Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 386 insertions, 0 deletions

diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
new file mode 100644
index 00000000000..be52c5ac4e0
--- /dev/null
+++ b/arch/i386/pci/fixup.c
@@ -0,0 +1,386 @@
+/*
+ * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include "pci.h"
+
+
+static void __devinit pci_fixup_i450nx(struct pci_dev *d)
+{
+	/*
+	 * i450NX -- Find and scan all secondary buses on all PXB's.
+	 */
+	int pxb, reg;
+	u8 busno, suba, subb;
+
+	printk(KERN_WARNING "PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
+	reg = 0xd0;
+	for(pxb=0; pxb<2; pxb++) {
+		pci_read_config_byte(d, reg++, &busno);
+		pci_read_config_byte(d, reg++, &suba);
+		pci_read_config_byte(d, reg++, &subb);
+		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+		if (busno)
+			pci_scan_bus(busno, &pci_root_ops, NULL);	/* Bus A */
+		if (suba < subb)
+			pci_scan_bus(suba+1, &pci_root_ops, NULL);	/* Bus B */
+	}
+	pcibios_last_bus = -1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
+
+static void __devinit pci_fixup_i450gx(struct pci_dev *d)
+{
+	/*
+	 * i450GX and i450KX -- Find and scan all secondary buses.
+	 * (called separately for each PCI bridge found)
+	 */
+	u8 busno;
+	pci_read_config_byte(d, 0x4a, &busno);
+	printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", pci_name(d), busno);
+	pci_scan_bus(busno, &pci_root_ops, NULL);
+	pcibios_last_bus = -1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx);
+
+static void __devinit  pci_fixup_umc_ide(struct pci_dev *d)
+{
+	/*
+	 * UM8886BF IDE controller sets region type bits incorrectly,
+	 * therefore they look like memory despite of them being I/O.
+	 */
+	int i;
+
+	printk(KERN_WARNING "PCI: Fixing base address flags for device %s\n", pci_name(d));
+	for(i=0; i<4; i++)
+		d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
+
+static void __devinit  pci_fixup_ncr53c810(struct pci_dev *d)
+{
+	/*
+	 * NCR 53C810 returns class code 0 (at least on some systems).
+	 * Fix class to be PCI_CLASS_STORAGE_SCSI
+	 */
+	if (!d->class) {
+		printk(KERN_WARNING "PCI: fixing NCR 53C810 class code for %s\n", pci_name(d));
+		d->class = PCI_CLASS_STORAGE_SCSI << 8;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810);
+
+static void __devinit pci_fixup_ide_bases(struct pci_dev *d)
+{
+	int i;
+
+	/*
+	 * PCI IDE controllers use non-standard I/O port decoding, respect it.
+	 */
+	if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
+		return;
+	DBG("PCI: IDE base address fixup for %s\n", pci_name(d));
+	for(i=0; i<4; i++) {
+		struct resource *r = &d->resource[i];
+		if ((r->start & ~0x80) == 0x374) {
+			r->start |= 2;
+			r->end = r->start;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
+
+static void __devinit  pci_fixup_ide_trash(struct pci_dev *d)
+{
+	int i;
+
+	/*
+	 * Runs the fixup only for the first IDE controller
+	 * (Shai Fultheim - shai@ftcon.com)
+	 */
+	static int called = 0;
+	if (called)
+		return;
+	called = 1;
+
+	/*
+	 * There exist PCI IDE controllers which have utter garbage
+	 * in first four base registers. Ignore that.
+	 */
+	DBG("PCI: IDE base address trash cleared for %s\n", pci_name(d));
+	for(i=0; i<4; i++)
+		d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, pci_fixup_ide_trash);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_11, pci_fixup_ide_trash);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_9, pci_fixup_ide_trash);
+
+static void __devinit  pci_fixup_latency(struct pci_dev *d)
+{
+	/*
+	 *  SiS 5597 and 5598 chipsets require latency timer set to
+	 *  at most 32 to avoid lockups.
+	 */
+	DBG("PCI: Setting max latency to 32\n");
+	pcibios_max_latency = 32;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
+
+static void __devinit pci_fixup_piix4_acpi(struct pci_dev *d)
+{
+	/*
+	 * PIIX4 ACPI device: hardwired IRQ9
+	 */
+	d->irq = 9;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci_fixup_piix4_acpi);
+
+/*
+ * Addresses issues with problems in the memory write queue timer in
+ * certain VIA Northbridges.  This bugfix is per VIA's specifications,
+ * except for the KL133/KM133: clearing bit 5 on those Northbridges seems
+ * to trigger a bug in its integrated ProSavage video card, which
+ * causes screen corruption.  We only clear bits 6 and 7 for that chipset,
+ * until VIA can provide us with definitive information on why screen
+ * corruption occurs, and what exactly those bits do.
+ *
+ * VIA 8363,8622,8361 Northbridges:
+ *  - bits  5, 6, 7 at offset 0x55 need to be turned off
+ * VIA 8367 (KT266x) Northbridges:
+ *  - bits  5, 6, 7 at offset 0x95 need to be turned off
+ * VIA 8363 rev 0x81/0x84 (KL133/KM133) Northbridges:
+ *  - bits     6, 7 at offset 0x55 need to be turned off
+ */
+
+#define VIA_8363_KL133_REVISION_ID 0x81
+#define VIA_8363_KM133_REVISION_ID 0x84
+
+static void __devinit pci_fixup_via_northbridge_bug(struct pci_dev *d)
+{
+	u8 v;
+	u8 revision;
+	int where = 0x55;
+	int mask = 0x1f; /* clear bits 5, 6, 7 by default */
+
+	pci_read_config_byte(d, PCI_REVISION_ID, &revision);
+
+	if (d->device == PCI_DEVICE_ID_VIA_8367_0) {
+		/* fix pci bus latency issues resulted by NB bios error
+		   it appears on bug free^Wreduced kt266x's bios forces
+		   NB latency to zero */
+		pci_write_config_byte(d, PCI_LATENCY_TIMER, 0);
+
+		where = 0x95; /* the memory write queue timer register is 
+				different for the KT266x's: 0x95 not 0x55 */
+	} else if (d->device == PCI_DEVICE_ID_VIA_8363_0 &&
+			(revision == VIA_8363_KL133_REVISION_ID || 
+			revision == VIA_8363_KM133_REVISION_ID)) {
+			mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5
+					causes screen corruption on the KL133/KM133 */
+	}
+
+	pci_read_config_byte(d, where, &v);
+	if (v & ~mask) {
+		printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
+			d->device, revision, where, v, mask, v & mask);
+		v &= mask;
+		pci_write_config_byte(d, where, v);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
+
+/*
+ * For some reasons Intel decided that certain parts of their
+ * 815, 845 and some other chipsets must look like PCI-to-PCI bridges
+ * while they are obviously not. The 82801 family (AA, AB, BAM/CAM,
+ * BA/CA/DB and E) PCI bridges are actually HUB-to-PCI ones, according
+ * to Intel terminology. These devices do forward all addresses from
+ * system to PCI bus no matter what are their window settings, so they are
+ * "transparent" (or subtractive decoding) from programmers point of view.
+ */
+static void __devinit pci_fixup_transparent_bridge(struct pci_dev *dev)
+{
+	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
+	    (dev->device & 0xff00) == 0x2400)
+		dev->transparent = 1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixup_transparent_bridge);
+
+/*
+ * Fixup for C1 Halt Disconnect problem on nForce2 systems.
+ *
+ * From information provided by "Allen Martin" <AMartin@nvidia.com>:
+ *
+ * A hang is caused when the CPU generates a very fast CONNECT/HALT cycle
+ * sequence.  Workaround is to set the SYSTEM_IDLE_TIMEOUT to 80 ns.
+ * This allows the state-machine and timer to return to a proper state within
+ * 80 ns of the CONNECT and probe appearing together.  Since the CPU will not
+ * issue another HALT within 80 ns of the initial HALT, the failure condition
+ * is avoided.
+ */
+static void __init pci_fixup_nforce2(struct pci_dev *dev)
+{
+	u32 val;
+
+	/*
+	 * Chip  Old value   New value
+	 * C17   0x1F0FFF01  0x1F01FF01
+	 * C18D  0x9F0FFF01  0x9F01FF01
+	 *
+	 * Northbridge chip version may be determined by
+	 * reading the PCI revision ID (0xC1 or greater is C18D).
+	 */
+	pci_read_config_dword(dev, 0x6c, &val);
+
+	/*
+	 * Apply fixup if needed, but don't touch disconnect state
+	 */
+	if ((val & 0x00FF0000) != 0x00010000) {
+		printk(KERN_WARNING "PCI: nForce2 C1 Halt Disconnect fixup\n");
+		pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
+
+/* Max PCI Express root ports */
+#define MAX_PCIEROOT	6
+static int quirk_aspm_offset[MAX_PCIEROOT << 3];
+
+#define GET_INDEX(a, b) (((a - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + b)
+
+static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
+{
+	return raw_pci_ops->read(0, bus->number, devfn, where, size, value);
+}
+
+/*
+ * Replace the original pci bus ops for write with a new one that will filter
+ * the request to insure ASPM cannot be enabled.
+ */
+static int quirk_pcie_aspm_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
+{
+	u8 offset;
+
+	offset = quirk_aspm_offset[GET_INDEX(bus->self->device, devfn)];
+
+	if ((offset) && (where == offset))
+		value = value & 0xfffffffc;
+	
+	return raw_pci_ops->write(0, bus->number, devfn, where, size, value);
+}
+
+static struct pci_ops quirk_pcie_aspm_ops = {
+	.read = quirk_pcie_aspm_read,
+	.write = quirk_pcie_aspm_write,
+};
+
+/*
+ * Prevents PCI Express ASPM (Active State Power Management) being enabled.
+ *
+ * Save the register offset, where the ASPM control bits are located,
+ * for each PCI Express device that is in the device list of
+ * the root port in an array for fast indexing. Replace the bus ops
+ * with the modified one.
+ */
+static void pcie_rootport_aspm_quirk(struct pci_dev *pdev)
+{
+	int cap_base, i;
+	struct pci_bus  *pbus;
+	struct pci_dev *dev;
+
+	if ((pbus = pdev->subordinate) == NULL)
+		return;
+
+	/*
+	 * Check if the DID of pdev matches one of the six root ports. This
+	 * check is needed in the case this function is called directly by the
+	 * hot-plug driver.
+	 */
+	if ((pdev->device < PCI_DEVICE_ID_INTEL_MCH_PA) ||
+	    (pdev->device > PCI_DEVICE_ID_INTEL_MCH_PC1))
+		return;
+
+	if (list_empty(&pbus->devices)) {
+		/*
+		 * If no device is attached to the root port at power-up or
+		 * after hot-remove, the pbus->devices is empty and this code
+		 * will set the offsets to zero and the bus ops to parent's bus
+		 * ops, which is unmodified.
+	 	 */
+		for (i= GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i)
+			quirk_aspm_offset[i] = 0;
+
+		pbus->ops = pbus->parent->ops;
+	} else {
+		/*
+		 * If devices are attached to the root port at power-up or
+		 * after hot-add, the code loops through the device list of
+		 * each root port to save the register offsets and replace the
+		 * bus ops.
+		 */
+		list_for_each_entry(dev, &pbus->devices, bus_list) {
+			/* There are 0 to 8 devices attached to this bus */
+			cap_base = pci_find_capability(dev, PCI_CAP_ID_EXP);
+			quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)]= cap_base + 0x10;
+		}
+		pbus->ops = &quirk_pcie_aspm_ops;
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PA,	pcie_rootport_aspm_quirk );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PA1,	pcie_rootport_aspm_quirk );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PB,	pcie_rootport_aspm_quirk );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PB1,	pcie_rootport_aspm_quirk );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PC,	pcie_rootport_aspm_quirk );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PC1,	pcie_rootport_aspm_quirk );
+
+/*
+ * Fixup to mark boot BIOS video selected by BIOS before it changes
+ *
+ * From information provided by "Jon Smirl" <jonsmirl@gmail.com>
+ *
+ * The standard boot ROM sequence for an x86 machine uses the BIOS
+ * to select an initial video card for boot display. This boot video 
+ * card will have it's BIOS copied to C0000 in system RAM. 
+ * IORESOURCE_ROM_SHADOW is used to associate the boot video
+ * card with this copy. On laptops this copy has to be used since
+ * the main ROM may be compressed or combined with another image.
+ * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
+ * is marked here since the boot video device will be the only enabled
+ * video device at this point.
+ */
+
+static void __devinit pci_fixup_video(struct pci_dev *pdev)
+{
+	struct pci_dev *bridge;
+	struct pci_bus *bus;
+	u16 config;
+
+	if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
+		return;
+
+	/* Is VGA routed to us? */
+	bus = pdev->bus;
+	while (bus) {
+		bridge = bus->self;
+		if (bridge) {
+			pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
+						&config);
+			if (!(config & PCI_BRIDGE_CTL_VGA))
+				return;
+		}
+		bus = bus->parent;
+	}
+	pci_read_config_word(pdev, PCI_COMMAND, &config);
+	if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
+		pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
+		printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);