summaryrefslogtreecommitdiffstats
path: root/arch/i386/kernel/apic.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2005-10-31 19:16:17 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2005-10-31 19:16:17 -0800
commit1e4c85f97fe26fbd70da12148b3992c0e00361fd (patch)
treecd938308f7a151bf294a2af26019c73218225c9f /arch/i386/kernel/apic.c
parentd83c671fb7023f69a9582e622d01525054f23b66 (diff)
Revert "i386: move apic init in init_IRQs"
Commit f2b36db692b7ff6972320ad9839ae656a3b0ee3e causes a bootup hang on at least one machine. Revert for now until we understand why. The old code may be ugly, but it works. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'arch/i386/kernel/apic.c')
-rw-r--r--arch/i386/kernel/apic.c77
1 files changed, 16 insertions, 61 deletions
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 9204be6eedb..7c724ffa08b 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -803,7 +803,6 @@ no_apic:
void __init init_apic_mappings(void)
{
- unsigned int orig_apicid;
unsigned long apic_phys;
/*
@@ -825,11 +824,8 @@ void __init init_apic_mappings(void)
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
- orig_apicid = boot_cpu_physical_apicid;
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
- if ((orig_apicid != -1U) && (orig_apicid != boot_cpu_physical_apicid))
- printk(KERN_WARNING "Boot APIC ID in local APIC unexpected (%d vs %d)",
- orig_apicid, boot_cpu_physical_apicid);
+ if (boot_cpu_physical_apicid == -1U)
+ boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
#ifdef CONFIG_X86_IO_APIC
{
@@ -1259,81 +1255,40 @@ fastcall void smp_error_interrupt(struct pt_regs *regs)
}
/*
- * This initializes the IO-APIC and APIC hardware.
+ * This initializes the IO-APIC and APIC hardware if this is
+ * a UP kernel.
*/
-int __init APIC_init(void)
+int __init APIC_init_uniprocessor (void)
{
- if (enable_local_apic < 0) {
- printk(KERN_INFO "APIC disabled\n");
- return -1;
- }
+ if (enable_local_apic < 0)
+ clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
- /* See if we have a SMP configuration or have forced enabled
- * the local apic.
- */
- if (!smp_found_config && !acpi_lapic && !cpu_has_apic) {
- enable_local_apic = -1;
+ if (!smp_found_config && !cpu_has_apic)
return -1;
- }
/*
- * Complain if the BIOS pretends there is an apic.
- * Then get out because we don't have an a local apic.
+ * Complain if the BIOS pretends there is one.
*/
if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
- printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
- enable_local_apic = -1;
return -1;
}
verify_local_APIC();
- /*
- * Should not be necessary because the MP table should list the boot
- * CPU too, but we do it for the sake of robustness anyway.
- * Makes no sense to do this check in clustered apic mode, so skip it
- */
- if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
- printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
- boot_cpu_physical_apicid);
- physid_set(boot_cpu_physical_apicid, phys_cpu_present_map);
- }
-
- /*
- * Switch from PIC to APIC mode.
- */
connect_bsp_APIC();
- setup_local_APIC();
-#ifdef CONFIG_X86_IO_APIC
- /*
- * Now start the IO-APICs
- */
- if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
- setup_IO_APIC();
-#endif
- return 0;
-}
+ phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
-void __init APIC_late_time_init(void)
-{
- /* Improve our loops per jiffy estimate */
- loops_per_jiffy = ((1000 + HZ - 1)/HZ)*cpu_khz;
- boot_cpu_data.loops_per_jiffy = loops_per_jiffy;
- cpu_data[0].loops_per_jiffy = loops_per_jiffy;
-
- /* setup_apic_nmi_watchdog doesn't work properly before cpu_khz is
- * initialized. So redo it here to ensure the boot cpu is setup
- * properly.
- */
- if (nmi_watchdog == NMI_LOCAL_APIC)
- setup_apic_nmi_watchdog();
+ setup_local_APIC();
#ifdef CONFIG_X86_IO_APIC
- if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
- IO_APIC_late_time_init();
+ if (smp_found_config)
+ if (!skip_ioapic_setup && nr_ioapics)
+ setup_IO_APIC();
#endif
setup_boot_APIC_clock();
+
+ return 0;
}