Merge branch 'master' into for-next

Sync with Linus tree to have 157550ff ("mtd: add GPMI-NAND driver
in the config and Makefile") as I have patch depending on that one.

6 files changed, 14 insertions, 12 deletions

diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 0d722177992..32d90867a98 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -4,6 +4,7 @@ config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V10
 	select NET_ETHERNET
+	select NET_CORE
 	select MII
 	help
 	  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index b9f9c8ce216..b579dd02e09 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -694,7 +694,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
                 for (i = 0; i < count; i++) {
                         ch = *mem++;
-			buf = pack_hex_byte(buf, ch);
+			buf = hex_byte_pack(buf, ch);
                 }
         }
         
@@ -868,7 +868,7 @@ stub_is_stopped(int sigval)
 	/* Send trap type (converted to signal) */
 
 	*ptr++ = 'T';
-	ptr = pack_hex_byte(ptr, sigval);
+	ptr = hex_byte_pack(ptr, sigval);
 
 	/* Send register contents. We probably only need to send the
 	 * PC, frame pointer and stack pointer here. Other registers will be
@@ -881,7 +881,7 @@ stub_is_stopped(int sigval)
                 status = read_register (regno, &reg_cont);
                 
 		if (status == SUCCESS) {
-			ptr = pack_hex_byte(ptr, regno);
+			ptr = hex_byte_pack(ptr, regno);
                         *ptr++ = ':';
 
                         ptr = mem2hex(ptr, (unsigned char *)&reg_cont,
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 41a2732e8b9..e47e9c3401b 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -4,6 +4,7 @@ config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V32
 	select NET_ETHERNET
+	select NET_CORE
 	select MII
 	help
 	  This option enables the ETRAX FS built-in 10/100Mbit Ethernet
diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
index f58f2c1c529..7fb52128ddc 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
@@ -163,7 +163,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
 	this->ecc.mode = NAND_ECC_SOFT;
 
 	/* Enable the following for a flash based bad block table */
-	/* this->options = NAND_USE_FLASH_BBT; */
+	/* this->bbt_options = NAND_BBT_USE_FLASH; */
 
 	/* Scan to find existence of the device */
 	if (nand_scan(crisv32_mtd, 1)) {
diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
index d5b0cc9f976..e03238454b0 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
@@ -154,7 +154,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
 	this->ecc.mode = NAND_ECC_SOFT;
 
 	/* Enable the following for a flash based bad block table */
-	/* this->options = NAND_USE_FLASH_BBT; */
+	/* this->bbt_options = NAND_BBT_USE_FLASH; */
 
 	/* Scan to find existence of the device */
 	if (nand_scan(crisv32_mtd, 1)) {
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index c0343c3ea7f..8c1d35cdf00 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -677,7 +677,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
 		for (i = 0; i < count; i++) {
 			ch = *mem++;
-			buf = pack_hex_byte(buf, ch);
+			buf = hex_byte_pack(buf, ch);
 		}
         }
         /* Terminate properly. */
@@ -695,7 +695,7 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count)
 	mem += count - 1;
 	for (i = 0; i < count; i++) {
 		ch = *mem--;
-		buf = pack_hex_byte(buf, ch);
+		buf = hex_byte_pack(buf, ch);
         }
 
         /* Terminate properly. */
@@ -880,7 +880,7 @@ stub_is_stopped(int sigval)
 	/* Send trap type (converted to signal) */
 
 	*ptr++ = 'T';
-	ptr = pack_hex_byte(ptr, sigval);
+	ptr = hex_byte_pack(ptr, sigval);
 
 	if (((reg.exs & 0xff00) >> 8) == 0xc) {
 
@@ -988,26 +988,26 @@ stub_is_stopped(int sigval)
 	}
 	/* Only send PC, frame and stack pointer. */
 	read_register(PC, &reg_cont);
-	ptr = pack_hex_byte(ptr, PC);
+	ptr = hex_byte_pack(ptr, PC);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]);
 	*ptr++ = ';';
 
 	read_register(R8, &reg_cont);
-	ptr = pack_hex_byte(ptr, R8);
+	ptr = hex_byte_pack(ptr, R8);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]);
 	*ptr++ = ';';
 
 	read_register(SP, &reg_cont);
-	ptr = pack_hex_byte(ptr, SP);
+	ptr = hex_byte_pack(ptr, SP);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]);
 	*ptr++ = ';';
 
 	/* Send ERP as well; this will save us an entire register fetch in some cases. */
         read_register(ERP, &reg_cont);
-	ptr = pack_hex_byte(ptr, ERP);
+	ptr = hex_byte_pack(ptr, ERP);
         *ptr++ = ':';
         ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]);
         *ptr++ = ';';