[PATCH] kexec: x86 kexec core

This is the i386 implementation of kexec.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 120 insertions, 0 deletions

diff --git a/arch/i386/kernel/relocate_kernel.S b/arch/i386/kernel/relocate_kernel.S
new file mode 100644
index 00000000000..d312616effa
--- /dev/null
+++ b/arch/i386/kernel/relocate_kernel.S
@@ -0,0 +1,120 @@
+/*
+ * relocate_kernel.S - put the kernel image in place to boot
+ * Copyright (C) 2002-2004 Eric Biederman  <ebiederm@xmission.com>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+
+#include <linux/linkage.h>
+
+	/*
+	 * Must be relocatable PIC code callable as a C function, that once
+	 * it starts can not use the previous processes stack.
+	 */
+	.globl relocate_new_kernel
+relocate_new_kernel:
+	/* read the arguments and say goodbye to the stack */
+	movl  4(%esp), %ebx /* page_list */
+	movl  8(%esp), %ebp /* reboot_code_buffer */
+	movl  12(%esp), %edx /* start address */
+	movl  16(%esp), %ecx /* cpu_has_pae */
+
+	/* zero out flags, and disable interrupts */
+	pushl $0
+	popfl
+
+	/* set a new stack at the bottom of our page... */
+	lea   4096(%ebp), %esp
+
+	/* store the parameters back on the stack */
+	pushl   %edx /* store the start address */
+
+	/* Set cr0 to a known state:
+	 * 31 0 == Paging disabled
+	 * 18 0 == Alignment check disabled
+	 * 16 0 == Write protect disabled
+	 * 3  0 == No task switch
+	 * 2  0 == Don't do FP software emulation.
+	 * 0  1 == Proctected mode enabled
+	 */
+	movl	%cr0, %eax
+	andl	$~((1<<31)|(1<<18)|(1<<16)|(1<<3)|(1<<2)), %eax
+	orl	$(1<<0), %eax
+	movl	%eax, %cr0
+
+	/* clear cr4 if applicable */
+	testl	%ecx, %ecx
+	jz	1f
+	/* Set cr4 to a known state:
+	 * Setting everything to zero seems safe.
+	 */
+	movl	%cr4, %eax
+	andl	$0, %eax
+	movl	%eax, %cr4
+
+	jmp 1f
+1:
+
+	/* Flush the TLB (needed?) */
+	xorl	%eax, %eax
+	movl	%eax, %cr3
+
+	/* Do the copies */
+	movl	%ebx, %ecx
+	jmp	1f
+
+0:	/* top, read another word from the indirection page */
+	movl	(%ebx), %ecx
+	addl	$4, %ebx
+1:
+	testl	$0x1,   %ecx  /* is it a destination page */
+	jz	2f
+	movl	%ecx,	%edi
+	andl	$0xfffff000, %edi
+	jmp     0b
+2:
+	testl	$0x2,	%ecx  /* is it an indirection page */
+	jz	2f
+	movl	%ecx,	%ebx
+	andl	$0xfffff000, %ebx
+	jmp     0b
+2:
+	testl   $0x4,   %ecx /* is it the done indicator */
+	jz      2f
+	jmp     3f
+2:
+	testl   $0x8,   %ecx /* is it the source indicator */
+	jz      0b	     /* Ignore it otherwise */
+	movl    %ecx,   %esi /* For every source page do a copy */
+	andl    $0xfffff000, %esi
+
+	movl    $1024, %ecx
+	rep ; movsl
+	jmp     0b
+
+3:
+
+	/* To be certain of avoiding problems with self-modifying code
+	 * I need to execute a serializing instruction here.
+	 * So I flush the TLB, it's handy, and not processor dependent.
+	 */
+	xorl	%eax, %eax
+	movl	%eax, %cr3
+
+	/* set all of the registers to known values */
+	/* leave %esp alone */
+
+	xorl	%eax, %eax
+	xorl	%ebx, %ebx
+	xorl    %ecx, %ecx
+	xorl    %edx, %edx
+	xorl    %esi, %esi
+	xorl    %edi, %edi
+	xorl    %ebp, %ebp
+	ret
+relocate_new_kernel_end:
+
+	.globl relocate_new_kernel_size
+relocate_new_kernel_size:
+	.long relocate_new_kernel_end - relocate_new_kernel