with newer GCC releases, if
+ they compile cascaded "x |= x << 8" sanely! */
+ __asm__("movu.b %0,$r13 \n\
+ lslq 8,$r13 \n\
+ move.b %0,$r13 \n\
+ move.d $r13,%0 \n\
+ lslq 16,$r13 \n\
+ or.d $r13,%0"
+ : "=r" (lc) : "0" (lc) : "r13");
+
+ {
+ register char *dst __asm__ ("r13") = pdst;
+
+ /* This is NONPORTABLE, but since this whole routine is */
+ /* grossly nonportable that doesn't matter. */
+
+ if (((unsigned long) pdst & 3) != 0
+ /* Oops! n=0 must be a legal call, regardless of alignment. */
+ && n >= 3)
+ {
+ if ((unsigned long)dst & 1)
+ {
+ *dst = (char) lc;
+ n--;
+ dst++;
+ }
+
+ if ((unsigned long)dst & 2)
+ {
+ *(short *)dst = lc;
+ n -= 2;
+ dst += 2;
+ }
+ }
+
+ /* Now the fun part. For the threshold value of this, check the equation
+ above. */
+ /* Decide which copying method to use. */
+ if (n >= ZERO_BLOCK_SIZE)
+ {
+ /* For large copies we use 'movem' */
+
+ /* It is not optimal to tell the compiler about clobbering any
+ registers; that will move the saving/restoring of those registers
+ to the function prologue/epilogue, and make non-movem sizes
+ suboptimal.
+
+ This method is not foolproof; it assumes that the "asm reg"
+ declarations at the beginning of the function really are used
+ here (beware: they may be moved to temporary registers).
+ This way, we do not have to save/move the registers around into
+ temporaries; we can safely use them straight away.
+
+ If you want to check that the allocation was right; then
+ check the equalities in the first comment. It should say
+ "r13=r13, r12=r12, r11=r11" */
+ __asm__ volatile (" \n\
+ ;; Check that the register asm declaration got right. \n\
+ ;; The GCC manual says it will work, but there *has* been bugs. \n\
+ .ifnc %0-%1-%4,$r13-$r12-$r11 \n\
+ .err \n\
+ .endif \n\
+ \n\
+ ;; Save the registers we'll clobber in the movem process \n\
+ ;; on the stack. Don't mention them to gcc, it will only be \n\
+ ;; upset. \n\
+ subq 11*4,$sp \n\
+ movem $r10,[$sp] \n\
+ \n\
+ move.d $r11,$r0 \n\
+ move.d $r11,$r1 \n\
+ move.d $r11,$r2 \n\
+ move.d $r11,$r3 \n\
+ move.d $r11,$r4 \n\
+ move.d $r11,$r5 \n\
+ move.d $r11,$r6 \n\
+ move.d $r11,$r7 \n\
+ move.d $r11,$r8 \n\
+ move.d $r11,$r9 \n\
+ move.d $r11,$r10 \n\
+ \n\
+ ;; Now we've got this: \n\
+ ;; r13 - dst \n\
+ ;; r12 - n \n\
+ \n\
+ ;; Update n for the first loop \n\
+ subq 12*4,$r12 \n\
+0: \n\
+ subq 12*4,$r12 \n\
+ bge 0b \n\
+ movem $r11,[$r13+] \n\
+ \n\
+ addq 12*4,$r12 ;; compensate for last loop underflowing n \n\
+ \n\
+ ;; Restore registers from stack \n\
+ movem [$sp+],$r10"
+
+ /* Outputs */ : "=r" (dst), "=r" (n)
+ /* Inputs */ : "0" (dst), "1" (n), "r" (lc));
+ }
+
+ /* Either we directly starts copying, using dword copying
+ in a loop, or we copy as much as possible with 'movem'
+ and then the last block (<44 bytes) is copied here.
+ This will work since 'movem' will have updated src,dst,n. */
+
+ while ( n >= 16 )
+ {
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ n -= 16;
+ }
+
+ /* A switch() is definitely the fastest although it takes a LOT of code.
+ * Particularly if you inline code this.
+ */
+ switch (n)
+ {
+ case 0:
+ break;
+ case 1:
+ *(char*)dst = (char) lc;
+ break;
+ case 2:
+ *(short*)dst = (short) lc;
+ break;
+ case 3:
+ *((short*)dst)++ = (short) lc;
+ *(char*)dst = (char) lc;
+ break;
+ case 4:
+ *((long*)dst)++ = lc;
+ break;
+ case 5:
+ *((long*)dst)++ = lc;
+ *(char*)dst = (char) lc;
+ break;
+ case 6:
+ *((long*)dst)++ = lc;
+ *(short*)dst = (short) lc;
+ break;
+ case 7:
+ *((long*)dst)++ = lc;
+ *((short*)dst)++ = (short) lc;
+ *(char*)dst = (char) lc;
+ break;
+ case 8:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ break;
+ case 9:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *(char*)dst = (char) lc;
+ break;
+ case 10:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *(short*)dst = (short) lc;
+ break;
+ case 11:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((short*)dst)++ = (short) lc;
+ *(char*)dst = (char) lc;
+ break;
+ case 12:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ break;
+ case 13:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *(char*)dst = (char) lc;
+ break;
+ case 14:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *(short*)dst = (short) lc;
+ break;
+ case 15:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((short*)dst)++ = (short) lc;
+ *(char*)dst = (char) lc;
+ break;
+ }
+ }
+
+ return return_dst; /* destination pointer. */
+} /* memset() */
diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S
new file mode 100644
index 00000000000..aba5c751c28
--- /dev/null
+++ b/arch/cris/arch-v32/lib/nand_init.S
@@ -0,0 +1,179 @@
+##=============================================================================
+##
+## nand_init.S
+##
+## The bootrom copies data from the NAND flash to the internal RAM but
+## due to a bug/feature we can only trust the 256 first bytes. So this
+## code copies more data from NAND flash to internal RAM. Obvioulsy this
+## code must fit in the first 256 bytes so alter with care.
+##
+## Some notes about the bug/feature for future reference:
+## The bootrom copies the first 127 KB from NAND flash to internal
+## memory. The problem is that it does a bytewise copy. NAND flashes
+## does autoincrement on the address so for a 16-bite device each
+## read/write increases the address by two. So the copy loop in the
+## bootrom will discard every second byte. This is solved by inserting
+## zeroes in every second byte in the first erase block.
+##
+## The bootrom also incorrectly assumes that it can read the flash
+## linear with only one read command but the flash will actually
+## switch between normal area and spare area if you do that so we
+## can't trust more than the first 256 bytes.
+##
+##=============================================================================
+
+#include <asm/arch/hwregs/asm/reg_map_asm.h>
+#include <asm/arch/hwregs/asm/gio_defs_asm.h>
+#include <asm/arch/hwregs/asm/pinmux_defs_asm.h>
+#include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
+#include <asm/arch/hwregs/asm/config_defs_asm.h>
+#include <linux/config.h>
+
+;; There are 8-bit NAND flashes and 16-bit NAND flashes.
+;; We need to treat them slightly different.
+#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
+#define PAGE_SIZE 256
+#else
+#error 2
+#define PAGE_SIZE 512
+#endif
+#define ERASE_BLOCK 16384
+
+;; GPIO pins connected to NAND flash
+#define CE 4
+#define CLE 5
+#define ALE 6
+#define BY 7
+
+;; Address space for NAND flash
+#define NAND_RD_ADDR 0x90000000
+#define NAND_WR_ADDR 0x94000000
+
+#define READ_CMD 0x00
+
+;; Readability macros
+#define CSP_MASK \
+ REG_MASK(bif_core, rw_grp3_cfg, gated_csp0) | \
+ REG_MASK(bif_core, rw_grp3_cfg, gated_csp1)
+#define CSP_VAL \
+ REG_STATE(bif_core, rw_grp3_cfg, gated_csp0, rd) | \
+ REG_STATE(bif_core, rw_grp3_cfg, gated_csp1, wr)
+
+;;----------------------------------------------------------------------------
+;; Macros to set/clear GPIO bits
+
+.macro SET x
+ or.b (1<<\x),$r9
+ move.d $r9, [$r2]
+.endm
+
+.macro CLR x
+ and.b ~(1<<\x),$r9
+ move.d $r9, [$r2]
+.endm
+
+;;----------------------------------------------------------------------------
+
+nand_boot:
+ ;; Check if nand boot was selected
+ move.d REG_ADDR(config, regi_config, r_bootsel), $r0
+ move.d [$r0], $r0
+ and.d REG_MASK(config, r_bootsel, boot_mode), $r0
+ cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0
+ bne normal_boot ; No NAND boot
+ nop
+
+copy_nand_to_ram:
+ ;; copy_nand_to_ram
+ ;; Arguments
+ ;; r10 - destination
+ ;; r11 - source offset
+ ;; r12 - size
+ ;; r13 - Address to jump to after completion
+ ;; Note : r10-r12 are clobbered on return
+ ;; Registers used:
+ ;; r0 - NAND_RD_ADDR
+ ;; r1 - NAND_WR_ADDR
+ ;; r2 - reg_gio_rw_pa_dout
+ ;; r3 - reg_gio_r_pa_din
+ ;; r4 - tmp
+ ;; r5 - byte counter within a page
+ ;; r6 - reg_pinmux_rw_pa
+ ;; r7 - reg_gio_rw_pa_oe
+ ;; r8 - reg_bif_core_rw_grp3_cfg
+ ;; r9 - reg_gio_rw_pa_dout shadow
+ move.d 0x90000000, $r0
+ move.d 0x94000000, $r1
+ move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r2
+ move.d REG_ADDR(gio, regi_gio, r_pa_din), $r3
+ move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r6
+ move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r7
+ move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r8
+
+#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
+ lsrq 1, $r11
+#endif
+ ;; Set up GPIO
+ move.d [$r2], $r9
+ move.d [$r7], $r4
+ or.b (1<<ALE) | (1 << CLE) | (1<<CE), $r4
+ move.d $r4, [$r7]
+
+ ;; Set up bif
+ move.d [$r8], $r4
+ and.d CSP_MASK, $r4
+ or.d CSP_VAL, $r4
+ move.d $r4, [$r8]
+
+1: ;; Copy one page
+ CLR CE
+ SET CLE
+ moveq READ_CMD, $r4
+ move.b $r4, [$r1]
+ moveq 20, $r4
+2: bne 2b
+ subq 1, $r4
+ CLR CLE
+ SET ALE
+ clear.w [$r1] ; Column address = 0
+ move.d $r11, $r4
+ lsrq 8, $r4
+ move.b $r4, [$r1] ; Row address
+ lsrq 8, $r4
+ move.b $r4, [$r1] ; Row adddress
+ moveq 20, $r4
+2: bne 2b
+ subq 1, $r4
+ CLR ALE
+2: move.d [$r3], $r4
+ and.d 1 << BY, $r4
+ beq 2b
+ movu.w PAGE_SIZE, $r5
+2: ; Copy one byte/word
+#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
+ move.w [$r0], $r4
+#else
+ move.b [$r0], $r4
+#endif
+ subq 1, $r5
+ bne 2b
+#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
+ move.w $r4, [$r10+]
+ subu.w PAGE_SIZE*2, $r12
+#else
+ move.b $r4, [$r10+]
+ subu.w PAGE_SIZE, $r12
+#endif
+ bpl 1b
+ addu.w PAGE_SIZE, $r11
+
+ ;; End of copy
+ jump $r13
+ nop
+
+ ;; This will warn if the code above is too large. If you consider
+ ;; to remove this you don't understand the bug/feature.
+ .org 256
+ .org ERASE_BLOCK
+
+normal_boot:
diff --git a/arch/cris/arch-v32/lib/spinlock.S b/arch/cris/arch-v32/lib/spinlock.S
new file mode 100644
index 00000000000..2437ae7f6ed
--- /dev/null
+++ b/arch/cris/arch-v32/lib/spinlock.S
@@ -0,0 +1,33 @@
+;; Core of the spinlock implementation
+;;
+;; Copyright (C) 2004 Axis Communications AB.
+;;
+;; Author: Mikael Starvik
+
+
+ .global cris_spin_lock
+ .global cris_spin_trylock
+
+ .text
+
+cris_spin_lock:
+ clearf p
+1: test.d [$r10]
+ beq 1b
+ clearf p
+ ax
+ clear.d [$r10]
+ bcs 1b
+ clearf p
+ ret
+ nop
+
+cris_spin_trylock:
+ clearf p
+1: move.d [$r10], $r11
+ ax
+ clear.d [$r10]
+ bcs 1b
+ clearf p
+ ret
+ move.d $r11,$r10
diff --git a/arch/cris/arch-v32/lib/string.c b/arch/cris/arch-v32/lib/string.c
new file mode 100644
index 00000000000..98e282ac824
--- /dev/null
+++ b/arch/cris/arch-v32/lib/string.c
@@ -0,0 +1,219 @@
+/*#************************************************************************#*/
+/*#-------------------------------------------------------------------------*/
+/*# */
+/*# FUNCTION NAME: memcpy() */
+/*# */
+/*# PARAMETERS: void* dst; Destination address. */
+/*# void* src; Source address. */
+/*# int len; Number of bytes to copy. */
+/*# */
+/*# RETURNS: dst. */
+/*# */
+/*# DESCRIPTION: Copies len bytes of memory from src to dst. No guarantees */
+/*# about copying of overlapping memory areas. This routine is */
+/*# very sensitive to compiler changes in register allocation. */
+/*# Should really be rewritten to avoid this problem. */
+/*# */
+/*#-------------------------------------------------------------------------*/
+/*# */
+/*# HISTORY */
+/*# */
+/*# DATE NAME CHANGES */
+/*# ---- ---- ------- */
+/*# 941007 Kenny R Creation */
+/*# 941011 Kenny R Lots of optimizations and inlining. */
+/*# 941129 Ulf A Adapted for use in libc. */
+/*# 950216 HP N==0 forgotten if non-aligned src/dst. */
+/*# Added some optimizations. */
+/*# 001025 HP Make src and dst char *. Align dst to */
+/*# dword, not just word-if-both-src-and-dst- */
+/*# are-misaligned. */
+/*# */
+/*#-------------------------------------------------------------------------*/
+
+#include <linux/types.h>
+
+void *memcpy(void *pdst,
+ const void *psrc,
+ size_t pn)
+{
+ /* Ok. Now we want the parameters put in special registers.
+ Make sure the compiler is able to make something useful of this.
+ As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+ If gcc was allright, it really would need no temporaries, and no
+ stack space to save stuff on. */
+
+ register void *return_dst __asm__ ("r10") = pdst;
+ register char *dst __asm__ ("r13") = pdst;
+ register const char *src __asm__ ("r11") = psrc;
+ register int n __asm__ ("r12") = pn;
+
+
+ /* When src is aligned but not dst, this makes a few extra needless
+ cycles. I believe it would take as many to check that the
+ re-alignment was unnecessary. */
+ if (((unsigned long) dst & 3) != 0
+ /* Don't align if we wouldn't copy more than a few bytes; so we
+ don't have to check further for overflows. */
+ && n >= 3)
+ {
+ if ((unsigned long) dst & 1)
+ {
+ n--;
+ *(char*)dst = *(char*)src;
+ src++;
+ dst++;
+ }
+
+ if ((unsigned long) dst & 2)
+ {
+ n -= 2;
+ *(short*)dst = *(short*)src;
+ src += 2;
+ dst += 2;
+ }
+ }
+
+ /* Decide which copying method to use. Movem is dirt cheap, so the
+ overheap is low enough to always use the minimum block size as the
+ threshold. */
+ if (n >= 44)
+ {
+ /* For large copies we use 'movem' */
+
+ /* It is not optimal to tell the compiler about clobbering any
+ registers; that will move the saving/restoring of those registers
+ to the function prologue/epilogue, and make non-movem sizes
+ suboptimal. */
+ __asm__ volatile (" \n\
+ ;; Check that the register asm declaration got right. \n\
+ ;; The GCC manual explicitly says TRT will happen. \n\
+ .ifnc %0-%1-%2,$r13-$r11-$r12 \n\
+ .err \n\
+ .endif \n\
+ \n\
+ ;; Save the registers we'll use in the movem process \n\
+ \n\
+ ;; on the stack. \n\
+ subq 11*4,$sp \n\
+ movem $r10,[$sp] \n\
+ \n\
+ ;; Now we've got this: \n\
+ ;; r11 - src \n\
+ ;; r13 - dst \n\
+ ;; r12 - n \n\
+ \n\
+ ;; Update n for the first loop \n\
+ subq 44,$r12 \n\
+0: \n\
+ movem [$r11+],$r10 \n\
+ subq 44,$r12 \n\
+ bge 0b \n\
+ movem $r10,[$r13+] \n\
+ \n\
+ addq 44,$r12 ;; compensate for last loop underflowing n \n\
+ \n\
+ ;; Restore registers from stack \n\
+ movem [$sp+],$r10"
+
+ /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n)
+ /* Inputs */ : "0" (dst), "1" (src), "2" (n));
+
+ }
+
+ /* Either we directly starts copying, using dword copying
+ in a loop, or we copy as much as possible with 'movem'
+ and then the last block (<44 bytes) is copied here.
+ This will work since 'movem' will have updated src,dst,n. */
+
+ while ( n >= 16 )
+ {
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ n -= 16;
+ }
+
+ /* A switch() is definitely the fastest although it takes a LOT of code.
+ * Particularly if you inline code this.
+ */
+ switch (n)
+ {
+ case 0:
+ break;
+ case 1:
+ *(char*)dst = *(char*)src;
+ break;
+ case 2:
+ *(short*)dst = *(short*)src;
+ break;
+ case 3:
+ *((short*)dst)++ = *((short*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ case 4:
+ *((long*)dst)++ = *((long*)src)++;
+ break;
+ case 5:
+ *((long*)dst)++ = *((long*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ case 6:
+ *((long*)dst)++ = *((long*)src)++;
+ *(short*)dst = *(short*)src;
+ break;
+ case 7:
+ *((long*)dst)++ = *((long*)src)++;
+ *((short*)dst)++ = *((short*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ case 8:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ break;
+ case 9:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ case 10:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *(short*)dst = *(short*)src;
+ break;
+ case 11:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((short*)dst)++ = *((short*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ case 12:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ break;
+ case 13:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ case 14:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *(short*)dst = *(short*)src;
+ break;
+ case 15:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((short*)dst)++ = *((short*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ }
+
+ return return_dst; /* destination pointer. */
+} /* memcpy() */
diff --git a/arch/cris/arch-v32/lib/usercopy.c b/arch/cris/arch-v32/lib/usercopy.c
new file mode 100644
index 00000000000..f0b08460c1b
--- /dev/null
+++ b/arch/cris/arch-v32/lib/usercopy.c
@@ -0,0 +1,470 @@
+/*
+ * User address space access functions.
+ * The non-inlined parts of asm-cris/uaccess.h are here.
+ *
+ * Copyright (C) 2000, 2003 Axis Communications AB.
+ *
+ * Written by Hans-Peter Nilsson.
+ * Pieces used from memcpy, originally by Kenny Ranerup long time ago.
+ */
+
+#include <asm/uaccess.h>
+
+/* Asm:s have been tweaked (within the domain of correctness) to give
+ satisfactory results for "gcc version 3.2.1 Axis release R53/1.53-v32".
+
+ Check regularly...
+
+ Note that for CRISv32, the PC saved at a bus-fault is the address
+ *at* the faulting instruction, with a special case for instructions
+ in delay slots: then it's the address of the branch. Note also that
+ in contrast to v10, a postincrement in the instruction is *not*
+ performed at a bus-fault; the register is seen having the original
+ value in fault handlers. */
+
+
+/* Copy to userspace. This is based on the memcpy used for
+ kernel-to-kernel copying; see "string.c". */
+
+unsigned long
+__copy_user (void __user *pdst, const void *psrc, unsigned long pn)
+{
+ /* We want the parameters put in special registers.
+ Make sure the compiler is able to make something useful of this.
+ As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+ FIXME: Comment for old gcc version. Check.
+ If gcc was allright, it really would need no temporaries, and no
+ stack space to save stuff on. */
+
+ register char *dst __asm__ ("r13") = pdst;
+ register const char *src __asm__ ("r11") = psrc;
+ register int n __asm__ ("r12") = pn;
+ register int retn __asm__ ("r10") = 0;
+
+
+ /* When src is aligned but not dst, this makes a few extra needless
+ cycles. I believe it would take as many to check that the
+ re-alignment was unnecessary. */
+ if (((unsigned long) dst & 3) != 0
+ /* Don't align if we wouldn't copy more than a few bytes; so we
+ don't have to check further for overflows. */
+ && n >= 3)
+ {
+ if ((unsigned long) dst & 1)
+ {
+ __asm_copy_to_user_1 (dst, src, retn);
+ n--;
+ }
+
+ if ((unsigned long) dst & 2)
+ {
+ __asm_copy_to_user_2 (dst, src, retn);
+ n -= 2;
+ }
+ }
+
+ /* Movem is dirt cheap. The overheap is low enough to always use the
+ minimum possible block size as the threshold. */
+ if (n >= 44)
+ {
+ /* For large copies we use 'movem'. */
+
+ /* It is not optimal to tell the compiler about clobbering any
+ registers; that will move the saving/restoring of those registers
+ to the function prologue/epilogue, and make non-movem sizes
+ suboptimal. */
+ __asm__ volatile ("\
+ ;; Check that the register asm declaration got right. \n\
+ ;; The GCC manual explicitly says TRT will happen. \n\
+ .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\
+ .err \n\
+ .endif \n\
+ \n\
+ ;; Save the registers we'll use in the movem process \n\
+ ;; on the stack. \n\
+ subq 11*4,$sp \n\
+ movem $r10,[$sp] \n\
+ \n\
+ ;; Now we've got this: \n\
+ ;; r11 - src \n\
+ ;; r13 - dst \n\
+ ;; r12 - n \n\
+ \n\
+ ;; Update n for the first loop \n\
+ subq 44,$r12 \n\
+0: \n\
+ movem [$r11+],$r10 \n\
+ subq 44,$r12 \n\
+1: bge 0b \n\
+ movem $r10,[$r13+] \n\
+3: \n\
+ addq 44,$r12 ;; compensate for last loop underflowing n \n\
+ \n\
+ ;; Restore registers from stack \n\
+ movem [$sp+],$r10 \n\
+2: \n\
+ .section .fixup,\"ax\" \n\
+4: \n\
+; When failing on any of the 1..44 bytes in a chunk, we adjust back the \n\
+; source pointer and just drop through to the by-16 and by-4 loops to \n\
+; get the correct number of failing bytes. This necessarily means a \n\
+; few extra exceptions, but invalid user pointers shouldn't happen in \n\
+; time-critical code anyway. \n\
+ jump 3b \n\
+ subq 44,$r11 \n\
+ \n\
+ .previous \n\
+ .section __ex_table,\"a\" \n\
+ .dword 1b,4b \n\
+ .previous"
+
+ /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
+ /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn));
+
+ }
+
+ while (n >= 16)
+ {
+ __asm_copy_to_user_16 (dst, src, retn);
+ n -= 16;
+ }
+
+ /* Having a separate by-four loops cuts down on cache footprint.
+ FIXME: Test with and without; increasing switch to be 0..15. */
+ while (n >= 4)
+ {
+ __asm_copy_to_user_4 (dst, src, retn);
+ n -= 4;
+ }
+
+ switch (n)
+ {
+ case 0:
+ break;
+ case 1:
+ __asm_copy_to_user_1 (dst, src, retn);
+ break;
+ case 2:
+ __asm_copy_to_user_2 (dst, src, retn);
+ break;
+ case 3:
+ __asm_copy_to_user_3 (dst, src, retn);
+ break;
+ }
+
+ return retn;
+}
+
+/* Copy from user to kernel, zeroing the bytes that were inaccessible in
+ userland. The return-value is the number of bytes that were
+ inaccessible. */
+
+unsigned long
+__copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
+{
+ /* We want the parameters put in special registers.
+ Make sure the compiler is able to make something useful of this.
+ As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+ FIXME: Comment for old gcc version. Check.
+ If gcc was allright, it really would need no temporaries, and no
+ stack space to save stuff on. */
+
+ register char *dst __asm__ ("r13") = pdst;
+ register const char *src __asm__ ("r11") = psrc;
+ register int n __asm__ ("r12") = pn;
+ register int retn __asm__ ("r10") = 0;
+
+ /* The best reason to align src is that we then know that a read-fault
+ was for aligned bytes; there's no 1..3 remaining good bytes to
+ pickle. */
+ if (((unsigned long) src & 3) != 0)
+ {
+ if (((unsigned long) src & 1) && n != 0)
+ {
+ __asm_copy_from_user_1 (dst, src, retn);
+ n--;
+ }
+
+ if (((unsigned long) src & 2) && n >= 2)
+ {
+ __asm_copy_from_user_2 (dst, src, retn);
+ n -= 2;
+ }
+
+ /* We only need one check after the unalignment-adjustments, because
+ if both adjustments were done, either both or neither reference
+ had an exception. */
+ if (retn != 0)
+ goto copy_exception_bytes;
+ }
+
+ /* Movem is dirt cheap. The overheap is low enough to always use the
+ minimum possible block size as the threshold. */
+ if (n >= 44)
+ {
+ /* It is not optimal to tell the compiler about clobbering any
+ registers; that will move the saving/restoring of those registers
+ to the function prologue/epilogue, and make non-movem sizes
+ suboptimal. */
+ __asm__ volatile ("\
+ .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\
+ .err \n\
+ .endif \n\
+ \n\
+ ;; Save the registers we'll use in the movem process \n\
+ ;; on the stack. \n\
+ subq 11*4,$sp \n\
+ movem $r10,[$sp] \n\
+ \n\
+ ;; Now we've got this: \n\
+ ;; r11 - src \n\
+ ;; r13 - dst \n\
+ ;; r12 - n \n\
+ \n\
+ ;; Update n for the first loop \n\
+ subq 44,$r12 \n\
+0: \n\
+ movem [$r11+],$r10 \n\
+ \n\
+ subq 44,$r12 \n\
+ bge 0b \n\
+ movem $r10,[$r13+] \n\
+ \n\
+4: \n\
+ addq 44,$r12 ;; compensate for last loop underflowing n \n\
+ \n\
+ ;; Restore registers from stack \n\
+ movem [$sp+],$r10 \n\
+ .section .fixup,\"ax\" \n\
+ \n\
+;; Do not jump back into the loop if we fail. For some uses, we get a \n\
+;; page fault somewhere on the line. Without checking for page limits, \n\
+;; we don't know where, but we need to copy accurately and keep an \n\
+;; accurate count; not just clear the whole line. To do that, we fall \n\
+;; down in the code below, proceeding with smaller amounts. It should \n\
+;; be kept in mind that we have to cater to code like what at one time \n\
+;; was in fs/super.c: \n\
+;; i = size - copy_from_user((void *)page, data, size); \n\
+;; which would cause repeated faults while clearing the remainder of \n\
+;; the SIZE bytes at PAGE after the first fault. \n\
+;; A caveat here is that we must not fall through from a failing page \n\
+;; to a valid page. \n\
+ \n\
+3: \n\
+ jump 4b ;; Fall through, pretending the fault didn't happen. \n\
+ nop \n\
+ \n\
+ .previous \n\
+ .section __ex_table,\"a\" \n\
+ .dword 0b,3b \n\
+ .previous"
+
+ /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
+ /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn));
+ }
+
+ /* Either we directly start copying here, using dword copying in a loop,
+ or we copy as much as possible with 'movem' and then the last block
+ (<44 bytes) is copied here. This will work since 'movem' will have
+ updated src, dst and n. (Except with failing src.)
+
+ Since we want to keep src accurate, we can't use
+ __asm_copy_from_user_N with N != (1, 2, 4); it updates dst and
+ retn, but not src (by design; it's value is ignored elsewhere). */
+
+ while (n >= 4)
+ {
+ __asm_copy_from_user_4 (dst, src, retn);
+ n -= 4;
+
+ if (retn)
+ goto copy_exception_bytes;
+ }
+
+ /* If we get here, there were no memory read faults. */
+ switch (n)
+ {
+ /* These copies are at least "naturally aligned" (so we don't have
+ to check each byte), due to the src alignment code before the
+ movem loop. The *_3 case *will* get the correct count for retn. */
+ case 0:
+ /* This case deliberately left in (if you have doubts check the
+ generated assembly code). */
+ break;
+ case 1:
+ __asm_copy_from_user_1 (dst, src, retn);
+ break;
+ case 2:
+ __asm_copy_from_user_2 (dst, src, retn);
+ break;
+ case 3:
+ __asm_copy_from_user_3 (dst, src, retn);
+ break;
+ }
+
+ /* If we get here, retn correctly reflects the number of failing
+ bytes. */
+ return retn;
+
+copy_exception_bytes:
+ /* We already have "retn" bytes cleared, and need to clear the
+ remaining "n" bytes. A non-optimized simple byte-for-byte in-line
+ memset is preferred here, since this isn't speed-critical code and
+ we'd rather have this a leaf-function than calling memset. */
+ {
+ char *endp;
+ for (endp = dst + n; dst < endp; dst++)
+ *dst = 0;
+ }
+
+ return retn + n;
+}
+
+/* Zero userspace. */
+
+unsigned long
+__do_clear_user (void __user *pto, unsigned long pn)
+{
+ /* We want the parameters put in special registers.
+ Make sure the compiler is able to make something useful of this.
+ As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+ FIXME: Comment for old gcc version. Check.
+ If gcc was allright, it really would need no temporaries, and no
+ stack space to save stuff on. */
+
+ register char *dst __asm__ ("r13") = pto;
+ register int n __asm__ ("r12") = pn;
+ register int retn __asm__ ("r10") = 0;
+
+
+ if (((unsigned long) dst & 3) != 0
+ /* Don't align if we wouldn't copy more than a few bytes. */
+ && n >= 3)
+ {
+ if ((unsigned long) dst & 1)
+ {
+ __asm_clear_1 (dst, retn);
+ n--;
+ }
+
+ if ((unsigned long) dst & 2)
+ {
+ __asm_clear_2 (dst, retn);
+ n -= 2;
+ }
+ }
+
+ /* Decide which copying method to use.
+ FIXME: This number is from the "ordinary" kernel memset. */
+ if (n >= 48)
+ {
+ /* For large clears we use 'movem' */
+
+ /* It is not optimal to tell the compiler about clobbering any
+ call-saved registers; that will move the saving/restoring of
+ those registers to the function prologue/epilogue, and make
+ non-movem sizes suboptimal.
+
+ This method is not foolproof; it assumes that the "asm reg"
+ declarations at the beginning of the function really are used
+ here (beware: they may be moved to temporary registers).
+ This way, we do not have to save/move the registers around into
+ temporaries; we can safely use them straight away.
+
+ If you want to check that the allocation was right; then
+ check the equalities in the first comment. It should say
+ something like "r13=r13, r11=r11, r12=r12". */
+ __asm__ volatile ("\
+ .ifnc %0%1%2,$r13$r12$r10 \n\
+ .err \n\
+ .endif \n\
+ \n\
+ ;; Save the registers we'll clobber in the movem process \n\
+ ;; on the stack. Don't mention them to gcc, it will only be \n\
+ ;; upset. \n\
+ subq 11*4,$sp \n\
+ movem $r10,[$sp] \n\
+ \n\
+ clear.d $r0 \n\
+ clear.d $r1 \n\
+ clear.d $r2 \n\
+ clear.d $r3 \n\
+ clear.d $r4 \n\
+ clear.d $r5 \n\
+ clear.d $r6 \n\
+ clear.d $r7 \n\
+ clear.d $r8 \n\
+ clear.d $r9 \n\
+ clear.d $r10 \n\
+ clear.d $r11 \n\
+ \n\
+ ;; Now we've got this: \n\
+ ;; r13 - dst \n\
+ ;; r12 - n \n\
+ \n\
+ ;; Update n for the first loop \n\
+ subq 12*4,$r12 \n\
+0: \n\
+ subq 12*4,$r12 \n\
+1: \n\
+ bge 0b \n\
+ movem $r11,[$r13+] \n\
+ \n\
+ addq 12*4,$r12 ;; compensate for last loop underflowing n \n\
+ \n\
+ ;; Restore registers from stack \n\
+ movem [$sp+],$r10 \n\
+2: \n\
+ .section .fixup,\"ax\" \n\
+3: \n\
+ movem [$sp],$r10 \n\
+ addq 12*4,$r10 \n\
+ addq 12*4,$r13 \n\
+ movem $r10,[$sp] \n\
+ jump 0b \n\
+ clear.d $r10 \n\
+ \n\
+ .previous \n\
+ .section __ex_table,\"a\" \n\
+ .dword 1b,3b \n\
+ .previous"
+
+ /* Outputs */ : "=r" (dst), "=r" (n), "=r" (retn)
+ /* Inputs */ : "0" (dst), "1" (n), "2" (retn)
+ /* Clobber */ : "r11");
+ }
+
+ while (n >= 16)
+ {
+ __asm_clear_16 (dst, retn);
+ n -= 16;
+ }
+
+ /* Having a separate by-four loops cuts down on cache footprint.
+ FIXME: Test with and without; increasing switch to be 0..15. */
+ while (n >= 4)
+ {
+ __asm_clear_4 (dst, retn);
+ n -= 4;
+ }
+
+ switch (n)
+ {
+ case 0:
+ break;
+ case 1:
+ __asm_clear_1 (dst, retn);
+ break;
+ case 2:
+ __asm_clear_2 (dst, retn);
+ break;
+ case 3:
+ __asm_clear_3 (dst, retn);
+ break;
+ }
+
+ return retn;
+}