[PATCH] FRV: Use the generic IRQ stuff

Make the FRV arch use the generic IRQ code rather than having its own
routines for doing so.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 74 insertions, 41 deletions

diff --git a/arch/frv/kernel/irq-mb93093.c b/arch/frv/kernel/irq-mb93093.c
index 48b2a642088..f60db7988e7 100644
--- a/arch/frv/kernel/irq-mb93093.c
+++ b/arch/frv/kernel/irq-mb93093.c
@@ -1,6 +1,6 @@
 /* irq-mb93093.c: MB93093 FPGA interrupt handling
  *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
  *
  * This program is free software; you can redistribute it and/or
@@ -24,7 +24,6 @@
 #include <asm/delay.h>
 #include <asm/irq.h>
 #include <asm/irc-regs.h>
-#include <asm/irq-routing.h>
 
 #define __reg16(ADDR) (*(volatile unsigned short *)(__region_CS2 + (ADDR)))
 
@@ -33,66 +32,100 @@
 #define __get_IFR()	({ __reg16(0x02); })
 #define __clr_IFR(M)	do { __reg16(0x02) = ~(M); wmb(); } while(0)
 
-static void frv_fpga_doirq(struct irq_source *source);
-static void frv_fpga_control(struct irq_group *group, int irq, int on);
-
-/*****************************************************************************/
 /*
- * FPGA IRQ multiplexor
+ * off-CPU FPGA PIC operations
  */
-static struct irq_source frv_fpga[4] = {
-#define __FPGA(X, M)					\
-	[X] = {						\
-		.muxname	= "fpga."#X,		\
-		.irqmask	= M,			\
-		.doirq		= frv_fpga_doirq,	\
-	}
-
-	__FPGA(0, 0x0700),
-};
+static void frv_fpga_enable(unsigned int irq)
+{
+	uint16_t imr = __get_IMR();
 
-static struct irq_group frv_fpga_irqs = {
-	.first_irq	= IRQ_BASE_FPGA,
-	.control	= frv_fpga_control,
-	.sources = {
-		[ 8] = &frv_fpga[0],
-		[ 9] = &frv_fpga[0],
-		[10] = &frv_fpga[0],
-	},
-};
+	imr &= ~(1 << (irq - IRQ_BASE_FPGA));
 
+	__set_IMR(imr);
+}
 
-static void frv_fpga_control(struct irq_group *group, int index, int on)
+static void frv_fpga_disable(unsigned int irq)
 {
 	uint16_t imr = __get_IMR();
 
-	if (on)
-		imr &= ~(1 << index);
-	else
-		imr |= 1 << index;
+	imr |= 1 << (irq - IRQ_BASE_FPGA);
 
 	__set_IMR(imr);
 }
 
-static void frv_fpga_doirq(struct irq_source *source)
+static void frv_fpga_ack(unsigned int irq)
+{
+	__clr_IFR(1 << (irq - IRQ_BASE_FPGA));
+}
+
+static void frv_fpga_end(unsigned int irq)
+{
+}
+
+static struct irq_chip frv_fpga_pic = {
+	.name		= "mb93093",
+	.enable		= frv_fpga_enable,
+	.disable	= frv_fpga_disable,
+	.ack		= frv_fpga_ack,
+	.mask		= frv_fpga_disable,
+	.unmask		= frv_fpga_enable,
+	.end		= frv_fpga_end,
+};
+
+/*
+ * FPGA PIC interrupt handler
+ */
+static irqreturn_t fpga_interrupt(int irq, void *_mask, struct pt_regs *regs)
 {
-	uint16_t mask, imr;
+	uint16_t imr, mask = (unsigned long) _mask;
+	irqreturn_t iret = 0;
 
 	imr = __get_IMR();
-	mask = source->irqmask & ~imr & __get_IFR();
-	if (mask) {
-		__set_IMR(imr | mask);
-		__clr_IFR(mask);
-		distribute_irqs(&frv_fpga_irqs, mask);
-		__set_IMR(imr);
+	mask = mask & ~imr & __get_IFR();
+
+	/* poll all the triggered IRQs */
+	while (mask) {
+		int irq;
+
+		asm("scan %1,gr0,%0" : "=r"(irq) : "r"(mask));
+		irq = 31 - irq;
+		mask &= ~(1 << irq);
+
+		if (__do_IRQ(IRQ_BASE_FPGA + irq, regs))
+			iret |= IRQ_HANDLED;
 	}
+
+	return iret;
 }
 
+/*
+ * define an interrupt action for each FPGA PIC output
+ * - use dev_id to indicate the FPGA PIC input to output mappings
+ */
+static struct irqaction fpga_irq[1]  = {
+	[0] = {
+		.handler	= fpga_interrupt,
+		.flags		= IRQF_DISABLED,
+		.mask		= CPU_MASK_NONE,
+		.name		= "fpga.0",
+		.dev_id		= (void *) 0x0700UL,
+	}
+};
+
+/*
+ * initialise the motherboard FPGA's PIC
+ */
 void __init fpga_init(void)
 {
+	int irq;
+
+	/* all PIC inputs are all set to be edge triggered */
 	__set_IMR(0x0700);
 	__clr_IFR(0x0000);
 
-	frv_irq_route_external(&frv_fpga[0], IRQ_CPU_EXTERNAL2);
-	frv_irq_set_group(&frv_fpga_irqs);
+	for (irq = IRQ_BASE_FPGA + 8; irq <= IRQ_BASE_FPGA + 10; irq++)
+		set_irq_chip_and_handler(irq, &frv_fpga_pic, handle_edge_irq);
+
+	/* the FPGA drives external IRQ input #2 on the CPU PIC */
+	setup_irq(IRQ_CPU_EXTERNAL2, &fpga_irq[0]);
 }