summaryrefslogtreecommitdiffstats
path: root/arch/i386/kernel/apic.c
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@linutronix.de>2007-10-11 11:12:16 +0200
committerThomas Gleixner <tglx@linutronix.de>2007-10-11 11:12:16 +0200
commit0cc369a273ac6bacee9614b643de1fa283967a68 (patch)
tree9657df26ea4a2f2215a8db070e86ea063284cef6 /arch/i386/kernel/apic.c
parentb9fe30ac5cdfc4337a672a498a4ba4e8d5e18728 (diff)
i386: prepare shared kernel/apic.c
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'arch/i386/kernel/apic.c')
-rw-r--r--arch/i386/kernel/apic.c1566
1 files changed, 0 insertions, 1566 deletions
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
deleted file mode 100644
index 3d67ae18d76..00000000000
--- a/arch/i386/kernel/apic.c
+++ /dev/null
@@ -1,1566 +0,0 @@
-/*
- * Local APIC handling, local APIC timers
- *
- * (c) 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- * Fixes
- * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
- * thanks to Eric Gilmore
- * and Rolf G. Tews
- * for testing these extensively.
- * Maciej W. Rozycki : Various updates and fixes.
- * Mikael Pettersson : Power Management for UP-APIC.
- * Pavel Machek and
- * Mikael Pettersson : PM converted to driver model.
- */
-
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/interrupt.h>
-#include <linux/mc146818rtc.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/cpu.h>
-#include <linux/clockchips.h>
-#include <linux/acpi_pmtmr.h>
-#include <linux/module.h>
-#include <linux/dmi.h>
-
-#include <asm/atomic.h>
-#include <asm/smp.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/desc.h>
-#include <asm/arch_hooks.h>
-#include <asm/hpet.h>
-#include <asm/i8253.h>
-#include <asm/nmi.h>
-
-#include <mach_apic.h>
-#include <mach_apicdef.h>
-#include <mach_ipi.h>
-
-#include "io_ports.h"
-
-/*
- * Sanity check
- */
-#if (SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F
-# error SPURIOUS_APIC_VECTOR definition error
-#endif
-
-/*
- * Knob to control our willingness to enable the local APIC.
- *
- * -1=force-disable, +1=force-enable
- */
-static int enable_local_apic __initdata = 0;
-
-/* Local APIC timer verification ok */
-static int local_apic_timer_verify_ok;
-/* Disable local APIC timer from the kernel commandline or via dmi quirk
- or using CPU MSR check */
-int local_apic_timer_disabled;
-/* Local APIC timer works in C2 */
-int local_apic_timer_c2_ok;
-EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
-
-/*
- * Debug level, exported for io_apic.c
- */
-int apic_verbosity;
-
-static unsigned int calibration_result;
-
-static int lapic_next_event(unsigned long delta,
- struct clock_event_device *evt);
-static void lapic_timer_setup(enum clock_event_mode mode,
- struct clock_event_device *evt);
-static void lapic_timer_broadcast(cpumask_t mask);
-static void apic_pm_activate(void);
-
-/*
- * The local apic timer can be used for any function which is CPU local.
- */
-static struct clock_event_device lapic_clockevent = {
- .name = "lapic",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
- | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY,
- .shift = 32,
- .set_mode = lapic_timer_setup,
- .set_next_event = lapic_next_event,
- .broadcast = lapic_timer_broadcast,
- .rating = 100,
- .irq = -1,
-};
-static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
-
-/* Local APIC was disabled by the BIOS and enabled by the kernel */
-static int enabled_via_apicbase;
-
-/*
- * Get the LAPIC version
- */
-static inline int lapic_get_version(void)
-{
- return GET_APIC_VERSION(apic_read(APIC_LVR));
-}
-
-/*
- * Check, if the APIC is integrated or a seperate chip
- */
-static inline int lapic_is_integrated(void)
-{
- return APIC_INTEGRATED(lapic_get_version());
-}
-
-/*
- * Check, whether this is a modern or a first generation APIC
- */
-static int modern_apic(void)
-{
- /* AMD systems use old APIC versions, so check the CPU */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
- boot_cpu_data.x86 >= 0xf)
- return 1;
- return lapic_get_version() >= 0x14;
-}
-
-void apic_wait_icr_idle(void)
-{
- while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
- cpu_relax();
-}
-
-unsigned long safe_apic_wait_icr_idle(void)
-{
- unsigned long send_status;
- int timeout;
-
- timeout = 0;
- do {
- send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
- if (!send_status)
- break;
- udelay(100);
- } while (timeout++ < 1000);
-
- return send_status;
-}
-
-/**
- * enable_NMI_through_LVT0 - enable NMI through local vector table 0
- */
-void enable_NMI_through_LVT0 (void * dummy)
-{
- unsigned int v = APIC_DM_NMI;
-
- /* Level triggered for 82489DX */
- if (!lapic_is_integrated())
- v |= APIC_LVT_LEVEL_TRIGGER;
- apic_write_around(APIC_LVT0, v);
-}
-
-/**
- * get_physical_broadcast - Get number of physical broadcast IDs
- */
-int get_physical_broadcast(void)
-{
- return modern_apic() ? 0xff : 0xf;
-}
-
-/**
- * lapic_get_maxlvt - get the maximum number of local vector table entries
- */
-int lapic_get_maxlvt(void)
-{
- unsigned int v = apic_read(APIC_LVR);
-
- /* 82489DXs do not report # of LVT entries. */
- return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
-}
-
-/*
- * Local APIC timer
- */
-
-/* Clock divisor is set to 16 */
-#define APIC_DIVISOR 16
-
-/*
- * This function sets up the local APIC timer, with a timeout of
- * 'clocks' APIC bus clock. During calibration we actually call
- * this function twice on the boot CPU, once with a bogus timeout
- * value, second time for real. The other (noncalibrating) CPUs
- * call this function only once, with the real, calibrated value.
- *
- * We do reads before writes even if unnecessary, to get around the
- * P5 APIC double write bug.
- */
-static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
-{
- unsigned int lvtt_value, tmp_value;
-
- lvtt_value = LOCAL_TIMER_VECTOR;
- if (!oneshot)
- lvtt_value |= APIC_LVT_TIMER_PERIODIC;
- if (!lapic_is_integrated())
- lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
-
- if (!irqen)
- lvtt_value |= APIC_LVT_MASKED;
-
- apic_write_around(APIC_LVTT, lvtt_value);
-
- /*
- * Divide PICLK by 16
- */
- tmp_value = apic_read(APIC_TDCR);
- apic_write_around(APIC_TDCR, (tmp_value
- & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
- | APIC_TDR_DIV_16);
-
- if (!oneshot)
- apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
-}
-
-/*
- * Program the next event, relative to now
- */
-static int lapic_next_event(unsigned long delta,
- struct clock_event_device *evt)
-{
- apic_write_around(APIC_TMICT, delta);
- return 0;
-}
-
-/*
- * Setup the lapic timer in periodic or oneshot mode
- */
-static void lapic_timer_setup(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned long flags;
- unsigned int v;
-
- /* Lapic used for broadcast ? */
- if (!local_apic_timer_verify_ok)
- return;
-
- local_irq_save(flags);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- case CLOCK_EVT_MODE_ONESHOT:
- __setup_APIC_LVTT(calibration_result,
- mode != CLOCK_EVT_MODE_PERIODIC, 1);
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- v = apic_read(APIC_LVTT);
- v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
- apic_write_around(APIC_LVTT, v);
- break;
- case CLOCK_EVT_MODE_RESUME:
- /* Nothing to do here */
- break;
- }
-
- local_irq_restore(flags);
-}
-
-/*
- * Local APIC timer broadcast function
- */
-static void lapic_timer_broadcast(cpumask_t mask)
-{
-#ifdef CONFIG_SMP
- send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
-#endif
-}
-
-/*
- * Setup the local APIC timer for this CPU. Copy the initilized values
- * of the boot CPU and register the clock event in the framework.
- */
-static void __devinit setup_APIC_timer(void)
-{
- struct clock_event_device *levt = &__get_cpu_var(lapic_events);
-
- memcpy(levt, &lapic_clockevent, sizeof(*levt));
- levt->cpumask = cpumask_of_cpu(smp_processor_id());
-
- clockevents_register_device(levt);
-}
-
-/*
- * In this functions we calibrate APIC bus clocks to the external timer.
- *
- * We want to do the calibration only once since we want to have local timer
- * irqs syncron. CPUs connected by the same APIC bus have the very same bus
- * frequency.
- *
- * This was previously done by reading the PIT/HPET and waiting for a wrap
- * around to find out, that a tick has elapsed. I have a box, where the PIT
- * readout is broken, so it never gets out of the wait loop again. This was
- * also reported by others.
- *
- * Monitoring the jiffies value is inaccurate and the clockevents
- * infrastructure allows us to do a simple substitution of the interrupt
- * handler.
- *
- * The calibration routine also uses the pm_timer when possible, as the PIT
- * happens to run way too slow (factor 2.3 on my VAIO CoreDuo, which goes
- * back to normal later in the boot process).
- */
-
-#define LAPIC_CAL_LOOPS (HZ/10)
-
-static __initdata int lapic_cal_loops = -1;
-static __initdata long lapic_cal_t1, lapic_cal_t2;
-static __initdata unsigned long long lapic_cal_tsc1, lapic_cal_tsc2;
-static __initdata unsigned long lapic_cal_pm1, lapic_cal_pm2;
-static __initdata unsigned long lapic_cal_j1, lapic_cal_j2;
-
-/*
- * Temporary interrupt handler.
- */
-static void __init lapic_cal_handler(struct clock_event_device *dev)
-{
- unsigned long long tsc = 0;
- long tapic = apic_read(APIC_TMCCT);
- unsigned long pm = acpi_pm_read_early();
-
- if (cpu_has_tsc)
- rdtscll(tsc);
-
- switch (lapic_cal_loops++) {
- case 0:
- lapic_cal_t1 = tapic;
- lapic_cal_tsc1 = tsc;
- lapic_cal_pm1 = pm;
- lapic_cal_j1 = jiffies;
- break;
-
- case LAPIC_CAL_LOOPS:
- lapic_cal_t2 = tapic;
- lapic_cal_tsc2 = tsc;
- if (pm < lapic_cal_pm1)
- pm += ACPI_PM_OVRRUN;
- lapic_cal_pm2 = pm;
- lapic_cal_j2 = jiffies;
- break;
- }
-}
-
-/*
- * Setup the boot APIC
- *
- * Calibrate and verify the result.
- */
-void __init setup_boot_APIC_clock(void)
-{
- struct clock_event_device *levt = &__get_cpu_var(lapic_events);
- const long pm_100ms = PMTMR_TICKS_PER_SEC/10;
- const long pm_thresh = pm_100ms/100;
- void (*real_handler)(struct clock_event_device *dev);
- unsigned long deltaj;
- long delta, deltapm;
- int pm_referenced = 0;
-
- /*
- * The local apic timer can be disabled via the kernel
- * commandline or from the CPU detection code. Register the lapic
- * timer as a dummy clock event source on SMP systems, so the
- * broadcast mechanism is used. On UP systems simply ignore it.
- */
- if (local_apic_timer_disabled) {
- /* No broadcast on UP ! */
- if (num_possible_cpus() > 1)
- setup_APIC_timer();
- return;
- }
-
- apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
- "calibrating APIC timer ...\n");
-
- local_irq_disable();
-
- /* Replace the global interrupt handler */
- real_handler = global_clock_event->event_handler;
- global_clock_event->event_handler = lapic_cal_handler;
-
- /*
- * Setup the APIC counter to 1e9. There is no way the lapic
- * can underflow in the 100ms detection time frame
- */
- __setup_APIC_LVTT(1000000000, 0, 0);
-
- /* Let the interrupts run */
- local_irq_enable();
-
- while (lapic_cal_loops <= LAPIC_CAL_LOOPS)
- cpu_relax();
-
- local_irq_disable();
-
- /* Restore the real event handler */
- global_clock_event->event_handler = real_handler;
-
- /* Build delta t1-t2 as apic timer counts down */
- delta = lapic_cal_t1 - lapic_cal_t2;
- apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta);
-
- /* Check, if the PM timer is available */
- deltapm = lapic_cal_pm2 - lapic_cal_pm1;
- apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm);
-
- if (deltapm) {
- unsigned long mult;
- u64 res;
-
- mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC, 22);
-
- if (deltapm > (pm_100ms - pm_thresh) &&
- deltapm < (pm_100ms + pm_thresh)) {
- apic_printk(APIC_VERBOSE, "... PM timer result ok\n");
- } else {
- res = (((u64) deltapm) * mult) >> 22;
- do_div(res, 1000000);
- printk(KERN_WARNING "APIC calibration not consistent "
- "with PM Timer: %ldms instead of 100ms\n",
- (long)res);
- /* Correct the lapic counter value */
- res = (((u64) delta ) * pm_100ms);
- do_div(res, deltapm);
- printk(KERN_INFO "APIC delta adjusted to PM-Timer: "
- "%lu (%ld)\n", (unsigned long) res, delta);
- delta = (long) res;
- }
- pm_referenced = 1;
- }
-
- /* Calculate the scaled math multiplication factor */
- lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS, 32);
- lapic_clockevent.max_delta_ns =
- clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
- lapic_clockevent.min_delta_ns =
- clockevent_delta2ns(0xF, &lapic_clockevent);
-
- calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
-
- apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta);
- apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult);
- apic_printk(APIC_VERBOSE, "..... calibration result: %u\n",
- calibration_result);
-
- if (cpu_has_tsc) {
- delta = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
- apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
- "%ld.%04ld MHz.\n",
- (delta / LAPIC_CAL_LOOPS) / (1000000 / HZ),
- (delta / LAPIC_CAL_LOOPS) % (1000000 / HZ));
- }
-
- apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
- "%u.%04u MHz.\n",
- calibration_result / (1000000 / HZ),
- calibration_result % (1000000 / HZ));
-
- local_apic_timer_verify_ok = 1;
-
- /* We trust the pm timer based calibration */
- if (!pm_referenced) {
- apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
-
- /*
- * Setup the apic timer manually
- */
- levt->event_handler = lapic_cal_handler;
- lapic_timer_setup(CLOCK_EVT_MODE_PERIODIC, levt);
- lapic_cal_loops = -1;
-
- /* Let the interrupts run */
- local_irq_enable();
-
- while (lapic_cal_loops <= LAPIC_CAL_LOOPS)
- cpu_relax();
-
- local_irq_disable();
-
- /* Stop the lapic timer */
- lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, levt);
-
- local_irq_enable();
-
- /* Jiffies delta */
- deltaj = lapic_cal_j2 - lapic_cal_j1;
- apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj);
-
- /* Check, if the jiffies result is consistent */
- if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2)
- apic_printk(APIC_VERBOSE, "... jiffies result ok\n");
- else
- local_apic_timer_verify_ok = 0;
- } else
- local_irq_enable();
-
- if (!local_apic_timer_verify_ok) {
- printk(KERN_WARNING
- "APIC timer disabled due to verification failure.\n");
- /* No broadcast on UP ! */
- if (num_possible_cpus() == 1)
- return;
- } else {
- /*
- * If nmi_watchdog is set to IO_APIC, we need the
- * PIT/HPET going. Otherwise register lapic as a dummy
- * device.
- */
- if (nmi_watchdog != NMI_IO_APIC)
- lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
- else
- printk(KERN_WARNING "APIC timer registered as dummy,"
- " due to nmi_watchdog=1!\n");
- }
-
- /* Setup the lapic or request the broadcast */
- setup_APIC_timer();
-}
-
-void __devinit setup_secondary_APIC_clock(void)
-{
- setup_APIC_timer();
-}
-
-/*
- * The guts of the apic timer interrupt
- */
-static void local_apic_timer_interrupt(void)
-{
- int cpu = smp_processor_id();
- struct clock_event_device *evt = &per_cpu(lapic_events, cpu);
-
- /*
- * Normally we should not be here till LAPIC has been initialized but
- * in some cases like kdump, its possible that there is a pending LAPIC
- * timer interrupt from previous kernel's context and is delivered in
- * new kernel the moment interrupts are enabled.
- *
- * Interrupts are enabled early and LAPIC is setup much later, hence
- * its possible that when we get here evt->event_handler is NULL.
- * Check for event_handler being NULL and discard the interrupt as
- * spurious.
- */
- if (!evt->event_handler) {
- printk(KERN_WARNING
- "Spurious LAPIC timer interrupt on cpu %d\n", cpu);
- /* Switch it off */
- lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt);
- return;
- }
-
- per_cpu(irq_stat, cpu).apic_timer_irqs++;
-
- evt->event_handler(evt);
-}
-
-/*
- * Local APIC timer interrupt. This is the most natural way for doing
- * local interrupts, but local timer interrupts can be emulated by
- * broadcast interrupts too. [in case the hw doesn't support APIC timers]
- *
- * [ if a single-CPU system runs an SMP kernel then we call the local
- * interrupt as well. Thus we cannot inline the local irq ... ]
- */
-
-void fastcall smp_apic_timer_interrupt(struct pt_regs *regs)
-{
- struct pt_regs *old_regs = set_irq_regs(regs);
-
- /*
- * NOTE! We'd better ACK the irq immediately,
- * because timer handling can be slow.
- */
- ack_APIC_irq();
- /*
- * update_process_times() expects us to have done irq_enter().
- * Besides, if we don't timer interrupts ignore the global
- * interrupt lock, which is the WrongThing (tm) to do.
- */
- irq_enter();
- local_apic_timer_interrupt();
- irq_exit();
-
- set_irq_regs(old_regs);
-}
-
-int setup_profiling_timer(unsigned int multiplier)
-{
- return -EINVAL;
-}
-
-/*
- * Local APIC start and shutdown
- */
-
-/**
- * clear_local_APIC - shutdown the local APIC
- *
- * This is called, when a CPU is disabled and before rebooting, so the state of
- * the local APIC has no dangling leftovers. Also used to cleanout any BIOS
- * leftovers during boot.
- */
-void clear_local_APIC(void)
-{
- int maxlvt = lapic_get_maxlvt();
- unsigned long v;
-
- /*
- * Masking an LVT entry can trigger a local APIC error
- * if the vector is zero. Mask LVTERR first to prevent this.
- */
- if (maxlvt >= 3) {
- v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
- apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED);
- }
- /*
- * Careful: we have to set masks only first to deassert
- * any level-triggered sources.
- */
- v = apic_read(APIC_LVTT);
- apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
- v = apic_read(APIC_LVT0);
- apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
- v = apic_read(APIC_LVT1);
- apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED);
- if (maxlvt >= 4) {
- v = apic_read(APIC_LVTPC);
- apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
- }
-
- /* lets not touch this if we didn't frob it */
-#ifdef CONFIG_X86_MCE_P4THERMAL
- if (maxlvt >= 5) {
- v = apic_read(APIC_LVTTHMR);
- apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED);
- }
-#endif
- /*
- * Clean APIC state for other OSs:
- */
- apic_write_around(APIC_LVTT, APIC_LVT_MASKED);
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
- apic_write_around(APIC_LVT1, APIC_LVT_MASKED);
- if (maxlvt >= 3)
- apic_write_around(APIC_LVTERR, APIC_LVT_MASKED);
- if (maxlvt >= 4)
- apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
-
-#ifdef CONFIG_X86_MCE_P4THERMAL
- if (maxlvt >= 5)
- apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED);
-#endif
- /* Integrated APIC (!82489DX) ? */
- if (lapic_is_integrated()) {
- if (maxlvt > 3)
- /* Clear ESR due to Pentium errata 3AP and 11AP */
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
- }
-}
-
-/**
- * disable_local_APIC - clear and disable the local APIC
- */
-void disable_local_APIC(void)
-{
- unsigned long value;
-
- clear_local_APIC();
-
- /*
- * Disable APIC (implies clearing of registers
- * for 82489DX!).
- */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_SPIV_APIC_ENABLED;
- apic_write_around(APIC_SPIV, value);
-
- /*
- * When LAPIC was disabled by the BIOS and enabled by the kernel,
- * restore the disabled state.
- */
- if (enabled_via_apicbase) {
- unsigned int l, h;
-
- rdmsr(MSR_IA32_APICBASE, l, h);
- l &= ~MSR_IA32_APICBASE_ENABLE;
- wrmsr(MSR_IA32_APICBASE, l, h);
- }
-}
-
-/*
- * If Linux enabled the LAPIC against the BIOS default disable it down before
- * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and
- * not power-off. Additionally clear all LVT entries before disable_local_APIC
- * for the case where Linux didn't enable the LAPIC.
- */
-void lapic_shutdown(void)
-{
- unsigned long flags;
-
- if (!cpu_has_apic)
- return;
-
- local_irq_save(flags);
- clear_local_APIC();
-
- if (enabled_via_apicbase)
- disable_local_APIC();
-
- local_irq_restore(flags);
-}
-
-/*
- * This is to verify that we're looking at a real local APIC.
- * Check these against your board if the CPUs aren't getting
- * started for no apparent reason.
- */
-int __init verify_local_APIC(void)
-{
- unsigned int reg0, reg1;
-
- /*
- * The version register is read-only in a real APIC.
- */
- reg0 = apic_read(APIC_LVR);
- apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
- apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
- reg1 = apic_read(APIC_LVR);
- apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
-
- /*
- * The two version reads above should print the same
- * numbers. If the second one is different, then we
- * poke at a non-APIC.
- */
- if (reg1 != reg0)
- return 0;
-
- /*
- * Check if the version looks reasonably.
- */
- reg1 = GET_APIC_VERSION(reg0);
- if (reg1 == 0x00 || reg1 == 0xff)
- return 0;
- reg1 = lapic_get_maxlvt();
- if (reg1 < 0x02 || reg1 == 0xff)
- return 0;
-
- /*
- * The ID register is read/write in a real APIC.
- */
- reg0 = apic_read(APIC_ID);
- apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
-
- /*
- * The next two are just to see if we have sane values.
- * They're only really relevant if we're in Virtual Wire
- * compatibility mode, but most boxes are anymore.
- */
- reg0 = apic_read(APIC_LVT0);
- apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0);
- reg1 = apic_read(APIC_LVT1);
- apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
-
- return 1;
-}
-
-/**
- * sync_Arb_IDs - synchronize APIC bus arbitration IDs
- */
-void __init sync_Arb_IDs(void)
-{
- /*
- * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not
- * needed on AMD.
- */
- if (modern_apic())
- return;
- /*
- * Wait for idle.
- */
- apic_wait_icr_idle();
-
- apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
- apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
- | APIC_DM_INIT);
-}
-
-/*
- * An initial setup of the virtual wire mode.
- */
-void __init init_bsp_APIC(void)
-{
- unsigned long value;
-
- /*
- * Don't do the setup now if we have a SMP BIOS as the
- * through-I/O-APIC virtual wire mode might be active.
- */
- if (smp_found_config || !cpu_has_apic)
- return;
-
- /*
- * Do not trust the local APIC being empty at bootup.
- */
- clear_local_APIC();
-
- /*
- * Enable APIC.
- */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_VECTOR_MASK;
- value |= APIC_SPIV_APIC_ENABLED;
-
- /* This bit is reserved on P4/Xeon and should be cleared */
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
- (boot_cpu_data.x86 == 15))
- value &= ~APIC_SPIV_FOCUS_DISABLED;
- else
- value |= APIC_SPIV_FOCUS_DISABLED;
- value |= SPURIOUS_APIC_VECTOR;
- apic_write_around(APIC_SPIV, value);
-
- /*
- * Set up the virtual wire mode.
- */
- apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
- value = APIC_DM_NMI;
- if (!lapic_is_integrated()) /* 82489DX */
- value |= APIC_LVT_LEVEL_TRIGGER;
- apic_write_around(APIC_LVT1, value);
-}
-
-/**
- * setup_local_APIC - setup the local APIC
- */
-void __devinit setup_local_APIC(void)
-{
- unsigned long oldvalue, value, maxlvt, integrated;
- int i, j;
-
- /* Pound the ESR really hard over the head with a big hammer - mbligh */
- if (esr_disable) {
- apic_write(APIC_ESR, 0);
- apic_write(APIC_ESR, 0);
- apic_write(APIC_ESR, 0);
- apic_write(APIC_ESR, 0);
- }
-
- integrated = lapic_is_integrated();
-
- /*
- * Double-check whether this APIC is really registered.
- */
- if (!apic_id_registered())
- BUG();
-
- /*
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116). So here it goes...
- */
- init_apic_ldr();
-
- /*
- * Set Task Priority to 'accept all'. We never change this
- * later on.
- */
- value = apic_read(APIC_TASKPRI);
- value &= ~APIC_TPRI_MASK;
- apic_write_around(APIC_TASKPRI, value);
-
- /*
- * After a crash, we no longer service the interrupts and a pending
- * interrupt from previous kernel might still have ISR bit set.
- *
- * Most probably by now CPU has serviced that pending interrupt and
- * it might not have done the ack_APIC_irq() because it thought,
- * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
- * does not clear the ISR bit and cpu thinks it has already serivced
- * the interrupt. Hence a vector might get locked. It was noticed
- * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
- */
- for (i = APIC_ISR_NR - 1; i >= 0; i--) {
- value = apic_read(APIC_ISR + i*0x10);
- for (j = 31; j >= 0; j--) {
- if (value & (1<<j))
- ack_APIC_irq();
- }
- }
-
- /*
- * Now that we are all set up, enable the APIC
- */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_VECTOR_MASK;
- /*
- * Enable APIC
- */
- value |= APIC_SPIV_APIC_ENABLED;
-
- /*
- * Some unknown Intel IO/APIC (or APIC) errata is biting us with
- * certain networking cards. If high frequency interrupts are
- * happening on a particular IOAPIC pin, plus the IOAPIC routing
- * entry is masked/unmasked at a high rate as well then sooner or
- * later IOAPIC line gets 'stuck', no more interrupts are received
- * from the device. If focus CPU is disabled then the hang goes
- * away, oh well :-(
- *
- * [ This bug can be reproduced easily with a level-triggered
- * PCI Ne2000 networking cards and PII/PIII processors, dual
- * BX chipset. ]
- */
- /*
- * Actually disabling the focus CPU check just makes the hang less
- * frequent as it makes the interrupt distributon model be more
- * like LRU than MRU (the short-term load is more even across CPUs).
- * See also the comment in end_level_ioapic_irq(). --macro
- */
-
- /* Enable focus processor (bit==0) */
- value &= ~APIC_SPIV_FOCUS_DISABLED;
-
- /*
- * Set spurious IRQ vector
- */
- value |= SPURIOUS_APIC_VECTOR;
- apic_write_around(APIC_SPIV, value);
-
- /*
- * Set up LVT0, LVT1:
- *
- * set up through-local-APIC on the BP's LINT0. This is not
- * strictly necessery in pure symmetric-IO mode, but sometimes
- * we delegate interrupts to the 8259A.
- */
- /*
- * TODO: set up through-local-APIC from through-I/O-APIC? --macro
- */
- value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
- if (!smp_processor_id() && (pic_mode || !value)) {
- value = APIC_DM_EXTINT;
- apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n",
- smp_processor_id());
- } else {
- value = APIC_DM_EXTINT | APIC_LVT_MASKED;
- apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
- smp_processor_id());
- }
- apic_write_around(APIC_LVT0, value);
-
- /*
- * only the BP should see the LINT1 NMI signal, obviously.
- */
- if (!smp_processor_id())
- value = APIC_DM_NMI;
- else
- value = APIC_DM_NMI | APIC_LVT_MASKED;
- if (!integrated) /* 82489DX */
- value |= APIC_LVT_LEVEL_TRIGGER;
- apic_write_around(APIC_LVT1, value);
-
- if (integrated && !esr_disable) { /* !82489DX */
- maxlvt = lapic_get_maxlvt();
- if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
- apic_write(APIC_ESR, 0);
- oldvalue = apic_read(APIC_ESR);
-
- /* enables sending errors */
- value = ERROR_APIC_VECTOR;
- apic_write_around(APIC_LVTERR, value);
- /*
- * spec says clear errors after enabling vector.
- */
- if (maxlvt > 3)
- apic_write(APIC_ESR, 0);
- value = apic_read(APIC_ESR);
- if (value != oldvalue)
- apic_printk(APIC_VERBOSE, "ESR value before enabling "
- "vector: 0x%08lx after: 0x%08lx\n",
- oldvalue, value);
- } else {
- if (esr_disable)
- /*
- * Something untraceble is creating bad interrupts on
- * secondary quads ... for the moment, just leave the
- * ESR disabled - we can't do anything useful with the
- * errors anyway - mbligh
- */
- printk(KERN_INFO "Leaving ESR disabled.\n");
- else
- printk(KERN_INFO "No ESR for 82489DX.\n");
- }
-
- /* Disable the local apic timer */
- value = apic_read(APIC_LVTT);
- value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
- apic_write_around(APIC_LVTT, value);
-
- setup_apic_nmi_watchdog(NULL);
- apic_pm_activate();
-}
-
-/*
- * Detect and initialize APIC
- */
-static int __init detect_init_APIC (void)
-{
- u32 h, l, features;
-
- /* Disabled by kernel option? */
- if (enable_local_apic < 0)
- return -1;
-
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_AMD:
- if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
- (boot_cpu_data.x86 == 15))
- break;
- goto no_apic;
- case X86_VENDOR_INTEL:
- if (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15 ||
- (boot_cpu_data.x86 == 5 && cpu_has_apic))
- break;
- goto no_apic;
- default:
- goto no_apic;
- }
-
- if (!cpu_has_apic) {
- /*
- * Over-ride BIOS and try to enable the local APIC only if
- * "lapic" specified.
- */
- if (enable_local_apic <= 0) {
- printk(KERN_INFO "Local APIC disabled by BIOS -- "
- "you can enable it with \"lapic\"\n");
- return -1;
- }
- /*
- * Some BIOSes disable the local APIC in the APIC_BASE
- * MSR. This can only be done in software for Intel P6 or later
- * and AMD K7 (Model > 1) or later.
- */
- rdmsr(MSR_IA32_APICBASE, l, h);
- if (!(l & MSR_IA32_APICBASE_ENABLE)) {
- printk(KERN_INFO
- "Local APIC disabled by BIOS -- reenabling.\n");
- l &= ~MSR_IA32_APICBASE_BASE;
- l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
- wrmsr(MSR_IA32_APICBASE, l, h);
- enabled_via_apicbase = 1;
- }
- }
- /*
- * The APIC feature bit should now be enabled
- * in `cpuid'
- */
- features = cpuid_edx(1);
- if (!(features & (1 << X86_FEATURE_APIC))) {
- printk(KERN_WARNING "Could not enable APIC!\n");
- return -1;
- }
- set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
- /* The BIOS may have set up the APIC at some other address */
- rdmsr(MSR_IA32_APICBASE, l, h);
- if (l & MSR_IA32_APICBASE_ENABLE)
- mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
-
- if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED)
- nmi_watchdog = NMI_LOCAL_APIC;
-
- printk(KERN_INFO "Found and enabled local APIC!\n");
-
- apic_pm_activate();
-
- return 0;
-
-no_apic:
- printk(KERN_INFO "No local APIC present or hardware disabled\n");
- return -1;
-}
-
-/**
- * init_apic_mappings - initialize APIC mappings
- */
-void __init init_apic_mappings(void)
-{
- unsigned long apic_phys;
-
- /*
- * If no local APIC can be found then set up a fake all
- * zeroes page to simulate the local APIC and another
- * one for the IO-APIC.
- */
- if (!smp_found_config && detect_init_APIC()) {
- apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
- apic_phys = __pa(apic_phys);
- } else
- apic_phys = mp_lapic_addr;
-
- set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
- printk(KERN_DEBUG "mapped APIC to %08lx (%08lx)\n", APIC_BASE,
- apic_phys);
-
- /*
- * Fetch the APIC ID of the BSP in case we have a
- * default configuration (or the MP table is broken).
- */
- if (boot_cpu_physical_apicid == -1U)
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
-
-#ifdef CONFIG_X86_IO_APIC
- {
- unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
- int i;
-
- for (i = 0; i < nr_ioapics; i++) {
- if (smp_found_config) {
- ioapic_phys = mp_ioapics[i].mpc_apicaddr;
- if (!ioapic_phys) {
- printk(KERN_ERR
- "WARNING: bogus zero IO-APIC "
- "address found in MPTABLE, "
- "disabling IO/APIC support!\n");
- smp_found_config = 0;
- skip_ioapic_setup = 1;
- goto fake_ioapic_page;
- }
- } else {
-fake_ioapic_page:
- ioapic_phys = (unsigned long)
- alloc_bootmem_pages(PAGE_SIZE);
- ioapic_phys = __pa(ioapic_phys);
- }
- set_fixmap_nocache(idx, ioapic_phys);
- printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n",
- __fix_to_virt(idx), ioapic_phys);
- idx++;
- }
- }
-#endif
-}
-
-/*
- * This initializes the IO-APIC and APIC hardware if this is
- * a UP kernel.
- */
-int __init APIC_init_uniprocessor (void)
-{
- if (enable_local_apic < 0)
- clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
-
- if (!smp_found_config && !cpu_has_apic)
- return -1;
-
- /*
- * Complain if the BIOS pretends there is one.
- */
- if (!cpu_has_apic &&
- APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
- printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
- boot_cpu_physical_apicid);
- clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
- return -1;
- }
-
- verify_local_APIC();
-
- connect_bsp_APIC();
-
- /*
- * Hack: In case of kdump, after a crash, kernel might be booting
- * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
- * might be zero if read from MP tables. Get it from LAPIC.
- */
-#ifdef CONFIG_CRASH_DUMP
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
-#endif
- phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
-
- setup_local_APIC();
-
-#ifdef CONFIG_X86_IO_APIC
- if (smp_found_config)
- if (!skip_ioapic_setup && nr_ioapics)
- setup_IO_APIC();
-#endif
- setup_boot_clock();
-
- return 0;
-}
-
-/*
- * APIC command line parameters
- */
-static int __init parse_lapic(char *arg)
-{
- enable_local_apic = 1;
- return 0;
-}
-early_param("lapic", parse_lapic);
-
-static int __init parse_nolapic(char *arg)
-{
- enable_local_apic = -1;
- clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
- return 0;
-}
-early_param("nolapic", parse_nolapic);
-
-static int __init parse_disable_lapic_timer(char *arg)
-{
- local_apic_timer_disabled = 1;
- return 0;
-}
-early_param("nolapic_timer", parse_disable_lapic_timer);
-
-static int __init parse_lapic_timer_c2_ok(char *arg)
-{
- local_apic_timer_c2_ok = 1;
- return 0;
-}
-early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
-
-static int __init apic_set_verbosity(char *str)
-{
- if (strcmp("debug", str) == 0)
- apic_verbosity = APIC_DEBUG;
- else if (strcmp("verbose", str) == 0)
- apic_verbosity = APIC_VERBOSE;
- return 1;
-}
-
-__setup("apic=", apic_set_verbosity);
-
-
-/*
- * Local APIC interrupts
- */
-
-/*
- * This interrupt should _never_ happen with our APIC/SMP architecture
- */
-void smp_spurious_interrupt(struct pt_regs *regs)
-{
- unsigned long v;
-
- irq_enter();
- /*
- * Check if this really is a spurious interrupt and ACK it
- * if it is a vectored one. Just in case...
- * Spurious interrupts should not be ACKed.
- */
- v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1));
- if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
- ack_APIC_irq();
-
- /* see sw-dev-man vol 3, chapter 7.4.13.5 */
- printk(KERN_INFO "spurious APIC interrupt on CPU#%d, "
- "should never happen.\n", smp_processor_id());
- irq_exit();
-}
-
-/*
- * This interrupt should never happen with our APIC/SMP architecture
- */
-void smp_error_interrupt(struct pt_regs *regs)
-{
- unsigned long v, v1;
-
- irq_enter();
- /* First tickle the hardware, only then report what went on. -- REW */
- v = apic_read(APIC_ESR);
- apic_write(APIC_ESR, 0);
- v1 = apic_read(APIC_ESR);
- ack_APIC_irq();
- atomic_inc(&irq_err_count);
-
- /* Here is what the APIC error bits mean:
- 0: Send CS error
- 1: Receive CS error
- 2: Send accept error
- 3: Receive accept error
- 4: Reserved
- 5: Send illegal vector
- 6: Received illegal vector
- 7: Illegal register address
- */
- printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n",
- smp_processor_id(), v , v1);
- irq_exit();
-}
-
-/*
- * Initialize APIC interrupts
- */
-void __init apic_intr_init(void)
-{
-#ifdef CONFIG_SMP
- smp_intr_init();
-#endif
- /* self generated IPI for local APIC timer */
- set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
- /* IPI vectors for APIC spurious and error interrupts */
- set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
- set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-
- /* thermal monitor LVT interrupt */
-#ifdef CONFIG_X86_MCE_P4THERMAL
- set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-#endif
-}
-
-/**
- * connect_bsp_APIC - attach the APIC to the interrupt system
- */
-void __init connect_bsp_APIC(void)
-{
- if (pic_mode) {
- /*
- * Do not trust the local APIC being empty at bootup.
- */
- clear_local_APIC();
- /*
- * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's
- * local APIC to INT and NMI lines.
- */
- apic_printk(APIC_VERBOSE, "leaving PIC mode, "
- "enabling APIC mode.\n");
- outb(0x70, 0x22);
- outb(0x01, 0x23);
- }
- enable_apic_mode();
-}
-
-/**
- * disconnect_bsp_APIC - detach the APIC from the interrupt system
- * @virt_wire_setup: indicates, whether virtual wire mode is selected
- *
- * Virtual wire mode is necessary to deliver legacy interrupts even when the
- * APIC is disabled.
- */
-void disconnect_bsp_APIC(int virt_wire_setup)
-{
- if (pic_mode) {
- /*
- * Put the board back into PIC mode (has an effect only on
- * certain older boards). Note that APIC interrupts, including
- * IPIs, won't work beyond this point! The only exception are
- * INIT IPIs.
- */
- apic_printk(APIC_VERBOSE, "disabling APIC mode, "
- "entering PIC mode.\n");
- outb(0x70, 0x22);
- outb(0x00, 0x23);
- } else {
- /* Go back to Virtual Wire compatibility mode */
- unsigned long value;
-
- /* For the spurious interrupt use vector F, and enable it */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_VECTOR_MASK;
- value |= APIC_SPIV_APIC_ENABLED;
- value |= 0xf;
- apic_write_around(APIC_SPIV, value);
-
- if (!virt_wire_setup) {
- /*
- * For LVT0 make it edge triggered, active high,
- * external and enabled
- */
- value = apic_read(APIC_LVT0);
- value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
- APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
- APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
- value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
- apic_write_around(APIC_LVT0, value);
- } else {
- /* Disable LVT0 */
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
- }
-
- /*
- * For LVT1 make it edge triggered, active high, nmi and
- * enabled
- */
- value = apic_read(APIC_LVT1);
- value &= ~(
- APIC_MODE_MASK | APIC_SEND_PENDING |
- APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
- APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
- value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
- apic_write_around(APIC_LVT1, value);
- }
-}
-
-/*
- * Power management
- */
-#ifdef CONFIG_PM
-
-static struct {
- int active;
- /* r/w apic fields */
- unsigned int apic_id;
- unsigned int apic_taskpri;
- unsigned int apic_ldr;
- unsigned int apic_dfr;
- unsigned int apic_spiv;
- unsigned int apic_lvtt;
- unsigned int apic_lvtpc;
- unsigned int apic_lvt0;
- unsigned int apic_lvt1;
- unsigned int apic_lvterr;
- unsigned int apic_tmict;
- unsigned int apic_tdcr;
- unsigned int apic_thmr;
-} apic_pm_state;
-
-static int lapic_suspend(struct sys_device *dev, pm_message_t state)
-{
- unsigned long flags;
- int maxlvt;
-
- if (!apic_pm_state.active)
- return 0;
-
- maxlvt = lapic_get_maxlvt();
-
- apic_pm_state.apic_id = apic_read(APIC_ID);
- apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
- apic_pm_state.apic_ldr = apic_read(APIC_LDR);
- apic_pm_state.apic_dfr = apic_read(APIC_DFR);
- apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
- apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
- if (maxlvt >= 4)
- apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
- apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
- apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
- apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
- apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
- apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#ifdef CONFIG_X86_MCE_P4THERMAL
- if (maxlvt >= 5)
- apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
-#endif
-
- local_irq_save(flags);
- disable_local_APIC();
- local_irq_restore(flags);
- return 0;
-}
-
-static int lapic_resume(struct sys_device *dev)
-{
- unsigned int l, h;
- unsigned long flags;
- int maxlvt;
-
- if (!apic_pm_state.active)
- return 0;
-
- maxlvt = lapic_get_maxlvt();
-
- local_irq_save(flags);
-
- /*
- * Make sure the APICBASE points to the right address
- *
- * FIXME! This will be wrong if we ever support suspend on
- * SMP! We'll need to do this as part of the CPU restore!
- */
- rdmsr(MSR_IA32_APICBASE, l, h);
- l &= ~MSR_IA32_APICBASE_BASE;
- l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
- wrmsr(MSR_IA32_APICBASE, l, h);
-
- apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
- apic_write(APIC_ID, apic_pm_state.apic_id);
- apic_write(APIC_DFR, apic_pm_state.apic_dfr);
- apic_write(APIC_LDR, apic_pm_state.apic_ldr);
- apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
- apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
- apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
- apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
-#ifdef CONFIG_X86_MCE_P4THERMAL
- if (maxlvt >= 5)
- apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
-#endif
- if (maxlvt >= 4)
- apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
- apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
- apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
- apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
- apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
- local_irq_restore(flags);
- return 0;
-}
-
-/*
- * This device has no shutdown method - fully functioning local APICs
- * are needed on every CPU up until machine_halt/restart/poweroff.
- */
-
-static struct sysdev_class lapic_sysclass = {
- set_kset_name("lapic"),
- .resume = lapic_resume,
- .suspend = lapic_suspend,
-};
-
-static struct sys_device device_lapic = {
- .id = 0,
- .cls = &lapic_sysclass,
-};
-
-static void __devinit apic_pm_activate(void)
-{
- apic_pm_state.active = 1;
-}
-
-static int __init init_lapic_sysfs(void)
-{
- int error;
-
- if (!cpu_has_apic)
- return 0;
- /* XXX: remove suspend/resume procs if !apic_pm_state.active? */
-
- error = sysdev_class_register(&lapic_sysclass);
- if (!error)
- error = sysdev_register(&device_lapic);
- return error;
-}
-device_initcall(init_lapic_sysfs);
-
-#else /* CONFIG_PM */
-
-static void apic_pm_activate(void) { }
-
-#endif /* CONFIG_PM */