Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 311 insertions, 0 deletions

diff --git a/arch/frv/kernel/head-uc-fr401.S b/arch/frv/kernel/head-uc-fr401.S
new file mode 100644
index 00000000000..4ccf8414ae4
--- /dev/null
+++ b/arch/frv/kernel/head-uc-fr401.S
@@ -0,0 +1,311 @@
+/* head-uc-fr401.S: FR401/3/5 uc-linux specific bits of initialisation
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+#include <asm/spr-regs.h>
+#include <asm/mb86943a.h>
+#include "head.inc"
+
+
+#define __400_DBR0	0xfe000e00
+#define __400_DBR1	0xfe000e08
+#define __400_DBR2	0xfe000e10	/* not on FR401 */
+#define __400_DBR3	0xfe000e18	/* not on FR401 */
+#define __400_DAM0	0xfe000f00
+#define __400_DAM1	0xfe000f08
+#define __400_DAM2	0xfe000f10	/* not on FR401 */
+#define __400_DAM3	0xfe000f18	/* not on FR401 */
+#define __400_LGCR	0xfe000010
+#define __400_LCR	0xfe000100
+#define __400_LSBR	0xfe000c00
+
+	.section	.text.init,"ax"
+	.balign		4
+
+###############################################################################
+#
+# describe the position and layout of the SDRAM controller registers
+#
+#	ENTRY:			EXIT:
+# GR5	-			cacheline size
+# GR11	-			displacement of 2nd SDRAM addr reg from GR14
+# GR12	-			displacement of 3rd SDRAM addr reg from GR14
+# GR13	-			displacement of 4th SDRAM addr reg from GR14
+# GR14	-			address of 1st SDRAM addr reg
+# GR15	-			amount to shift address by to match SDRAM addr reg
+# GR26	&__head_reference	[saved]
+# GR30	LED address		[saved]
+# CC0	-			T if DBR0 is present
+# CC1	-			T if DBR1 is present
+# CC2	-			T if DBR2 is present (not FR401/FR401A)
+# CC3	-			T if DBR3 is present (not FR401/FR401A)
+#
+###############################################################################
+	.globl		__head_fr401_describe_sdram
+__head_fr401_describe_sdram:
+	sethi.p		%hi(__400_DBR0),gr14
+	setlo		%lo(__400_DBR0),gr14
+	setlos.p	#__400_DBR1-__400_DBR0,gr11
+	setlos		#__400_DBR2-__400_DBR0,gr12
+	setlos.p	#__400_DBR3-__400_DBR0,gr13
+	setlos		#32,gr5			; cacheline size
+	setlos.p	#0,gr15			; amount to shift addr reg by
+
+	# specify which DBR regs are present
+	setlos		#0x00ff,gr4
+	movgs		gr4,cccr
+	movsg		psr,gr3			; check for FR401/FR401A
+	srli		gr3,#25,gr3
+	subicc		gr3,#0x20>>1,gr0,icc0
+	bnelr		icc0,#1
+	setlos		#0x000f,gr4
+	movgs		gr4,cccr
+	bralr
+
+###############################################################################
+#
+# rearrange the bus controller registers
+#
+#	ENTRY:			EXIT:
+# GR26	&__head_reference	[saved]
+# GR30	LED address		revised LED address
+#
+###############################################################################
+	.globl		__head_fr401_set_busctl
+__head_fr401_set_busctl:
+	sethi.p		%hi(__400_LGCR),gr4
+	setlo		%lo(__400_LGCR),gr4
+	sethi.p		%hi(__400_LSBR),gr10
+	setlo		%lo(__400_LSBR),gr10
+	sethi.p		%hi(__400_LCR),gr11
+	setlo		%lo(__400_LCR),gr11
+
+	# set the bus controller
+	ldi		@(gr4,#0),gr5
+	ori		gr5,#0xff,gr5		; make sure all chip-selects are enabled
+	sti		gr5,@(gr4,#0)
+
+	sethi.p		%hi(__region_CS1),gr4
+	setlo		%lo(__region_CS1),gr4
+	sethi.p		%hi(__region_CS1_M),gr5
+	setlo		%lo(__region_CS1_M),gr5
+	sethi.p		%hi(__region_CS1_C),gr6
+	setlo		%lo(__region_CS1_C),gr6
+	sti		gr4,@(gr10,#1*0x08)
+	sti		gr5,@(gr10,#1*0x08+0x100)
+	sti		gr6,@(gr11,#1*0x08)
+	sethi.p		%hi(__region_CS2),gr4
+	setlo		%lo(__region_CS2),gr4
+	sethi.p		%hi(__region_CS2_M),gr5
+	setlo		%lo(__region_CS2_M),gr5
+	sethi.p		%hi(__region_CS2_C),gr6
+	setlo		%lo(__region_CS2_C),gr6
+	sti		gr4,@(gr10,#2*0x08)
+	sti		gr5,@(gr10,#2*0x08+0x100)
+	sti		gr6,@(gr11,#2*0x08)
+	sethi.p		%hi(__region_CS3),gr4
+	setlo		%lo(__region_CS3),gr4
+	sethi.p		%hi(__region_CS3_M),gr5
+	setlo		%lo(__region_CS3_M),gr5
+	sethi.p		%hi(__region_CS3_C),gr6
+	setlo		%lo(__region_CS3_C),gr6
+	sti		gr4,@(gr10,#3*0x08)
+	sti		gr5,@(gr10,#3*0x08+0x100)
+	sti		gr6,@(gr11,#3*0x08)
+	sethi.p		%hi(__region_CS4),gr4
+	setlo		%lo(__region_CS4),gr4
+	sethi.p		%hi(__region_CS4_M),gr5
+	setlo		%lo(__region_CS4_M),gr5
+	sethi.p		%hi(__region_CS4_C),gr6
+	setlo		%lo(__region_CS4_C),gr6
+	sti		gr4,@(gr10,#4*0x08)
+	sti		gr5,@(gr10,#4*0x08+0x100)
+	sti		gr6,@(gr11,#4*0x08)
+	sethi.p		%hi(__region_CS5),gr4
+	setlo		%lo(__region_CS5),gr4
+	sethi.p		%hi(__region_CS5_M),gr5
+	setlo		%lo(__region_CS5_M),gr5
+	sethi.p		%hi(__region_CS5_C),gr6
+	setlo		%lo(__region_CS5_C),gr6
+	sti		gr4,@(gr10,#5*0x08)
+	sti		gr5,@(gr10,#5*0x08+0x100)
+	sti		gr6,@(gr11,#5*0x08)
+	sethi.p		%hi(__region_CS6),gr4
+	setlo		%lo(__region_CS6),gr4
+	sethi.p		%hi(__region_CS6_M),gr5
+	setlo		%lo(__region_CS6_M),gr5
+	sethi.p		%hi(__region_CS6_C),gr6
+	setlo		%lo(__region_CS6_C),gr6
+	sti		gr4,@(gr10,#6*0x08)
+	sti		gr5,@(gr10,#6*0x08+0x100)
+	sti		gr6,@(gr11,#6*0x08)
+	sethi.p		%hi(__region_CS7),gr4
+	setlo		%lo(__region_CS7),gr4
+	sethi.p		%hi(__region_CS7_M),gr5
+	setlo		%lo(__region_CS7_M),gr5
+	sethi.p		%hi(__region_CS7_C),gr6
+	setlo		%lo(__region_CS7_C),gr6
+	sti		gr4,@(gr10,#7*0x08)
+	sti		gr5,@(gr10,#7*0x08+0x100)
+	sti		gr6,@(gr11,#7*0x08)
+	membar
+	bar
+
+	# adjust LED bank address
+	sethi.p		%hi(LED_ADDR - 0x20000000 +__region_CS2),gr30
+	setlo		%lo(LED_ADDR - 0x20000000 +__region_CS2),gr30
+	bralr
+
+###############################################################################
+#
+# determine the total SDRAM size
+#
+#	ENTRY:			EXIT:
+# GR25	-			SDRAM size
+# GR26	&__head_reference	[saved]
+# GR30	LED address		[saved]
+#
+###############################################################################
+	.globl		__head_fr401_survey_sdram
+__head_fr401_survey_sdram:
+	sethi.p		%hi(__400_DAM0),gr11
+	setlo		%lo(__400_DAM0),gr11
+	sethi.p		%hi(__400_DBR0),gr12
+	setlo		%lo(__400_DBR0),gr12
+
+	sethi.p		%hi(0xfe000000),gr17		; unused SDRAM DBR value
+	setlo		%lo(0xfe000000),gr17
+	setlos		#0,gr25
+
+	ldi		@(gr12,#0x00),gr4		; DAR0
+	subcc		gr4,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS0
+	ldi		@(gr11,#0x00),gr6		; DAM0: bits 31:20 match addr 31:20
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS0:
+
+	ldi		@(gr12,#0x08),gr4		; DAR1
+	subcc		gr4,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS1
+	ldi		@(gr11,#0x08),gr6		; DAM1: bits 31:20 match addr 31:20
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS1:
+
+	# FR401/FR401A does not have DCS2/3
+	movsg		psr,gr3
+	srli		gr3,#25,gr3
+	subicc		gr3,#0x20>>1,gr0,icc0
+	beq		icc0,#0,__head_no_DCS3
+
+	ldi		@(gr12,#0x10),gr4		; DAR2
+	subcc		gr4,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS2
+	ldi		@(gr11,#0x10),gr6		; DAM2: bits 31:20 match addr 31:20
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS2:
+
+	ldi		@(gr12,#0x18),gr4		; DAR3
+	subcc		gr4,gr17,gr0,icc0
+	beq		icc0,#0,__head_no_DCS3
+	ldi		@(gr11,#0x18),gr6		; DAM3: bits 31:20 match addr 31:20
+	add		gr25,gr6,gr25
+	addi		gr25,#1,gr25
+__head_no_DCS3:
+	bralr
+
+###############################################################################
+#
+# set the protection map with the I/DAMPR registers
+#
+#	ENTRY:			EXIT:
+# GR25	SDRAM size		[saved]
+# GR26	&__head_reference	[saved]
+# GR30	LED address		[saved]
+#
+###############################################################################
+	.globl		__head_fr401_set_protection
+__head_fr401_set_protection:
+	movsg		lr,gr27
+
+	# set the I/O region protection registers for FR401/3/5
+	sethi.p		%hi(__region_IO),gr5
+	setlo		%lo(__region_IO),gr5
+	ori		gr5,#xAMPRx_SS_512Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr5
+	movgs		gr0,iampr7
+	movgs		gr5,dampr7			; General I/O tile
+
+	# need to tile the remaining IAMPR/DAMPR registers to cover as much of the RAM as possible
+	# - start with the highest numbered registers
+	sethi.p		%hi(__kernel_image_end),gr8
+	setlo		%lo(__kernel_image_end),gr8
+	sethi.p		%hi(32768),gr4			; allow for a maximal allocator bitmap
+	setlo		%lo(32768),gr4
+	add		gr8,gr4,gr8
+	sethi.p		%hi(1024*2048-1),gr4		; round up to nearest 2MiB
+	setlo		%lo(1024*2048-1),gr4
+	add.p		gr8,gr4,gr8
+	not		gr4,gr4
+	and		gr8,gr4,gr8
+
+	sethi.p		%hi(__page_offset),gr9
+	setlo		%lo(__page_offset),gr9
+	add		gr9,gr25,gr9
+
+	# GR8 = base of uncovered RAM
+	# GR9 = top of uncovered RAM
+
+#ifdef CONFIG_MB93093_PDK
+	sethi.p		%hi(__region_CS2),gr4
+	setlo		%lo(__region_CS2),gr4
+	ori		gr4,#xAMPRx_SS_1Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr4
+	movgs		gr4,dampr6
+	movgs		gr0,iampr6
+#else
+	call		__head_split_region
+	movgs		gr4,iampr6
+	movgs		gr5,dampr6
+#endif
+	call		__head_split_region
+	movgs		gr4,iampr5
+	movgs		gr5,dampr5
+	call		__head_split_region
+	movgs		gr4,iampr4
+	movgs		gr5,dampr4
+	call		__head_split_region
+	movgs		gr4,iampr3
+	movgs		gr5,dampr3
+	call		__head_split_region
+	movgs		gr4,iampr2
+	movgs		gr5,dampr2
+	call		__head_split_region
+	movgs		gr4,iampr1
+	movgs		gr5,dampr1
+
+	# cover kernel core image with kernel-only segment
+	sethi.p		%hi(__page_offset),gr8
+	setlo		%lo(__page_offset),gr8
+	call		__head_split_region
+
+#ifdef CONFIG_PROTECT_KERNEL
+	ori.p		gr4,#xAMPRx_S_KERNEL,gr4
+	ori		gr5,#xAMPRx_S_KERNEL,gr5
+#endif
+
+	movgs		gr4,iampr0
+	movgs		gr5,dampr0
+	jmpl		@(gr27,gr0)